Additive Manufacturing: Current Status and Future Prospects

Part 10: Sustainability and Trust

Processing and additive manufacturing of bones for the teaching of human anatomy

Traditionally, the teaching of human anatomy in health sciences has been based on the use of cadaveric material and bone parts for practical study. The bone materials get deteriorated and hardly mark the points of insertion of muscles. However, the advent of new technologies for 3D printing and creation of 3D anatomical models applied to teaching, has enabled to overcome these problems making teaching more dynamic, realistic and attractive. This paper presents some examples of the construction of three-dimensional models of bone samples, designed using 3D scanners for posterior printing with addition printers or polymer injection printers.

Advanced Functional Organic-Inorganic Hybrid (Nano)Materials: from Theranostics to Organic Electronics and Additive Manufacturing

This work is going to show the activities performed in the frame of my PhD studies at the University of Bologna, under the supervision of Prof. Mauro Comes Franchini, at the Department of Industrial Chemistry “Toso Montanari”. The main topic of this dissertation will be the study of organic-inorganic hybrid nanostructures and materials for advanced applications in different fields of materials technology and development such as theranostics, organic electronics and additive manufacturing, also known as 3D printing. This work is therefore divided into three chapters, that recall the fundamentals of each subject and to recap the state-of-the-art of scientific research around each topic. In each chapter, the published works and preliminary results obtained during my PhD career will be discussed in detail.

L'additive manufacturing nel planning pre-operatorio in chirurgia maxillofacciale

Il 3D printing è presente da tempo in molti settori economici e da sempre ha nella sanità uno dei principali ambiti di applicazione. Durante il corso del presente lavoro sono state esaminate le principali applicazioni in campo sanitario con particolare focus sulla fase di planning in caso di chirurgia complessa. La pianificazione risulta essere la fase maggiormente impattante nel contesto più globale di gestione del paziente in quanto una maggior accuratezza nella visualizzazione del caso clinico consente di ottimizzare l’identificazione di un adeguato approccio chirurgico con ovvie conseguenti ripercussioni positive sulla totalità della degenza del paziente all’interno della struttura clinica ospitante. Nel dettaglio è stato valutato l’utilizzo di un innovativo protocollo di pre-planning e follow-up operatorio tramite la realizzazione di modelli stampati 3D a partire da immagini di diagnostica classica (TAC, MRI, 3Dscan) che hanno consentito di poter fornire allo specialista clinico di riferimento un prodotto che riproducendo perfettamente l’anatomia del soggetto (morfologia-proprietà fisiche del tessuto) ha consentito allo stesso un miglioramento delle usuali pratiche chirurgiche e terapeutiche in casi di elevata complessità in un arco temporale ristretto. I parametri utilizzati per la valutazione dei reali benefici dell’approccio esposto sono stati: tempi di pianificazione chirurgica e tempi di intervento all’interno di una più globale analisi dei costi associati. A fronte di un’indagine interna preventiva presso l’azienda ospedaliera ospitante sono stati designati i seguenti reparti come settori pilota: maxillofacciale, neurochirurgia e radiologia interventistica. Lo studio è stato svolto in collaborazione con l’ospedale M.Bufalini di Cesena in qualità di referente clinico e l’azienda Aid4Med Srl in qualità di azienda leader in pianificazione operatoria tramite ausili realizzati tramite tecniche di additive manufacturing.

Evaluation of recycled carbon fibers as PLA reinforcement for additive manufacturing applications

The increased exploitation of carbon fiber reinforced polymers (CFRP) is inevitably bringing about an increase in production scraps and end-of-life components, resulting in a sharp increase in CFRP waste. Therefore, it is of paramount importance to find efficient ways to reintroduce waste into the manufacturing cycle. At present, several recycling methods for treating CFRPs are available, even if all of them still have to be optimized. The step after CFRP recycling, and also the key to build a solid and sustainable CFRP recycling market, is represented by the utilization of Re-CFs. The smartest way to utilize recovered carbon fibers is through the manufacturing of recycled CFRPs, that can be done by re-impregnating the recovered fibers with a new polymeric matrix. Fused Filament Fabrication (FFF) is one of the most widely used additive manufacturing (3D printing) techniques that fabricates parts with a polymeric filament deposition process that allows to produce parts adding material layer-by-layer, only where it is needed, saving energy, raw material cost, and waste. The filament can also contain fillers or reinforcements such as recycled short carbon fibers and this makes it perfectly compliant with the re-application of the shortened recycled CF. Therefore, in this thesis work recycled and virgin carbon fiber reinforced PLA filaments have been initially produced using 5% and 10% of CFs load. Properties and characteristics of the filaments have been determined conducting different analysis (TGA, DMA, DSC). Subsequently the 5%wt. Re-CFs filament has been used to 3D print specimens for mechanical characterization (DMA, tensile test and CTE), in order to evaluate properties of printed PLA composites containing Re-CFs and evaluate the feasibility of Re-CFs in 3D printing application.

Advanced Organic Materials: from Additive Manufacturing to Organic Electronics and Biomedical Applications

This manuscript represents an overview on the studies I was involved in during my PhD at the Industrial Chemistry Department “Toso Montanari”, in the ASOM (Advanced Smart Organic Materials) research group under the supervision of Prof. Letizia Sambri and Prof. Mauro Comes Franchini. Those research have been focused on the development of organic materials for advanced applications in different fields, among which organic electronics, additive manufacturing (3D Printing) and biomedical applications can be underlined.

Production and characterization of novel thermoplastic (nano)composite materials for additive manufacturing applications

The increasing environmental global regulations have directed scientific research towards more sustainable materials, even in the field of composite materials for additive manufacturing. In this context, the presented research is devoted to the development of thermoplastic composites for FDM application with a low environmental impact, focusing on the possibility to use wastes from different industrial processes as filler for the production of composite filaments for FDM 3D printing. In particular carbon fibers recycled by pyro-gasification process of CFRP scraps were used as reinforcing agent for PLA, a biobased polymeric matrix. Since the high value of CFs, the ability to re-use recycled CFs, replacing virgin ones, seems to be a promising option in terms of sustainability and circular economy. Moreover, wastes from different agricultural industries, i.e. wheat and rice production processes, were valorised and used as biofillers for the production of PLA-biocomposites. The integration of these agricultural wastes into PLA bioplastic allowed to obtain biocomposites with improved eco-sustainability, biodegradability, lightweight, and lower cost. Finally, the study of novel composites for FDM was extended towards elastomeric nanocomposite materials, in particular TPU reinforced with graphene. The research procedure of all projects involves the optimization of production methods of composite filaments with a particular attention on the possible degradation of polymeric matrices. Then, main thermal properties of 3D printed object are evaluated by TGA, DSC characterization. Additionally, specific heat capacity (CP) and Coefficient of Linear Thermal Expansion (CLTE) measurements are useful to estimate the attitude of composites for the prevention of typical FDM issues, i.e. shrinkage and warping. Finally, the mechanical properties of 3D printed composites and their anisotropy are investigated by tensile test using distinct kinds of specimens with different printing angles with respect to the testing direction.

What Bees Want: Algorithm-Aided Design di un'arnia progettata per le api e realizzata in Additive Manufacturing

L’importanza delle api per la vita sulla Terra ed il rischio alle quali sono sottoposte per via dell’azione dell’uomo sono ormai un dato di fatto. La concezione antropocentrica della natura e l’allevamento al solo fine produttivo di questi piccoli insetti, ha da sempre danneggiato il loro habitat e interferito con i loro cicli biologici. L’apicoltura, nata come un rapporto mutualistico in cui l’uomo offriva un rifugio alle api e loro in cambio provvedevano al suo nutrimento, si è trasformato in una dannosa dipendenza ed in un assoggettamento di questi insetti ai ritmi artificiali e tutt’altro che naturali della produzione rapida e seriale volta all’ottenimento di un profitto. Un’evidente prova di questa condizione, sono i rifugi per le api, le arnie. Ci siamo mai chiesti perché le arnie hanno questa forma? È quella che preferiscono le api, o quella che rende più pratici e veloci processi di costruzione, gestione e produzione? In natura le api colonizzano cavità quali tronchi cavi di alberi, forme lontane, per non dire diametralmente opposte a quelle in cui le vediamo vivere negli allevamenti. In questa ottica, il design e le nuove tecnologie, poste al servizio della Natura, conducono ad un punto di incontro tra le esigenze umane e quelle degli altri esseri viventi, delle api in questo caso. I concetti di Additive Manufacturing e Design Computazionale, permettono processi di produzione simili a quelli evolutivi naturali e trovano per questa motivazione un’applicazione ideale per progetti che si pongono come fine quello di discostarsi da una visione troppo artificiale, per riavvicinarsi alla perfezione e all’armonia delle leggi della Natura.

ADDITIVE MANUFACTURING: tecnologia innovativa per l'ottimizzazione di macchine elettriche

Lo scopo di questa tesi è quello di mostrare le potenzialità e le possibili soluzioni dell’Additive Manufacturing per l’ottimizzazione di macchine elettriche in risposta al problema delle terre rare. Nel primo capitolo viene presentato lo stato dell’arte dell’Additive Manufacturing mostrando una rapida panoramica delle sue caratteristiche principali, le potenzialità future e i settori di utilizzo. Il secondo capitolo propone le principali tecniche di Stampa 3D per la realizzazione di oggetti evidenziando di ognuna i pregi e i difetti. All’interno del terzo capitolo, viene illustrata la struttura di una macchina elettrica mostrando le varie componenti e presentando delle possibili ottimizzazioni realizzate tramite Additive Manufacturing. Nel quarto capitolo vengono presentati esempi di macchine elettriche complete realizzate attraverso le tecniche dell’Additive Manufacturing. Nel quinto capitolo vengono confrontati un Interior Permanent Magnets motor e un Synchronous Relectance Machine.

Optimization and characterization of a wheat-based biocomposite for additive manufacturing

In recent years plastic is a key material, fundamental for a large variety of implications. But its large utilization has the direct consequence of the disposal of tons of wastes, that in the major amount cannot be recycled. To pose a solution to the issue of the increasing amount of plastics that are rapidly accumulating all over the world, it is necessary to switch to biodegradable materials. This dissertation is focused on a biodegradable and biobased plastic (polylactic acid, PLA), in order to set free the material from the market and issues of oil, but the PLA is very expensive. For this reason it was added a part of natural component derived from wastes (wheat middling), that acts as reinforcement and decreases the cost of the final material forming a biocomposite. Since their interaction is difficult, the purpose of this dissertation is to improve the affinity between the PLA and the wheat middling.

Benchmarking di sistemi di additive manufacturing in termini di precisione di forma con ispirazione al sistema GD&T

Questo studio si pone come obiettivo lo sviluppo e la sperimentazione di un metodo per eseguire un benchmarking di due diversi sistemi di Additive Manufacturing mediante macchina di misura a coordinate Renishaw Cyclone. In particolare sono valutate le prestazioni in termini di precisione di forma di un sistema di tipo FDM e di uno di tipo PolyJet al fine di ottenere dati indicanti le potenzialità di queste due tecnologie per parti di piccole dimensioni. Dopo un’introduzione generale sull’Additive Manufacturing, si scende nei dettagli delle due tecniche oggetto dello studio e si discute di come strutturare il piano sperimentale in funzione degli obiettivi dell’attività e dei metodi scelti per l’acquisizione e la valutazione dei dati. Si parte, infatti, con la fabbricazione di un modello di benchmark, le cui geometrie vengono poi rilevate tramite una macchina di misura a coordinate per ottenere i valori di precisione di forma, che sono presentati come tolleranze geometriche del sistema GD&T. Successivamente, si descrivono tutte le fasi dell’attività sperimentale, iniziando con l’ideazione del modello di benchmark e proseguendo con i processi di fabbricazione e misurazione, per poi arrivare alla deduzione dei valori di precisione di forma tramite un post-processing dei dati. Infine, si presentano i valori di tolleranza ottenuti e si traggono le conclusioni riguardo la riuscita dell’attività sperimentale e il confronto tra le due tecnologie di Additive Manufacturing.

Reverse engineering in many-body quantum physics: Correspondence between many-body systems and effective single-particle equations

The mapping, exact or approximate, of a many-body problem onto an effective single-body problem is one of the most widely used conceptual and computational tools of physics. Here, we propose and investigate the inverse map of effective approximate single-particle equations onto the corresponding many-particle system. This approach allows us to understand which interacting system a given single-particle approximation is actually describing, and how far this is from the original physical many-body system. We illustrate the resulting reverse engineering process by means of the Kohn-Sham equations of density-functional theory. In this application, our procedure sheds light on the nonlocality of the density-potential mapping of density-functional theory, and on the self-interaction error inherent in approximate density functionals.

GUIsurfer: A Reverse Engineering Framework for User Interface Software

GUIsurfer: A Reverse Engineering Framework for User Interface Software

The GUISurfer tool: towards a language independent approach to reverse engineering GUI code

Graphical user interfaces (GUIs) are critical components of today's software. Developers are dedicating a larger portion of code to implementing them. Given their increased importance, correctness of GUIs code is becoming essential. This paper describes the latest results in the development of GUISurfer, a tool to reverse engineer the GUI layer of interactive computing systems. The ultimate goal of the tool is to enable analysis of interactive system from source code.

Combining Formal Methods and Functional Strategies Regarding the Reverse Engineering of Interactive Applications

Abstract. Graphical user interfaces (GUIs) make software easy to use by providing the user with visual controls. Therefore, correctness of GUI’s code is essential to the correct execution of the overall software. Models can help in the evaluation of interactive applications by allowing designers to concentrate on its more important aspects. This paper describes our approach to reverse engineer an abstract model of a user interface directly from the GUI’s legacy code. We also present results from a case study. These results are encouraging and give evidence that the goal of reverse engineering user interfaces can be met with more work on this technique.