VLANien käyttöönotto ja reititys kytkentäisessä lähiverkossa

Lähiverkkojen merkitys organisaatioiden toiminnassa on tänä päivänä tärkeämpi kuin koskaan aiemmin. Lähiverkot toimivat alustana useille tekniikoille ja palveluille. Lähiverkossa liikkuu dataliikenteen lisäksi myös puhetta ja kuvaa. Verkko mahdollistaa oheislaitteiden, kuten tiedostopalvelimien ja tulostimien, jakamisen ja käyttämisen koko verkon alueelta. Lähiverkkojen yhdistäminen voidaan toteuttaa teleoperaattoreiden toimesta, joten on vaikeaa enää määritellä lähiverkkoa tarkasti. Tämän diplomityön päätavoitteena oli muodostaa tehokas kytkentäinen lähiverkkoarkkitehtuuri. Keskeisenä osana työhön liittyy virtuaaliset lähiverkot, niiden käyttöönotto sekä reititys. Työn teoriaosassa käydään läpi lähiverkon ja tärkeimmän lähiverkkotekniikan, Ethernet-tekniikan peruselementit. Lisäksi käydään läpi TCP/IP- tekniikan periaate, sen keskeisimmät protokollat, VLAN-tekniikka sekä IP-reititys. Työosuudessa toteutettu Pilottiverkko muodostetaan Ciscon kytkin- ja reititinlaitteilla virtuaaliseen oppilaitosympäristöön. Pilottiverkon avulla esitetään vastaukset työn vaatimusmäärittelyihin, joita ovat verkon muunneltavuuden helppous, useiden broadcast-alueiden toteuttamisen mahdollisuus sekä käyttörajoituksiin perustuvan tietoturvan ja vikasietoisuuden mahdollistaminen verkossa.

A scheme for synchronizing clocks connected by a packet communication network

Consider a communication system in which a transmitter equipment sends fixed-size packets of data at a uniform rate to a receiver equipment. Consider also that these equipments are connected by a packet-switched network, which introduces a random delay to each packet. Here we propose an adaptive clock recovery scheme able of synchronizing the frequencies and the phases of these devices, within specified limits of precision. This scheme for achieving frequency and phase synchronization is based on measurements of the packet arrival times at the receiver, which are used to control the dynamics of a digital phase-locked loop. The scheme performance is evaluated via numerical simulations performed by using realistic parameter values. (C) 2011 Elsevier By. All rights reserved.

Metodología de Diseño y Análisis de Sistemas Teleoperados Considerando Dinámica No Lineal

Cuando la separación física entre el sistema local y remoto es relativamente corta, el retardo no es perceptible; sin embargo, cuando el manipulador local y el manipulador remoto se encuentran a una distancia lejana uno del otro, el retardo de tiempo ya no es insignificante e influye negativamente en la realización de la tarea. El retardo de tiempo en un sistema de control introduce un atraso de fase que a su vez degrada el rendimiento del sistema y puede causar inestabilidad. Los sistemas de teleoperación pueden sacar provecho de la posibilidad de estar presente en dos lugares simultáneamente, sin embargo, el uso de Internet y otras redes de conmutación de paquetes, tales como Internet2, impone retardos de tiempo variables, haciendo que los esquemas de control ya establecidos elaboren soluciones para hacer frente a inestabilidades causadas por estos retardos de tiempo variables. En este trabajo de tesis se presenta el modelado y análisis de un sistema de teloperación bilateral no lineal de n grados de libertad controlado por convergencia de estado. La comunicación entre el sitio local y remoto se realiza mediante un canal de comunicación con retardo de tiempo. El análisis presentado en este trabajo considera que el retardo puede ser constante o variable. Los principales objetivos de este trabajo son; 1) Desarrollar una arquitectura de control no lineal garantizando la estabilidad del sistema teleoperado, 2) Evaluar la estabilidad del sistema considerando el retardo en la comunicación, y 3) Implementación de los algoritmos desarrollados para probar el desempeño de los mismos en un sistema experimental de 3 grados de libertad. A través de la teoría de Estabilidad de Lyapunov y el funcional Lyapunov-Krasovskii, se demuestra que el sistema de lazo cerrado es asintóticamente estable. Estas conclusiones de estabilidad se han obtenido mediante la integración de la función de Lyapunov y aplicando el Lema de Barbalat. Se demuestra también que se logra sincronizar las posiciones del manipulador local y remoto cuando el operador humano no mueve el manipulador local y el manipulador remoto se mueve libremente. El esquema de control propuesto se ha validado mediante simulación y en forma experimental empleando un sistema de teleoperación real desarrollado en esta tesis doctoral y que consta de un un manipulador serie planar de tres grados de libertad, un manipulador local, PHANTOM Omni, el cual es un dispositivo haptico fabricado que consta de 3 grados de libertad (en fuerza) y que proporciona realimentación de fuerza en los ejes x,y,z. El control en tiempo real se ha diseñado usando el Sistema Operativo en Tiempo Real QuaRC de QUARC en el lado local y el Simulink Real-Time Windows TargetTM en el lado remoto. Para finalizar el resumen se destaca el impacto de esta tesis en el mundo científico a través de los resultados publicados: 2 artículos en revistas con índice de impacto , 1 artículo en una revista indexada en Sistemas, Cibernética e Informática, 7 artículos en congresos y ha obtenido un premio en la 9a. Conferencia Iberoamericana en Sistemas, Cibernética e Informática, 2010. ABSTRACT When the physical separation between the local and remote system is relatively short, the delay is not noticeable; however, when the local manipulator and the remote manipulator are at a far distance from each other, the time delay is no longer negligible and negatively influences the performance of the task. The time delay in a control system introduces a phase delay which in turn degrades the system performance and cause instability. Teleoperation systems can benefit from the ability to be in two places simultaneously, however, the use of Internet and other packet switched networks, such as Internet2, imposes varying time delays, making established control schemes to develop solutions to address these instabilities caused by different time delays. In this thesis work we present a modeling and analysis of a nonlinear bilateral teloperation system of n degrees of freedom controlled by state convergence strategy. Communication between the local and remote site is via a communication channel with time delay. The analysis presented in this work considers that the time-delay can be constant or variable. The main objectives of this work are; 1) Develop a nonlinear control schemes to ensure the stability of the teleoperated system, 2) Evaluate the system stability considering the delay in communication, and 3) Implementation of algorithms developed to test the performance of the teleoperation system in an experimental system of 3 degrees of freedom. Through the Theory of Stability of Lyapunov and the functional Lyapunov-Krasovskii, one demonstrates that the closed loop system is asymptotically stable.. The conclusions about stability were obtained by integration of the Lyapunov function and applying Barbalat Lemma. It further shows that the positions of the local and remote manipulator are synchronize when the human operator stops applying a constant force and the remote manipulator does not interact with the environment. The proposed control scheme has been validated by means of simulation and in experimental form using a developed system of real teleoperation in this doctoral thesis, which consists of a series planar manipulator of three degrees of freedom, a local manipulator, PHANTOM Omni, which is an haptic device that consists of 3 degrees of freedom (in force) and that provide feeback force in x-axis, and, z. The control in real time has been designed using the Operating system in Real time QuaRC of Quanser in the local side and the Simulink Real-Time Windows Target in the remote side. In order to finalize the summary, the highlights impact of this thesis in the scientific world are shows through the published results: 2 articles in Journals with impact factor, one article in a indexed Journal on Systemics, Cybernetics and Informatics, 7 articles in Conferences and has won an award in 9a. Conferencia Iberoamericana en Sistemas, Cibernética e Informática, 2010.

Enterprise networking:multilayer switching and applications

Primarily targeted toward the network or MIS manager who wants to stay abreast of the latest networking technology, Enterprise Networking: Multilayer Switching and Applications offers up to date information relevant for the design of modern corporate networks and for the evaluation of new networking equipment. The book describes the architectures and standards of switching across the various protocol layers and will also address issues such as multicast quality of service, high-availability and network policies that are requirements of modern switched networks.

Security enhancements and flaws of emerging communication technologies

The multi-faced evolution of network technologies ranges from big data centers to specialized network infrastructures and protocols for mission-critical operations. For instance, technologies such as Software Defined Networking (SDN) revolutionized the world of static configuration of the network - i.e., by removing the distributed and proprietary configuration of the switched networks - centralizing the control plane. While this disruptive approach is interesting from different points of view, it can introduce new unforeseen vulnerabilities classes. One topic of particular interest in the last years is industrial network security, an interest which started to rise in 2016 with the introduction of the Industry 4.0 (I4.0) movement. Networks that were basically isolated by design are now connected to the internet to collect, archive, and analyze data. While this approach got a lot of momentum due to the predictive maintenance capabilities, these network technologies can be exploited in various ways from a cybersecurity perspective. Some of these technologies lack security measures and can introduce new families of vulnerabilities. On the other side, these networks can be used to enable accurate monitoring, formal verification, or defenses that were not practical before. This thesis explores these two fields: by introducing monitoring, protections, and detection mechanisms where the new network technologies make it feasible; and by demonstrating attacks on practical scenarios related to emerging network infrastructures not protected sufficiently. The goal of this thesis is to highlight this lack of protection in terms of attacks on and possible defenses enabled by emerging technologies. We will pursue this goal by analyzing the aforementioned technologies and by presenting three years of contribution to this field. In conclusion, we will recapitulate the research questions and give answers to them.

Mobility Management in Packet Switched Mobile Networks

Nykyisin matkaviestinverkot ovat osa jokapäiväistä elämää. Merkittävimpiä eroja kiinteiden ja matkaviestinverkkojen välillä on käyttäjän liikkuvuus, joka voidaan määritellä mahdollisuudeksi soittaa ja vastaanottaa puheluita missä ja milloin tahansa. Työ selittää termin liikkuvuus ja määrittää ongelmat, jotka täytyy ratkaista liikkuvuuden aikaansaamiseksi sekä tavat, joilla nämä ongelmat on ratkaistu matkaviestinverkoissa. Työ luo yleiskatsauksen liikkuvuuden aikaansaamisessa käytettäviin menetelmiin, joita ovat haku, sijainnin päivitys, sijainnin seuranta ja kanavan vaihto. Työ keskittyy liikkuvuuteen kolmannen sukupolven matkaviestinverkkojen paketti-kytkentäisessä osassa, esimerkkinä liikkuvuuden hallinta UMTS:ssa (Universal Mobile Telecommunications System). Erot paketti- ja piirikytkentäisen osan välillä tuodaan esille ja selitetään. Jotta käyttäjät ja heidän päätteensä voisivat liikkua, tiedon täytyy kulkea verkon eri osien välillä. Merkinanto verkkoelementtien välillä ja liikkuvuuden mahdollistavien toimenpiteiden suoritus tehdään yhteyskäytännön avulla. Työ kuvaa yhteyskäytännöt, jotka ovat osallisena liikkuvuuden tarjontaan. Painopiste on GPRS:n liikkuvuuden-hallintayhteyskäytännössä, GMM:ssä. GMM protokollan prototyypin toteutus on esitetty työn käytännön osassa.

Gain switched multi-carrier transmitter and pilot tone based receiver for long reach access networks

A novel and cost effective long reach PON downlink scenario is proposed employing a multi-carrier transmitter and pilot tone aided direct detection at the receiver. Error free performance with QPSK and 50km transmission is presented. © 2012 OSA.

FWM Constraints Management for Lightpath Establishment in GMPLS Networks

In all-optical networks, management of physical layer restrictions should collaborate in lightpath establishment. Label-Switched Path validation in Generalized MultiProtocol Label Switching on Dense Wavelength Division Multiplexing network requires the treatment of the physical impairment-related parameters along the provisioned route. In this paper we propose, for the first time in our view, the generation of an optical layer database by simulation that specifically characterizes the dynamic FWM impairments for the lightpaths provisioned in a GMPLS/DWDM network.

A beam-forming network for a circular switched-beam phased array antenna

This paper reports on the design and development of a dividing/phasing network for a compact switched-beam array antenna for Land-vehicle mobile satellite communications, The device is formed by a switched radial divider/combiner and 1-bit phase shifters and generates a sufficient number of beams for the proper satellite tracking.

Design of switched-capacitor filters using low gain amplifiers

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Managing Packet Data (Sessions) in 3G Mobile Networks

Tällä hetkellä kolmannen sukupolven matkapuhelinjärjestelmät ovat siirtyneet kaupalliseen vaiheeseen. Universal Mobile Telecommunication System (UMTS) on eräs kolmannen sukupolven matkapuhelinjärjestelmä, jota tullaan käyttämään Euroopassa. Diplomityön päämääränä on tutkia, kuinka pakettivälitteistä tiedonsiirtoa hallitaan UMTS - verkoissa. Diplomityö antaa yleiskuvan toisen sukupolven matkapuhelinjärjestelmien datapalveluiden kehityksestä kolmannen sukupolven nopeisiin matkapuhelinjärjestelmiin. Pakettivälitteisen verkon verkkoarkkitehtuuri on esitetty sekä sen, diplomityön kannalta, tärkeimpien osien toiminnallisuus on selvitetty. Myös pakettipohjaisten datayhteyksien eli istuntojen muodostaminen ja vapauttaminen sekä aktiivisen yhteyden ominaisuuksien muokkaaminen on esitetty tässä diplomityössä. Yhteydenhallintaprotokolla, Session Management (SM), on yksi protokolla, joka osallistuu pakettidatayhteyden hallintaan. SM -protokolla on käsitelty työssä yksityiskohtaisesti. SM -protokollan SDL toteutus on esitetty diplomityön käytännönosassa

IPSec in 3G packet switched domain

Diplomityö käsittelee IPSec-protokollan (IP Security Protocol) implementointia UMTS:n (Universal Mobile Telecommunications System) pakettikytkentäiseen verkkoon. Runkoverkkoa käytetään mobiilikäyttäjän datan siirtämiseen sekä verkkoelementtien väliseen ohjausinformaation välitykseen. Koska UMTS:n runkoverkot ovat IP-pakettikytkentäisiä verkkoja, IPSec-protokollaa voidaan käyttää lähetettyjen IP-datasähkeiden suojaamiseen. IPSec- ja IKE-protokollien (Internet Key Exchange) käyttö on koettu monimutkaiseksi kiinteissä verkoissa. Tämän saman ongelman edessä tulevat olemaan myös operaattorit, kun he alkavat rakentaa UMTS-verkkojaan. On kuitenkin muistettava se, että tulevaisuudessa lähes kaikki data mukaanlukien ääni ja video on tarkoitus siirtää IP-protokollan avulla. IP-teknologiaan perustuva tiedonsiirron kasvu lisää IPSec-protokollan merkitystä ei ainoastaan runkoverkossa mutta myös radioliityntäverkoissa sekä SS7-merkinantoverkoissa (Signaling System No. 7). Diplomityö on tehty osaksi diplomi-insinöörin tutkintoa Lappeenrannan teknillisessä yliopistossa. Työ on tehty Nokia Networksin palveluksessa Helsingissä, vuosien 2002 ja 2003 välisenä aikana.

Improving Label Space Usage for Ethernet Label Switched Paths

Ethernet is becoming the dominant aggregation technology for carrier transport networks; however, as it is a LAN technology, native bridged ethernet does not fulfill all the carrier requirements. One of the schemes proposed by the research community to make ethernet fulfill carrier requirements is ethernet VLAN-label switching (ELS). ELS allows the creation of label switched data paths using a 12-bit label encoded in the VLAN TAG control information field. Previous label switching technologies such as MPLS use more bits for encoding the label. Hence, they do not suffer from label sparsity issues as ELS might. This paper studies the sparsity issues resulting from the reduced ELS VLAN-label space and proposes the use of the label merging technique to improve label space usage. Experimental results show that label merging considerably improves label space usage

Exploring Adaptive Implementation of On-Chip Networks

As technology geometries have shrunk to the deep submicron regime, the communication delay and power consumption of global interconnections in high performance Multi- Processor Systems-on-Chip (MPSoCs) are becoming a major bottleneck. The Network-on- Chip (NoC) architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication issues such as performance limitations of long interconnects and integration of large number of Processing Elements (PEs) on a chip. The choice of routing protocol and NoC structure can have a significant impact on performance and power consumption in on-chip networks. In addition, building a high performance, area and energy efficient on-chip network for multicore architectures requires a novel on-chip router allowing a larger network to be integrated on a single die with reduced power consumption. On top of that, network interfaces are employed to decouple computation resources from communication resources, to provide the synchronization between them, and to achieve backward compatibility with existing IP cores. Three adaptive routing algorithms are presented as a part of this thesis. The first presented routing protocol is a congestion-aware adaptive routing algorithm for 2D mesh NoCs which does not support multicast (one-to-many) traffic while the other two protocols are adaptive routing models supporting both unicast (one-to-one) and multicast traffic. A streamlined on-chip router architecture is also presented for avoiding congested areas in 2D mesh NoCs via employing efficient input and output selection. The output selection utilizes an adaptive routing algorithm based on the congestion condition of neighboring routers while the input selection allows packets to be serviced from each input port according to its congestion level. Moreover, in order to increase memory parallelism and bring compatibility with existing IP cores in network-based multiprocessor architectures, adaptive network interface architectures are presented to use multiple SDRAMs which can be accessed simultaneously. In addition, a smart memory controller is integrated in the adaptive network interface to improve the memory utilization and reduce both memory and network latencies. Three Dimensional Integrated Circuits (3D ICs) have been emerging as a viable candidate to achieve better performance and package density as compared to traditional 2D ICs. In addition, combining the benefits of 3D IC and NoC schemes provides a significant performance gain for 3D architectures. In recent years, inter-layer communication across multiple stacked layers (vertical channel) has attracted a lot of interest. In this thesis, a novel adaptive pipeline bus structure is proposed for inter-layer communication to improve the performance by reducing the delay and complexity of traditional bus arbitration. In addition, two mesh-based topologies for 3D architectures are also introduced to mitigate the inter-layer footprint and power dissipation on each layer with a small performance penalty.

Improving Label Space Usage for Ethernet Label Switched Paths

Ethernet is becoming the dominant aggregation technology for carrier transport networks; however, as it is a LAN technology, native bridged ethernet does not fulfill all the carrier requirements. One of the schemes proposed by the research community to make ethernet fulfill carrier requirements is ethernet VLAN-label switching (ELS). ELS allows the creation of label switched data paths using a 12-bit label encoded in the VLAN TAG control information field. Previous label switching technologies such as MPLS use more bits for encoding the label. Hence, they do not suffer from label sparsity issues as ELS might. This paper studies the sparsity issues resulting from the reduced ELS VLAN-label space and proposes the use of the label merging technique to improve label space usage. Experimental results show that label merging considerably improves label space usage