Natural colonization of leaves of 'Pêra' sweet orange and related varieties by Guignardia citricarpa

The purpose of this research was to evaluate the differences in the colonization and production of structures in the leaves of 'Pêra' sweet orange (Citrus sinensis) clones and related varieties by Guignardia citricarpa. The natural colonization and the production of reproductive structures in the leaves and in vitro of ten 'Pêra' sweet orange was quantified in the following clones: Bianchi, Dibbern C.V., EEL, IAC 2000, Olímpia 15161, Premunizada 1212, Premunizada 1743/82, R. Gullo 1569/244, R. Gullo 1570/246 and Vimusa; and in five related varieties: Redonda C.N, Ovale 968, Ovale San Lio 969, Lamb Summer and Corsa Tardia. The quantification of the colonization density of G. citricarpa in the leaves was obtained through isolation. Incidence and colonization density (cm²) were calculated for each clone. The production of reproductive structures was accomplished through the moistening and drying process of the leaves. The incidence (percentage of affected leaves) and the leaf surface percentage occupied by the reproductive fungus structures were quantified. The in vitro production of reproductive structures was accomplished in water-agar medium. The number of immature and total reproductive fungus structures (cm²), and the percentage of picnidia with liberation of spores were quantified. Significant differences were not observed among clones related to the colonization of the leaves. But there were differences in the induction experiments, i.e., in the leaf surface percentage occupied by the reproductive fungus structures and the in vitro production of reprodutive fungus structures.

Early detection of injuries in leaves of Clusia hilariana Schltdl. (Clusiaceae) caused by particulate deposition of iron

This study aims to evaluate the prognostic value of microscopic parameters of asymptomatic leaves of Clusia hilariana Schltdl. subjected to particulate deposition of iron (2.14 mg cm-2 day-1) for 45 consecutive days. Samples of young and expanded leaves without symptoms were collected and subjected to light and scanning electron microscopy techniques. The height of the epidermal cells on both surfaces of the leaf and the thickness of the hypodermis, the chlorophyll parenchyma, and the leaf blade were measured. Micromorphological injury occurred in the abaxial surface of young leaves and on both surfaces of expanded leaves. Erosion of the epicuticular wax and cuticle rupture were frequent on the adaxial surface, while on the abaxial surface of both leaves there was a loss of sinuosity on the anticlinal wall of the epidermal cells, stomatal deformity and obstruction. Micromorphometric alterations were seen in all leaf tissues except in the height of epidermic cells, probably due to the thick cuticle and prominent cuticular flanges. The highest difference in thickness of the leaf blade was seen in young leaves of plants subjected to SPMFe, indicating greater sensibility to particulate iron in comparison to the expanded leaves. The micromorphological and micromorphometric alterations in the leaf blade of Clusia hilariana Schltdl. showed the prognostic potential of these tools on the evaluation of impacts caused by the deposition of particulate matter, especially in the 'Restinga' natural vegetation, where the exposure is increasing due to the presence of iron ore industry in their surroundings.

Physical characteristics of oily spraying liquids and droplets formed on coffee leaves and glass surfaces

The physical characteristics of a spray liquid are important in getting a good droplet formation and control efficiency over a particular target. As a function of these characteristics, it is possible to decipher which is the best adjuvant based on the respective concentration used during the spray. Therefore, ten spraying liquids were prepared, which varied in concentrations of pesticide lufenuron + profenofos, mineral oil, water and manganese sulfate. Pendant droplets formed from these mixtures were measured to examine their impact on surface tension. Droplets were applied to the surface of coffee leaves and the surface tension, contact angle formed and the leaf area wetted by the droplet, were measured. A smooth glass surface was taken as a comparative to the coffee leaves. The highest concentrations of oil resulted in lower surface tension, smaller contact angles of droplets on leaf surfaces and larger areas wetted by the droplets. Both surfaces showed hydrophilic behavior.

Ultrastructure of the intercellular protuberances in leaves of Paepalanthus superbus Ruhl. (Eriocaulaceae)

Mature leaves of Paepalanthus superbus exhibit intercellular protuberances between the inner periclinal walls of the epidermal and the parenchyma cells surface, as well as on the surface of the parenchyma mesophyll cells. These structures are mostly prominent around the parenchyma cells, forming a gel capsule-like structure. Histochemical tests with ruthenium red indicate the pectic nature of the intercellular deposits, with scattered lipidic inclusions as revealed by sudan IV and sudan black B. Ultrastructural analyses show a fibrillar matrix with scattered fimbriate and tubular structures, and a distinct margin delimited by a dense membrane-like structure. Our results suggest that the protuberances are derived from secretory activity, and are formed after the development of the intercellular spaces. For P. superbus this structure may represent an important cell wall specialisation, related with the adhesion and transport mechanisms between cells.

Interpreting Differential Temperature Trends at the Surface and in the Lower Troposphere

Estimated global-scale temperature trends at Earth's surface (as recorded by thermometers) and in the lower troposphere (as monitored by satellites) diverge by up to 0.14°C per decade over the period 1979 to 1998. Accounting for differences in the spatial coverage of satellite and surface measurements reduces this differential, but still leaves a statistically significant residual of roughly 0.1°C per decade. Natural internal climate variability alone, as simulated in three state-of-the-art coupled atmosphere-ocean models, cannot completely explain this residual trend difference. A model forced by a combination of anthropogenic factors and volcanic aerosols yields surface-troposphere temperature trend differences closest to those observed.

Effects of the Ottonia martiana Miq. (Piperaceae) extract on dog's ocular surface

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dolomite and phosphogypsum surface application effects on annual crops nutrition and yield

Brazil has extensive area with acid soils. Using phosphogypsum and soil acidity tolerant cultivars are alternatives to crop establishment in no-till system without previous limestone incorporation in many agricultural soils of Brazil. However, it remains unknown how phosphogypsum and limestone surface application affects rice (Oryza sativa L.) and common bean (Phaseolus vulgaris L.) nutrition and yield under a no-till system. A field experiment was conducted in a sandy clay loam, kaolinitic, thermic Typic Haplorthox, previously cultivated under conventional tillage, in Botucatu, Sao, Paulo State, Brazil. Treatments included four dolomitic limestone rates (0, 1100, 2700, and 4300 kg ha(-1)), two phosphogypsum rates (0 and 2100 kg ha(-1)), and two upland rice cultivars (Caiapo and IAC 202). in 2002-2003, and two bean cultivars (Perola and Carioca), in 2003-2004. Both amendments were applied on the surface, without soil incorporation. The content of Ca, Mg, and Mn in flag leaves and rice yield increased with limestone surface application. Liming increased the shoot dry matter of IAC 202 rice. Phosphogypsum increased S contents in leaves of both rice cultivars, and resulted in higher grain yield in the Caiapo rice. Liming increased K contents in leaves of both bean cultivars. In the absence of phosphogypsum, liming increased S contents and grain yield of bean. Content of Mg in leaves was reduced by phosphogypsum in lower limestone rates. In phosphogypsum presence, liming reduced Zn contents in leaves and increased bean shoot dry matter. Phosphogypsum increased Ca and S, and reduced Mg contents in bean leaves. Using soil acidity tolerant cultivars promoted higher crop yields in no-till systems establishment, even when the effective soil amelioration had not yet been achieved.

Ultrastructure of the intercellular protuberances in leaves of Paepalanthus superbus Ruhl. (Eriocaulaceae)

Folhas adultas de Paepalanthus superbus mostram protuberâncias intercelulares, entre a parede periclinal interna das células epidérmicas e superfície de células parenquimáticas; depósitos semelhantes ocorrem na superfície das células parenquimáticas do mesofilo. Estas protuberâncias são mais proeminentes ao redor de células parenquimáticas, formando uma estrutura que lembra uma cápsula gelatinosa. Testes histoquímicos com vermelho de rutênio evidenciam sua natureza péctica, com inclusões lipídicas dispersas, detectadas por sudan IV e sudan black B. Ultra-estruturalmente as protuberâncias mostram matriz fibrilar permeada por estruturas fimbriadas e tubulares, com margem distinta formada por estrutura membranosa. Nossos resultados sugerem que estas protuberâncias são derivadas de atividade secretora, sendo formadas após o desenvolvimento dos espaços intercelulares. em P. superbus esta estrutura pode representar uma especialização da parede celular, relacionada com adesão e mecanismos de transporte entre células.

Assessing the role of vertical leaves within the photosynthetic function of Styrax camporum under drought conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Intercellular pectic protuberances in leaves of some Xyris species (Xyridaceae)

Mature leaves of eight species of Xyris were prepared by standard methods for electron transmission microscopy. Wartlike intercellular pectic protuberances were observed on the surface of inner periclinal walls of epidermal cells in Xyris obcordata, Xyris hymenachne, and Xyris pterygoblephara. In the latter, the protuberances also occur on the surface of parenchymatic mesophyll cells; they frequently project into intercellular spaces and may connect opposing cells. For the genus Xyris, the intercellular pectic protuberances may be considered taxonomically significant at the species level.

Optimisation of conditions for the extraction of casearins from Casearia sylvestris using response surface methodology

Optimal conditions for the extraction of casearins from Casearia sylvestris were determined using response surface methodology. The maceration and sonication extraction techniques were performed using a 3 x 3 x 3 full factorial design including three acidity conditions, three solvents of different polarities and three extraction times. The yields and selectivities of the extraction of casearins were significantly influenced by acidity conditions. Taking into account all variables tested, the optimal conditions for maceration extraction were estimated to involve treatment with dichloromethane saturated with ammonium hydroxide for 26 h. Similar yields and selectivities for casearins were determined for sonication extraction using the same solvent but for the much shorter time of I h. The best results for stabilisation of the fresh plant material were obtained using leaves that had been oven dried at 40 degrees C for 48 h. Copyright (c) 2006 John Wiley & Sons, Ltd.

Kinetics of zinc uptake and anatomy of roots and leaves of coffee trees as affected by zinc nutrition

Zinc (Zn) uptake kinetics and root and leaf anatomy were studied in coffee trees grown in nutrient solutions with or without Zn. Leaves and roots were sampled and cuts were made in the medium part of the leaves and in root tips and observed under an optical microscope. Plants grown without Zn showed an increase in root and in root stele diameter. There was also an increase in epidermis thickness and in the cross-sectional area of the cortex and stele due to Zn deficiency, but the diameter of xylem vessels was decreased. An increase in root cortex and stele diameter provided for an increased surface for nutrient uptake. Accordingly, C(min) was decreased from 13.8 to 3.4 mu mol L(-1) and V(max) increased from 0.50 to 2.1 mu mol cm(-2) h(-1) .

Artificial neural networks for machining processes surface roughness modeling

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Submicroscopical features of leaves of xyris species

The leaf infrastructure of five Xyris species were examined using scanning electron microscope (SEM), transmission electron microscope (TEM) and histochemical methods. All studied leaves show some features in epidermis and mesophyll, which were of considerable adaptative significance to drought stress. Such features included the occurrence of a pectic layer on the stomatal guard cells and the presence of a nehvork ofpectic compounds in the cuticle. Pectic compunds were also in abundance in lamellated walls of the mesophyll cells and on the inner surface of the sclerified cell walls of the vascular bundle sheaths. There were also specialized chlorenchymatous peg cells in the mesophyll and drops of phenolic compounds inside the epidermal cells.

Seed and seedling surface-sterilization for in vitro culture of tillandsia gardneri (Bromeliaceae)

Tillandsia gardneri is a bromeliad with ornamental value and a wide geographical distribution over Brazil. However, due to habitat loss and illegal overcollection in the wild it is included as a vulnerable species in the official list of endangered plants of the State of Rio Grande do Sul, Brazil. The development of a protocol for T. gardneri seed propagation in vitro may be useful for reintroducing plants in their natural habitats, and for germplasm conservation. A difficult problem encountered during the establishment of an in vitro culture is explants disinfection, especially when working with endangered species, from which explant availability is restricted. Thus, the establishment of a sterilization protocol is crucial for the initiation and success of a micropropagation system for T. gardneri. The objective of this study was to evaluate the effect of sodium hypochlorite concentration and exposure time in seed and seedling surface disinfection, tissue sensitivity and development. Sodium hypochlorite solutions (10 or 20%/5, 10 or 15 min; 25%/5 or 10 min; and 50%/5 min) were effective in eliminating seed superficial contaminants. There was no significant difference among the effective sterilization treatments in relation to seed germination (%), and seedling length and number of leaves, after 120 days in vitro. Also, no damage to seed and seedling tissues were observed. Surface sterilization of seedlings, for initiation of an in vitro culture, required higher concentrations of sodium hypochlorite (25%/15 min; 20 or 50%/5, 10 or 15 min; and 40%/5 and 10 min) for controlling fungal and yeast contamination, compared to seed sterilization. No significant differences among these treatments were found in relation to seedling length and number of leaves, after 60 days in vitro.