Metodología para la evaluación del impacto del ruido ambiental producido por la maquinaria en minería a cielo abierto

En muchos países el ruido se ha convertido en un gran problema para la salud de la población, no solo en el puesto de trabajo sino también durante la vida cotidiana. Este aumento en la contaminación acústica es producido en gran medida a la industrialización que se ha producido en estos países y a la mayor cercanía entre zonas industriales, zonas de ocio y zonas de descanso. La industria minera es una de las actividades industriales que más pueden contribuir al aumento de la contaminación acústica debido a la naturaleza de las operaciones que se llevan a cabo en las explotaciones. Por ello este documento tiene por objetivo realizar una metodología para la evaluación del ruido ambiental producido por la maquinaria utilizada en las explotaciones a cielo abierto. Además se desarrolla la aplicación de la metodología establecida en un caso práctico determinando el mapa de ruido de una cantera a cielo abierto. Abstract Noise has become a very important problem for human health in many countries, not only in the working place but in daily life as well. This raising in the acoustic pollution is mainly due to the industralization generated in these countries and also to the greater proximity in the industrial, leisure and residential areas. Mining industry is one of the industrial activities that contribute more to the raising of acoustic pollution due to the nature of the works which are taking place in the mining development. That is why the purpose of this project is to develop a methodology to evaluate the enviromental noise produced by the machinery used in surface mining. Also a case study has been developed to apply the methodology described to a surface quarry operation.

Aislamiento acústico a ruido aéreo en techos con materiales ecológicos

El incremento de la contaminación acústica se ha convertido en un problema medioambiental lo cual ha generado un aumento en la demanda del aislamiento de los edificios para lograr el confort acústico. Existen métodos de medición de aislamiento acústico a ruido aéreo de fachadas bajo ensayo “in situ” pero no para techos. El objetivo de esta investigación consiste en determinar el aislamiento acústico de prototipos de techos ecológicos multicapas adaptando la metodología recomendada por normas internacionales. Se propusieron cuatro prototipos de techos con distintos materiales naturales como especies vegetales y sustratos de fibra de coco, superpuestos sobre un techo base liviano. Al sustrato se le varió su espesor de 10 a 20 cm, sus condiciones seca o húmeda y su densidad: 100%, 66% y 33% fibra de coco. En los resultados se determinó que las especies vegetales no aportaron aislamiento, pero al incrementar el espesor y densidad del sustrato mejoró el aislamiento sonoro. También se determinó que el aislamiento acústico en condición seca fue mejor que en condición húmeda. Se planteó una metodología para determinar el aislamiento acústico a ruido aéreo en techos bajo ensayo “in situ” empleando el método global con altavoz, ésta se estructuró en tres partes: la primera describe el módulo experimental y la plataforma tecnológica; la segunda aborda procedimientos para medir los niveles de presión sonora, niveles de ruido de fondo y los tiempos de reverberación, en bandas de frecuencia de tercios de octava; en la tercera se explica el cálculo de los promedios de estos parámetros, así como también la diferencia de niveles estandarizada, el índice de reducción sonora aparente con sus valores globales y su incertidumbre. Así mismo, se determinó un algoritmo de predicción del aislamiento acústico, analizando los valores obtenidos en las mediciones “in situ” como la Diferencia de nivel estandarizada ponderada y el Índice ponderado de reducción sonora, los cuales se relacionaron con el peso y el espesor de los materiales de las diferentes multicapas. A través de un análisis de regresión se establecieron modelos para predecir la Diferencia de nivel estandarizada y el Índice de reducción sonora aparente en bandas de octavas. Los resultados del modelo propuesto son cercanos a los datos medidos “in situ”. Por otra parte, se realizaron mediciones térmicas en un módulo experimental y otro de referencia en tres períodos del día. En el módulo experimental se construyeron los prototipos de techos ecológicos y en el de referencia un techo de construcción tradicional, se compararon los resultados de ambos módulos y su interacción con la temperatura exterior. Se detectó que las temperaturas internas del módulo experimental en condición seca tienden a mantener sus valores durante todo el día, en horas de la mañana sus valores son superiores a los del módulo de referencia y temperatura exterior. Al mediodía y en la tarde las temperaturas internas del módulo experimental son inferiores a las del módulo de referencia, incrementándose esta última a medida que aumenta temperatura exterior. Finalmente, a partir de las mediciones “in situ” se realizaron cuatro modelos de correlación acústica-térmica, los tres primeros relacionando la temperatura y el nivel de presión sonora en tres momentos del día, en la tarde se aprecia que a medida que aumenta la temperatura aumentan los niveles de presión sonora. En el cuarto modelo se estableció una correlación acústica-térmica entre la resistencia térmica de los materiales de las multicapas con su índice de reducción sonora, obteniéndose un coeficiente de correlación moderado. La presente investigación plantea retos desde el punto de vista ambiental, permite cuantificar el aislamiento acústico de los techos y mejorar la calidad de vida en áreas urbanas; el empleo de los materiales de procedencia local como los utilizados fomenta el respeto por la naturaleza y producen un menor impacto ambiental. ABSTRACT Sound contamination increase has generated a raise in insulation demand of buildings in order to achieve a sound comfort, and this has become into an environmental problem. There are measurements methods for air borne soundproofing in facades through “in situ” test but there are not for roofs. The purpose of this research is to determine sound insulation of multilayer green roof prototypes following the methodology suggested by international standards. Four prototypes of roofs with different types of vegetation and overlapped coconut fiber substrates over a light roof were proposed. Thickness of substrate varied from 10 to 20 cm, as well as its dry a humid condition and its density: 100%, 66% y 33% of coconut fiber. Results determined that vegetation did not contribute to insulation but when increasing substrate’s thickness and density, sound insulation was improved. Likewise, it was determined that sound insulation in dry condition was greater than in humid condition. A methodology to determine airborne sound insulation in roofs through “in situ” test using a speaker global method was stated. This was structured in three parts: the first part describes the experimental module and the technological platform; the second one establishes the procedures to measure sound pressure levels; levels of background noise and time of reverberation in frequency bands of thirds of octave, and in the third part, averages of these parameters, as well as the difference of standardized levels, the apparent sound reduction with its global values and uncertainty were calculated. Likewise, a prediction algorithm of sound insulation was determined by analyzing values obtained in “in-situ” measures such as the difference of weighted standardized level and the weighted index of sound reduction which they were related to weight and thickness of different multilayer materials. Models to predict the standardized level difference and the apparent sound reduction index in bands of octaves were established by a regression analysis. Results for the proposed model are close to data measured “in situ”. On the other hand, thermal measures were done in an experimental module, as well as in another as for reference in three periods of the day. Green prototypes roofs were built in the experimental module and a traditional roof were built in the reference one. Results of both modules were compared as well as the interaction with outside temperature. Internal temperatures of the experimental module in dry condition tend to keep their values throughout the day; in the morning, its values are higher than those of the reference module and external temperatures. Finally, four models of sound-thermal correlation were done from measures “in situ”. The first three were related to temperature and sound pressure level in three moments of the day. In the afternoon, it is observed that when temperature increases, sound pressure levels increases too. In the fourth model, a sound and thermal correlation was established between thermal resistance of multilayer materials with their sound reduction index, and a moderated correlation coefficient was obtained. This research poses challenges from the environmental point of view, and it allows quantifying sound insulation of roofs as well as improving quality of life in urban areas; the use of local vegetation promotes respect for nature and it produces a smaller environmental impact as well.

Homo-motor, ciborgues e... aha! pessoas : da revolução industrial a revolução da informação

Universidade Estadual de Campinas . Faculdade de Educação Física

Saude coletiva e aptdão fisica de escolares de segundo grau : estudo a partis do Colegio Tecnico Industrial - UNESP, Bauru

Universidade Estadual de Campinas . Faculdade de Educação Física

Modelagem e gestão das perdas no suprimento de tomates para processamento industrial

O suprimento de tomates para processamento industrial é uma atividade relativamente complexa. Plantas industriais de larga escala necessitam de elevados volumes diários de matéria-prima. Por outro lado, há alta perecibilidade dos frutos e a colheita ainda é predominantemente manual. Um modelo matemático foi desenvolvido com o propósito de entender objetivamente o processo de suprimento de tomate e, também, vislumbrar possibilidades de sua otimização. A simulação a partir do modelo pode gerar cenários que, quando comparados com o desempenho efetivamente observado em campo, evidenciam a importância da gestão acurada, com a presença de potenciais ganhos financeiros expressivos na cadeia de suprimentos a partir da redução de tempos, perdas e custos. As perdas de produto poderiam ser reduzidas de mais de 2% para algo inferior a 1%. A menor capacidade ociosa traduzir-se-ia em um menor custo de oportunidade e aumento de receita. Para uma fábrica com um consumo de tomates de 336 mil toneladas por ano, a melhoria no suprimento de matéria-prima poderia resultar em ganhos estimados em R$ 6 milhões por ano.

Avaliação tecnológica de painéis MDF de madeira de Eucalyptus grandis confeccionados em laboratório e em linha de produção industrial

MDF panels of Eucalyptus grandis wood fibers were made in either experimentally in a laboratory or on an industrial production line. In order to analyze the influence of the production condition, the anatomical, physical and mechanical properties of the panels were determined. The wood refining induced the transversal rupture of the transversal fiber wall. The MDF panels obtained from the industrial production line presented less swelling in thickness and absorption values and improved mechanical properties in the requirements of bending strength, module of elasticity and surface resistance. For laboratory MDF panels, it was possible to verify a statistically significant correlation between bending strength and module of elasticity, medium density and internal bond and swelling in thickness and absorption. This tendency was also true for the MDF panels obtained in real conditions of production, however without statistical significance. By comparing the quality properties of MDF panels produced in the laboratory with those obtained in real conditions of production, it was sought to standardize the established variables for obtaining panels on a small scale, as well to make possible the safe transfer and divulgation of information obtained in the laboratory.

Status of chemical elements in Atlantic Forest tree species near an industrial complex

Environmental quality assessment studies have been conducted with tree species largely distributed in the Atlantic Forest. Leaf and soil samples were collected in the conservation unit Parque Estadual da Serra do Mar (PESM) nearby the industrial complex of Cubatao, Sao Paulo State, Brazil, and analyzed for chemical elements by instrumental neutron activation analysis. Results were compared to background values obtained in the Parque Estadual Carlos Botelho (PECB). The higher As, Fe, Hg and Zn mass fractions in the tree leaves of PESM indicated anthropogenic influence on this conservation unit.

Industrial apiculture in the Jordan valley during Biblical times with Anatolian honeybees

Although texts and wall paintings suggest that bees were kept in the Ancient Near East for the production of precious wax and honey, archaeological evidence for beekeeping has never been found. The Biblical term ""honey"" commonly was interpreted as the sweet product of fruits, such as dates and figs. The recent discovery of unfired clay cylinders similar to traditional hives still used in the Near East at the site of Tel Rehov in the Jordan valley in northern Israel suggests that a large-scale apiary was located inside the town, dating to the 10th-early 9th centuries B.C.E. This paper reports the discovery of remains of honeybee workers, drones, pupae, and larvae inside these hives. The exceptional preservation of these remains provides unequivocal identification of the clay cylinders as the most ancient beehives yet found. Morphometric analyses indicate that these bees differ from the local subspecies Apis mellifera syriaca and from all subspecies other than A. m. anatoliaca, which presently resides in parts of Turkey. This finding suggests either that the Western honeybee subspecies distribution has undergone rapid change during the last 3,000 years or that the ancient inhabitants of Tel Rehov imported bees superior to the local bees in terms of their milder temper and improved honey yield.

Regulating industrial forest concessions in Central Africa and South America

Tropical countries face special specific problems in implementing sustainable forest management (SFM). In many countries, questions are raised on whether tropical forests should be publicly, commonly or privately owned and managed in order to enhance sustainability. Other debates also focus on whether small-scale enterprises are better positioned than large-scale industrial concessions to reduce poverty and attain sustainable management. In countries where large tracts of forest are state-owned, concessions are viewed as a means of delivering services of public and collective interest through an association of private investment and public regulation. However, the success of an industrial concession model in countries with large forest resource endowment to achieve multiple goals such as sustainable forest management and local/regional development depends on two critical assumptions. First, forest functions and services should be managed and maintained as public goods. In many cases, additional uses - and corresponding rights - can take place alongside logging activities. Industrial concessions can be more efficient than other tenure models (such as community-based forest management and small-scale enterprises) in achieving SFM, add value to raw material and comply with growing environmental norms. This is especially the case in market-remote areas with low population density and poor infrastructure. Secondly, to achieve these different outcomes, any concession system needs to be monitored and regulated, especially in contexts dominated by asymmetrical information between regulating authorities and concessionaires. New institutional responses have recently been put forward in several countries, providing valuable materials to design a renewed policy mix which associates public and private incentives. This paper provides a survey of the experience of forest concessions in several Central African and South American countries. The concession system is examined in order to clarify the issues involved, the problems encountered, and what can be learned from the shared experience of these countries in the last decade. This paper argues that despite a sometimes patchy record, concessions can help promote SFM so long as they are packaged with a certain number of specific measures. (C) 2008 Elsevier B.V. All rights reserved.

An alternative application to the Portuguese agro-industrial residue: Wheat straw

The effects of alkaline treatments of the wheat straw with sodium hydroxide were investigated. The optimal condition for extraction of hemicelluloses was found to be with 0.50 mol/l sodium hydroxide at 55C for 2 h. This resulted in the release of 17.3% of hemicellulose (% dry starting material), corresponding to the dissolution of 49.3% of the original hemicellulose. The yields were determined by gravimetric analysis and expressed as a proportion of the starting material. Chemical composition and physico-chemical properties of the samples of hemicelluloses were elucidated by a combination of sugar analyses, Fourier transform infrared (FTIR), and thermal analysis. The results showed that the treatments were very effective on the extraction of hemicelluloses from wheat straw and that the extraction intensity (expressed in terms of alkali concentration) had a great influence on the yield and chemical features of the hemicelluloses. The FTIR analysis revealed typical signal pattern for the hemicellulosic fraction in the 1,200-1,000 cm(-1) region. Bands between 1,166 and 1,000 cm(-1) are typical of xylans.

Screening of Food Grade Lipases to be Used in Esterification and Interesterification Reactions of Industrial Interest

Seven food grade commercially available lipases were immobilized by covalent binding on polysiloxane-polyvinyl alcohol (POS-PVA) hybrid composite and screened to mediate reactions of industrial interest. The synthesis of butyl butyrate and the interesterification of tripalmitin with triolein were chosen as model reactions. The highest esterification activity (240.63 mu M/g min) was achieved by Candida rugosa lipase, while the highest interesterification yield (31%, in 72 h) was achieved by lipase from Rhizopus oryzae, with the production of about 15 mM of the triglycerides C(50) and C(52). This lipase also showed a good performance in butyl butyrate synthesis, with an esterification activity of 171.14 mu M/g min. The results demonstrated the feasibility of using lipases from C. rugosa for esterification and R. oryzae lipase for both esterification and interesterification reactions.

Industrial challenges in grinding

This keynote paper aims at analyzing relevant industrial demands for grinding research. The chosen focus is to understand what are the main research challenges in the extensive industrial use of the process. Since the automotive applications are the most important driving forces for grinding development, the paper starts with an analysis on the main trends in more efficient engines and the changes in their components that will affect the grinding performance. A view from 23 machine tool builders is also presented based on a survey made in interviews and during the EMO and IMTS machine tool shows. Case studies received by the STC G members were used to show how research centers and industries are collaborating. A view from the authors and the final conclusions show hot topics for future grinding research. (C) 2009 CIRP.

Treatment of industrial effluents of recalcitrant nature using ozone, hydrogen peroxide and ultraviolet radiation

Currently diverse industries have high pollution potential because their productive processes generate great volumes of refractory effluents. These effluents are problematic, mainly due to the presence of recalcitrant compounds that are detrimental in wastewater treatment plants using biological systems in their processes. In general, biological treatments do not remove refractory elements. Also, in most cases these compounds can inhibit the yield or are toxic for biota responsible to remove the polluting agents. The Advanced Oxidative Processes (AOPs) represent a technological alternative with a great potential for treatment of no biodegradable effluents. In this paper a review of the use of advanced oxidatives processes: Ozone (O(3)), peroxide of hydrogen (H(2)O(2)) and ultraviolet radiation (UV) is presented applied to the treatment of recalcitrant effluents.

Monitoring Services for Industrial Applications

Sao Paulo Research Foundation (FAPESP) in Brazil

Modeling extended Petri nets compatible with GHENeSys IEC61131 for industrial automation

Petri net (PN) modeling is one of the most used formal methods in the automation applications field, together with programmable logic controllers (PLCs). Therefore, the creation of a modeling methodology for PNs compatible with the IEC61131 standard is a necessity of automation specialists. Different works dealing with this subject have been carried out; they are presented in the first part of this paper [Frey (2000a, 2000b); Peng and Zhou (IEEE Trans Syst Man Cybern, Part C Appl Rev 34(4):523-531, 2004); Uzam and Jones (Int J Adv Manuf Technol 14(10):716-728, 1998)], but they do not present a completely compatible methodology with this standard. At the same time, they do not maintain the simplicity required for such applications, nor the use of all-graphical and all-mathematical ordinary Petri net (OPN) tools to facilitate model verification and validation. The proposal presented here completes these requirements. Educational applications at the USP and UEA (Brazil) and the UO (Cuba), as well as industrial applications in Brazil and Cuba, have already been carried out with good results.