997 resultados para Road surface pollutants


Relevância:

80.00% 80.00%

Publicador:

Resumo:

The key goals in winter maintenance operations are preserving the safety and mobility of the traveling public. To do this, it is in general necessary to try to increase the friction of the road surface above the typical friction levels found on a snow or ice covered roadway. Because of prior work on the performance of abrasives (discussed in greater detail in chapter 2) a key concern when using abrasives has become how to ensure the greatest increase in pavement friction when using abrasives for the longest period of time. There are a number of ways in which the usage of abrasives can be optimized, and these methods are discussed and compared in this report. In addition, results of an Iowa DOT test of zero-velocity spreaders are presented. Additionally in this study the results of field studies conducted in Johnson County Iowa on the road surface friction of pavements treated with abrasive applications using different modes of delivery are presented. The experiments were not able to determine any significant difference in material placement performance between a standard delivery system and a chute based delivery system. The report makes a number of recommendations based upon the reviews and the experiments.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The use of chemicals is a critical part of a pro-active winter maintenance program. However, ensuring that the correct chemicals are used is a challenge. On the one hand, budgets are limited, and thus price of chemicals is a major concern. On the other, performance of chemicals, especially at lower pavement temperatures, is not always assured. Two chemicals that are used extensively by the Iowa Department of Transportation (Iowa DOT) are sodium chloride (or salt) and calcium chloride. While calcium chloride can be effective at much lower temperatures than salt, it is also considerably more expensive. Costs for a gallon of salt brine are typically in the range of $0.05 to $0.10, whereas calcium chloride brine may cost in the range of $1.00 or more per gallon. These costs are of course subject to market forces and will thus change from year to year. The idea of mixing different winter maintenance chemicals is by no means new, and in general discussions it appears that many winter maintenance personnel have from time to time mixed up a jar of chemicals and done some work around the yard to see whether or not their new mix “works.” There are many stories about the mixture turning to “mayonnaise” (or, more colorfully, to “snot”) suggesting that mixing chemicals may give rise to some problems most likely due to precipitation. Further, the question of what constitutes a mixture “working” in this context is a topic of considerable discussion. In this study, mixtures of salt brine and calcium chloride brine were examined to determine their ice melting capability and their freezing point. Using the results from these tests, a linear interpolation model of the ice melting capability of mixtures of the two brines has been developed. Using a criterion based upon the ability of the mixture to melt a certain thickness of ice or snow (expressed as a thickness of melt-water equivalent), the model was extended to develop a material cost per lane mile for the full range of possible mixtures as a function of temperature. This allowed for a comparison of the performance of the various mixtures. From the point of view of melting capacity, mixing calcium chloride brine with salt brine appears to be effective only at very low temperatures (around 0° F and below). However, the approach described herein only considers the material costs, and does not consider application costs or other aspects of the mixture performance than melting capacity. While a unit quantity of calcium chloride is considerably more expensive than a unit quantity of sodium chloride, it also melts considerably more ice. In other words, to achieve the same result, much less calcium chloride brine is required than sodium chloride brine. This is important in considering application costs, because it means that a single application vehicle (for example, a brine dispensing trailer towed behind a snowplow) can cover many more lane miles with calcium chloride brine than with salt brine before needing to refill. Calculating exactly how much could be saved in application costs requires an optimization of routes used in the application of liquids in anti-icing, which is beyond the scope of the current study. However, this may be an area that agencies wish to pursue for future investigation. In discussion with winter maintenance personnel who use mixtures of sodium chloride and calcium chloride, it is evident that one reason for this is because the mixture is much more persistent (i.e. it stays longer on the road surface) than straight salt brine. Operationally this persistence is very valuable, but at present there are not any established methods to measure the persistence of a chemical on a pavement. In conclusion, the study presents a method that allows an agency to determine the material costs of using various mixtures of salt brine and calcium chloride brine. The method is based upon the requirement of melting a certain quantity of snow or ice at the ice-pavement interface, and on how much of a chemical or of a mixture of chemicals is required to do that.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The goal of this research project was to develop a method to measure the performance of a winter maintenance program with respect to the task of providing safety and mobility to the travelling public. Developing these measures required a number of steps, each of which was accomplished. First, the impact of winter weather on safety (crash rates) and mobility (average vehicle speeds were measured by a combination of literature reviews and analysis of Iowa Department of Transportation traffic and Road Weather Information System data. Second, because not all winter storms are the same in their effects on safety and mobility, a method had to be developed to determine how much the various factors that describe a winter storm actually change safety and mobility. As part of this effort a storm severity index was developed, which ranks each winter storm on a scale between 0 (a very benign storm) and 1 (the worst imaginable storm). Additionally a number of methods of modeling the relationships between weather, winter maintenance actions and road surface conditions were developed and tested. The end result of this study was a performance measure based on average vehicle speed. For a given class of road, a maximum expected average speed reduction has been identified. For a given storm, this maximum expected average speed reduction is modified by the storm severity index to give a target average speed reduction. Thus, if for a given road the maximum expected average speed reduction is 20 mph, and the storm severity for a particular storm is 0.6, then the target average speed reduction for that road in that storm is 0.6 x 20 mph or 12 mph. If the average speed on that road during and after the storm is only 12 mph or less than the average speed on that road in good weather conditions, then the winter maintenance performance goal has been met.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

With over 68 thousand miles of gravel roads in Iowa and the importance of these roads within the farm-to-market transportation system, proper water management becomes critical for maintaining the integrity of the roadway materials. However, the build-up of water within the aggregate subbase can lead to frost boils and ultimately potholes forming at the road surface. The aggregate subbase and subgrade soils under these gravel roads are produced with material opportunistically chosen from local sources near the site and, many times, the compositions of these sublayers are far from ideal in terms of proper water drainage with the full effects of this shortcut not being fully understood. The primary objective of this project was to provide a physically-based model for evaluating the drainability of potential subbase and subgrade materials for gravel roads in Iowa. The Richards equation provided the appropriate framework to study the transient unsaturated flow that usually occurs through the subbase and subgrade of a gravel road. From which, we identified that the saturated hydraulic conductivity, Ks, was a key parameter driving the time to drain of subgrade soils found in Iowa, thus being a good proxy variable for accessing roadway drainability. Using Ks, derived from soil texture, we were able to identify potential problem areas in terms of roadway drainage . It was found that there is a threshold for Ks of 15 cm/day that determines if the roadway will drain efficiently, based on the requirement that the time to drain, Td, the surface roadway layer does not exceed a 2-hr limit. Two of the three highest abundant textures (loam and silty clay loam), which cover nearly 60% of the state of Iowa, were found to have average Td values greater than the 2-hr limit. With such a large percentage of the state at risk for the formation of boils due to the soil with relatively low saturated hydraulic conductivity values, it seems pertinent that we propose alternative design and/or maintenance practices to limit the expensive repair work in Iowa. The addition of drain tiles or French mattresses my help address drainage problems. However, before pursuing this recommendation, a comprehensive cost-benefit analysis is needed.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

We consider second kind integral equations of the form x(s) - (abbreviated x - K x = y ), in which Ω is some unbounded subset of Rn. Let Xp denote the weighted space of functions x continuous on Ω and satisfying x (s) = O(|s|-p ),s → ∞We show that if the kernel k(s,t) decays like |s — t|-q as |s — t| → ∞ for some sufficiently large q (and some other mild conditions on k are satisfied), then K ∈ B(XP) (the set of bounded linear operators on Xp), for 0 ≤ p ≤ q. If also (I - K)-1 ∈ B(X0) then (I - K)-1 ∈ B(XP) for 0 < p < q, and (I- K)-1∈ B(Xq) if further conditions on k hold. Thus, if k(s, t) = O(|s — t|-q). |s — t| → ∞, and y(s)=O(|s|-p), s → ∞, the asymptotic behaviour of the solution x may be estimated as x (s) = O(|s|-r), |s| → ∞, r := min(p, q). The case when k(s,t) = к(s — t), so that the equation is of Wiener-Hopf type, receives especial attention. Conditions, in terms of the symbol of I — K, for I — K to be invertible or Fredholm on Xp are established for certain cases (Ω a half-space or cone). A boundary integral equation, which models three-dimensional acoustic propaga-tion above flat ground, absorbing apart from an infinite rigid strip, illustrates the practical application and sharpness of the above results. This integral equation mod-els, in particular, road traffic noise propagation along an infinite road surface sur-rounded by absorbing ground. We prove that the sound propagating along the rigid road surface eventually decays with distance at the same rate as sound propagating above the absorbing ground.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Full-waveform laser scanning data acquired with a Riegl LMS-Q560 instrument were used to classify an orange orchard into orange trees, grass and ground using waveform parameters alone. Gaussian decomposition was performed on this data capture from the National Airborne Field Experiment in November 2006 using a custom peak-detection procedure and a trust-region-reflective algorithm for fitting Gauss functions. Calibration was carried out using waveforms returned from a road surface, and the backscattering coefficient c was derived for every waveform peak. The processed data were then analysed according to the number of returns detected within each waveform and classified into three classes based on pulse width and c. For single-peak waveforms the scatterplot of c versus pulse width was used to distinguish between ground, grass and orange trees. In the case of multiple returns, the relationship between first (or first plus middle) and last return c values was used to separate ground from other targets. Refinement of this classification, and further sub-classification into grass and orange trees was performed using the c versus pulse width scatterplots of last returns. In all cases the separation was carried out using a decision tree with empirical relationships between the waveform parameters. Ground points were successfully separated from orange tree points. The most difficult class to separate and verify was grass, but those points in general corresponded well with the grass areas identified in the aerial photography. The overall accuracy reached 91%, using photography and relative elevation as ground truth. The overall accuracy for two classes, orange tree and combined class of grass and ground, yielded 95%. Finally, the backscattering coefficient c of single-peak waveforms was also used to derive reflectance values of the three classes. The reflectance of the orange tree class (0.31) and ground class (0.60) are consistent with published values at the wavelength of the Riegl scanner (1550 nm). The grass class reflectance (0.46) falls in between the other two classes as might be expected, as this class has a mixture of the contributions of both vegetation and ground reflectance properties.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The forest roads construction inevitably causes environmental impacts to adjacent ecosystems and streams. Also the routine activities of roads maintenance may similarly cause environmental impacts of about the same magnitude. The material scraped from the roadway by the motor grader is usually distributed along the roadsides, from where it may easily be washed out toward the streams. Therefore, quantifying the amount of sediments removed during road maintenance activities may provide important information of this stream sedimentation potential. For this purpose, three forest roads were divided in 30 m long segments, marked with leveled stakes. A nylon thread was then stretched across the leveled stakes and the distance from the nylon thread to the road surface was measured before and after the mechanical scraping of the road. The average removal of sediments was of 2,13 cm. Considering the mean density of soil 1,6 g cm -3, the average removal of sediments was of 341 t ha -1 of road. Considering still a 3,9 m wide and 150 m long road as an example, the total amount of removed sediments would be around 19,9 t. Road maintenance, therefore, must be well planned in order to avoid or minimize stream sedimentation.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The lack of proper planning in intervention works of runoff water on rural properties and rural public roads leads to economic damage and loss of environmental quality. The impact of the action without technical base is soil erosion, siltation of water sources, loss of the quality and availability of water, invalidating areas for cultivation and livestock. The conservation of headwaters requires beyond regeneration of the environmental characteristics the repair and management of the degraded watercourse in order to control erosion. This graduate work in Environmental Engineering from Universidade Estadual Paulista Julio de Mesquita Filho - UNESP Presidente Prudente proposes a headwater recuperation and management in rural area of Álvares Machado municipality, São Paulo State, through the method of deep drainage applied to the case of a rural road near the outcrop of water. This technique consists in the installation of draining structures in sub-areas of the road surface, or sub-gutter and/or in the platform border in order to conduct the underground flow of water and reduce the loss of sediment in water flow. Therefore, was performed a historic study of use and occupation of land in the municipality of Álvares Machado, portraying transformations of the landscape caused by human action. Geology, geomorphology, pedology and hydrogeology data were collected from the study area in order to establish the conditions that led into the current situation of degradation and formulate an effective intervention strategy for civil works

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Monitorar a condição de uso de toda a extensão das rodovias brasileiras é tarefa dispendiosa e demorada. Este trabalho trata de novas técnicas que permitem o levantamento da condição da superfície dos pavimentos rodoviários de forma ágil utilizando imagens hiperespectrais de sensor digital aeroembarcado. Nos últimos anos, um número crescente de imagens de alta resolução espacial tem surgido no mercado mundial com o aparecimento dos novos satélites e sensores aeroembarcados de sensoriamento remoto. Propõe-se uma metodologia para identificação dos pavimentos asfálticos e classificação das principais ocorrências dos defeitos na superfície do pavimento. A primeira etapa da metodologia é a identificação da superfície asfáltica na imagem, utilizando uma classificação híbrida baseada inicialmente em pixel e depois refinada por objetos. A segunda etapa da metodologia é a identificação e classificação das ocorrências dos principais defeitos nos pavimentos flexíveis que são observáveis nas imagens de alta resolução espacial. Esta última etapa faz uso intensivo das novas técnicas de classificação de imagens baseadas em objetos. O resultado final é a geração de índices da condição da superfície do pavimento a partir das imagens que possam ser comparados com os indicadores vigentes da condição da superfície do pavimento já normatizados pelos órgãos competentes no país.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

In the past a change in temperature of 5°C most often occurred over intervals of thousands of years. According to estimates by the IPCC, in the XXI century is expected an increase in average temperatures in Europe between 1.8 and 4.0°C in the best case caused by emissions of carbon dioxide and other GHG from human activities. As well as on the environment and economic context, global warming will have effects even on road safety. Several studies have already shown how increasing temperature may cause a worsening of some types of road surface damages, especially rutting, a permanent deformation of the road structures consisting in the formation of a longitudinal depression in the wheelpath, mostly due to the rheological behavior of bitumen. This deformation evolves during the hot season because of the heating capacity of the asphalt layers, in fact, the road surface temperature is up to 24°C higher than air. In this thesis, through the use of Wheeltrack test, it was studied the behavior of some types of asphalt concrete mixtures subjected to fatigue testing at different temperatures. The objectives of this study are: to determine the strain variation of different bituminous mixture subjected to fatigue testing at different temperature conditions; to investigate the effect of aggregates, bitumen and mixtures’ characteristics on rutting. Samples were made in the laboratory mostly using an already prepared mixtures, the others preparing the asphalt concrete from the grading curve and bitumen content. The same procedure was performed for each specimen: preparation, compaction using the roller compactor, cooling and heating before the test. The tests were carried out at 40 - 50 - 60°C in order to obtain the evolution of deformation with temperature variation, except some mixtures for which the tests were carried out only at 50°C. In the elaboration of the results were considered testing parameters, component properties and the characteristics of the mixture. Among the testing parameters, temperature was varied for each sample. The mixtures responded to this variation with a different behavior (linear logarithmic and exponential) not directly correlated with the asphalt characteristics; the others parameters as load, passage frequency and test condition were kept constant. According to the results obtained, the main contribution to deformation is due to the type of binder used, it was found that the modified bitumen have a better response than the same mixtures containing traditional bitumen; to the porosity which affects negatively the behavior of the samples and to the homogeneity ceteris paribus. The granulometric composition did not seem to have interfered with the results. Overall has emerged at working temperature, a decisive importance of bitumen composition, than the other characteristics of the mixture, that tends to disappear with heating in favor of increased dependence of rutting resistance from the granulometric composition of the sample considered. In particular it is essential, rather than the mechanical characteristics of the binder, its chemical properties given by the polymeric modification. To confirm some considered results, the maximum bulk density and the air voids content were determined. Tests have been conducted in the laboratories of the Civil Engineering Department at NTNU in Trondheim according to European Standards.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

La presente investigación parte del problema en las zonas de clima cálido - húmedo en las cuales se producen impactos asociados a la incomodidad térmica producto de la intensa radiación solar, altas temperaturas y elevada humedad. Estos factores reducen la calidad de los espacios abiertos y desarrollan en la población una actitud de rechazo hacia el uso del microespacio urbano entre edificaciones en los desarrollos urbanos - conjuntos urbanos - , los mismos frecuentemente admiten soluciones que al parecer no contribuyen a la realización de las actividades comunes de esparcimiento de la población residente. Por lo tanto, el objetivo de la investigación es profundizar en la temática urbano - ambiental - social y el diseño urbano vinculada a la particularidad morfológica local, las condiciones microclimáticas, el uso del microespacio y los requerimientos de los usuarios. La finalidad de desarrollar estrategias de control microclimático del microespacio entre edificios en clima cálido - húmedo en búsqueda de soluciones óptimas que satisfagan las necesidades de los usuarios de los espacios exteriores en estas áreas residenciales. La investigación se centra en el estudio de las particularidades contextuales relacionadas con el microclima y las características urbanas - morfotipológicas, básicamente los factores microclimáticos (soleamiento y ventilación), los morfológicos y edificatorios y las características de las superficies (pavimentos). En coherencia con el objetivo propuesto el trabajo se desarrolla en cuatro fases: la primera aborda la revisión documental, literatura relevante e investigaciones relativas a la calidad ambiental, medio social, medio físico, el microespacio urbano, control y diseño sostenible, modelización proyectual y estrategias sostenibles; la segunda fase se refiere al marco contextual, características urbanas, datos climáticos locales, planes y procesos urbanos, tipologías y conformación urbana. En esta fase se describe el proceso de selección, análisis y evaluación urbano - ambiental de los casos de estudio (conjuntos residenciales). En la tercera fase se aborda el marco evaluativo y estudio de casos, consideraciones físicas, climáticas y valoración térmico - ambiental de los conjuntos residenciales seleccionados. En esta fase se aplican Técnicas Estadísticas y de Simulación Computacional y se analizan los resultados obtenidos. Finalmente, la cuarta fase propositiva incluye el establecimiento de Estrategias, Principios y Lineamientos de optimación térmica y se exponen las Conclusiones parciales de la tesis, alcances y perspectivas futuras. Finalmente, los resultados obtenidos en la investigación demuestran que el análisis en las experiencias de la realidad permiten comprobar que las situaciones y alteraciones ambientales sustanciales, los niveles de afectación térmica y las condiciones de confortabilidad e impacto derivan de las características urbanas, los componentes del microespacio y de las condiciones climáticas las cuales afectan el desarrollo de las actividades y el uso efectivo del microespacio entre edificios. El análisis de los factores morfo - climáticos incidentes y el estudio de los efectos de interacción contribuyen al establecimiento de Principios y Lineamientos para la evaluación y diseño sostenible del microespacio entre edificios y el uso correcto de los elementos del clima en estas áreas urbanas destinadas a la actividad social y al esparcimiento de la población residente. ABSTRACT This research starts from the problem of hot - humid climate zones where impacts related to thermal discomfort are produced as a result from the intense solar radiation and high temperatures and humidity. These factors reduce the quality of open spaces and people develop an attitude of rejection towards the use of urban microspace among buildings within urban developments - urban complexes - . Usually, these complexes admit solutions that apparently do not contribute to the achievement of common leisure activities in the resident dwellers. Therefore, the main purpose of this research is to deepen in the urban - environmental - social issue and urban design linked to the local morphological particularity, microclimate conditions, use of microspace and users’ requirements. In order to develop microclimate control strategies of microspace among buildings in hot - humid climate to look for optimal solutions that satisfy users’ needs of outdoors spaces in these residential areas. The research focuses in the study of contextual particularities related to microclimate and urban - morphotypological characteristics. Basically, microclimate (sunlight and ventilation), morphological and building factors as well as road surface characteristics. According to the proposed objective, this research is developed in four phases: the first one considers documentary review, relevant literature and researches related to environmental quality, social environment, physical environment, urban microspace, control and sustainable design, project modelling and sustainable strategies; while the second phase refers to contextual framework, urban characteristics, local climate data, plans and urban processes, typologies and urban structure. In this phase, the process of selection, analysis and urban - environmental evaluation of case studies (residential complexes) is described. The third phase approaches the assessment framework and case studies, physical and climate considerations as well as environmental - thermal evaluation of selected residential complexes. In this phase, statistical techniques and computational simulations are applied. Likewise, results obtained are analysed. Similarly, fourth and proposing phase includes the establishment of strategies, principles and guidelines of thermal optimization and partial conclusions of the thesis, scopes and future perspectives are exposed. Finally, from the results obtained, it is demonstrated that the analysis on reality experiences allow proving that situations and substantial environmental changes, levels of thermal affectations, comfort conditions and impact derive from urban characteristics, microspace components and from climate conditions which affect the development of activities and the effective use of microspace among buildings. The analysis of incidental morpho - climate factors and the study of interaction effects contribute to the establishment of principles and guidelines for the assessment and sustainable design of microspace among buildings as well as the correct use of climate elements in these urban areas oriented to social and leisure activities of resident population.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

No tenemos conocimiento de ninguna red de caminos prerromanos que sirvieran como base de una posible malla territorial de España. Sin embargo, una sociedad prerromana sin caminos, por muy fragmentada y aislada que fuera, es algo improbable y mucho menos en la Edad del Hierro. Por eso en época prerromana existían infinidad de caminos, muchos de los cuales hoy han desaparecido y otros han sobrevivido, casi siempre con sus recorridos mejorados. Los pueblos prerromanos aprovecharon vías naturales de comunicación (ríos, vados, valles, puertos naturales, llanuras, etc.) para tender sus caminos. En sus orígenes no siguieron pautas concretas, si no que los caminos se originaban por el tránsito (de personas, ganados, mercancías, etc.) de un lugar a otro. De este modo la red viaria prerromana era caótica y anárquica: todo camino tenía numerosos ramales y variantes, según las necesidades. Pendientes excesivas, anchuras variables, etc., en decir eran vías espontáneas, surgidas sin ninguna planificación aparente. Los recorridos en general eran cortos, aunque algunas investigaciones actuales están demostrando que algunas de las cañadas ganaderas más importantes, como la Galiana, y de largo recorrido, eran de origen prerromano. En el caso de la península Ibérica, y más concretamente en el caso de la Meseta, el territorio estaba fragmentado en diversos pueblos y tribus, agrupados según criterios étnicos y culturales y con contactos con los pueblos próximos que motivan la preponderancia de caminos de recorrido cortos. Solo la necesidad de llevar los rebaños (de cabras y ovejas sobre todo) desde las serranías en verano a las llanuras en invierno, motivaría viajes más largos en los que algunas cañadas ganaderas jugarían un papel más importante. Con la llegada de los romanaos, se implantó en Hispania una densa red viaria, cuya construcción se prolongó durante toda la dominación romana, siendo reparadas muchas calzadas y vías en varias ocasiones. En época romana la red caminera era variada y estaba constituida por “las calzadas” que comunicaban puntos importantes, eran muy transitadas, de ahí que la administración romana las mantuviera siempre en buen estado, para asegurar el intercambio comercial entre zonas distintas, cobro de impuestos, etc. “Los caminos de tierra (viae terrenae)” que además de las calzadas, que podemos asemejar a las actuales carreteras de primer y segundo orden, constituían la infinidad de caminos locales y comarcales. Los trazados se realizaron unos en época romana, y otros muchos apoyándose en los caminos de la época prerromana, éstas vías no se realizaban buscando el recorrido más corto entre dos puntos, ni tampoco el más cómodo y con un firme estructural de menor importancia que en las calzadas. Tampoco estaban hechos para un tipo concreto de transporte, por lo que nos encontraríamos algunos que por su anchura permitían el paso de carros, y otros que sólo permitirían el paso a pie, a caballo o en burro. Solían ser, como hemos indicado, caminos de tierra con acabados en zahorras y recorridos en su mayor parte cortos y medianos. Dentro de la malla territorial de España las calzadas constituirían las denominadas “viae publicae” que constituían la red principal y esqueleto vertebrador de Hispania. Los caminos de tierra constituirían los denominados “actus” caminos de carácter regional que configuraban la mayor parte de la red. Muchas de las “viae publicae” y de los “actus” tendrían su origen en las “viae militares” que habrían sido los primeros construidos, apoyándose en muchas ocasiones en los caminos prerromanos, por los romanos para realizar la conquista de Hispania y que luego con la Paz romana habrían tenido otro tipo de uso. Dentro de estas “viae militares” tuvieron una importancia relevancia aquellas que se utilizaron en la conquista de la Celtiberia, culminada con la caída de Numantia. Dentro de ellas tuvo una importancia fundamental la vía romana del río Alhama, objeto de esta Tesis, que facilitaría el desplazamiento de los ejércitos romanos desde Graccurris, primera ciudad romana fundada en el Ebro medio, hasta Numantia. Desde la época Augusta, la vía romana del río Alhama, pasaría a formar parte de los denominados “actus” formando parte de la malla territorial de la Península Ibérica como vía de comunicación entre la Meseta y el Ebro Medio. We do not have knowledge of any network of ways prerromanos that were serving as base of a possible territorial mesh of Spain. Nevertheless, a company prerromana without ways, for very fragmented and isolated that was, is something improbable and great less in the Age of the Iron. Because of it in epoch prerromana existed infinity of ways, many of which today have disappeared and others have survived, almost always with his improved tours. The people prerromanos took advantage of natural routes of communication (rivers, fords, valleys, natural ports, plains, etc.) to stretch his ways. In his origins concrete guidelines did not continue, if not that the ways were originating for the traffic (of persons, cattle, goods, etc.) to and from. Thus the network viaria prerromana was chaotic and anarchic: all way had numerous branches and variants, according to the needs. Excessive slopes, variable widths, etc., in saying were spontaneous routes arisen without no apparent planning. The tours in general were short, though some current investigations are demonstrating that some of the most important cattle glens, as the Galiana, and of crossed length, were of origin prerromano. In case of the Iberian Peninsula, and more concretely in case of the Plateau, the territory was fragmented in diverse peoples and tribes, grouped according to ethnic and cultural criteria and with contacts with the near peoples that motivate the prevalence of short ways of tour. Only the need to take the flocks (of goats and sheeps especially) from the mountainous countries in summer to the plains in winter, would motivate longer trips in which some cattle glens would play a more important paper. With the arrival of the romanos, a dense network was implanted in Roman Spain viaria, whose construction extended during the whole Roman domination, being repaired many causeways and routes in several occasions. In Roman epoch the pertaining to roads network was changed and constituted by " the causeways " that were communicating important points, they were very travelled, of there that the Roman administration was supporting always in good condition, to assure the commercial exchange between different zones, collection of taxes, etc. "The dirt tracks (viae terrenae)" that besides the causeways, which we can make alike to the current roads of the first and second order, were constituting the infinity of local and regional ways. The tracings were realized some in Roman epoch, and great others resting on the ways of the epoch prerromana, these routes were not realized looking for the most short tour neither between points, two nor neither most comfortable and with a structural road surface of minor importance that in the causeways. They were not also done for a concrete type of transport, for what some of us would think that for his width they were allowing the step of cars, and others that only would allow the step afoot, astride or in donkey. They were in the habit of being, since we have indicated, dirt tracks with ended in zahorras and tours in his most short and medium. Inside the territorial mesh of Spain the causeways would constitute the called ones "viae publicae" that constituted the principal network and skeleton vertebrador of Roman Spain. The dirt tracks would constitute the "actus” called ways of regional character that were forming most of the network. Many of "viae publicae" and of the "actus" they would have his origin in " viae military" that would have been the first ones constructed, resting on many occasions on the ways prerromanos, for the Romans to realize the conquest of Roman Spain and that then with the Roman Peace they would have had another type of use. Inside these "viae military" had an importance relevancy those that were in use in the conquest of the Celtiberia, reached with Numantia's fall. Inside them a fundamental importance had the Roman route of the river Alhama, object of this Thesis, which would facilitate the displacement of the Roman armies from Graccurris, the first Roman city been founded on the average Ebro, up to Numantia. From the August epoch, the Roman route of the river Alhama, would happen to form a part of the "actus” forming a part of the territorial mesh of the Iberian Peninsula as road link between the Plateau and the Average Ebro.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Federal Highway Administration, Office of Research and Development, Washington, D.C.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Federal Highway Administration, Office of Engineering and Highway Operations Research and Development, McLean, Va.