Forme e modelli di diafonia nella musica tradizionale italiana

La tesi di Dottorato espone i risultati dell’analisi condotta su alcune tipologie di canto profano a due parti, osservate nella tradizione orale di specifiche aree rurali: le espressioni diafoniche oggetto di indagine sono state individuate in diverse regioni, prevalentemente nell’Italia centro-meridionale e in Sicilia, con alcune propaggini nell’Italia nord-orientale e in alcune aree europee abitate da minoranze italiane (Istria slovena e croata). I documenti analizzati sono stati reperiti grazie alla ricerca sul campo e rintracciati anche nelle pubblicazioni discografiche, nei cataloghi dei più importanti archivi pubblici e privati italiani. Sono stati definiti i caratteri formali dei repertori e l’indagine realizzata ha inoltre condotto a una mappatura attestante la presenza di repertori vocali simili in diverse sub-aree della Penisola, confermando la estesa diffusione di pratiche diafoniche tradizionali in Italia. Sulla base di analogie e ricorrenze è stato rilevato che le espressioni diafoniche italiane possono essere attribuite a una remota tradizione comune: sebbene le peculiarità relative a ciascun repertorio siano in molti casi abbastanza marcate, le connotazioni strutturali e i modi performativi che distinguono tali repertori pare vogliano indicare di essere di fronte a testimonianze di una tradizione musicale arcaica, in cui è possibile individuare procedure e attitudini diafoniche simili e condivise. L’ultima parte dell’indagine espone alcune riflessioni emerse dal confronto tra le forme diafoniche analizzate e repertori polifonici conservati nella tradizione scritta, prendendo come punto di partenza gli studi di Nino Pirrotta: ne emergono considerazioni per l’individuazione e l’analisi di possibili comuni occorrenze all’interno di pratiche performative localmente convergenti, pur se subordinate a modi di trasmissione diversi (tradizione scritta e non scritta della musica).

Fenomeni di diffusione delle notizie in siti di microblogging: modelli di analisi e studio di caso.

L'informazione è alla base della conoscenza umana. Senza, non si potrebbe sapere nulla di ciò che esiste, di ciò che è stato o di quello che potrebbe accadere. Ogni giorno si assimilano moltissime informazioni, che vengono registrate nella propria memoria per essere riutilizzate all'occorrenza. Ne esistono di vari generi, ma il loro insieme va a formare quella che è la cultura, educazione, tradizione e storia dell'individuo. Per questo motivo è importante la loro diffusione e salvaguardia, impedendone la perdita che costerebbe la dipartita di una parte di sé, del proprio passato o del proprio futuro. Al giorno d'oggi le informazioni possono essere acquisite tramite persone, libri, riviste, giornali, la televisione, il Web. I canali di trasmissione sono molti, alcuni più efficaci di altri. Tra questi, internet è diventato un potente strumento di comunicazione, il quale consente l'interazione tra chi naviga nel Web (ossia gli utenti) e una partecipazione attiva alla diffusione di informazioni. Nello specifico, esistono siti (chiamati di microblogging) in cui sono gli stessi utenti a decidere se un'informazione possa essere o meno inserita nella propria pagina personale. In questo caso, si è di fronte a una nuova "gestione dell'informazione", che può variare da utente a utente e può defluire in catene di propagazione (percorsi che compiono i dati e le notizie tra i navigatori del Web) dai risvolti spesso incerti. Ma esiste un modello che possa spiegare l'avanzata delle informazioni tra gli utenti? Se fosse possibile capirne la dinamica, si potrebbe venire a conoscenza di quali sono le informazioni più soggette a propagazione, gli utenti che più ne influenzano i percorsi, quante persone ne vengono a conoscenza o il tempo per cui resta attiva un'informazione, descrivendone una sorta di ciclo di vita. E' possibile nel mondo reale trovare delle caratteristiche ricorrenti in queste propagazioni, in modo da poter sviluppare un metodo universale per acquisirne e analizzarne le dinamiche? I siti di microblogging non seguono regole precise, perciò si va incontro a un insieme apparentemente casuale di informazioni che necessitano una chiave di lettura. Quest'ultima è proprio quella che si è cercata, con la speranza di poter sfruttare i risultati ottenuti nell'ipotesi di una futura gestione dell'informazione più consapevole. L'obiettivo della tesi è quello di identificare un modello che mostri con chiarezza quali sono i passaggi da affrontare nella ricerca di una logica di fondo nella gestione delle informazioni in rete.

Impiego della spettrometria di massa nell'analisi di fumonisine in alimenti e matrici di origine animale

Mycotoxins are heterogeneous chemical compounds characterized by a low molecular weight and synthesized by the secondary metabolism of different molds. Fumonisins are water-soluble mycotoxins produced by Fusarium species spoiling corn and derived produc ts. These mycotoxins can be a health hazard when consuming contaminated cereals, but they can reach humans also indirectly through the consumption of food products derived from animals fed with contaminated feed. Fumonisins have been associated with several animal and human diseases: they are suspected risk factors for esophageal and liver cancers, neural tube defects and cardiovascular problems. Improved methods are needed to accurately assess fumonisins concentrations in food of vegetable and animal origin, in order to prevent acute and chronic human exposure. The aim of the present work was to evaluate the versatility and the performances of mass spectrometry, coupled with liquid chromatography, in fumonisins analysis from foods and matrices of animal origin. Different methods for the identification and quantification of fumonisins and related products have been developed and validated to determine fumonisin B1 in milk, fumonisin B1, fumonisin B2 and their complete hydrolyzed products (HFB1 and HFB2) in pig liver and fumonisins B1 and B2 in complete and complementary dry dog food. The experimental procedures have been carefully studied, considering matrices features, number and type of molecules to detect. Therefore, several extraction, clean up and separation techniques were tested in order to obtain the better conditions of sample processing. The fit for purpose sample preparation, matched with high mass spectrometry sensibility and specificity, have allowed to achieve good results in any tested animal matrices. Hence, the developed methods were validated and have shown a high accuracy, sensibility and precision, fulfilling performance requirements of Decision 2002/657/EC and of European Project Standard, Measuring and Testing (SMT). In any developed method, the analytes were identified and quantified even at very low concentrations : the limits of quantification resulted lower than other similar works, performed with different detectors. These methods were applied to some commercial samples and to some samples collected for research projects in the Department of Veterinary Public Health and Animal Pathology (DVPHAP) of University of Bologna. Although the disclosed data must be considered completely preliminary and without statistical significance, they emphasize the presence of mycotoxins in animal products. The outcomes obtained from the processed samples (bovine milk, pig liver and dry dog food) suggest the efficacy of these methods also on other food matrices, confirming the versatility and the performances of mass spectrometry, coupled with liquid chromatography, in fumonisins analysis. Moreover the results underline the need to set up a large scale monitoring in order to evaluate the presence of fumonisins in food of animal origin for human consumption.

Modellazione multibody di veicoli ferroviari: sviluppo ed implementazione di modelli innovativi per l'analisi del contatto ruota - rotaia

The wheel - rail contact analysis plays a fundamental role in the multibody modeling of railway vehicles. A good contact model must provide an accurate description of the global contact phenomena (contact forces and torques, number and position of the contact points) and of the local contact phenomena (position and shape of the contact patch, stresses and displacements). The model has also to assure high numerical efficiency (in order to be implemented directly online within multibody models) and a good compatibility with commercial multibody software (Simpack Rail, Adams Rail). The wheel - rail contact problem has been discussed by several authors and many models can be found in the literature. The contact models can be subdivided into two different categories: the global models and the local (or differential) models. Currently, as regards the global models, the main approaches to the problem are the so - called rigid contact formulation and the semi – elastic contact description. The rigid approach considers the wheel and the rail as rigid bodies. The contact is imposed by means of constraint equations and the contact points are detected during the dynamic simulation by solving the nonlinear algebraic differential equations associated to the constrained multibody system. Indentation between the bodies is not permitted and the normal contact forces are calculated through the Lagrange multipliers. Finally the Hertz’s and the Kalker’s theories allow to evaluate the shape of the contact patch and the tangential forces respectively. Also the semi - elastic approach considers the wheel and the rail as rigid bodies. However in this case no kinematic constraints are imposed and the indentation between the bodies is permitted. The contact points are detected by means of approximated procedures (based on look - up tables and simplifying hypotheses on the problem geometry). The normal contact forces are calculated as a function of the indentation while, as in the rigid approach, the Hertz’s and the Kalker’s theories allow to evaluate the shape of the contact patch and the tangential forces. Both the described multibody approaches are computationally very efficient but their generality and accuracy turn out to be often insufficient because the physical hypotheses behind these theories are too restrictive and, in many circumstances, unverified. In order to obtain a complete description of the contact phenomena, local (or differential) contact models are needed. In other words wheel and rail have to be considered elastic bodies governed by the Navier’s equations and the contact has to be described by suitable analytical contact conditions. The contact between elastic bodies has been widely studied in literature both in the general case and in the rolling case. Many procedures based on variational inequalities, FEM techniques and convex optimization have been developed. This kind of approach assures high generality and accuracy but still needs very large computational costs and memory consumption. Due to the high computational load and memory consumption, referring to the current state of the art, the integration between multibody and differential modeling is almost absent in literature especially in the railway field. However this integration is very important because only the differential modeling allows an accurate analysis of the contact problem (in terms of contact forces and torques, position and shape of the contact patch, stresses and displacements) while the multibody modeling is the standard in the study of the railway dynamics. In this thesis some innovative wheel – rail contact models developed during the Ph. D. activity will be described. Concerning the global models, two new models belonging to the semi – elastic approach will be presented; the models satisfy the following specifics: 1) the models have to be 3D and to consider all the six relative degrees of freedom between wheel and rail 2) the models have to consider generic railway tracks and generic wheel and rail profiles 3) the models have to assure a general and accurate handling of the multiple contact without simplifying hypotheses on the problem geometry; in particular the models have to evaluate the number and the position of the contact points and, for each point, the contact forces and torques 4) the models have to be implementable directly online within the multibody models without look - up tables 5) the models have to assure computation times comparable with those of commercial multibody software (Simpack Rail, Adams Rail) and compatible with RT and HIL applications 6) the models have to be compatible with commercial multibody software (Simpack Rail, Adams Rail). The most innovative aspect of the new global contact models regards the detection of the contact points. In particular both the models aim to reduce the algebraic problem dimension by means of suitable analytical techniques. This kind of reduction allows to obtain an high numerical efficiency that makes possible the online implementation of the new procedure and the achievement of performance comparable with those of commercial multibody software. At the same time the analytical approach assures high accuracy and generality. Concerning the local (or differential) contact models, one new model satisfying the following specifics will be presented: 1) the model has to be 3D and to consider all the six relative degrees of freedom between wheel and rail 2) the model has to consider generic railway tracks and generic wheel and rail profiles 3) the model has to assure a general and accurate handling of the multiple contact without simplifying hypotheses on the problem geometry; in particular the model has to able to calculate both the global contact variables (contact forces and torques) and the local contact variables (position and shape of the contact patch, stresses and displacements) 4) the model has to be implementable directly online within the multibody models 5) the model has to assure high numerical efficiency and a reduced memory consumption in order to achieve a good integration between multibody and differential modeling (the base for the local contact models) 6) the model has to be compatible with commercial multibody software (Simpack Rail, Adams Rail). In this case the most innovative aspects of the new local contact model regard the contact modeling (by means of suitable analytical conditions) and the implementation of the numerical algorithms needed to solve the discrete problem arising from the discretization of the original continuum problem. Moreover, during the development of the local model, the achievement of a good compromise between accuracy and efficiency turned out to be very important to obtain a good integration between multibody and differential modeling. At this point the contact models has been inserted within a 3D multibody model of a railway vehicle to obtain a complete model of the wagon. The railway vehicle chosen as benchmark is the Manchester Wagon the physical and geometrical characteristics of which are easily available in the literature. The model of the whole railway vehicle (multibody model and contact model) has been implemented in the Matlab/Simulink environment. The multibody model has been implemented in SimMechanics, a Matlab toolbox specifically designed for multibody dynamics, while, as regards the contact models, the CS – functions have been used; this particular Matlab architecture allows to efficiently connect the Matlab/Simulink and the C/C++ environment. The 3D multibody model of the same vehicle (this time equipped with a standard contact model based on the semi - elastic approach) has been then implemented also in Simpack Rail, a commercial multibody software for railway vehicles widely tested and validated. Finally numerical simulations of the vehicle dynamics have been carried out on many different railway tracks with the aim of evaluating the performances of the whole model. The comparison between the results obtained by the Matlab/ Simulink model and those obtained by the Simpack Rail model has allowed an accurate and reliable validation of the new contact models. In conclusion to this brief introduction to my Ph. D. thesis, we would like to thank Trenitalia and the Regione Toscana for the support provided during all the Ph. D. activity. Moreover we would also like to thank the INTEC GmbH, the society the develops the software Simpack Rail, with which we are currently working together to develop innovative toolboxes specifically designed for the wheel rail contact analysis.

Modelli di Ottimizzazione per la programmazione di sale operatorie

La tesi è l'esito di un lavoro di studio e ricerca nell'ambito della gestione delle sale operatorie, uno dei problemi principali su cui si sono focalizzati gli studi di Ricerca Operativa, applicati ai sistemi sanitari, sviluppati nell'ultimo decennio. Vengono presentati i due modelli di ottimizzazione creati al fine di migliorare l'efficienza organizzativa delle pianificazioni degli interventi chirurgici di un presidio ospedaliero. I due modelli, uno teorico e l'altro implementato con istanze reali, si distinguono dalle ricerche presenti in letteratura per l'innovativa proposta di pianificare attività preoperatorie che contribuiscano a raggiungere una miglior efficienza e la diminuzione dei costi delle pratiche chirurgiche.