Le redoublement, la réussite scolaire et l’objectif de la Scolarisation Primaire Universelle (SPU) d’ici à 2015 dans le cadre de l’Éducation Pour Tous (EPT) : cas du Sénégal à partir des données longitudinales du PASEC

L’Éducation Pour Tous mobilise la communauté internationale et les gouvernements depuis 1990. Cet engagement global renouvelé en 2000 sous l’auspice de l’UNESCO puis des Nations-Unies, porte notamment sur un objectif de base : l’universalisation de la scolarisation primaire complète pour tous les enfants d’âge scolaire à l’horizon de 2015. Plusieurs études sur la réalisation de cet objectif montrent que les pays en développement sont les plus à risque et que les progrès accomplis dans la plupart de ces pays, pourraient être plus importants si la pratique du redoublement faisait davantage l’objet de régulation et de contrôle. Cela contribuerait à améliorer la réussite scolaire et accroître la rétention des élèves au sein des systèmes éducatifs. La pratique du redoublement est en effet une tradition dans plusieurs systèmes éducatifs. Elle est particulièrement prépondérante dans certains groupes de pays ou régions, notamment en Afrique francophone au sud du Sahara. Dans ces pays, le PASEC - Programme d’Analyse des Systèmes Éducatifs de la CONFEMEN (Conférence des Ministres de l’Éducation Nationale des pays ayant le français en partage) - œuvre à améliorer l’accès à une éducation de qualité pour tous, par exemple, en informant les politiques sur la situation nationale du redoublement. Cette recherche sur le redoublement, la réussite scolaire et l’objectif de la Scolarisation Primaire Universelle (SPU) privilégie la dimension pédagogique, l’analyse empirique et étudie le cas du Sénégal. Elle présente et discute les indicateurs internationaux de suivi de l’objectif de la SPU, fait le point de l’état des connaissances sur le redoublement et la réussite scolaire et montre le défi que représente la réalisation de l’objectif de la SPU notamment dans les pays francophones d’Afrique sub-Saharienne. Exploitant les données existantes de l’enquête longitudinale de suivi de cohorte du PASEC au Sénégal entre 1995 et 2000, cette recherche examine le parcours scolaire des élèves en vue de la réalisation de l’objectif de la SPU. L’examen effectué combine des approches d’analyse transversale et longitudinale du redoublement et des apprentissages par rapport aux caractéristiques personnelles, familiales et scolaires de l’élève. Les résultats d’analyse montrent des variabilités, notamment par rapport aux caractéristiques personnelles de l’élève et à celles de sa classe et de son milieu de scolarisation. L’analyse longitudinale du redoublement s’est appuyée sur le diagramme de flux scolaire et a permis de produire un ensemble d’indicateurs d’efficacité interne du système éducatif du Sénégal. Pour la cohorte étudiée, du fait de l’importance des redoublements et des abandons scolaires, il faut en moyenne 9,4 années de scolarité pour que l’élève progresse du deuxième au sixième (dernier) grade du primaire. Seulement 39% de l’effectif de la cohorte survivent au dernier grade ce qui suggère que si cette tendance se maintenait, le Sénégal serait à risque de ne pas réaliser l’objectif de la SPU. Une évaluation de la situation courante à partir de données plus récentes serait requise. Le diagramme de flux scolaire constitue un outil de planification de l’éducation et représente de ce fait un important levier aux mains des autorités politiques pour agir sur les paramètres du système éducatif (paramètres liés à la qualité de l’éducation, à l’efficacité interne, etc.) afin de répondre à des objectifs spécifiques ou d’étapes pouvant conduire, par exemple, à la réalisation de l’objectif de la SPU.

The supernova remnant CTB 37B and its associated magnetar CXOU J171405.7-381031: evidence for a magnetar-driven remnant

We discuss the association between the candidate magnetar CXOU J171405.7-381031 and the supernova remnant CTB 37B. The recent detection of the period derivative of the object allowed an estimation of a young characteristic age of only similar to 1000 yr. This value is too small to be compatible even with the minimum radius of the remnant being >= 10 pc, the value corresponding to the lower limit of the estimated distance of 10.2 +/- 3.5 kpc, unless the true distance happens to be even smaller than the lower limit. We argue that a consistent scenario for the remnant`s origin, in which the latter is powered by the energy injected by a young magnetar, is indeed more accurate to explain the young age, and demonstrates its non-standard (i.e. magnetar-driven) nature.

Filtragem digital e reconstrução de sinais em frequência intermediária usando FPGA

O presente trabalho trata da filtragem e reconstrução de sinais em frequência intermediária usando FPGA. É feito o desenvolvimento de algoritmos usando processamento digital de sinais e também a implementação dos mesmos, constando desde o projeto da placa de circuito impresso, montagem e teste. O texto apresenta um breve estudo de amostragem e reconstrução de sinais em geral. Especial atenção é dada à amostragem de sinais banda-passante e à análise de questões práticas de reconstrução de sinais em frequência intermediária. Dois sistemas de reconstrução de sinais baseados em processamento digital de sinais, mais especificamente reamostragem no domínio discreto, são apresentados e analisados. São também descritas teorias de processos de montagem e soldagem de placas eletrônicas com objetivo de definir uma metodologia de projeto, montagem e soldagem de placas eletrônicas. Tal metodologia é aplicada no projeto e manufatura do protótipo de um módulo de filtragem digital para repetidores de telefonia celular. O projeto, implementado usando FPGA, é baseado nos dois sistemas supracitados. Ao final do texto, resultados obtidos em experimentos de filtragem digital e reconstrução de sinais em frequência intermediária com o protótipo desenvolvido são apresentados.

Expansão da capacidade de transmissão de sistemas ópticos através da tecnologia WDM: um estudo de caso sobre o sistema da Eletronorte

Esta dissertação de mestrado apresenta dois projetos, sendo um referente ao sistema Tramo Oeste, e o outro ao sistema Pará – Maranhão; relacionado ao trecho Marabá – Santa Maria, com bombeamento remoto e amplificação Raman. A dissertação trata da expansão da capacidade de transmissão do sistema óptico da Eletronorte, no Tramo Oeste. Atualmente, esse sistema opera à taxa STM1 (155 Mb/s). Também é usada uma nova tecnologia para eliminação de estações repetidoras, através do bombeamento remoto. Essa técnica se fundamenta no uso de amplificadores ópticos bombeados remotamente, por meio das fibras ópticas do cabo OPGW (Optical Ground Wire) já instaladas no sistema.Esses amplificadores ópticos são constituídos somente por componentes passivos; e, além disso, podem ser acomodados em caixas de emendas ópticas; as quais são fixadas nas torres das linhas de transmissão do sistema, ao longo do enlace; sendo que as fontes ópticas para a realização do bombeamento remoto são localizadas e alimentadas nas próprias subestações terminais. A simulação dos sistemas é através de um software comercial de simulação Optisystem 4.1™. Esta dissertação propõe mudanças nos sistemas ópticos para aumentar a capacidade de transmissão por WDM; bombeamento remoto para estações sem repetição, e uso de amplificação Raman. Aborda-se ainda, a concepção de um backbone óptico DWDM, que é um convênio de cooperação técnica entre a Eletronorte e o Governo do Estado do Pará; e os resultados das simulações desse backbone óptico. É feita uma análise crítica comparativa deste, com os projetos dos sistemas ópticos do Tramo Oeste e do sistema Pará – Maranhão; referente ao trecho Marabá – Santa Maria.

Effects of high-energy astrophysical events on habitable planets

With the possible exception of meteor impacts, high-energy astrophysical events such as supernovae, gamma-ray bursts (GRB) and flares are usually not taken into account for biological and evolutionary studies due to their low rates of occurrence. We show that a class of these events may occur at distances and time scales in which their biological effects are non-negligible, maybe more frequent than the impacts of large asteroids. We review the effects of four transient astrophysical sources of ionizing radiation on biospheres - stellar flares, giant flares from soft gamma repeaters (SGR), supernovae and GRB. The main damaging features of them are briefly discussed and illustrated. We point out some open problems and ongoing work. Received 28 February 2012, accepted 6 July 2012, first published online 10 August 2012

Design and Performance Evaluation of Network-on-Chip Communication Protocols and Architectures

The scale down of transistor technology allows microelectronics manufacturers such as Intel and IBM to build always more sophisticated systems on a single microchip. The classical interconnection solutions based on shared buses or direct connections between the modules of the chip are becoming obsolete as they struggle to sustain the increasing tight bandwidth and latency constraints that these systems demand. The most promising solution for the future chip interconnects are the Networks on Chip (NoC). NoCs are network composed by routers and channels used to inter- connect the different components installed on the single microchip. Examples of advanced processors based on NoC interconnects are the IBM Cell processor, composed by eight CPUs that is installed on the Sony Playstation III and the Intel Teraflops pro ject composed by 80 independent (simple) microprocessors. On chip integration is becoming popular not only in the Chip Multi Processor (CMP) research area but also in the wider and more heterogeneous world of Systems on Chip (SoC). SoC comprehend all the electronic devices that surround us such as cell-phones, smart-phones, house embedded systems, automotive systems, set-top boxes etc... SoC manufacturers such as ST Microelectronics , Samsung, Philips and also Universities such as Bologna University, M.I.T., Berkeley and more are all proposing proprietary frameworks based on NoC interconnects. These frameworks help engineers in the switch of design methodology and speed up the development of new NoC-based systems on chip. In this Thesis we propose an introduction of CMP and SoC interconnection networks. Then focusing on SoC systems we propose: • a detailed analysis based on simulation of the Spidergon NoC, a ST Microelectronics solution for SoC interconnects. The Spidergon NoC differs from many classical solutions inherited from the parallel computing world. Here we propose a detailed analysis of this NoC topology and routing algorithms. Furthermore we propose aEqualized a new routing algorithm designed to optimize the use of the resources of the network while also increasing its performance; • a methodology flow based on modified publicly available tools that combined can be used to design, model and analyze any kind of System on Chip; • a detailed analysis of a ST Microelectronics-proprietary transport-level protocol that the author of this Thesis helped developing; • a simulation-based comprehensive comparison of different network interface designs proposed by the author and the researchers at AST lab, in order to integrate shared-memory and message-passing based components on a single System on Chip; • a powerful and flexible solution to address the time closure exception issue in the design of synchronous Networks on Chip. Our solution is based on relay stations repeaters and allows to reduce the power and area demands of NoC interconnects while also reducing its buffer needs; • a solution to simplify the design of the NoC by also increasing their performance and reducing their power and area consumption. We propose to replace complex and slow virtual channel-based routers with multiple and flexible small Multi Plane ones. This solution allows us to reduce the area and power dissipation of any NoC while also increasing its performance especially when the resources are reduced. This Thesis has been written in collaboration with the Advanced System Technology laboratory in Grenoble France, and the Computer Science Department at Columbia University in the city of New York.

Magnetars

Recent x-ray observations have shown that a substantial fraction of newly born neutron stars have magnetic fields of several 1014 G. They reveal themselves as soft gamma repeaters and anomalous x-ray pulsars and may account for the missing radio pulsars in young supernova remnants.

Is SGR 0418+5729 indeed a waning magnetar?

SGR 0418+5729 is a transient soft gamma-ray repeater which underwent a major outburst in 2009 June, during which the emission of short bursts was observed. Its properties appeared quite typical of other sources of the same class until long-term X-ray monitoring failed to detect any period derivative. The present upper limit on P implies that the surface dipole field is Bp lsim 7.5 × 1012 G, well below those measured in other soft gamma-ray repeaters (SGRs) and in the Anomalous X-ray Pulsars (AXPs), a group of similar sources. Both SGRs and AXPs are currently believed to be powered by ultra-magnetized neutron stars (magnetars, Bp ≈ 1014-1015 G). SGR 0418+5729 hardly seems to fit in such a picture. We show that the magneto-rotational properties of SGR 0418+5729 can be reproduced if this is an aged magnetar, ≈1 Myr old, which experienced substantial field decay. The large initial toroidal component of the internal field required to match the observed properties of SGR 0418+5729 ensures that crustal fractures, and hence bursting activity, can still occur at the present time. The thermal spectrum observed during the outburst decay is compatible with the predictions of a resonant Compton scattering model (as in other SGRs/AXPs) if the field is low and the magnetospheric twist is moderate.

Telephone repeater AN/TCC-8 and telephone repeater AN/TCC-21, organizational maintenance.

"March 1958."

Monitoring long distance WDM communication lines using a high-loss loopback supervisory system

In this paper, we present experimental results for monitoring long distance WDM communication links using a line monitoring system suitable for legacy optically amplified long-haul undersea systems. This monitoring system is based on setting up a simple, passive, low cost high-loss optical loopback circuit at each repeater that provides a connection between the existing anti-directional undersea fibres, and can be used to define fault location. Fault location is achieved by transmitting a short pulse supervisory signal along with the WDM data signals where a portion of the overall signal is attenuated and returned to the transmit terminal by the loopback circuit. A special receiver is used at the terminal to extract the weakly returned supervisory signal where each supervisory signal is received at different times corresponding to different optical repeaters. Therefore, the degradation in any repeater appears on its corresponding supervisory signal level. We use a recirculating loop to simulate a 4600 km fibre link, on which a high-loss loopback supervisory system is implemented. Successful monitoring is accomplished through the production of an appropriate supervisory signal at the terminal that is detected and identified in a satisfactory time period after passing through up to 45 dB attenuation in the loopback circuit. © 2012 Elsevier B.V. All rights reserved.

Ultra-long haul optical fibre transmission systems

This thesis examines experimentally options for optical fibre transmission over oceanic distances. Its format follows the chronological evolution of ultra-long haul optical systems, commencing with opto-electronic regenerators as repeaters, progressing to optically amplified NRZ systems and finally solitonic propagation. In each case recirculating loop techniques are deployed to simplify the transmission experiments. Advances in high speed electronics have allowed regenerators operating at 10 Gbit/s to become a practical reality. By augmenting such devices with optical amplifiers it is possible to greatly enhance the repeater spacing. Work detailed in this thesis has culminated in the propagation of 10 Gbit/s data over 400,000 km with a repeater spacing of 160 km. System reliability and robustness are enhanced by the use of a directly modulated DFB laser transmitter and total insensitivity of the system to the signal state of polarisation. Optically amplified ultra-long haul NRZ systems have taken on particular importance with the impending deployment of TAT 12/13 and TPC 5. The performance of these systems is demonstrated to be primarily limited by analogue impairments such as the accumulation of amplifier noise, polarisation effects and optical non-linearities. These degradations may be reduced by the use of appropriate dispersion maps and by scrambling the transmitted state of signal polarisation. A novel high speed optically passive polarisation scrambler is detailed for the first time. At bit rates in excess of 10 Gbit/s it is shown that these systems are severely limited and do not offer the advantages that might be expected over regenerated links. Propagation using solitons as the data bits appears particularly attractive since the dispersive and non-linear effects of the fibre allow distortion free transmission. However, the generation of pure solitons is difficult but must be achieved if the uncontrolled transmission distance is to be maximised. This thesis presents a new technique for the stabilisation of an erbium fibre ring laser that has aUowed propagation of 2.5 Gbit/s solitons to the theoretical limit of ~ 18,000 km. At higher bit rates temporal jitter becomes a significant impairment and to aUow an increase in the aggregate line rate multiplexing in both time and polarisation domains has been proposed. These techniques are shown to be of only limited benefit in practical systems and ultimately some form of soliton transmission control is required. The thesis demonstrates synchronous retiming by amplitude modulation that has allowed 20 Gbit/s data to propagate 125,000 km error free with an amplifier spacing approaching the soliton period. Ultimately the speed of operation of such systems is limited by the electronics used and, thus, a new form of soliton control is demonstrated using all optical techniques to achieve synchronous phase modulation.

Monitoring long distance WDM communication lines using a high-loss loopback supervisory system

In this paper, we present experimental results for monitoring long distance WDM communication links using a line monitoring system suitable for legacy optically amplified long-haul undersea systems. This monitoring system is based on setting up a simple, passive, low cost high-loss optical loopback circuit at each repeater that provides a connection between the existing anti-directional undersea fibres, and can be used to define fault location. Fault location is achieved by transmitting a short pulse supervisory signal along with the WDM data signals where a portion of the overall signal is attenuated and returned to the transmit terminal by the loopback circuit. A special receiver is used at the terminal to extract the weakly returned supervisory signal where each supervisory signal is received at different times corresponding to different optical repeaters. Therefore, the degradation in any repeater appears on its corresponding supervisory signal level. We use a recirculating loop to simulate a 4600 km fibre link, on which a high-loss loopback supervisory system is implemented. Successful monitoring is accomplished through the production of an appropriate supervisory signal at the terminal that is detected and identified in a satisfactory time period after passing through up to 45 dB attenuation in the loopback circuit. © 2012 Elsevier B.V. All rights reserved.

Monitoring long distance WDM communication lines using a high-loss loopback supervisory system

In this paper, we present experimental results for monitoring long distance WDM communication links using a line monitoring system suitable for legacy optically amplified long-haul undersea systems. This monitoring system is based on setting up a simple, passive, low cost high-loss optical loopback circuit at each repeater that provides a connection between the existing anti-directional undersea fibres, and can be used to define fault location. Fault location is achieved by transmitting a short pulse supervisory signal along with the WDM data signals where a portion of the overall signal is attenuated and returned to the transmit terminal by the loopback circuit. A special receiver is used at the terminal to extract the weakly returned supervisory signal where each supervisory signal is received at different times corresponding to different optical repeaters. Therefore, the degradation in any repeater appears on its corresponding supervisory signal level. We use a recirculating loop to simulate a 4600 km fibre link, on which a high-loss loopback supervisory system is implemented. Successful monitoring is accomplished through the production of an appropriate supervisory signal at the terminal that is detected and identified in a satisfactory time period after passing through up to 45 dB attenuation in the loopback circuit. © 2012 Elsevier B.V. All rights reserved.

Signal processing using opto-electronic devices

All-optical signal processing is a powerful tool for the processing of communication signals and optical network applications have been routinely considered since the inception of optical communication. There are many successful optical devices deployed in today’s communication networks, including optical amplification, dispersion compensation, optical cross connects and reconfigurable add drop multiplexers. However, despite record breaking performance, all-optical signal processing devices have struggled to find a viable market niche. This has been mainly due to competition from electro-optic alternatives, either from detailed performance analysis or more usually due to the limited market opportunity for a mid-link device. For example a wavelength converter would compete with a reconfigured transponder which has an additional market as an actual transponder enabling significantly more economical development. Never-the-less, the potential performance of all-optical devices is enticing. Motivated by their prospects of eventual deployment, in this chapter we analyse the performance and energy consumption of digital coherent transponders, linear coherent repeaters and modulator based pulse shaping/frequency conversion, setting a benchmark for the proposed all-optical implementations.

Quality of the written information about suicide attempters

INTRODUCTION: The aim of the study was to assess the quality of the clinical records of the patients who are seen in public hospitals in Madrid after a suicide attempt in a blind observation. METHODS: Observational, descriptive cross-sectional study conducted at four general public hospitals in Madrid (Spain). Analyses of the presence of seven indicators of information quality (previous psychiatric treatment, recent suicidal ideation, recent suicide planning behaviour, medical lethality of suicide attempt, previous suicide attempts, attitude towards the attempt, and social or family support) in 993 clinical records of 907 patients (64.5% women), ages ranging from 6 to 92 years (mean 37.1±15), admitted to hospital after a suicide attempt or who committed an attempt whilst in hospital. RESULTS: Of patients who attempted suicide, 94.9% received a psychosocial assessment. All seven indicators were documented in 22.5% of the records, whilst 23.6% recorded four or less than four indicators. Previous suicide attempts and medical lethality of current attempt were the indicators most often missed in the records. The study found no difference between the records of men and women (z=0.296; p=0.767, two tailed Mann-Whitney U test), although clinical records of patients discharged after an emergency unit intervention were more incomplete than the ones from hospitalised patients (z=2.731; p=0.006), and clinical records of repeaters were also more incomplete than the ones from non-repeaters (z=3.511; p<0.001). CONCLUSIONS: Clinical records of patients who have attempted suicide are not complete. The use of semi-structured screening instruments may improve the evaluation of patients who have self- harmed.