Sulfonated poly(ether ether ketone)/clay-SO3H hybrid proton exchange membranes for direct methanol fuel cells Journal of Power Sources

A new type of sulfonated clay (clay-SO3H) was prepared by the ion exchange method with the sulfanilic acid as the surfactant agent. The grafted amount of sulfanilic acid in clay-SO3H was 51.8 mequiv. (100 g)(-1), which was measured by thermogravimetric analysis (TGA). Sulfonated poly(ether ether ketone) (SPEEK)/clay-SO3H hybrid membranes which composed of SPEEK and different weight contents of clay-SO3H, were prepared by a solution casting and evaporation method. For comparison, the SPEEK/clay hybrid membranes were produced with the same method.

Implications of the North Atlantic Oscillation for a UK–Norway renewable power system

UK wind-power capacity is increasing and new transmission links are proposed with Norway, where hydropower dominates the electricity mix. Weather affects both these renewable resources and the demand for electricity. The dominant large-scale pattern of Euro-Atlantic atmospheric variability is the North Atlantic Oscillation (NAO), associated with positive correlations in wind, temperature and precipitation over northern Europe. The NAO's effect on wind-power and demand in the UK and Norway is examined, focussing on March when Norwegian hydropower reserves are low and the combined power system might be most susceptible to atmospheric variations. The NCEP/NCAR meteorological reanalysis dataset (1948–2010) is used to drive simple models for demand and wind-power, and ‘demand-net-wind’ (DNW) is estimated for positive, neutral and negative NAO states. Cold, calm conditions in NAO− cause increased demand and decreased wind-power compared to other NAO states. Under a 2020 wind-power capacity scenario, the increase in DNW in NAO− relative to NAO neutral is equivalent to nearly 25% of the present-day average rate of March Norwegian hydropower usage. As the NAO varies on long timescales (months to decades), and there is potentially some skill in monthly predictions, we argue that it is important to understand its impact on European power systems.

Renewable energy sources in Latin America and the Caribbean: two years after the Bonn Conference

Includes bibliography

Multifunctional current reference generation strategy for grid-tied power electronic converter

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nuclear-energy power sources : presented at the fourteenth annual Power Sources Conference, May 17-19, 1960, Atlantic City, New Jersey /

Work done in the Power Sources Division, U.S. Army Signal Research and Development Laboratory, Fort Monmouth, New Jersey.

System operational costs reduction with non-conventional reactive power sources

Wind energy installations are increasing in power systems worldwide and wind generation capacity tends to be located some distance from load centers. A conflict may arise at times of high wind generation when it becomes necessary to curtail wind energy in order to maintain conventional generators on-line for the provision of voltage control support at load centers. Using the island of Ireland as a case study and presenting commercially available reactive power support devices as possible solutions to the voltage control problems in urban areas, this paper explores the reduction in total generation costs resulting from the relaxation of the operational constraints requiring conventional generators to be kept on-line near load centers for reactive power support. The paper shows that by 2020 there will be possible savings of 87€m per annum and a reduction in wind curtailment of more than a percentage point if measures are taken to relax these constraints.

Coal-fired Power Plants with Flexible Amine-based CCS and Co-located Wind Power: Environmental, Economic and Reliability Outcomes

Carbon Capture and Storage (CCS) technologies provide a means to significantly reduce carbon emissions from the existing fleet of fossil-fired plants, and hence can facilitate a gradual transition from conventional to more sustainable sources of electric power. This is especially relevant for coal plants that have a CO2 emission rate that is roughly two times higher than that of natural gas plants. Of the different kinds of CCS technology available, post-combustion amine based CCS is the best developed and hence more suitable for retrofitting an existing coal plant. The high costs from operating CCS could be reduced by enabling flexible operation through amine storage or allowing partial capture of CO2 during high electricity prices. This flexibility is also found to improve the power plant’s ramp capability, enabling it to offset the intermittency of renewable power sources. This thesis proposes a solution to problems associated with two promising technologies for decarbonizing the electric power system: the high costs of the energy penalty of CCS, and the intermittency and non-dispatchability of wind power. It explores the economic and technical feasibility of a hybrid system consisting of a coal plant retrofitted with a post-combustion-amine based CCS system equipped with the option to perform partial capture or amine storage, and a co-located wind farm. A techno-economic assessment of the performance of the hybrid system is carried out both from the perspective of the stakeholders (utility owners, investors, etc.) as well as that of the power system operator.

In order to perform the assessment from the perspective of the facility owners (e.g., electric power utilities, independent power producers), an optimal design and operating strategy of the hybrid system is determined for both the amine storage and partial capture configurations. A linear optimization model is developed to determine the optimal component sizes for the hybrid system and capture rates while meeting constraints on annual average emission targets of CO2, and variability of the combined power output. Results indicate that there are economic benefits of flexible operation relative to conventional CCS, and demonstrate that the hybrid system could operate as an energy storage system: providing an effective pathway for wind power integration as well as a mechanism to mute the variability of intermittent wind power.

In order to assess the performance of the hybrid system from the perspective of the system operator, a modified Unit Commitment/ Economic Dispatch model is built to consider and represent the techno-economic aspects of operation of the hybrid system within a power grid. The hybrid system is found to be effective in helping the power system meet an average CO2 emissions limit equivalent to the CO2 emission rate of a state-of-the-art natural gas plant, and to reduce power system operation costs and number of instances and magnitude of energy and reserve scarcity.

Average Modelling of a Voltage Source Inverter with Dead-Time in a Synchronous Reference Frame

Voltage source inverters are an integral part of renewable power sources and smart grid systems. Computationally efficient and fairly accurate models for the voltage source inverter are required to carry out extensive simulation studies on complex power networks. Accuracy requires that the effect of dead-time be incorporated in the inverter model. The dead-time is essentially a short delay introduced between the gating pulses to the complementary switches in an inverter leg for the safety of power devices. As the modern voltage source inverters switch at fairly high frequencies, the dead-time significantly influences the output fundamental voltage. Dead-time also causes low-frequency harmonic distortion and is hence important from a power quality perspective. This paper studies the dead-time effect in a synchronous dq reference frame, since dynamic studies and controller design are typically carried out in this frame of reference. For the sake of computational efficiency, average models are derived, incorporating the dead-time effect, in both RYB and dq reference frames. The average models are shown to consume less computation time than their corresponding switching models, the accuracies of the models being comparable. The proposed average synchronous reference frame model, including effect of dead-time, is validated through experimental results.

Tecnologias CAC e Inquéritos de Percepção da Opinião Pública sobre “O papel da Captação e do Armazenamento/Sequestração de Dióxido de Carbono no Futuro da Energia na Europa”:O caso-de-estudo da Comunidade Fernando Pessoa

O carvão e outros combustíveis fósseis, continuarão a ser, por décadas, a principal matéria-prima energética para as Centrais Térmicas, não obstante os esforços para, dentro do possível, substituir os combustíveis fósseis por fontes de energia renovável.Tal como está, hoje, bem documentado, a produção de gases com efeito estufa (GEE), designadamente CO2, resulta da combustão dos ditos combustíveis fósseis, sendo que se espera ser possível mitigar substancialmente a emissão de tais gases com a aplicação das chamadas Tecnologias Limpas do Carvão.Há, pois, necessidade de promover o abatimento do CO2 através de Tecnologias de Emissão Zero ou Tecnologias Livres de Carbono, incluindo designadamente a Captura, o Transporte e a Sequestração geológica de CO2 correspondentes ao que é costume designar por Tecnologias CAC (Captação e Armazenamento de Carbono). De facto, tais tecnologias e, designadamente, o armazenamento geológico de CO2 são as únicas que, no estado actual do conhecimento, são capazes de permitir que se cumpram as metas do ambicioso programa da EU para a energia e o ambiente conhecido por “20 20 para 2020” em conjugação com os aspectos económicos das directivas relativas ao Comércio Europeu de Licenças de Emissão – CELE (Directivas 2003/87/EC, 2004/101/EC e 2009/29/EC).A importância do tema está, aliás, bem demonstrada com o facto da Comissão Europeia ter formalmente admitido que as metas supracitadas serão impossíveis de atingir sem Sequestração Geológica de CO2. Esta é, pois, uma das razões de ter sido recentemente publicada a Directiva Europeia 2009/31/EC de 23 de Abril de 2009 expressamente dedicada ao tema do Armazenamento Geológico de CO2.Ora, a questão do armazenamento geológico de CO2 implica, para além das Tecnologias CAC acima mencionadas e da sua viabilização em termos tanto técnicos como económicos, ou seja, neste último aspecto, competitiva com o sistema CELE, também o conhecimento, da percepção pública sobre o assunto. Isto é, a praticabilidade das Tecnologias CAC implica que se conheça a opinião pública sobre o tema e, naturalmente, que face a esta realidade se prestem os esclarecimentos necessários como, aliás, é reconhecido na própria Directiva Europeia 2009/31/EC.Dado que a Fundação Fernando Pessoa / Universidade Fernando Pessoa através do seu Centro de Investigação em Alterações Globais, Energia, Ambiente e Bioengenharia – CIAGEB tem ultimado um Projecto de Engenharia relativo à Sequestração Geológica de CO2 nos Carvões (Metantracites) da Bacia Carbonífera do Douro – o Projecto COSEQ, preocupou-se naturalmente, desde o início, com o lançamento de inquéritos de percepção da opinião pública sobre o assunto.Tal implicou, nesta fase, a tradução para português e o lançamento do inquérito europeu ACCSEPT que não tinha sido ainda formalmente lançado de forma generalizada entre nós. Antes, porém, de lançar publicamente tal inquérito – o que está actualmente já em curso – resolveu-se testar o método de lançamento, a recolha de dados e o seu tratamento com uma amostra correspondente ao que se designou por Comunidade Fernando Pessoa, i.e. o conjunto de docentes, discentes, funcionários e outras pessoas relacionadas com a Universidade Fernando Pessoa (cerca de 5000 individualidades).Este trabalho diz, precisamente, respeito à preparação, lançamento e análise dos resultados do dito inquérito Europeu ACCSEPT a nível da Comunidade Fernando Pessoa. Foram recebidas 525 respostas representando 10,5% da amostra. A análise de resultados foi sistematicamente comparada com os obtidos nos outros países europeus, através do projecto ACCSEPT e, bem assim, com os resultados obtidos num inquérito homólogo lançado no Brasil. The use of coal, and other fossil fuels, will remain for decades as the main source of energy for power generation, despite the important efforts made to replace, as far as possible, fossil fuels with renewable power sources.As is well documented, the production of Greenhouse Gases (GHG), mainly CO2, arises primarily from the combustion of fossil fuels. The increasing application of Clean Coal Technologies-CCTs, is expected to mitigate substantially against the emission of such gases.There is consequently a need to promote the CO2 abatement through Zero Emission (Carbon Free) Technologies - ZETs, which includes CO2 capture, transport and geological storage, i.e. the so-called CCS (Carbon, Capture and Storage) technologies. In fact, these technologies are the only ones that are presently able to conform to the ambitious EU targets set out under the “20 20 by 2020” EU energy and environment programme, jointly with the economic aspects of the EU Directives 2003/87/EC, 2004/101/EC and 2009/29/EC concerned with the Greenhouse Gas Emissions Allowance Trading Scheme – ETS scheme. The European Commission formal admission that the referred targets will be impossible to reach without the implementation and contribution of geological storage clearly demonstrate the importance of this particular issue, and for this reason the EC Directive 2009/31/EC of April 23, 2009 on Geological Storage of CO2 was recently published.In considering the technical and economical viabilities of CCS technologies, the latter in competition with the ETS scheme, it is believed that public perception will dictate the success of the development and implementation of CO2 geological storage at a large industrial level. This means that, in order to successfully implement CCS technologies, not only must public opinion be taken into consideration but objective information must also be provided to the public in order to raise subject awareness, as recognized in the referred Directive 2009/31/EC.In this context, the Fernando Pessoa Foundation / University Fernando Pessoa, through its CIAGEB (Global Change, Energy, Environment and Bioengineering) RDID&D Unit, is the sponsor of an Engineering Project for the Geological Sequestration of CO2 in Douro Coalfield Meta-anthracites - the COSEQ Project, and is therefore also engaged in public perception surveys with regards to CCS technologies.At this stage, the original European ACCSEPT inquiry was translated to Portuguese and submitted only to the “Fernando Pessoa Community” - comprising university lecturers, students, other employees, as well as, former students and persons that have a professional or academic relationship with the university (c. 5000 individuals). The results obtained from this first inquiry will be used to improve the survey informatics system in terms of communication, database, and data treatment prior to resubmission of the inquiry to the Portuguese public at large.The present publication summarizes the process and the results obtained from the ACCSEPT survey distributed to the “Fernando Pessoa Community”. 525 replies, representing 10.5% of the sample, have been received and analysed. The assessment of the results was systematically compared with those obtained from other European Countries, as reported by the ACCSEPT inquiry, as well as with those from an identical inquiry launched in Brazil.

Control energy consumption and system performance in vector control of voltage source converters

Power electronics plays an important role in the control and conversion of modern electric power systems. In particular, to integrate various renewable energies using DC transmissions and to provide more flexible power control in AC systems, significant efforts have been made in the modulation and control of power electronics devices. Pulse width modulation (PWM) is a well developed technology in the conversion between AC and DC power sources, especially for the purpose of harmonics reduction and energy optimization. As a fundamental decoupled control method, vector control with PI controllers has been widely used in power systems. However, significant power loss occurs during the operation of these devices, and the loss is often dissipated in the form of heat, leading to significant maintenance effort. Though much work has been done to improve the power electronics design, little has focused so far on the investigation of the controller design to reduce the controller energy consumption (leading to power loss in power electronics) while maintaining acceptable system performance. This paper aims to bridge the gap and investigates their correlations. It is shown a more thoughtful controller design can achieve better balance between energy consumption in power electronics control and system performance, which potentially leads to significant energy saving for integration of renewable power sources.

Opacidade da fumaça do trator agrícola funcionando com biodiesel etílico destilado de babaçu e diesel B S10 em períodos do dia

Pós-graduação em Agronomia (Ciência do Solo) - FCAV