Utilização de materiais anti-vibráteis e de isolamento acústico na via férrea

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Vias de Comunicação e Transportes

Technological thinking in primary-aged children

When children are involved in design and technology activities, they are able to create solutions to problems, often in new and innovative ways. There have been few studies which have investigated how children work when undertaking technological activities and even fewer which have focused on children's thinking or knowledge while they have been involved in the production of a technological artifact. This paper reports on a research project involving 3 school, 4 classes and 80 children. The project focused on children's language, thinking and creativity while they designed and constructed a recycling device using recycled materials. Using children's written responses to key questions, we can highlight some of their thinking, knowledge and problem-solving strategies. It was clear from the children's responses that aspects of investigation, design, producation and evaluation were evident across all three sites. Findings on children's creativity and language were presented at previous Technology Education Research Conferences (TERC). 

Bunker-de-bunk 2012

Uma avaliação técnico/econômica da reciclagem de revestimentos asfálticos a frio em usina em área urbana

Trata-se nesta dissertação do emprego da reciclagem a frio de revestimentos asfálticos em usina com a finalidade de aproveitamento como camada de revestimento em vias de tráfego leve e muito leve. São revistos os conceitos de dimensionamento de pavimentos e da dosagem de misturas asfálticas. Dá-se especial atenção ao valor do revestimento asfáltico recuperado e a relevância que a reciclagem tem sobre a redução do descarte de resíduos sólidos no meio ambiente. Identifica-se a importância do emprego da reciclagem sobre o comportamento da sociedade. A metodologia adotada tem por base uma revisão bibliográfica dos registros de trabalhos de reciclagem a frio realizados no Brasil e no exterior. Faz-se um relato dos procedimentos de caracterização dos materiais envolvidos e dos cuidados a serem observados para obter-se um produto final de qualidade. Estão aqui descritos os processos industriais de usinagem da mistura reciclada em plantas industriais fixas. É estabelecida uma proposta de definição da viabilidade econômica de emprego da reciclagem a frio em comparação com o revestimento asfáltico tradicional. Ao final são registrados temas a serem estudados visando tornar a reciclagem a frio de revestimentos asfálticos em usinas de áreas urbanas mais conhecida e considerada como alternativa para a melhoria da qualidade de vida nas cidades.

Desenvolvimento de material compósito a base de raspa de pneu e látex para isolamento térmico

The process of recycling has been stimulated by the markets for several reasons, mainly on economical and environmental. Several products have been developed from recycled materials that already exist as well as several residues have been studied in different forms of applications. The greater majority of the applications for thermal insulation in the domestic, commercial and industrial systems have been elaborated in the temperature ranges between low to medium reaching up to 180oC. Many materials such as glass wool, rock wool, polystyrene are being used which are aggressive to the environment. Such materials in spite of the effectiveness in the retention of heat flow, they cost more and when discarded take several years to be absorbed by the nature. This way, in order to adapt to a world politics concerning the preservation of the environment, the present study was intended to develop a material composed of natural/biodegradable materials and industrial residues. The development of such a product in the form of a composite material based on tyre scrapes and latex for thermal insulation is presented in this research work. Thermal and physical properties of the tire scrapes as well as latex were studied in order to use them as raw materials for the manufacture of the intended composite to be applied as a thermal insulator in hot and cold systems varying between 0ºC and 200oC, respectively. Composite blankets were manufactured manually, in weight proportions of 1:1 (50:50%); 1:2 (33:67%) and 2:1 (67:33%) (tire scrapes: latex) respectively. Physical, mechanical and thermal properties of the composites were analyzed to obtain data about the viability of using the composite as a thermal insulator. The analyses carried out were based on standards ABNT, ASTM and UL. The maximum temperature obtained for the composite as a thermal insulator was 200ºC, which meets the range of applications that could be used as a thermal insulator in domestic as well as industrial purposes. The experimental results prove that the composite can be used as a thermal insulator on heated or cooled surface

Análise de desempenho de um fogão solar com parabola fabricada em material compósito

It is presented a solar cooker made with a parabolic reflector composed by a composite material. For this purpose, it was utilized a cast concrete with a parabolic profile obtained by means of modeling. It will be demonstrated the manufacturing process and settings, as well as tests results, in order to determine the contact temperature and cooking time of some foods. This solar cooker presents the following main characteristics: the concentration method, low cost and easy manufacturing process. It was performed by employing recycled materials such as cement, plaster, crushed polystyrene and wheels. The captation area measures 1 square meter and its parabole was covered with a mirrors measuring 25 cm2. A temperature higher than 650°C was obtained. Furthermore, it has been demonstrated that the cooking viability for several type of foods such as beans, potatoes, rice, yams and pasta can be used in two meals for a family of four. In addition, the advantages of this cooker were analysed in comparison with others described in literature as well as those operating on gas. Especially in Northeast of Brazil, where there is a potential for solar energy, this prototype is an important tool, because it avoids not only desertification, but also pollutants from burning firewoods which cause ecological imbalance

O espaço da produção solidária dos catadores de materiais recicláveis: usos e contradições

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Não está cheirando nada bem: condições e efeitos da territorialidade de excluídos, na condição de catadores de materiais recicláveis, em Belém (PA)

Estudo realizado no complexo de disposição final formal da Prefeitura Municipal de Belém e seu entorno, objetivando analisar a c de grupos sociais excluídos, na condição de catadores de materiais recicláveis em Belém (PA) e as ações do poder público que permeiam o quadro atual, a partir da segregação socioeconômica no espaço urbano e sua relação com o lixo, passando pela cartografia da dinâmica do lixo urbano de Belém (PA) e pela análise dos movimentos sociais de catadores, suas potencialidades e fragilidades, propondo interferência nesta territorialidade. Os dados coletados envolvem carga teórica e inserção prática na dinâmica em estudo e as conclusões ratificam um cenário de reprodução do sistema de produção vigente, em uma contextualização de relações de poder muito evidente na territorialidade estudada.

Recycling scrap automotive heat shield insulation material

Automotive heat shields are usually composed of two metal sheets enclosing an insulating material with a paper-like texture that contains refractory ceramic particles. This article discusses the results achieved by recycling the scrap automotive insulation that is discarded in landfills, using the same concept as paper recycling. For comparison with the original product, tests of thickness, bulk density, weight loss on ignition, tensile strength, compressibility, and recovery were performed on recycled materials produced in a so-called "manual" process (involving little automation and performed in adapted facilities) without pressing, and pressed once, twice, and four times. Materials recycled in a so-called "industrial" process (in a paper recycling plant) without pressing, and pressed once were also tested. The recycled materials can be considered approved with respect to the main requirement, thermal insulation, since they dissipated the under-hood temperature by more than 300 A degrees C (like the original product). Like the heat insulation tests, the thermogravimetric analysis suggested that the recycled materials showed higher stability than the original product. Thermogravimetric, microscopy, and energy dispersive spectroscopy analyses indicated that the structural and compositional characteristics of the original product were preserved after recycling.

Verhalten von Recycling-Materialien in der Umwelt : Labor- und Feldversuche

Im Baugewerbe fallen jährlich mehrere Millionen Tonnen an Baureststoffen an, die nach erfolgter Aufbereitung als Recycling-Baustoffe erneut verwendet werden können. Allerdings besteht Unklarheit hinsichtlich der Stofffreisetzung aus Recycling-Materialien sowie der Parameter, die zur Beurteilung im Wesentlichen heranzuziehen sind. Des Weiteren gilt es der Frage nachzugehen, welche Laborversuche eine realistische Prognose zum Stoffaustrag unter Freilandbedingungen ermöglichen. Ein Ergebnisvergleich aus Feld- und Laborversuchen mit Recycling-Materialien zeigt, dass weder Ammoniumnitrat-Extraktion, pH-stat Versuch noch S4- und Modifizierter S4-Test genauere Prognosen zum Stoffaustrag unter Freilandbedingungen ermöglichen. Mit einem Langzeit-Standtest sowie Schüttelversuchen mit unterschiedlichen Wasser/Feststoff-Verhältnissen lässt sich der Einfluss durch verschiedene Korngrößen sowie Materialabrieb besser kontrollieren. Diese Versuchskombination erlaubt Rückschlüsse auf die Löslichkeit und Verfügbarkeit von Stoffen in den Recycling-Materialien. Die Ergebnisse aus Säulenversuchen weisen auf eine gute Vergleichbarkeit mit den Feldversuchen hin, was sich an denselben vorherrschenden Prozessen bei der Freisetzung für eine Reihe von Stoffen zeigt. Bei mehreren Stoffen treten ähnliche Konzen-trationshöchstwerte bei Säulen- und Feldversuch auf, ebenso zeigt der Vergleich aufsummierter Massenanteile für den Säulenversuch, dass bei einer Reihe von Stoffen eine grobe Abschätzbarkeit für eine Langzeitprognose unter Freilandbedingungen existiert. Als wesentliche Parameter für die Stofffreisetzung aus den Recycling-Materialien sind neben CO2-Einfluss und pH-Wert ebenfalls Temperatureinfluss, Material-Heterogenität sowie einzusetzende Korngröße anzusehen.

Determining the Socially Optimal Recycling Rate

What municipal recycling rate is socially optimal? One credible answer would consider the recycling rate that minimizes the overall social costs of managing municipal waste. Such social costs are comprised of all budgetary costs and revenues associated with operating municipal waste and recycling programs, all costs to recycling households associated with preparing and storing recyclable materials for collection, all external disposal costs associated with waste disposed at landfills or incinerators, and all external benefits associated with the provision of recycled materials that foster environmentally efficient production processes. This paper discusses how to estimate these four components of social cost to then estimate the optimal recycling rate. (C) 2013 Elsevier B.V. All rights reserved.

Empleo de materiales reciclados para centros educativos en Chile

Los objetivos de este proyecto son dobles. El primero a conseguir es el acondicionamiento acústico de un centro educativo para alcanzar un mayor rendimiento docente; lo que se pretende lograr mejorando la inteligibilidad de la palabra y reduciendo el ruido en los diferentes recintos. El segundo objetivo, es la reducción de los costos económicos y medioambientales del proyecto empleando en el acondicionamiento acústico materiales procedentes del reciclado o existentes en el entorno local, reduciendo lo mayor posible la importación de estos materiales. Desde la investigación de las exigencias acústicas de un centro educativo, se determinarán los parámetros adecuados para su diseño óptimo. En general los mayores problemas acústicos existentes en estos establecimientos, son debidos a la transferencia de ruido entre los diferentes recintos y su excesiva reverberación, lo que provoca dificultades en la transmisión de la palabra y por ende también en las actividades docentes y los objetivos educativos. Asimismo, los parámetros y exigencias acústicas planteadas y desarrolladas, serán estudiados a partir de un contexto real y específico. El lugar elegido para el caso de estudio, será la ciudad de Santiago de Chile. Es importante, aclarar que en este país no existe una normativa aplicable a este tipo de establecimientos, por tanto se planteará el aislamiento acústico y posterior acondicionamiento a partir de normas y requisitos internacionales. Además, las soluciones acústicas planteadas serán de materiales reciclados existentes en el mercado nacional. Esta decisión tiene como finalidad reducir la afección al medio ambiente fomentando el desarrollo ecológico y sostenible como respuesta al crecimiento económico y la conservación de recursos en un país que se encuentra en vías de desarrollo. Por último, se plantea el acondicionamiento acústico de los diferentes recintos del colegio en proyecto, mediante simulación acústica en el programa EASE (Enhanced Acoustic Simulator for Engineers), lo que nos permite conocer el comportamiento de los recintos antes y después del acondicionamiento acústico. SUMMARY The objective of this Project is twofold. On the one hand, the acoustic conditioning of a school is developed in order to achieve a better teaching performance. For this purpose, the speech intelligibility is enhanced and the noise in the different rooms is reduced. On the other hand, the economic costs and environmental impact are reduced by using recycled materials or materials found in the local area, reducing as much as possible the use of imported materials. The appropriate acoustic parameters will be determined from the evaluation of the acoustic demands of the school. The main problems in these environments are the noise transmission between rooms as well as a high reverberation time. These will cause problems with the speech transmission, which is of great importance for educational purposes. Furthermore, the acoustic parameters and requirements are taken from a real and specific context. The place chosen for the research is Santiago, Chile. It is remarkable that in this country there is no national legislation that can be applied to such places, therefore International Standards are considered to evaluate the acoustic insulation and conditioning. The acoustic solutions considered in this project come from recycled materials existing on the domestic market. The decision aims to reduce the environmental impact, promoting environmentally sustainable development as a response to the economic growth and the maintenance of resources in a developing country. Finally, a simulation at some different areas of the school is carried out, comparing the behaviour before and after the proposed acoustic solutions. The software used for the simulations is EASE (Enhanced Acoustic Simulator for Engineers).

Desarrollo experimental de un elemento constructivo de envolvente, no estructural, a partir de una matriz de plástico reciclado, reforzado con fibras naturales y/o sintéticas

Esta Tesis trata sobre el diseño y desarrollo de un material constructivo de fachada (tras ventilada), empleando plástico reciclado (granza de caucho, de neumáticos fuera de uso) para su elaboración. El uso de materiales reciclados para la elaboración de nuevos materiales constructivos, es a día de hoy, un valor agregado que contribuye tanto a la disminución de desechos tóxicos, como a la fabricación de productos de alta calidad. La investigación partió de la necesidad de comprender qué es un plástico, cómo son producidos, cuáles son los factores que permitían su reciclaje y qué propiedades podrían ser aprovechadas para desarrollar un nuevo material constructivo. En el estado del arte, fueron analizados los aspectos del plástico relacionados a su composición, propiedades, tipologías, producción, consumo, legislación europea y española, reciclaje y valorización energética. Para analizar más profundamente los materiales desarrollados a partir de plásticos reciclados, desde textiles hasta elementos constructivos. Con el conocimiento adquirido mediante este análisis previo, se diseñó una metodología de experimentación, utilizando caucho reciclado y derivados del yeso como agregados, en una matriz de resinas poliméricas reforzada con fibras naturales y sintéticas. Los resultados obtenidos en los ensayos físicos y térmicos, con los elementos producidos, demostraron que el material tiene una excelente resistencia a tensión así como una baja conductividad térmica. Esta investigación, servirá como precedente para el desarrollo de nuevos materiales y sistemas constructivos, utilizando agregados de plástico reciclado, en los procesos de fabricación. Ya que ha comprobado el enorme potencial que ofrecen, creando nuevos materiales, y contribuyendo a reducir la contaminación medio ambiental. "La mayor recompensa de nuestro trabajo no es lo que nos pagan por él, sino aquello en lo que nos convierte". John Ruskin Material compuesto (Composite) de caucho reciclado, fibras y resinas poliméricas. ABSTRACT This thesis deals with the design and development of a new facade construction material using recycled plastic (rubber pellets from used tires) for processing. The use of recycled materials for the development of new building materials, today is an added value which contributes both to the reduction of toxic waste, as well as the processing of products of good quality. The research derives from the need to understand what a plastic is, how they are produced, what the factors that allowed recycling are and what properties can be exploited to develop a new building material. In the prior art, were analyzed plastic aspects related to its composition, properties, typologies, production, consumption, European and Spanish legislation, recycling and energy recovery. To further analyze the materials developed from recycled plastics, from textiles to construction elements. With the knowledge gained from this previous analysis, we designed an experimental approach using recycled rubber and plaster derivatives as aggregates in a polymeric resin matrix reinforced with natural and synthetic fibers. The results obtained in physical and thermal testing, with the elements produced, showed that the material has excellent tensile strength and a low thermal conductivity. This research will serve as a precedent for the development of new materials and building systems, using recycled plastic aggregates in the manufacturing processes. Since it was found the enormous potential, creating new materials, and helping reduce environmental pollution. "The greatest reward of our work is not what we get paid for it, but what they make us."

Estrategias de desarrollo sostenible de la arquitectura del oasis de M’hamid, desierto del Sahara

Esta investigación se plantea con la hipótesis radical de cómo habitar el desierto de forma sostenible, desde una actitud pragmática y experimental basada en el progreso. La justificación se basa en primer lugar en los 2.000 millones de personas en el mundo que viven en entornos desérticos, el 80% de ellas, en países en desarrollo, porque el 40% de la superficie terrestre está bajo amenaza de desertificación afectando al 37% de la población mundial, con 12 millones de hectáreas al año perdidas por esa causa, y por último, porque se considera el desierto como un entorno de gran atractivo y potencial. El contenido de la investigación se estructura en tres movimientos: posicionamiento, mirada y acción: Desde el posicionamiento se define en primer lugar la sostenibilidad, aportando un nuevo diagrama donde se incorpora el ámbito arquitectónico como uno de los pilares principales, y, posteriormente, se establecen los criterios de evaluación de la sostenibilidad, aportando un sistema de indicadores donde se incorporan parámetros adecuados a las circunstancias del oasis. Del mismo modo, se estudian y analizan metodologías de actuación y proyectos de desarrollo sostenible existentes que enmarcan el estado del arte, constatando la dificultad de adaptación de los mismos a las condiciones de los oasis, por lo que se elabora una metodología propia donde se modifica la dinámica estratégica, de forma que el impulso se plantea desde la acción social, a través de hipótesis de estrategias basadas en sistemas low-cost, autoconstruidas, asumibles económicamente y de implantación factible. El caso de estudio específico radica en la situación extrema de las condiciones en el oasis de M’hamid, donde se evidencia un proceso de desintegración y abandono. Esto es debido a una acumulación de circunstancias externas e internas, de múltiples factores: naturales y antrópicos que afectan al oasis, llevando al extremo las condiciones climáticas y la escasez de recursos, naturales y artificiales. Factores como el cambio climático, la sequía, los cambios en las políticas del agua, la amenaza de desertificación, los conflictos sociales, el desequilibrio ecológico, la escasez económica, la crisis energética, la obsolescencia arquitectónica, el patrimonio construido prácticamente destruido, y la malentendida nueva arquitectura. Es importante constatar la escasa documentación gráfica existente sobre la zona de actuación lo que ha conllevado un amplio trabajo de documentación, tanto cartográfica como de observación directa, aportada a la tesis como investigación de elaboración propia. La mirada analítica al caso de estudio permite conocer los recursos disponibles y las potencialidades latentes del oasis de M’hamid, que permitirán actuar para subvertir la dinámica involutiva imperante, de forma que los dibujos iniciales de apropiación contextual y análisis críticos derivan en mapas de acción diagramados conformados por un sistema de objetos y la definición de estrategias transversales, deconstruyendo el pasado y reconstruyendo el futuro, incorporando sistemas alternativos que se definen en 7 líneas estratégicas de acción formuladas desde los 3 ámbitos relacionados con el ecosistema: ecológico, socio- económico y arquitectónico. Así, la tesis defiende la acción arquitectónica como impulsora del desarrollo sostenible, apoyada en 3 elementos: - la creación de objetos “tecnoartesanos”, para el aprovechamiento de los recursos energéticos - las transformaciones arquitectónicas, para reformular el hábitat desde la eficiencia energética y el progreso - y el impulso de acciones cotidianas, que redefinan las relaciones sociales, creando entornos cooperativos y colaborativos. En el ámbito ecológico se proponen actuaciones anti desertificación mediante incubadoras de árboles; sistemas alternativos de gestión del agua, como la lluvia sólida; estrategias de potenciación de la producción agrícola; la construcción de mecanismos de obtención de energía a partir de residuos, como los paneles solares con botellas PET. En el ámbito socioeconómico se plantean nuevas formas de acción social y de reactivación económica. Por último, en el ámbito urbano-arquitectónico, se incorporan modificaciones morfológicas a la arquitectura existente y una relectura contemporánea de la tierra, como material que permite nuevas geometrías, obteniendo arena petrificada por procesos microbiológicos, y potenciando la tierra como recurso artístico. Esta tesis es un punto de partida, recoge sistemas, estrategias y experiencias, para funcionar como un estímulo o impulso dinamizador del futuro desarrollo sostenible del oasis, abriendo vías de investigación y experimentación. ABSTRACT This research puts forth the radical hypothesis of how to inhabit the desert in a sustainable way, using a pragmatic and experimental approach based on progress. The justification for this resides in the fact that there are 2,000 million people in the world living in desert environments, 80% of them in developing countries. Forty percent of the earth’s surface is under threat of desertification, affecting 37% of the world population and with 12 million hectares being lost each year. And finally, the desert is considered as an attractive environment and therefore, with great potential. The content of the research is structured in three main sections: positioning, observation and action: As a point of departure, sustainability is defined, proposing a new framework where architecture is incorporated as one of the main pillars. Then, the criteria for evaluating sustainability are established. These provide a system of indicators, which incorporate parameters based on the specific circumstances of the oasis. Methodologies and existing sustainable development projects that represent the state-of-the-art are analyzed, discussing the difficulty of adapting them to conditions of oases. A methodology that modifies strategic concepts is developed, whereby the catalyst is social action, and strategies are developed based on low-cost, self-built, and feasible implementation systems. The specific case study lies in the extreme conditions in the oasis of M'hamid, where a process of decay and neglect is evident. This deterioration is due to an accumulation of external and internal circumstances, and of natural and anthropogenic factors that affect the oasis, leading to extreme weather conditions and a shortage of both natural and artificial resources. Factors include; climate change, drought, changes in water policies, the threat of desertification, social conflicts, ecological imbalance, economic shortage, the energy crisis, architectural obsolescence, destruction of built heritage, and misunderstood new architecture. It is important to note the extremely limited graphic information about the area has led me to produce an extensive archive of maps and drawings, many developed by direct observation, that contribute to the research. The case study analysis of the oasis of M'hamid examines the resources available and the latent potential to slow the prevailing trend towards deterioration. The initial drawings of contextual appropriation and critical analysis result in maps and diagrams of action, which are formed by a system of objects and the definition of strategies. These can be thought of as understanding or “deconstructing” the past to reconstruct the future. Alternative approaches defined in seven strategies for action are based on three fields related to the ecosystem: ecological, socioeconomic and architectural. Thus, the thesis defends architectural action to promote sustainable development, based on three elements: - The creation of "techno-artisans", to make use of energy resources - Architectural changes, to reformulate habitat in terms of energy efficiency and progress - And the promotion of everyday actions, to redefine social relations, creating cooperative and collaborative environments. In the ecological field, I propose anti-desertification actions such as; tree incubators, alternative water management systems(such as solid rain),; strategies to empower the agricultural production, energy from low-cost systems made out from recycled materials(such as solar panels from PET bottles or wind turbine from bicycle wheels). In the socioeconomic sphere, I propose to implement new forms of social action and economic regeneration. Finally, within the urban and architectural field, I propose morphological changes to the existing architecture and a contemporary reinterpretation of the earth as a material that allows new geometries, creating petrified sand by microbiological processes or enhancing nature as an artistic and energy resource. This thesis is a starting point. It collects systems, strategies and experiences to serve as a stimulus or dynamic momentum for future sustainable development of the oasis, opening new avenues of research and experimentation. RÉSUMÉ Cette recherche part d'une hypothèse radicale : comment habiter le désert de façon durable, et ce à partir d'une approche pragmatique et expérimentale basée sur le progrès. Cette hypothèse se justifie en raison des 2 milliards de personnes qui dans le monde habitent des environnements désertiques, 80% d'entre eux dans des pays en voie de développement, mais aussi parce que 40% de la surface de la planète est sous menace de désertification, un phénomène affectant 37% de la population mondiale et qui cause la perte de 12 millions d'hectares par an; et enfin parce que le désert est considéré comme un environnement très attrayant et fort d’un grand potentiel. Le contenu de la recherche se divise en trois mouvements: le positionnement, le regard et l'action : Du point de vue du positionnement on définit tout d'abord la durabilité, présentant un nouveau schéma où le domaine de l'architecture devient un des principaux piliers, et, par la suite, des critères d'évaluation de la durabilité sont établis, en fournissant un système d’indicateurs qui intègre les paramètres appropriés aux circonstances de l'oasis. De même, des méthodologies et des projets de développement durable existants sont étudiés et analysés, ce qui encadre l'état de l'art, remarquant la difficulté de les adapter aux conditions des oasis. De cette difficulté découle l'élaboration d'une méthodologie qui modifie la dynamique stratégique, de sorte que l'impulsion provient de l'action sociale, à travers des hypothèses de stratégie basées sur des systèmes low-cost, auto-construits, et de mise en oeuvre économiquement viable. Le cas d'étude spécifique réside en la situation extrême des conditions de l'oasis de M’hamid, où un processus de décadence et de négligence est évident. Cela est dû à une accumulation de circonstances externes et internes, de multiples facteurs: les facteurs naturels et anthropiques qui affectent l'oasis, menant à l'extrême les conditions météorologiques et la pénurie de ressources, autant naturelles qu'artificielles. Des facteurs tels que le changement climatique, la sécheresse, les changements dans les politiques de l'eau, la menace de la désertification, les conflits sociaux, le déséquilibre écologique, la pénurie économique, la crise de l'énergie, l'obsolescence architecturale, le patrimoine bâti pratiquement détruit et une mauvais compréhensif de la nouvelle architecture. Il est important de de faire remarquer le peu d'informations graphiques du domaine d'action, ce qui a conduit à un vaste travail de documentation, autant cartographique que relative à l'observation directe. Cette documentation s'ajoute à la thèse en tant que recherche propre. Le regard analytique sur le cas d'étude permet de connaître les ressources disponibles et le potentiel latent de l'oasis de M’hamid, qui agiront pour renverser la dynamique d'involution en vigueur. Ainsi, les premiers dessins d'appropriation contextuelle et analyse critique deviennent des cartes d'action schématisées formées par un système d'objets et la définition de stratégies transversales, qui déconstruisent le passé et reconstruisent l'avenir, en incorporant des systèmes alternatifs qui se définissent sur 7 lignes stratégiques d'action formulées à partir des 3 domaines en relation avec l’écosystème: l’écologique, le socio-économique et l'architectural. Ainsi, la thèse défend l'action architecturale en tant que promotrice du développement durable, et ce basé sur 3 éléments: - la création d'objets "technoartisans" pour l'exploitation des ressources énergétiques - les modifications architecturales, pour reformuler l'habitat du point de vue de l'efficacité énergétique et le progrès - et la promotion des actions quotidiennes, pour redéfinir les relations sociales, et la création d'environnements de coopération et collaboration. Dans le domaine de l'écologie des actions de lutte contre la désertification sont proposées à travers des pépinières d'arbres, des systèmes alternatifs de gestion de l'eau comme par exemple la pluie solide, des stratégies de mise en valeur de la production agricole, la construction de mécanismes de production d'énergie à partir de résidus, tels que les panneaux solaires ou les bouteilles en PET. Dans le domaine socio-économique, l'on propose de nouvelles formes d'action sociale et de reprise économique. Enfin, dans le domaine de l'urbain et de l'architectural, on incorpore des changements morphologiques à l'architecture existante et une relecture contemporaine de la terre, comme matériau qui permet de nouvelles géométries, en obtenant du sable pétrifié par des procédés microbiologiques et en mettant en valeur la terre comme une ressource artistique. Cette thèse n'est qu'un point de départ. Elle recueille des systèmes, des stratégies et des expériences pour servir de stimulus ou d'impulsion dynamisatrice du futur développement durable de l'oasis, en ouvrant des voies de recherche et d'expérimentation.

Improving urban park design: A comparative and analytical study addressing resources available and components necessary to improve the environmental and economic sustainability of urban parks

Urban parks have long been valued for the environmental, social, and economic benefits they provide. Increasingly, parks are also being recognized as features important for sustainable city design. This Capstone Project will identify, compare, analyze, and discuss means for designing sustainable urban parks. Recommendations for designing sustainable urban parks, based on project results, include: 1) ensure park features will support high levels of human activity; 2) use gravel to construct park trails; 3) purchase playground structures made of recycled materials; 4) plant a high number of perennials in flowerbeds and other vegetated areas; 5) plant climate-appropriate plants in vegetated areas; 6) ensure parks have high levels of plant diversity; and 7) develop future studies further exploring sustainable park design.