Defining green road infrastructure projects—A critical review

Green infrastructure is considered as a strategic approach to address the ecological and social impacts of urban sprawl. The main elements of green infrastructure have been well established and include a series of multifunctional ecological systems, such as green urban space, green road infrastructure and the links between these systems. However, it should be noted that the elements of green road infrastructure have only been briefly mentioned in isolated life cycle stages, e.g. design, procurement, construction, maintenance and operation. The definition of green road infrastructure and the elements in green road infrastructure projects remain largely unknown. To explore the elements in green road infrastructure, a critical review was adopted. As the development of green road infrastructure projects is guided by rating systems, a comparison of three major green roads rating systems, including GreenroadsTM, EnvisionTM and Infrastructure Sustainability Rating Tool—IS, was conducted. The comparison reveals that green roads can be defined as road projects that have superior performance in economic, social and environmental sustainability. The sustainability features in green roads mainly include environmental sustainability, social sustainability, economic sustainability, quality, pavement technology and innovation. The results will contribute to an increased understanding of green roads and will be useful to improve the performance of road projects on these sustainability features.

A digital imaging technique to quantify the incidence of internal browning in potato (Solanum tuberosum) tubers

Internal browning disorders, including brown fleck (BF), in potato (Solanum tuberosum) tubers greatly reduce tuber quality, but the causes are not well understood. This is due, in part, to the highly variable data provided by visual value-based rating systems. A digital imaging technique was developed to quantify accurately the incidence of internal browning in potato tubers. Images of tuber sections were scanned using a flatbed scanner and digitally enhanced to highlight tuber BF lesions, and the area of affected tissue calculated using pixel quantification software. Digital imaging allowed for the determination of previously unused indices of the incidence and severity of internal browning in potato tubers. Statistical analysis of the comparison between digitally derived and visual-rating BF data from a glasshouse experiment showed that digital data greatly improved the delineation of treatment effects. The F-test probability was further improved through square root or logarithmic data transformations of the digital data, but not of the visual-rating data. Data from a field experiment showed that the area of tuber affected by BF and the number of small BF lesions increased with time and with increase in tuber size. The results from this study indicate that digital imaging of internal browning disorders of potato tubers holds much promise in determining their causes that heretofore have proved elusive.

Understanding distributions of chess performances

This paper presents evidence for several features of the population of chess players, and the distribution of their performances measured in terms of Elo ratings and by computer analysis of moves. Evidence that ratings have remained stable since the inception of the Elo system in the 1970’s is given in several forms: by showing that the population of strong players fits a simple logistic-curve model without inflation, by plotting players’ average error against the FIDE category of tournaments over time, and by skill parameters from a model that employs computer analysis keeping a nearly constant relation to Elo rating across that time. The distribution of the model’s Intrinsic Performance Ratings can hence be used to compare populations that have limited interaction, such as between players in a national chess federation and FIDE, and ascertain relative drift in their respective rating systems.

Proposta de método para avaliação do desempenho térmico de residências unifamiliares em clima quente e úmido

Nowadays, evaluation methods to measure thermal performance of buildings have been developed in order to improve thermal comfort in buildings and reduce the use of energy with active cooling and heating systems. However, in developed countries, the criteria used in rating systems to asses the thermal and energy performance of buildings have demonstrated some limitations when applied to naturally ventilated building in tropical climates. The present research has as its main objective to propose a method to evaluate the thermal performance of low-rise residential buildings in warm humid climates, through computational simulation. The method was developed in order to conceive a suitable rating system for the athermal performance assessment of such buildings using as criteria the indoor air temperature and a thermal comfort adaptive model. The research made use of the software VisualDOE 4.1 in two simulations runs of a base case modeled for two basic types of occupancies: living room and bedroom. In the first simulation run, sensitive analyses were made to identify the variables with the higher impact over the cases´ thermal performance. Besides that, the results also allowed the formulation of design recommendations to warm humid climates toward an improvement on the thermal performance of residential building in similar situations. The results of the second simulation run was used to identify the named Thermal Performance Spectrum (TPS) of both occupancies types, which reflect the variations on the thermal performance considering the local climate, building typology, chosen construction material and studied occupancies. This analysis generates an index named IDTR Thermal Performance Resultant Index, which was configured as a thermal performance rating system. It correlates the thermal performance with the number of hours that the indoor air temperature was on each of the six thermal comfort bands pre-defined that received weights to measure the discomfort intensity. The use of this rating system showed to be appropriated when used in one of the simulated cases, presenting advantages in relation to other evaluation methods and becoming a tool for the understanding of building thermal behavior

Análise de métodos de predição de conforto térmico de habitação em clima quente-úmido com condicionamento passivo

The assessment of building thermal performance is often carried out using HVAC energy consumption data, when available, or thermal comfort variables measurements, for free-running buildings. Both types of data can be determined by monitoring or computer simulation. The assessment based on thermal comfort variables is the most complex because it depends on the determination of the thermal comfort zone. For these reasons, this master thesis explores methods of building thermal performance assessment using variables of thermal comfort simulated by DesignBuilder software. The main objective is to contribute to the development of methods to support architectural decisions during the design process, and energy and sustainable rating systems. The research method consists on selecting thermal comfort methods, modeling them in electronic sheets with output charts developed to optimize the analyses, which are used to assess the simulation results of low cost house configurations. The house models consist in a base case, which are already built, and changes in thermal transmittance, absorptance, and shading. The simulation results are assessed using each thermal comfort method, to identify the sensitivity of them. The final results show the limitations of the methods, the importance of a method that considers thermal radiance and wind speed, and the contribution of the chart proposed

Estudo citogenético e imunocitoquímico em Triatomíneos (Heteroptera, Reduviidae)

Pós-graduação em Genética - IBILCE

Showing that Early Childhood Education Works: Lessons from Italy, China, and the USA

Lessons from around the world; What does it matter about early childhood education? Why the controversy about public support for early childhood education? What process or system should be used to determine what works in early education? Can the same process be used to improve services? What is the role of government? Alternatives: 1. Consumers should determine… (What happens when private choices drive the market for early childhood services?) Observed quality of care in four Midwestern states; Parent data: “All things considered, how would you grade the quality of the care your child is receiving from his/her current caregiver?” Role of government What is a Quality Rating System? Ten states have implemented statewide systems (e.g. Colorado, Kentucky, Oklahoma, North Carolina) Findings 2. Objective science should determine… Firm findings from empirical research 3. Something else is needed: Some differences between Italian and American models. Teacher action research (and documentation) from a Reggio-inspired preschool in South Korea by Misuk Kim. Teacher Action Research at the Ruth Staples CDL. Can we now answer our opening questions? What process or system should be used to determine what is best for young children? Can the same process be used to improve the quality of services? Conclusions: The free market does not work well to determine quality in early education and care; Licensing, accreditation, and quality rating systems can help improve the market; Empirical research is useful for measuring what works; Teacher action research (reflective practice) is necessary for fostering continuous quality improvement. The tower of quality.

Future-Proofing: Seeking Resilience in the Historic Built Environment

Thesis (Master's)--University of Washington, 2016-06

Növelhető-e a csőd-előrejelző modellek előre jelző képessége az új klasszifikációs módszerek nélkül? (Can the predictive capacity of bankruptcy forecasting models be increased without new classification methods?)

A Bázel–2. tőkeegyezmény bevezetését követően a bankok és hitelintézetek Magyarországon is megkezdték saját belső minősítő rendszereik felépítését, melyek karbantartása és fejlesztése folyamatos feladat. A szerző arra a kérdésre keres választ, hogy lehetséges-e a csőd-előrejelző modellek előre jelző képességét növelni a hagyományos matematikai-statisztikai módszerek alkalmazásával oly módon, hogy a modellekbe a pénzügyi mutatószámok időbeli változásának mértékét is beépítjük. Az empirikus kutatási eredmények arra engednek következtetni, hogy a hazai vállalkozások pénzügyi mutatószámainak időbeli alakulása fontos információt hordoz a vállalkozás jövőbeli fizetőképességéről, mivel azok felhasználása jelentősen növeli a csődmodellek előre jelző képességét. A szerző azt is megvizsgálja, hogy javítja-e a megfigyelések szélsőségesen magas vagy alacsony értékeinek modellezés előtti korrekciója a modellek klasszifikációs teljesítményét. ______ Banks and lenders in Hungary also began, after the introduction of the Basel 2 capital agreement, to build up their internal rating systems, whose maintenance and development are a continuing task. The author explores whether it is possible to increase the predictive capacity of business-failure forecasting models by traditional mathematical-cum-statistical means in such a way that they incorporate the measure of change in the financial indicators over time. Empirical findings suggest that the temporal development of the financial indicators of firms in Hungary carries important information about future ability to pay, since the predictive capacity of bankruptcy forecasting models is greatly increased by using such indicators. The author also examines whether the classification performance of the models can be improved by correcting for extremely high or low values before modelling.

Hallux rigidus: Arthroplasty or arthrodesis. What technique produces better results?

Hallux rígidus (HR) affects the first metatarsophalangeal joint (MTPJ) between 35% and 60% of the population over 65 years and there are multiple ways of treatment. Depending on the radiological stage where you find the deformity determines the procedure to be performed; in the early stages cheilectomy techniques and corrective osteotomy is performed while the more advanced ratings, the surgeon chooses destructive techniques considered as arthrodesis and arthroplasty. This final of degree project aims to focus on 1 MTPJ destructive techniques to clarify which of the procedures generates better results by a number of parameters; outcomes of the American Orthopaedic Foot scale and Ankle Society Hallux metatarsophalangeal Interphalangeal-scale (AOFAS), range of motion (ROM) of the 1ºAMTF, radiological classification. As for the implant arthroplasty technique, this article offers information on material and design that generates better relating to patient characteristics such as age, inflammatory joint diseases, viability and durability of the implant results. The conclusion from this review is that the values obtained in the arthrodesis according AOFAS decrease due to loss of mobility, but both techniques have similar values of effectiveness and concludes with the decision that the technique used is determined taking into account various factors and patient characteristics. Keywords: Hallux rígidus; (Hallux Rígidus) and surgery treatment; Hallux Rígidus arthrodesis; Hallux Rígidus arthroplasty; Hallux Rígidus (arthroplasty and arthrodesis).

Proposta de método para avaliação do desempenho térmico de residências unifamiliares em clima quente e úmido

Nowadays, evaluation methods to measure thermal performance of buildings have been developed in order to improve thermal comfort in buildings and reduce the use of energy with active cooling and heating systems. However, in developed countries, the criteria used in rating systems to asses the thermal and energy performance of buildings have demonstrated some limitations when applied to naturally ventilated building in tropical climates. The present research has as its main objective to propose a method to evaluate the thermal performance of low-rise residential buildings in warm humid climates, through computational simulation. The method was developed in order to conceive a suitable rating system for the athermal performance assessment of such buildings using as criteria the indoor air temperature and a thermal comfort adaptive model. The research made use of the software VisualDOE 4.1 in two simulations runs of a base case modeled for two basic types of occupancies: living room and bedroom. In the first simulation run, sensitive analyses were made to identify the variables with the higher impact over the cases´ thermal performance. Besides that, the results also allowed the formulation of design recommendations to warm humid climates toward an improvement on the thermal performance of residential building in similar situations. The results of the second simulation run was used to identify the named Thermal Performance Spectrum (TPS) of both occupancies types, which reflect the variations on the thermal performance considering the local climate, building typology, chosen construction material and studied occupancies. This analysis generates an index named IDTR Thermal Performance Resultant Index, which was configured as a thermal performance rating system. It correlates the thermal performance with the number of hours that the indoor air temperature was on each of the six thermal comfort bands pre-defined that received weights to measure the discomfort intensity. The use of this rating system showed to be appropriated when used in one of the simulated cases, presenting advantages in relation to other evaluation methods and becoming a tool for the understanding of building thermal behavior

Análise de métodos de predição de conforto térmico de habitação em clima quente-úmido com condicionamento passivo

The assessment of building thermal performance is often carried out using HVAC energy consumption data, when available, or thermal comfort variables measurements, for free-running buildings. Both types of data can be determined by monitoring or computer simulation. The assessment based on thermal comfort variables is the most complex because it depends on the determination of the thermal comfort zone. For these reasons, this master thesis explores methods of building thermal performance assessment using variables of thermal comfort simulated by DesignBuilder software. The main objective is to contribute to the development of methods to support architectural decisions during the design process, and energy and sustainable rating systems. The research method consists on selecting thermal comfort methods, modeling them in electronic sheets with output charts developed to optimize the analyses, which are used to assess the simulation results of low cost house configurations. The house models consist in a base case, which are already built, and changes in thermal transmittance, absorptance, and shading. The simulation results are assessed using each thermal comfort method, to identify the sensitivity of them. The final results show the limitations of the methods, the importance of a method that considers thermal radiance and wind speed, and the contribution of the chart proposed

Proposta de método para avaliação do desempenho térmico de residências unifamiliares em clima quente e úmido

Nowadays, evaluation methods to measure thermal performance of buildings have been developed in order to improve thermal comfort in buildings and reduce the use of energy with active cooling and heating systems. However, in developed countries, the criteria used in rating systems to asses the thermal and energy performance of buildings have demonstrated some limitations when applied to naturally ventilated building in tropical climates. The present research has as its main objective to propose a method to evaluate the thermal performance of low-rise residential buildings in warm humid climates, through computational simulation. The method was developed in order to conceive a suitable rating system for the athermal performance assessment of such buildings using as criteria the indoor air temperature and a thermal comfort adaptive model. The research made use of the software VisualDOE 4.1 in two simulations runs of a base case modeled for two basic types of occupancies: living room and bedroom. In the first simulation run, sensitive analyses were made to identify the variables with the higher impact over the cases´ thermal performance. Besides that, the results also allowed the formulation of design recommendations to warm humid climates toward an improvement on the thermal performance of residential building in similar situations. The results of the second simulation run was used to identify the named Thermal Performance Spectrum (TPS) of both occupancies types, which reflect the variations on the thermal performance considering the local climate, building typology, chosen construction material and studied occupancies. This analysis generates an index named IDTR Thermal Performance Resultant Index, which was configured as a thermal performance rating system. It correlates the thermal performance with the number of hours that the indoor air temperature was on each of the six thermal comfort bands pre-defined that received weights to measure the discomfort intensity. The use of this rating system showed to be appropriated when used in one of the simulated cases, presenting advantages in relation to other evaluation methods and becoming a tool for the understanding of building thermal behavior

Análise de métodos de predição de conforto térmico de habitação em clima quente-úmido com condicionamento passivo

The assessment of building thermal performance is often carried out using HVAC energy consumption data, when available, or thermal comfort variables measurements, for free-running buildings. Both types of data can be determined by monitoring or computer simulation. The assessment based on thermal comfort variables is the most complex because it depends on the determination of the thermal comfort zone. For these reasons, this master thesis explores methods of building thermal performance assessment using variables of thermal comfort simulated by DesignBuilder software. The main objective is to contribute to the development of methods to support architectural decisions during the design process, and energy and sustainable rating systems. The research method consists on selecting thermal comfort methods, modeling them in electronic sheets with output charts developed to optimize the analyses, which are used to assess the simulation results of low cost house configurations. The house models consist in a base case, which are already built, and changes in thermal transmittance, absorptance, and shading. The simulation results are assessed using each thermal comfort method, to identify the sensitivity of them. The final results show the limitations of the methods, the importance of a method that considers thermal radiance and wind speed, and the contribution of the chart proposed

Evaluación de desenlace: trasplante meniscal versus segunda meniscectomía

Introducción: El incremento de pacientes sintomáticos de rodilla y la osteoartrosis en jóvenes con limitadas posibilidades terapéuticas después de una meniscectomía, genera la búsqueda de alternativas terapéuticas. A pesar que es poco utilizado en Colombia, el trasplante meniscal es una propuesta para el manejo sintomático. Según cifras norteamericanas, se practican entre 700.000 a 1.500.000 artroscopias de rodilla anualmente, el 50% termina en meniscectomía y de este un 40% persisten sintomáticos. Métodos: Estudio de cohorte retrospectivo, con el objetivo de evaluar dolor (Escala Visual Análoga-EVA) y funcionalidad (Escala de Tegner y Lysholm) en los pacientes a quienes se les realizó trasplante meniscal o meniscectomía por segunda vez, entre los años 2007 a 2015. Resultados: A partir de los 6 meses la EVA mostró una tendencia a la mejoría en el grupo de trasplante meniscal, pasando de Moderado a Leve (p: <0.000). La Escala de Tegner y Lysholm cambió de Pobre a Bueno en el grupo de segunda meniscectomía (p= 0.008) y de Bueno a Excelente en el grupo trasplantado (p=0.225). La calificación promedio de la EVA en el grupo de trasplante presentó mejoría (p=<0.000), a diferencia del grupo de segunda meniscectomía (p=0.591). La escala de Tegner y Lysholm, mostró significancia estadística con tendencia a la mejoría en el grupo de segunda meniscectomía. Discusión: Los resultados muestran que con trasplante meniscal hay mejoría del dolor y la funcionalidad versus un segunda meniscectomía. Para fortalecer la evidencia de este tratamiento son necesarios estudios prospectivos complementarios.