Synthesis of acicular hydrogoethite (alpha-FeOOH center dot xH(2)O; 0.1 < x < 0.22) particles using morphology controlling cationic additives and magnetic properties of maghemite derived from hydrogoethite

A method for the preparation of acicular hydrogoethite (alpha -FeOOH.xH(2)O, 0.1 < x < 0.22) particles of 0.3-1 mm length has been optimized by air oxidation of Fe( II) hydroxide gel precipitated from aqueous (NH4)(2)Fe(SO4)(2) solutions containing 0.005-0.02 atom% of cationic Pt, Pd or Rh additives as morphology controlling agents. Hydrogoethite particles are evolved from the amorphous ferrous hydroxide gel by heterogeneous nucleation and growth. Preferential adsorption of additives on certain crystallographic planes thereby retarding the growth in the perpendicular direction, allows the particles to acquire acicular shapes with high aspect ratios of 8-15. Synthetic hydrogoethite showed a mass loss of about 14% at similar to 280 degreesC, revealing the presence of strongly coordinated water of hydration in the interior of the goethite crystallites. As evident from IR spectra, excess H2O molecules (0.1- 0.22 per formula unit) are located in the strands of channels formed in between the double ribbons of FeO6 octahedra running parallel to the c- axis. Hydrogoethite particles constituted of multicrystallites are formed with Pt as additive, whereas single crystallite particles are obtained with Pd (or Rh). For both dehydroxylation as well as H-2 reduction, a lower reaction temperature (similar to 220 degreesC) was observed for the former (Pt treated) compared to the latter (Pd or Rh) (similar to 260 degreesC). Acicular magnetite (Fe3O4) was prepared either by reducing hydrogoethite (magnetite route) or dehydroxylating hydrogoethite to hematite and then reducing it to magnetite (hematite- magnetite route). According to TEM studies, preferential dehydroxylation of hydrogoethite along < 010 > leads to microporous hematite. Maghemite (gamma -Fe2O3 (-) (delta), 0 < < 0.25) was obtained by reoxidation of magnetite. The micropores are retained during the topotactic transformation to magnetite and finally to maghemite, whereas cylindrical mesopores are formed due to rearrangement of the oxygen sublattice from hexagonal to cubic close packing during the conversion of hydrogoethite to magnetite and then to maghemite. Accordingly, three different types of maghemite particles are realized: strongly oriented multicrystalline particles, single crystalline acicular particles with micropores or crystallites having mesopores. Higher values of saturation magnetization ((s) = 74 emu g(-1)) and coercivity (H-c = 320 Oe) are obtained for single crystalline mesoporous particles. In the other cases, the smaller size of particles and larger distribution of micropores decreases sigma (s) considerably ( < 60 emu g(-1)) due to relaxation effects of spins on the surface atoms as revealed by Mossbauer spectroscopy.

Microscopic dynamics of nanoparticle monolayers at air-water interface

We present results of surface mechanical and particle tracking measurements of nanoparticles trapped at the air-water interface as a function of their areal density. We monitor both the surface pressure (II) and isothermal compression modulus (epsilon) as well as the dynamics of nanoparticle clusters, using fluorescence confocal microscopy while they are compressed to very high density near the two dimensional close packing density Phi similar to 0.82. We observe non-monotonic variation in both epsilon and the dynamic heterogeneity, characterized by the dynamical susceptibility chi(4) with Phi, in such high density monolayers. We provide insight into the underlying nature of such transitions in close packed high density nanoparticle monolayers in terms of the morphology and flexibility of these soft colloidal particles.. We discuss the significance our results in the context of related studies on two dimensional granular or colloidal systems. (C) 2013 Elsevier Inc. All rights reserved.

Diaminotriazine substituted diphenyl ether: reversible structural transformation and solvent dependent solid state fluorescence

The effect of molecular shape and position of hydrogen bonding functionality in the solid state structural self-assembly was investigated using diaminotriazine substituted diphenyl ether based positional isomers (1-5). The molecular shape was modulated by changing diaminotriazine position that produced channel supramolecular structures in 1, 3 and 5. There exists a direct correlation between the molecular shape and three dimensional structures; more linear molecules resulted in close-packing whereas molecules with a labyrinthine topology formed a channel structure. Supramolecular aspects pertaining to the influence of solvent of crystallization in structure formation and reversible structural transformation in solid state were also explored. 1-5 exhibited tunable solid state fluorescence (lambda(max) = 437-496 nm) depending on the diaminotriazine substitutional position and 3 showed solvent-dependent solid state fluorescence. The present study describes the generation of a supramolecular channel structure with functional properties such as tunable fluorescence by varying the position of hydrogen bond functionality and solvent of crystallization.

Comparative high pressure Raman studies on perfluorohexane and perfluoroheptane

High pressure Raman spectroscopic studies on perfluorohexane and perfluoroheptane have performed up to 12 GPa. Perfluorohexane under goes two pressure induced transitions: (1) liquid-solid transition at 1.6 GPa and (2) solid-solid transition at 8.2 GPa. On the contrary, perfluoroheptane under goes three phase transitions, they are as follows: (1) liquid-solid transition at 1.3 GPa, (2) intermediate solid I transition at 3 GPa, (3) solid II transition at 7 GPa. The change in slope (d omega/dP) shows that the solid I transition at 3.0 GPa could be the conversion of mid-gauche defect into trans conformers for perfluoroheptane. The pressure induced Raman spectra and the behavior of individual band with pressure shows that the solid phase comprises more than one conformer beyond crystallization. The intensity ratio for both the compounds shows that the high pressure phase beyond 8.2 and 7.0 GPa tends to have close packing with distorted all-trans conformers. (C) 2015 Elsevier B.V. All rights reserved.

The impact of sand slugs against beams and plates: Coupled discrete particle/finite element simulations

The impact of a slug of dry sand particles against a metallic sandwich beam or circular sandwich plate is analysed in order to aid the design of sandwich panels for shock mitigation. The sand particles interact via a combined linear-spring-and-dashpot law whereas the face sheets and compressible core of the sandwich beam and plate are treated as rate-sensitive, elastic-plastic solids. The majority of the calculations are performed in two dimensions and entail the transverse impact of end-clamped monolithic and sandwich beams, with plane strain conditions imposed. The sand slug is of rectangular shape and comprises a random loose packing of identical, circular cylindrical particles. These calculations reveal that loading due to the sand is primarily inertial in nature with negligible fluid-structure interaction: the momentum transmitted to the beam is approximately equal to that of the incoming sand slug. For a slug of given incoming momentum, the dynamic deflection of the beam increases with decreasing duration of sand-loading until the impulsive limit is attained. Sandwich beams with thick, strong cores significantly outperform monolithic beams of equal areal mass. This performance enhancement is traced to the "sandwich effect" whereby the sandwich beams have a higher bending strength than that of the monolithic beams. Three-dimensional (3D) calculations are also performed such that the sand slug has the shape of a circular cylindrical column of finite height, and contains spherical sand particles. The 3D slug impacts a circular monolithic plate or sandwich plate and we show that sandwich plates with thick strong cores again outperform monolithic plates of equal areal mass. Finally, we demonstrate that impact by sand particles is equivalent to impact by a crushable foam projectile. The calculations on the equivalent projectile are significantly less intensive computationally, yet give predictions to within 5% of the full discrete particle calculations for the monolithic and sandwich beams and plates. These foam projectile calculations suggest that metallic foam projectiles can be used to simulate the loading by sand particles within a laboratory setting. © 2013 Elsevier Ltd.

Broken symmetry and pseudogaps in ropes of carbon nanotubes

Since the discovery of carbon nanotubes, it has been speculated that these materials should behave like nanoscale wires with unusual electronic properties and exceptional strength. Recently, 'ropes' of close-packed single-wall nanotubes have been synthesized in high yield. The tubes in these ropes are mainly of the (10,10) type3, which is predicted to be metallic. Experiments on individual nanotubes and ropes indicate that these systems indeed have transport properties that qualify them to be viewed as nanoscale quantum wires at low temperature. It has been expected that the close-packing of individual nanotubes into ropes does not change their electronic properties significantly. Here, however, we present first-principles calculations which show that a broken symmetry of the (10,10) tube caused by interactions between tubes in a rope induces a pseudogap of about 0.1 eV at the Fermi level. This pseudogap strongly modifies many of the fundamental electronic properties: we predict a semimetal-like temperature dependence of the electrical conductivity and a finite gap in the infrared absorption spectrum. The existence of both electron and hole charge carriers will lead to qualitatively different thermopower and Hall-effect behaviours from those expected for a normal metal.

Solid-state analysis of low-melting 1,3-dialkylimidazolium hexafluorophosphate salts (ionic liquids) by combined x-ray crystallographic and computational analyses

The interactions of ions in the solid state for a series of representative 1,3-dialkylimidazolium hexafluorophosphate salts (either ionic liquids or closely related) have been examined by crystallographic analysis, combined with the theoretical estimation of crystal-packing densities and lattice-interaction energies. Efficient close-packing of the ions in the crystalline states is observed, but there was no compelling evidence for specific directional hydrogen-bonding to the hexafluorophosphate anions or the formation of interstitial voids. The close-packing efficiency is supported by the theoretical calculation of ion volumes, crystal lattice energies, and packing densities, which correlated well with experimental data. The crystal density of the salts can be predicted accurately from the summation of free ion volumes and lattice energies calculated. Of even more importance for future work, on these and related salts, the solid-state density of 1,3-dialkylimidazolium hexafluorophosphate salts can be predicted with reasonable accuracy purely on the basis of on ab initio free ion volumes, and this allows prediction of lattice energies without necessarily requiring the crystal structures.

Tectonique moléculaire : vers l'utilisation du dispirofluorène-indénofluorène comme unité de construction pour bâtir des réseaux cristallins poreux

La chimie supramoléculaire est un domaine qui suscite depuis quelques années un intérêt grandissant. Le domaine s’appuie sur les interactions intermoléculaires de façon à contrôler l’organisation moléculaire et ainsi moduler les propriétés des matériaux. La sélection et le positionnement adéquat de groupes fonctionnels, utilisés en combinaison avec un squelette moléculaire particulier, permet d’anticiper la façon dont une molécule interagira avec les molécules avoisinantes. Cette stratégie de construction, nommé tectonique moléculaire, fait appel à la conception de molécules appelées tectons (du mot grec signifiant bâtisseur) pouvant s’orienter de façon prévisible par le biais d’interactions faibles et ainsi générer des architectures supramoléculaires inédites. Les tectons utilisent les forces intermoléculaires mises à leur disposition pour s’orienter de façon prédéterminée et ainsi contrecarrer la tendance à s’empiler de la manière la plus compacte possible. Pour ce faire, les tectons sont munies de diverses groupes fonctionnels, aussi appelés groupes de reconnaissance, qui agiront comme guide lors de l’assemblage moléculaire. Le choix du squelette moléculaire du tecton revêt une importance capitale puisqu’il doit permettre une orientation optimale des groupes de reconnaissance. La stratégie de la tectonique moléculaire, utilisée conjointement avec la cristallisation, ouvre la porte à un domaine de la chimie supramoléculaire appelé le génie cristallin. Le génie cristallin permet l’obtention de réseaux cristallins poreux soutenus par des interactions faibles, pouvant accueillir des molécules invitées. Bien que toutes les interactions faibles peuvent être mises à contribution, le pont hydrogène est l’interaction prédominante en ce qui a trait aux réseaux cristallins supramoléculaires. La force, la directionnalité ainsi que la versatilité font du pont hydrogène l’interaction qui, à ce jour, a eu le plus grand impact dans le domaine du génie cristallin. Un des groupements de reconnaissance particulièrement intéressants en génie cristallin, faisant appel aux ponts hydrogène et offrant plusieurs motifs d’interaction, est l’unité 2,4-diamino-1,3,5-triazinyle. L’utilisation de ce groupement de reconnaissance conjointement avec un cœur moléculaire en forme de croix d’Onsager, qui défavorise l’empilement compact, permet l’obtention de valeurs de porosités élevées, comme c’est le cas pour le 2,2’,7,7’-tétrakis(2,4-diamino-1,3,5-triazin-6-yl)-9,9’-spirobi[9H-fluorène]. Nous présentons ici une extension du travail effectué sur les cœurs spirobifluorényles en décrivant la synthèse et l’analyse structurale de molécules avec une unité dispirofluorène-indénofluorényle comme cœur moléculaire. Ce cœur moléculaire exhibe les mêmes caractéristiques structurales que le spirobifluorène, soit une topologie rigide en forme de croix d’Onsager défavorisant l’empilement compact. Nous avons combiné les cœurs dispirofluorène-indénofluorényles avec différents groupements de reconnaissance de façon à étudier l’influence de l’élongation du cœur moléculaire sur le réseau cristallin, en particulier sur le volume accessible aux molécules invitées.

De la modélisation à la quantification par ultrasons de l'agrégation érythrocytaire

Le travail a été réalisé en collaboration avec le laboratoire de mécanique acoustique de Marseille, France. Les simulations ont été menées avec les langages Matlab et C. Ce projet s'inscrit dans le champ de recherche dénommé caractérisation tissulaire par ultrasons.

Using phospholipid Langmuir and Langmuir-Blodgett films as matrix for urease immobilization

The immobilization of enzymes in organized two-dimensional matrices is a key requirement for many biotechnological applications. In this paper, we used the Langmuir-Blodgett (LB) technique to obtain controlled architectures of urease immobilized in solid supports, whose physicochemical properties were investigated in detail. Urease molecules were adsorbed at the air-water interface and incorporated into Langmuir monolayers of the phospholipid dipalmitoyl phosphatidyl glycerol (DPPG). Incorporation of urease made DPPG monolayers more flexible and caused the reduction of the equilibrium and dynamic elasticity of the film. Urease and DPPG-urease mixed monolayers could be transferred onto solid substrates, forming LB films. A close packing arrangement of urease was obtained, especially in the mixed LB films, which was inferred with nanogravimetry and electrochemistry measurements. From the blocking effect of the LB films deposited onto indium tin oxide (ITO) substrates, the electrochemical properties of the LB films pointed to a charge transport controlled by the lipid architecture. (c) 2007 Elsevier Inc. All rights reserved.

Estimating the diameter of yarns with irregular constituent fibres

Yarn diameter and packing density are difficult to measure directly. Existing models on fibre packing density in a yarn assume that all fibres are uniform and have an identical diameter. Yet real staple yarns, such as wool yarns, consist of fibres of varying diameters. This paper proposes an effective and simple yarn model for calculating the average diameter of yarns, in which fibres have circular cross-section and the close packing in the yarn cross-section. The concept of “area equivalent diameter” is introduced to transform fibres of varying diameters to identical fibres with one equivalent diameter to simplify the calculations of the average yarn diameter for a range of yarns.

Structural and optical properties of GdAlO3:RE3+ (RE = Eu or Tb) prepared by the Pechini method for application as X-ray phosphors

In this work, GdAlO3:RE3+ (RE = Eu or Tb) was successfully prepared by the Pechini method at lower temperatures when compared to others methods as solid-state synthesis and sol-gel process. In accordance to the XRD data, the fully crystalline single-phase GdAlO3 could be obtained at 900 degrees C. The differential thermal analysis (DTA) shows a crystallization peak at 850 degrees C. The samples are composed by monocrystalline particles (50-120 nm) exhibiting the formation of aggregates among them, which indicates the beginning of the sinterization process. This feature indicates a strong tendency to the formation of aggregates, which is a suitable ability for the close-packing of particles, and hence a potential application in X-ray intensifying screens. Luminescence measurements indicate Gd3+ -> RE3+ energy transfer. The Eu3+ emission spectra exhibit all the characteristics D-5(0) -> F-7(j) transitions and the observed profile suggests that RE3+ ions occupy at least one site without center of symmetry. For terbium-doped samples, the D-5(3) -> F-7(j) (blue emission) and D-5(4) -> F-7(j) (green emission) transitions were observed and the ratio between them may depend on the Tb3+ content due to cross-relaxation processes. (C) 2009 Elsevier B.V. All rights reserved.

Interpolyelektrolytkomplexe zylindrischer Bürstenpolymere

Die elektrostatische Wechselwirkung zwischen entgegengesetzt geladenen Polyelektrolyten führt zur spontanen Bildung von Interpolyelektrolytkomplexen. Besonders im Fokus des akademischen und biotechnologischen Interesses stehen derzeit Komplexe aus DNA und synthetischen Polykationen, da eine Anwendung dieser speziellen Interpolyelektrolytkomplexe in der nicht-viralen Gentherapie vielfältig diskutiert wird. Ziel der vorliegenden Arbeit war es, den Einfluss von Kettensteifheit auf die Bildung von Interpolyelektrolytkomplexen zu untersuchen und dabei Wege aufzuzeigen, die eine Kontrolle der Topologie von Interpolyelektrolytkomplexen ermöglichen. Neben dem topologischen Einfluss wurde untersucht, wie durch Komplexierung hochmolekularer Polyelektrolyte equilibrierbare Strukturen erhalten werden können. Als Modellsystem für diese Untersuchungen wurden zylindrische Bürstenpolymere verwendet, denen als topologischer „Kontrast“ das Komplexierungsverhalten kommerzieller PAMAM-G5-Dendrimere mit kugelförmiger Topologie gegenüber gestellt wurde. Um den Ladungsgrad des Bürstenpolymers beliebig variieren zu können, wurden Bürstenpolymere mit Poly(ethylenimin)-Seitenketten synthetisiert, deren Ladungsdichte über den Protonierungsgrad einstellbar ist. Die vorliegende Arbeit zeigt, wie diese mit Hilfe der Makromonomermethode hergestellt werden konnten. Die Komplexbildung von DNA mit semiflexiblen zylindrischen Bürstenpolymeren mit unterschiedlichen Seitenketten und Ladungsdichten in wässriger Lösung hat gezeigt, dass diese in allen untersuchten Fällen unter kinetischer Kontrolle verläuft und Nicht-Gleichgewichtsstrukturen gebildet werden. Sehr überraschend wurde festgestellt, dass die Größen der mit vorgelegter DNA gebildeten Komplexe ungeachtet des verwendeten Polykations identisch sind und DNA-Komplexe mit einem Radius von 30 bis 50 nm und einer kugelförmigen Topologie resultieren. Diese kinetisch kontrollierte Komplexbildung konnte in nicht-wässriger Lösung durch starke Reduktion der Anzahl wechselwirkender Ladungen verhindert werden, so dass eine thermodynamische Kontrolle möglich wurde. Unter diesen Bedingungen ist es gelungen, aus hochgeladenen Poly(styrolsulfonat)-Bürsten mit modifizierten Poly(ethylenimin)-Bürsten oder PAMAM-Dendrimeren Komplexe zylindrischer Topologie herzu-stellen. Für letztere konnte darüber hinaus postuliert werden, dass diese Komplexe eine dichteste Packung der PAMAM-Dendrimere darstellen, für deren Bildung das Polyanion mit seiner größeren Konturlänge und seiner zylindrischen Topologie als Templat dient.

Kyzylkumite, Ti2V3+O5(OH): new structure type, modularity and revised formula

The crystal structure of kyzylkumite, ideally Ti2V3+O5(OH), from the Sludyanka complex in South Baikal, Russia was solved and refined (including the hydrogen atom position) to an agreement index, R1, of 2.34 using X-ray diffraction data collected on a twinned crystal. Kyzylkumite crystallizes in space group P21/c, with a = 8.4787(1), b = 4.5624(1), c = 10.0330(1) Å, β = 93.174(1)°, V = 387.51(1) Å3 and Z = 4. Tivanite, TiV3+O3OH, and kyzylkumite have modular structures based on hexagonal close packing of oxygen, which are made up of rutile TiO2 and montroseite V3+O(OH) slices. In tivanite the rutile:montroseite ratio is 1:1, in kyzylkumite the ratio is 2:1. The montroseite module may be replaced by the isotypic paramontroseite V4+O2 module, which produces a phase with the formula Ti2V4+O6. In the metamorphic rocks of the Sludyanka complex, vanadium can be present as V4+ and V3+ within the same mineral (e.g. in batisivite, schreyerite and berdesinskiite). Kyzylkumite has a flexible composition with respect to the M4+/M3+ ratio. The relationship between kyzylkumite and a closely related Be-bearing kyzylkumite-like mineral with an orthorhombic norbergite-type structure from Byrud mine, Norway is discussed. Both minerals have similar X-ray powder diffraction patterns.

Reflectionless potentials for slow whispering gallery modes in surface nanoscale axial photonic fiber resonators

We consider an optical fiber with a nanoscale variation of the effective fiber radius that supports whispering gallery modes slowly propagating along the fiber, and reveal that the radius variation can be designed to support the reflectionless propagation of these modes. We show that reflectionless modulations can realize control of the transmission amplitude and temporal delay, while enabling close packing due to the absence of cross talk, in contrast to the conventional potentials.