Organizational/field/intermediate/DS, GS, and depot maintenance with illustrated parts breakdown : control, transponder set, C-6280(P)/APX, C-6280A(P)/APX, C-6717/APX, & C-7483/APX : Admiral aircraft radio.

"1 November 1969."

Organizational maintenance repair parts and special tools list for control radio channel C-10931(P)/FRC (NSN 5820-01-1141-1456).

"3 September 1982."

Operator's and organizational maintenance manual : control, radio channel C-10931(P)/FRC (NSN 5820-01-114-1456).

"July 1982."

Radio - Studio - Old - Equipment - Transmitter and Control Room - Radio History - First Broadcast from a Commercial Station - Early WWJ [Detroit News]

Keith Bemand, Elton Plank, Mr. Trumbull

Distributed power control algorithm for multiple access systems based on Verhulst model

In this paper the continuous Verhulst dynamic model is used to synthesize a new distributed power control algorithm (DPCA) for use in direct sequence code division multiple access (DS-CDMA) systems. The Verhulst model was initially designed to describe the population growth of biological species under food and physical space restrictions. The discretization of the corresponding differential equation is accomplished via the Euler numeric integration (ENI) method. Analytical convergence conditions for the proposed DPCA are also established. Several properties of the proposed recursive algorithm, such as Euclidean distance from optimum vector after convergence, convergence speed, normalized mean squared error (NSE), average power consumption per user, performance under dynamics channels, and implementation complexity aspects, are analyzed through simulations. The simulation results are compared with two other DPCAs: the classic algorithm derived by Foschini and Miljanic and the sigmoidal of Uykan and Koivo. Under estimated errors conditions, the proposed DPCA exhibits smaller discrepancy from the optimum power vector solution and better convergence (under fixed and adaptive convergence factor) than the classic and sigmoidal DPCAs. (C) 2010 Elsevier GmbH. All rights reserved.

Polymerization of diglycidyl ether of bisphenol A/diaminodiphenyl sulfone epoxy resins using radio frequency fields

Curing of diglycidyl ether of bisphenol A/diaminodiphenyl sulfone (DGEBA/DDS) epoxy resin has been effected by heating with radio frequency (RF) radiation at frequencies of 30-99 MHz. The epoxy resins can be cured rapidly at low RF power levels. Comparison of the kinetics of the RF curing with thermal curing while maintaining the same curing temperature revealed no differences. Previous differences in rates of thermal and microwave curing are believed to be due to lack of temperature control during microwave curing. For RF curing,the rate of cure, at constant power level, increases at lower RF frequency, thus emphasizing one of the principal advantages of RF curing over microwave curing. (C) 1999 John Wiley & Sons, Inc.

RFID together with multi-agent systems to control global value chains

Nowadays, the cooperative intelligent transport systems are part of a largest system. Transportations are modal operations integrated in logistics and, logistics is the main process of the supply chain management. The supply chain strategic management as a simultaneous local and global value chain is a collaborative/cooperative organization of stakeholders, many times in co-opetition, to perform a service to the customers respecting the time, place, price and quality levels. The transportation, like other logistics operations must add value, which is achieved in this case through compression lead times and order fulfillments. The complex supplier's network and the distribution channels must be efficient and the integral visibility (monitoring and tracing) of supply chain is a significant source of competitive advantage. Nowadays, the competition is not discussed between companies but among supply chains. This paper aims to evidence the current and emerging manufacturing and logistics system challenges as a new field of opportunities for the automation and control systems research community. Furthermore, the paper forecasts the use of radio frequency identification (RFID) technologies integrated into an information and communication technologies (ICT) framework based on distributed artificial intelligence (DAI) supported by a multi-agent system (MAS), as the most value advantage of supply chain management (SCM) in a cooperative intelligent logistics systems. Logistical platforms (production or distribution) as nodes of added value of supplying and distribution networks are proposed as critical points of the visibility of the inventory, where these technological needs are more evident.

Aplicación de redes de datos inalámbricas al control del medio ambiente que afecta aspectos fisiológicos y productivos de cultivos ornamentales

Este proyecto interdisciplinario consiste en la implementación y aplicación de una red inalámbrica sobre el manejo intensivo del medio-ambiente en cultivos ornamentales. La especie elegida para la puesta a punto de la técnica es el Lilium spp. La red inalámbrica para la transmisión de datos digitales se instalará en un ambiente de invernadero automatizado donde dispositivos inalámbricos se integrarán en una red inteligente para la transmisión de datos por radio frecuencia. Además se podrá vizualizar por Internet. Con el proyecto se pretende el estudio y caracterización del ambiente para una posterior actuación sobre el mismo. Con esto se espera dar respuesta a la influencia sobre la fisiología de la floración en un esquema de producción eficiente de cultivos ornamentales (para flor de corte y/o cultivo en maceta) en nuestra provincia de Córdoba, con la transferencia tecnológica correspondiente al sector productivo.

Dispositivo de transmisión de datos por radio frecuencia

El proyecto comprende el diseño, implementación, medición y evaluación de un dispositivo de comunicaciones digitales inalámbrica. Este dispositivo podrá ser utilizado como soporte de distintas aplicaciones, como automatización de viviendas, automatización de edificios inteligentes, control y seguimiento de vehículos, control y monitoreo de animales, instrumental médico y otras. La construcción de un transmisor y un receptor de datos por radiofrecuencia, en un único circuito integrado, plantea distintas etapas y para concretarlas se trazaron los siguientes objetivos: • Diseño, implementación y medición de circuitos de transmisión de datos con integrados existentes. • Estudio de las tecnologías y software disponibles para el diseño de los circuitos que constituyen el proyecto. Diseño, simulación, implementación y medición de circuitos realizados con dispositivos discretos.

Aplicación de redes de datos inalámbricas al control del medio ambiente de invernadero para el manejo de variables productivas en cultivos ornamentales.

Este proyecto interdisciplinario consiste en la implementación y aplicación de una red inalámbrica sobre el manejo intensivo del medio-ambiente en cultivos ornamentales. Las especies elegidas para dicha implementación y aplicación son: Lilium spp. y Solidago spp. La red inalámbrica para la transmisión de datos digitales se instalará en un ambiente de invernadero automatizado donde dispositivos inalámbricos se integrarán en una red inteligente para la transmisión de datos por radio frecuencia. Además se podrá vizualizar por Internet. Con el proyecto se pretende el estudio y caracterización del ambiente para una posterior actuación sobre el mismo. Con esto se espera dar respuestas al comportamiento de los cultivos ornamentales frente a parámetros ambientales en un esquema de producción eficiente. Los resultados obtenidos, en el medio ambiente del centro de nuestra provincia de Córdoba, tendrá la transferencia tecnológica correspondiente al sector productivo.

Sistema inalámbrico de control de iluminación

L’objectiu principal del projecte és dissenyar un sistema de control automàtic de il·luminació en un recinte tancat, mitjançant la detecció de presència d’una persona que entra dins del radi d’actuació del sistema. Utilitzant dues plaques amb capacitat de comunicació inalàmbrica es controlaran dos components, un sensor i un actuador. El sensor té la funció de detectar la presència d’una persona per mitjà d’infraroigs, mentre que l’actuador ens proporciona la funcionalitat d’un interruptor amb el qual pogué actuar sobre la llum, encenent-la o apagant-la en funció de l’estat de detecció.

Relay-assisted transmission and radio resource management for wireless networks

The following paper presents an overview of the Ph.D Thesis1 presented in [1], which compiles all the research done during the period of time between 2004-2007. In that dissertation the relay-assisted transmission with half-duplex relays is analyzed from different points of view. This study is motivated by the necessity of finding innovative solutions to cope with the requirements of next generation wireless services, and with current radio technology. The use of relayed communications represents a change of paradigm of conventional communications, and requires the definition and evaluation of protocols to be applied to single or multiple-user relay communication. With the two fold goal of enhancing spectral efficiency and homogenize service in cellular communications, system design is investigated at physical (type of transmissions of the relay, decoding mode, ..) and upper layers (resource allocation, dynamic link control).

Radio-frequency ablation as primary management of well-tolerated sustained monomorphic ventricular tachycardia in patients with structural heart disease and left ventricular ejection fraction over 30%.

AIMS: Patients with well-tolerated sustained monomorphic ventricular tachycardia (SMVT) and left ventricular ejection fraction (LVEF) over 30% may benefit from a primary strategy of VT ablation without immediate need for a 'back-up' implantable cardioverter-defibrillator (ICD). METHODS AND RESULTS: One hundred and sixty-six patients with structural heart disease (SHD), LVEF over 30%, and well-tolerated SMVT (no syncope) underwent primary radiofrequency ablation without ICD implantation at eight European centres. There were 139 men (84%) with mean age 62 ± 15 years and mean LVEF of 50 ± 10%. Fifty-five percent had ischaemic heart disease, 19% non-ischaemic cardiomyopathy, and 12% arrhythmogenic right ventricular cardiomyopathy. Three hundred seventy-eight similar patients were implanted with an ICD during the same period and serve as a control group. All-cause mortality was 12% (20 patients) over a mean follow-up of 32 ± 27 months. Eight patients (40%) died from non-cardiovascular causes, 8 (40%) died from non-arrhythmic cardiovascular causes, and 4 (20%) died suddenly (SD) (2.4% of the population). All-cause mortality in the control group was 12%. Twenty-seven patients (16%) had a non-fatal recurrence at a median time of 5 months, while 20 patients (12%) required an ICD, of whom 4 died (20%). CONCLUSION: Patients with well-tolerated SMVT, SHD, and LVEF > 30% undergoing primary VT ablation without a back-up ICD had a very low rate of arrhythmic death and recurrences were generally non-fatal. These data would support a randomized clinical trial comparing this approach with others incorporating implantation of an ICD as a primary strategy.

RFID per al control de vehicles en àrees de trànsit restringit

En aquest projecte s'ha dissenyat un sistema informàtic per controlar els esdeveniments produïts per vehicles en zones de trànsit restringit i zones de càrrega i descàrrega. La tecnologia utilitzada és RFID (Radio Frequency Identification Vehicles). Pel que fa al maquinari del projecte, s'ha desenvolupat un sistema a partir d'una placa amb un microcontrolador. Amb aquesta placa es simulen els esdeveniments i s'envien a una màquina amb estructura PC via port Sèrie. Finalment, aquesta màquina processa els esdeveniments rebuts, i els envia a través de la xarxa Ethernet a un servidor central. Pel que fa al programari del projecte, s'ha dissenyat una aplicació web amb llenguatge PHP que processarà les dades rebudes des de la màquina via Ethernet. Un cop l'aplicació rep les dades dels esdeveniments, aquesta s'encarrega d'introduir-les a la base de dades, de manera que aquesta es mantingui actualitzada en tot moment. A més, aquesta aplicació ha de permetre consultar totes les dades sobre els esdeveniments produïts, de manera que es guardi un historial d'aquests