Towed vehicles: undulating platforms as tools for maping coastal processes and water quality assessment, Seaside, California, February 5-7,2007. Workshop proceedings

The Alliance for Coastal Technologies (ACT) Workshop on Towed Vehicles: Undulating Platforms As Tools for Mapping Coastal Processes and Water Quality Assessment was convened February 5-7,2007 at The Embassy Suites Hotel, Seaside, California and sponsored by the ACT-Pacific Coast partnership at the Moss Landing Marine Laboratories (MLML). The TUV workshop was co-chaired by Richard Burt (Chelsea Technology Group) and Stewart Lamerdin (MLML Marine Operations). Invited participants were selected to provide a uniform representation of the academic researchers, private sector product developers, and existing and potential data product users from the resource management community to enable development of broad consensus opinions on the application of TUV platforms in coastal resource assessment and management. The workshop was organized to address recognized limitations of point-based monitoring programs, which, while providing valuable data, are incapable of describing the spatial heterogeneity and the extent of features distributed in the bulk solution. This is particularly true as surveys approach the coastal zone where tidal and estuarine influences result in spatially and temporally heterogeneous water masses and entrained biological components. Aerial or satellite based remote sensing can provide an assessment of the aerial extent of plumes and blooms, yet provide no information regarding the third dimension of these features. Towed vehicles offer a cost-effective solution to this problem by providing platforms, which can sample in the horizontal, vertical, and time-based domains. Towed undulating vehicles (henceforth TUVs) represent useful platforms for event-response characterization. This workshop reviewed the current status of towed vehicle technology focusing on limitations of depth, data telemetry, instrument power demands, and ship requirements in an attempt to identify means to incorporate such technology more routinely in monitoring and event-response programs. Specifically, the participants were charged to address the following: (1) Summarize the state of the art in TUV technologies; (2) Identify how TUV platforms are used and how they can assist coastal managers in fulfilling their regulatory and management responsibilities; (3) Identify barriers and challenges to the application of TUV technologies in management and research activities, and (4) Recommend a series of community actions to overcome identified barriers and challenges. A series of plenary presentation were provided to enhance subsequent breakout discussions by the participants. Dave Nelson (University of Rhode Island) provided extensive summaries and real-world assessment of the operational features of a variety of TUV platforms available in the UNOLs scientific fleet. Dr. Burke Hales (Oregon State University) described the modification of TUV to provide a novel sampling platform for high resolution mapping of chemical distributions in near real time. Dr. Sonia Batten (Sir Alister Hardy Foundation for Ocean Sciences) provided an overview on the deployment of specialized towed vehicles equipped with rugged continuous plankton recorders on ships of opportunity to obtain long-term, basin wide surveys of zooplankton community structure, enhancing our understanding of trends in secondary production in the upper ocean. [PDF contains 32 pages]

Description of sampling stations, methods of benthic sampling and biological water quality assessment; with some consideration of the influence of sample variation on the assessment values obtained

The first bilateral study of methods of biological sampling and biological methods of water quality assessment took place during June 1977 on selected sampling sites in the catchment of the River Trent (UK). The study was arranged in accordance with the protocol established by the joint working group responsible for the Anglo-Soviet Environmental Agreement. The main purpose of the bilateral study in Nottingham was for some of the methods of sampling and biological assessment used by UK biologists to be demonstrated to their Soviet counterparts and for the Soviet biologists to have the opportunity to test these methods at first hand in order to judge the potential of any of these methods for use within the Soviet Union. This paper is concerned with the nine river stations in the Trent catchment.

Metallothionein as an indicator of water quality: assessment of the bioavailability of cadmium, copper, mercury and zinc in aquatic animals at the cellular level

The study of metallothioneins (MTs) has greatly improved our understanding of body burdens, metal storage and detoxification in aquatic organisms subjected to contamination by the toxic heavy metals, Cd, Cu, Hg and Zn. These studies have shown that in certain organisms MT status can be used to assess impact of these metals at the cellular level and, whilst validation is currently limited to a few examples, this stress response may be linked to higher levels of organisation, thus indicating its potential for environmental quality assessment. Molluscs, such as Mytilus spp., and several commonly occurring teleost species, are the most promising of the indicator species tested. Natural variability of MT levels caused by the organism's size, condition, age, position in the sexual cycle, temperature and various stressors, can lead to difficulties in interpretation of field data as a definitive response-indicator of metal contamination unless a critical appraisal of these variables is available. From laboratory and field studies these data are almost complete for teleost fish. Whilst for molluscs much of this information is lacking, when suitable controls are utilised and MT measurements are combined with observations of metal partitioning, current studies indicate that they are nevertheless a powerful tool in the interpretation of impact, and may prove useful in water quality assessment.

A baseline fish survey and water quality assessment of Butiaba-Wanseko area on Lake Albert

This report gives the baseline information specifically on water quality (physical/chemical, nutrient and phytoplankton biomass status) of the open part of the lake, a river flowing into the lake and a lagoon, within Butiaba-Wanseko area. Oil and gas exploration in the Albertine Graben are on-going activities by Tullow Oil Plc, and Heritage Oil and Gas (Heritage). Part of the activities involve 2-D TZ seismic surveys in exploration area Block 2 (Butiaba-Wanseko area) in Buliisa District. A study of the transition zone (basically along the shoreline was undertaken by National Fisheries Resources Research Institute (NaFIRRI) on behalf of Environmental Assessment Consult Ltd (EACL) during September 2007. A major objective of the study was to carry out a baseline survey of the fisheries and water quality of the lake shore between Wanseko and Butiaba prior to the proposed 2-D Seisimic investigation.

Quality assessment of rotating and solar tunnel dried marine fish product

Studies were conducted to evaluate the quality aspects of marine dried fish i.e. silver jew fish (Johnius argentatus), Bombay duck (Harpodon nehereus) and ribbon fish (Trichiums haumela) products produced in rotating and solar tunnel dryers. On the basis of organoleptic characteristics such as colour, odour, texture, broken pieces, insect infestation and overall quality, four member panels of experts evaluated the quality of the dried products obtained from both rotating and solar tunnel dryers and all the products were found in acceptable quality. Reconstitutions properties of samples were in the range of 51.05 to 98.75% for the dried fish produced in rotating dryer, while 24.64 to 76.76% for dried fish produced in solar tunnel dryer. The highest reconstitution rate was found in dried silver jew fish and lowest in ribbon fish produced in rotating dryer. On the other hand, the highest reconstitution was observed in dried silver jew fish and lowest in dried Bombay duck produced in solar tunnel dryer. Proximate composition such as moisture, crude protein, lipid and ash content of the dried fish muscles produced in rotating dryer ranged from 16.36% to 19.1%, 62.35% to 67.37%, 6.37% to 10.75% and 7.00% to 8.05%, respectively and in solar tunnel dried fish products, they were in the range of 14.05% to 19.71%,57.64% to 69. 21%,6.92% to 15.40%and 7.69% to 8.80 %, respectively. The TVBN values of dried fish products obtained from rotating dryer were in the range of 15.02 to 19.05 mg/100g, while in solar tunnel dried fish products, the values were in the range of 15.46 to 19.21 mg/100g. The results of the studies indicated that dried fish produced from both rotating and solar tunnel drier were acceptable quality in terms of organoleptic and food quality aspects.

Quality assessment of traditional and solar tunnel dried SIS (Small Indigenous Fish Species) products

Studies were conducted to assessment the quality of traditional and solar tunnel dried SIS products. The moisture content of the solar products ranged from 14.38 to 18.48% with the lowest in batashi and the highest value in tengra. The moisture content of the traditional products was in the range of 23.26 to 26.42%. The range of protein contents on moisture free basis was from 67.57 to 71.90% in solar dried fishes with highest value obtained in dhela and lowest value in batashi. These values were more or less similar to those of traditional dried SIS products which were in the range of 68.02 to 73.54% on dry weight basis. Lipid contents of solar dried SIS varied from 14.10 to 16.26% and on moisture free basis the in the range of 11.73 to 21.98 with highest value found in tengra and lowest in puti. These values were more or less similar to those found for traditional dried products on dry weight basis and ranged from were 12.37 to 22.43%. Maximum reconstitution of solar dried products was obtained at 80°C in all samples and was in the range of 65.26 to 70.51% where the percentage of reconstitution increases with the increase of socking time and reach maximum at the end of up to 60 min. The TVB-N content of solar dried fish is low compared with traditional one ranging from 20.30 to 28.40mg/100g and peroxide value in the range of 12. 54 to 19.20meq./kg oil. The TVB-N of traditionally dried products were in the range of 32.50 to 45.45mg/100g and PO values of the traditionally dried products were in the range of 30.00 to 36.00meq./kg oil. The bacterial load of the solar dried products was in the range of 4.0x10 super(3)/g to 3.6x10 super(5)CFU/g and of the traditionally dried products ranged from 1.45x10 super(5) to 2.52x10 super(6) CFU/g.

Quality assessment of traditional, rotary and solar tunnel dried small indigenous fish species products

Studies on the quality assessments of three traditional, rotary and solar tunnel dried SIS products were conducted. Organoleptic quality of traditional dried SIS products available in the markets was poor compared to those produced in rotary and solar tunnel dryer. Reconstitution of samples were in the range of 54.26% to 75.24%, 69.37% to 83.73% and 55.08% to 80.24% when soaked at 80°C for traditional, rotary and solar tunnel dried products, respectively. The percentage of reconstitution increased with the increase of soaking time and the uptake of water was maximum after 60 min of soaking. The moisture contents of traditional, rotary and solar tunnel dried products were in the range of 26.02% to 27.33%, 16.23% to 22.84% and 13.71% to 19.30%, respectively. The protein contents were in the range of 60.78% to 72.59%, 62.17% to 76.27% and 61.11% to 76.00%, respectively; lipid contents were in the range of 12.26% to 22.60%, 14.00% to 24.71% and 13.92% to 22.39%, respectively and ash contents in the range of 15.11% to 16.59%, 8.32% to 13.51% and 8.71% to 16.45%, respectively on dry matter basis. The TVB-N content of rotary and solar tunnel dried products was low compared to traditional one ranging from 10.64 to 17.52 mg/100g and 14.34 to 15.68 mg/100g, respectively whereas the TVB-N content of traditional samples was in the range of 15.46 to 20.36 mg/100g. The bacterial load of traditional, rotary and solar tunnel dried products were in the range of 1.43x10 super(8) CFU/g to 2.89 x10 super(80 CFU/g, 1.91x10 super(8) CFU/g to 2.84x10 super(8) CFU/g and 1.95x10 super(8) CFU/g to 2.59x10 super(8) CFU/g, respectively. The results of the study indicated that dried fish products from rotary dryer and solar tunnel dryer were found to be of better quality in nutritional and food quality aspects than those of traditional dried products.

Production and quality assessment of fish pickles from mola (Amblypharyngodon mola) fish

Fish pickles (with olive and tamarind) were prepared from mola fish (Amblypharyngodon mola) and their nutritional and food quality were assessed. The quality of the pickle prepared with olive was excellent and the pickle prepared with tamarind was found good. Moisture content of the two pickle products were 43.85% (with tamarind) and 50.89% (with olive). The protein and lipid contents of tamarind added pickle were 19.13 and 35.64% respectively; pickle with olive contained less protein (13.16%) compared to tamarind added mola pickle. Lipid contents were almost same in both cases. Ash content of two pickles was also found similar (1.00%). The quality of mola pickles stored either in cool condition (4°C) with vinegar or at room temperature with Na-benzoate were found good for consumption up to 90 days of storage. All of the fish pickles preserved under different condition were found in acceptable condition up to 240 days storage and pickle with vinegar stored at 4°C was found good for consumption at the end of 240 days.

Water quality assessment of Sonbolrood River by using hylsenhof index

This research investigates the quality of sonbolrood river by using Hylsenhof HFBI indicators and identified Macroinvertebrates invertebrates community in the family level. This study took place during 1388-1389 with four sampling season in four stations respectively in the forests of Kalyj kheyl village in Savadkuh (first station), industrial area of Islamabad (second Station), earth dam of Sonbolrood (third station) and the Place crosses Sonbolrood with Babolrood river (fourth Station). Macroinvertebrates invertebrates collected by quantitative sampler of Sorbr and they were isolated in laboratory by loop and they were identified in the family level. Generally, Macroinvertebrates of Sonbolrood river were formed three branches: Arthropods and flat worms and mollusks, including 3 tiers, 6 orders and 14 families that showed the maximum diversity and density in autumn and the least diversity and density in summer at all stations, also the third and fourth stations respectively were highest and lowest diversity and density. The water quality of Sonbolrood river based on the water quality Guide(Hylsenhof) is evaluated with excellent condition for all stations except third station. Sonbolrood river with having high slope, rocky and sandy bed, with self-refining act, completely is a proper ecosystem for aquatic organisms, but it is done due to increased organic matter and sewage factory located in industrial zone in the third station and then the increased water pollution caused by nurturing the water warm fish in the earth dam of Sonbolrood. (because of this, the water quality at third station based on the water quality Guide(Hylsenhof) are evaluated in a fairly good condition) and adding domestic sewages of adjacent villages like Seyedkola village and Shirdarkola caused increased pollution and increased trophy of Macroinvertebrates that are resistant to pollution and affect upon Macroinvertebrates community.

Machine vision based concrete surface quality assessment

Manually inspecting concrete surface defects (e.g., cracks and air pockets) is not always reliable. Also, it is labor-intensive. In order to overcome these limitations, automated inspection using image processing techniques was proposed. However, the current work can only detect defects in an image without the ability of evaluating them. This paper presents a novel approach for automatically assessing the impact of two common surface defects (i.e., air pockets and discoloration). These two defects are first located using the developed detection methods. Their attributes, such as the number of air pockets and the area of discoloration regions, are then retrieved to calculate defects’ visual impact ratios (VIRs). The appropriate threshold values for these VIRs are selected through a manual rating survey. This way, for a given concrete surface image, its quality in terms of air pockets and discoloration can be automatically measured by judging whether their VIRs are below the threshold values or not. The method presented in this paper was implemented in C++ and a database of concrete surface images was tested to validate its performance. Read More: http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29CO.1943-7862.0000126?journalCode=jcemd4

Detecting air pockets for architectural concrete quality assessment using visual sensing

Air pockets, one kind of concrete surface defects, are often created on formed concrete surfaces during concrete construction. Their existence undermines the desired appearance and visual uniformity of architectural concrete. Therefore, measuring the impact of air pockets on the concrete surface in the form of air pockets is vital in assessing the quality of architectural concrete. Traditionally, such measurements are mainly based on in-situ manual inspections, the results of which are subjective and heavily dependent on the inspectors’ own criteria and experience. Often, inspectors may make different assessments even when inspecting the same concrete surface. In addition, the need for experienced inspectors costs owners or general contractors more in inspection fees. To alleviate these problems, this paper presents a methodology that can measure air pockets quantitatively and automatically. In order to achieve this goal, a high contrast, scaled image of a concrete surface is acquired from a fixed distance range and then a spot filter is used to accurately detect air pockets with the help of an image pyramid. The properties of air pockets (the number, the size, and the occupation area of air pockets) are subsequently calculated. These properties are used to quantify the impact of air pockets on the architectural concrete surface. The methodology is implemented in a C++ based prototype and tested on a database of concrete surface images. Comparisons with manual tests validated its measuring accuracy. As a result, the methodology presented in this paper can increase the reliability of concrete surface quality assessment

A classification of data quality assessment methods

Data quality (DQ) assessment can be significantly enhanced with the use of the right DQ assessment methods, which provide automated solutions to assess DQ. The range of DQ assessment methods is very broad: from data profiling and semantic profiling to data matching and data validation. This paper gives an overview of current methods for DQ assessment and classifies the DQ assessment methods into an existing taxonomy of DQ problems. Specific examples of the placement of each DQ method in the taxonomy are provided and illustrate why the method is relevant to the particular taxonomy position. The gaps in the taxonomy, where no current DQ methods exist, show where new methods are required and can guide future research and DQ tool development.

A Video Quality Assessment Metric Based on Human Visual System

It is important for practical application to design an effective and efficient metric for video quality. The most reliable way is by subjective evaluation. Thus, to design an objective metric by simulating human visual system (HVS) is quite reasonable and available. In this paper, the video quality assessment metric based on visual perception is proposed. Three-dimensional wavelet is utilized to decompose video and then extract features to mimic the multichannel structure of HVS. Spatio-temporal contrast sensitivity function (S-T CSF) is employed to weight coefficient obtained by three-dimensional wavelet to simulate nonlinearity feature of the human eyes. Perceptual threshold is exploited to obtain visual sensitive coefficients after S-T CSF filtered. Visual sensitive coefficients are normalized representation and then visual sensitive errors are calculated between reference and distorted video. Finally, temporal perceptual mechanism is applied to count values of video quality for reducing computational cost. Experimental results prove the proposed method outperforms the most existing methods and is comparable to LHS and PVQM.