48.8 km Ultralong Erbium fiber laser in active mode-locking operation

By the use of installed fibers inside the city we demonstrated a 48.8 km ultralong Erbium-doped fiber laser in modelocking regime with repetition rate varying from 1-10 GHz. The shortest pulse duration of 42 ps at 2.5 GHz was obtained by optimization of intracavity dispersion.

A Study on the Relationship of Embedded Sensitivity With Measuring Grid and Mode Shapes

Embedded sensitivity analysis has proven to be a useful tool in finding optimum positions of structure reinforcements. However, it was not clear how sensitivities obtained from the embedded sensitivity method were related to the normal mode, or operational mode, associated to the frequency of interest. In this work, this relationship is studied based on a finite element of a slender sheet metal piece, with preponderant bending modes. It is shown that higher sensitivities always occur at nodes or antinodes of the vibrating system. [DOI: 10.1115/1.4002127]

Coupled reliability and boundary element model for probabilistic fatigue life assessment in mixed mode crack propagation

Fatigue and crack propagation are phenomena affected by high uncertainties, where deterministic methods fail to predict accurately the structural life. The present work aims at coupling reliability analysis with boundary element method. The latter has been recognized as an accurate and efficient numerical technique to deal with mixed mode propagation, which is very interesting for reliability analysis. The coupled procedure allows us to consider uncertainties during the crack growth process. In addition, it computes the probability of fatigue failure for complex structural geometry and loading. Two coupling procedures are considered: direct coupling of reliability and mechanical solvers and indirect coupling by the response surface method. Numerical applications show the performance of the proposed models in lifetime assessment under uncertainties, where the direct method has shown faster convergence than response surface method. (C) 2010 Elsevier Ltd. All rights reserved.

Feasibility of a Sequencing Reactor Operated in Batch and Fed-batch Mode Applied to Nitrification and Denitrification Processes

The objective of this work was to study the operational feasibility of nitrification and denitrification processes in a mechanically stirred sequencing batch reactor (SBR) operated in batch and fed-batch mode. The reactor was equipped with a draft-tube to improve mass transfer and contained dispersed (aerobic) and granulated (anaerobic) biomass. The following reactor variables were adjusted: aeration time during the nitrification step; dissolved oxygen concentration, feed time defining batch and fed-batch phases, concentration of external carbon source used as electron donor during the denitrification stage and volumetric ammonium nitrogen load in the influent. The reactor (5 L volume) was maintained at 30 +/- 1 degrees C and treated either 1.0 or 1.5 L wastewater in 8-h cycles. Ammonium nitrogen concentrations assessed were: 50 (condition 1) and 100 mgN-NH(4)(+).L(-1) (condition 2), resulting in 29 and 67 mgN-NH(4)(+).L-1-d(-1), respectively. A synthetic medium and ethanol were used as external carbon sources (ECS). Total nitrogen removal efficiencies were 94.4 and 95.9% when the reactor was operated under conditions 1 and 2, respectively. Low nitrite (0.2 and 0.3 mgN-NO(2)(-).L(-1), respectively) and nitrate (0.01 and 0.3 mgN-NO(3)(-).L(-1), respectively) concentrations were detected in the effluent and ammonium nitrogen removal efficiencies were 97.6% and 99.6% under conditions 1 and 2, respectively.

Tailoring vibration mode shapes using topology optimization and functionally graded material concepts

Tailoring specified vibration modes is a requirement for designing piezoelectric devices aimed at dynamic-type applications. A technique for designing the shape of specified vibration modes is the topology optimization method (TOM) which finds an optimum material distribution inside a design domain to obtain a structure that vibrates according to specified eigenfrequencies and eigenmodes. Nevertheless, when the TOM is applied to dynamic problems, the well-known grayscale or intermediate material problem arises which can invalidate the post-processing of the optimal result. Thus, a more natural way for solving dynamic problems using TOM is to allow intermediate material values. This idea leads to the functionally graded material (FGM) concept. In fact, FGMs are materials whose properties and microstructure continuously change along a specific direction. Therefore, in this paper, an approach is presented for tailoring user-defined vibration modes, by applying the TOM and FGM concepts to design functionally graded piezoelectric transducers (FGPT) and non-piezoelectric structures (functionally graded structures-FGS) in order to achieve maximum and/or minimum vibration amplitudes at certain points of the structure, by simultaneously finding the topology and material gradation function. The optimization problem is solved by using sequential linear programming. Two-dimensional results are presented to illustrate the method.

A TRIPLE-MODE BANDPASS FILTER USING A MODIFIED CIRCULAR PATCH RESONATOR

This article presents a triple-mode bandpass filter using a modified circular patch resonator. Etched slots in the resonator split the TM(1, 1, 0)(z) degenerate fundamental modes and also perturb the TM(2, 1, 0)(z) mode, approximating their resonant frequencies to form a third-order bandpass filter. A 2.42 GHz centered filter was designed and fabricated. Experimental results showed a fractional bandwidth of 29%, return loss better than 16 dB, insertion loss of 0.5 dB, and good second harmonic band rejection. The filter exhibited a size reduction of 51% compared with a filter using an unperturbed circular patch resonator at the same frequency. (C) 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 178-182, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23950

Dynamic positioning systems: An experimental analysis of sliding mode control

Vessel dynamic positioning (DP) systems are based on conventional PID-type controllers and an extended Kalman filter. However, they present a difficult tuning procedure, and the closed-loop performance varies with environmental or loading conditions since the dynamics of the vessel are eminently nonlinear. Gain scheduling is normally used to address the nonlinearity of the system. To overcome these problems, a sliding mode control was evaluated. This controller is robust to variations in environmental and loading conditions, it maintains performance and stability for a large range of conditions, and presents an easy tuning methodology. The performance of the controller was evaluated numerically and experimentally in order to address its effectiveness. The results are compared with those obtained from conventional PID controller. (c) 2010 Elsevier Ltd. All rights reserved.

Experimental control of single-mode laser chaos by using continuous, time-delayed feedback

Control of chaos in the single-mode optically pumped far-infrared (NH3)-N-15 laser is experimentally demonstrated using continuous time-delay control. Both the Lorenz spiral chaos and the detuned period-doubling chaos exhibited by the laser have been controlled. While the laser is in the Lorenz spiral chaos regime the chaos has been controlled both such that the laser output is cw, with corrections of only a fraction of a percent necessary to keep it there, and to period one. The laser has also been controlled while in the period-doubling chaos regime, to both the period-one and -two states.

Self-awareness and psychosocial functioning following acquired brain injury: An evaluation of a group support programme

This study investigated a group support programme designed to improve self-awareness deficits and psychosocial functioning in a group of chronic patients (N = 21) with acquired brain injury (ABI). The participants were on average 8.6 years (range: 1-36 years) post-injury and were seen at the Brain Injury Association of Queensland, Australia. The assessment of participants involved two standardised measures of intellectual self-awareness with collateral reports from relatives. The present study introduced a new measure called the Self-Regulation Skills Interview (SRSI) which assessed higher levels of self awareness and self-regulation skills. Psychosocial functioning was assessed using a standardised self-report measure. At baseline the group had a relatively high level of intellectual self-awareness regarding their deficits, a low to moderate level of self-regulation skills, and significant psychosocial impairment. The participants were involved in a 16-week group programme which involved components of cognitive rehabilitation, cognitive-behavioural therapy, and social skills training. A post-intervention assessment indicated that participants had significantly improved levels of self-regulation skills and psychosocial functioning. A 6-month follow-up assessment indicated that overall, participants had maintained the gains made during the programme. The important role of self-regulation skills is emphasised as the principle factor contributing to the maintenance of the gains observed.

Depression in women living with HIV: clinical and psychosocial correlates

The number of Brazilian women living with HIV has increased significantly in past years, rendering studies of their particular care demands including psychiatric issues. This study measures the prevalence of major depression, using the Structured Clinical Interview for DSM-IV Axis I Disorders, in a sample of 120 women living with HIV in treatment at a reference centre in So Paulo. Socio-demographic variables, HIV-related clinical and laboratory data, including CD4+ cell counts and HIV plasma viral loads, as well as psychosocial features (intimate relationships, disclosure of HIV serostatus, partner`s serostatus and patient`s emotional and financial support) were investigated as factors potentially associated with depression. The prevalence of major depression at the time of evaluation was 25.8% (95% CI 18.2-33.4%). Clinical status (p = 0.002), lack of emotional support (p = 0.02), use of antidepressants (p = 0.028) and length of time since HIV diagnosis (p = 0.05) were associated with major depression in univariate analysis. In multivariate multiple-regression model, HIV clinical status, lack of emotional support and higher plasma viral loads were associated with depression. Sixty per cent of the women have a major depression diagnosis during lifetime. We conclude that major depression is highly prevalent among women living with HIV, but it is still underdiagnosed and undertreated.

Mode of action of back-line application of spinosad, a non-systemic parasiticide, on sheep

Spinosad, applied as a jetting solution or dip is an efficacious, non-systemic treatment for the control of Bovicola ovis in sheep. This paper describes the effect of back-line treatment width and group housing of animals on the efficacy of spinosad for the control of lice. A 0.4 mg/kg liveweight dose was found to be the suboptimal dose of spinosad for the control of body lice in a dose titration study and was used to investigate application and housing effects in a second study. Lousy Merino sheep were treated with either a narrow 3-cm application of spinosad or with a wider 25-cm swathe. After treatment they were either kept alone or in groups of 6 sheep per pen. Lice were counted at day 0 and every 14 days to 70 days after treatment before estimation of the percentage of lice control and analysis of treatment effects. A much higher percentage of lice control was achieved with 0.4 mg/kg in the second study than in the first, possibly because of differences in formulation used. The wider application width gave significantly higher (P < 0.05) control of lice than the narrow application when sheep were either housed alone or in groups up to day 42 post-treatment. Greater control of lice was seen in group-housed sheep compared with sheep housed individually (P < 0.05) up to day 70. Using broader application widths combined with holding the animals together after treatment with pour-on formulations may optimise the delivery and efficacy of ectoparasiticides for livestock.

Psychosocial pathways to inconsistent condom use among male sex workers: personality, drug misuse and criminality

Background: This research compared street male sex workers in Santo Andre, Brazil, that reported consistent condom use with those that revealed inconsistent condom use with their clients, concerning personality aspects, impulsiveness, alcohol and drug consumption, depressive symptoms, sociodemographic data and criminal involvement. Methods: Eighty-six male sex workers were evaluated in face-to-face interviews at their place of work. A `snowball` sampling procedure was used to access this hard-to-reach population. Findings: Male sex workers with inconsistent condom use showed greater involvement with criminal activities, higher reward dependence level and more frequent self-report of being HIV-positive. Conclusions: Conceptualisation of male sex workers` psychological characteristics may be required where HIV risk is not only attributed to sex work per se, but to other aspects such as personality-related factors and negative identity.

Psychosocial sequelae of the 1989 Newcastle earthquake .2. Exposure and morbidity profiles during the first 2 years post-disaster

Background. A sample of 1089 Australian adults was selected for the longitudinal component of the Quake Impact Study, a 2-year, four-phase investigation of the psychosocial effects of the 1989 Newcastle earthquake. Of these, 845 (78%) completed a survey 6 months post-disaster as well as one or more of the three follow-up surveys. Methods. The phase I survey was used to construct dimensional indices of self-reported exposure to threat the disruption and also to classify subjects by their membership of five 'at risk' groups (the injured; the displaced; owners of damaged small businesses; helpers in threat and non-threat situations). Psychological morbidity was assessed at each phase using the 12-item General Health Questionnaire (GHQ-12) and the Impact of Event Scale (IES). Results. Psychological morbidity declined over time but tended to stabilize at about 12 months post-disaster for general morbidity (GHQ-12) and at about 18 months for trauma-related (IES) morbidity. Initial exposure to threat and/or disruption were significant predictors of psychological morbidity throughout the study and had superior predictive power to membership of the targeted 'at risk' groups. The degree of ongoing disruption and other life events since the earthquake were also significant predictors of morbidity. The injured reported the highest levels of distress, but there was a relative absence of morbidity among the helpers. Conclusions. Future disaster research should carefully assess the threat and disruption experiences of the survivors at the time of the event and monitor ongoing disruptions in the aftermath in order to target interventions more effectively.