Mikrobielle Prozesskontrolle in Biogasanlagen durch Monitoring der Kohlenstoff-Isotopenverhältnisse im Gasbereich

Der zunehmende Anteil von Strom aus erneuerbaren Energiequellen erfordert ein dynamisches Konzept, um Spitzenlastzeiten und Versorgungslücken aus der Wind- und Solarenergie ausgleichen zu können. Biogasanlagen können aufgrund ihrer hohen energetischen Verfügbarkeit und der Speicherbarkeit von Biogas eine flexible Energiebereitstellung ermöglichen und darüber hinaus über ein „Power-to-Gas“-Verfahren bei einem kurzzeitigen Überschuss von Strom eine Überlastung des Stromnetzes verhindern. Ein nachfrageorientierter Betrieb von Biogasanlagen stellt jedoch hohe Anforderungen an die Mikrobiologie im Reaktor, die sich an die häufig wechselnden Prozessbedingungen wie der Raumbelastung im Reaktor anpassen muss. Eine Überwachung des Fermentationsprozesses in Echtzeit ist daher unabdingbar, um Störungen in den mikrobiellen Gärungswegen frühzeitig erkennen und adäquat entgegenwirken zu können. rnBisherige mikrobielle Populationsanalysen beschränken sich auf aufwendige, molekularbiologische Untersuchungen des Gärsubstrates, deren Ergebnisse dem Betreiber daher nur zeitversetzt zur Verfügung stehen. Im Rahmen dieser Arbeit wurde erstmalig ein Laser-Absorptionsspektrometer zur kontinuierlichen Messung der Kohlenstoff-Isotopenverhältnisse des Methans an einer Forschungsbiogasanlage erprobt. Dabei konnten, in Abhängigkeit der Raumbelastung und Prozessbedingungen variierende Isotopenverhältnisse gemessen werden. Anhand von Isolaten aus dem untersuchten Reaktor konnte zunächst gezeigt werden, dass für jeden Methanogenesepfad (hydrogeno-troph, aceto¬klastisch sowie methylotroph) eine charakteristische, natürliche Isotopensignatur im Biogas nachgewiesen werden kann, sodass eine Identifizierung der aktuell dominierenden methanogenen Reaktionen anhand der Isotopen-verhältnisse im Biogas möglich ist. rnDurch den Einsatz von 13C- und 2H-isotopen¬markierten Substraten in Rein- und Mischkulturen und Batchreaktoren, sowie HPLC- und GC-Unter¬suchungen der Stoffwechselprodukte konnten einige bislang unbekannte C-Flüsse in Bioreaktoren festgestellt werden, die sich wiederum auf die gemessenen Isotopenverhältnisse im Biogas auswirken können. So konnte die Entstehung von Methanol sowie dessen mikrobieller Abbauprodukte bis zur finalen CH4-Bildung anhand von fünf Isolaten erstmalig in einer landwirtschaftlichen Biogasanlage rekonstruiert und das Vorkommen methylotropher Methanogenesewege nachgewiesen werden. Mithilfe molekularbiologischer Methoden wurden darüber hinaus methanoxidierende Bakterien zahlreicher, unbekannter Arten im Reaktor detektiert, deren Vorkommen aufgrund des geringen O2-Gehaltes in Biogasanlagen bislang nicht erwartet wurde. rnDurch die Konstruktion eines synthetischen DNA-Stranges mit den Bindesequenzen für elf spezifische Primerpaare konnte eine neue Methode etabliert werden, anhand derer eine Vielzahl mikrobieller Zielorganismen durch die Verwendung eines einheitlichen Kopienstandards in einer real-time PCR quantifiziert werden können. Eine über 70 Tage durchgeführte, wöchentliche qPCR-Analyse von Fermenterproben zeigte, dass die Isotopenverhältnisse im Biogas signifikant von der Zusammensetzung der Reaktormikrobiota beeinflusst sind. Neben den aktuell dominierenden Methanogenesewegen war es auch möglich, einige bakterielle Reaktionen wie eine syntrophe Acetatoxidation, Acetogenese oder Sulfatreduktion anhand der δ13C (CH4)-Werte zu identifizieren, sodass das hohe Potential einer kontinuierlichen Isotopenmessung zur Prozessanalytik in Biogasanlagen aufgezeigt werden konnte.rn

Development of New Structural Health Monitoring Techniques

During the past two decades, many researchers have developed methods for the detection of structural defects at the early stages to operate the aerospace vehicles safely and to reduce the operating costs. The Surface Response to Excitation (SuRE) method is one of these approaches developed at FIU to reduce the cost and size of the equipment. The SuRE method excites the surface at a series of frequencies and monitors the propagation characteristics of the generated waves. The amplitude of the waves reaching to any point on the surface varies with frequency; however, it remains consistent as long as the integrity and strain distribution on the part is consistent. These spectral characteristics change when cracks develop or the strain distribution changes. The SHM methods may be used for many applications, from the detection of loose screws to the monitoring of manufacturing operations. A scanning laser vibrometer was used in this study to investigate the characteristics of the spectral changes at different points on the parts. The study started with detecting a load on a plate and estimating its location. The modifications on the part with manufacturing operations were detected and the Part-Based Manufacturing Process Performance Monitoring (PbPPM) method was developed. Hardware was prepared to demonstrate the feasibility of the proposed methods in real time. Using low-cost piezoelectric elements and the non-contact scanning laser vibrometer successfully, the data was collected for the SuRE and PbPPM methods. Locational force, loose bolts and material loss could be easily detected by comparing the spectral characteristics of the arriving waves. On-line methods used fast computational methods for estimating the spectrum and detecting the changing operational conditions from sum of the squares of the variations. Neural networks classified the spectrums when the desktop – DSP combination was used. The results demonstrated the feasibility of the SuRE and PbPPM methods.

Development of New Structural Health Monitoring Techniques

During the past two decades, many researchers have developed methods for the detection of structural defects at the early stages to operate the aerospace vehicles safely and to reduce the operating costs. The Surface Response to Excitation (SuRE) method is one of these approaches developed at FIU to reduce the cost and size of the equipment. The SuRE method excites the surface at a series of frequencies and monitors the propagation characteristics of the generated waves. The amplitude of the waves reaching to any point on the surface varies with frequency; however, it remains consistent as long as the integrity and strain distribution on the part is consistent. These spectral characteristics change when cracks develop or the strain distribution changes. The SHM methods may be used for many applications, from the detection of loose screws to the monitoring of manufacturing operations. A scanning laser vibrometer was used in this study to investigate the characteristics of the spectral changes at different points on the parts. The study started with detecting a load on a plate and estimating its location. The modifications on the part with manufacturing operations were detected and the Part-Based Manufacturing Process Performance Monitoring (PbPPM) method was developed. Hardware was prepared to demonstrate the feasibility of the proposed methods in real time. Using low-cost piezoelectric elements and the non-contact scanning laser vibrometer successfully, the data was collected for the SuRE and PbPPM methods. Locational force, loose bolts and material loss could be easily detected by comparing the spectral characteristics of the arriving waves. On-line methods used fast computational methods for estimating the spectrum and detecting the changing operational conditions from sum of the squares of the variations. Neural networks classified the spectrums when the desktop – DSP combination was used. The results demonstrated the feasibility of the SuRE and PbPPM methods.

NIR-spectroscopy for bioprocess monitoring & control

The Ingold port adaption of a free beam NIR spectrometer is tailored for optimal bioprocess monitoring and control. The device shows an excellent signal to noise ratio dedicated to a large free aperture and therefore a large sample volume. This can be seen particularly in the batch trajectories which show a high reproducibility. The robust and compact design withstands rough process environments as well as SIP/CIP cycles. Robust free beam NIR process analyzers are indispensable tools within the PAT/QbD framework for realtime process monitoring and control. They enable multiparametric, non-invasive measurements of analyte concentrations and process trajectories. Free beam NIR spectrometers are an ideal tool to define golden batches and process borders in the sense of QbD. Moreover, sophisticated data analysis both quantitative and MSPC yields directly to a far better process understanding. Information can be provided online in easy to interpret graphs which allow the operator to make fast and knowledge-based decisions. This finally leads to higher stability in process operation, better performance and less failed batches.

Virtual Enterprise Process Management: An Application to Industrial Maintenance

Part 2: Behaviour and Coordination

Colonization and extinction of land planarians (Platyhelminthes, Tricladida) in a Brazilian Atlantic Forest regrowth remnant

Long-term assessments of species assemblages are valuable tools for detecting species ecological preferences and their dispersal tracks, as well as for assessing the possible effects of alien species on native communities. Here we report a 50-year-long study on population dynamics of the four species of land flatworms (Platyhelminthes, Tricladida, Terricola) that have colonized or become extinct in a 70-year-old Atlantic Forest regrowth remnant through the period 1955-2006. On the one hand, the two initially most abundant species, which are native to the study site, Notogynaphallia ernesti and Geoplana multicolor have declined over decades and at present do not exist in the forest remnant. The extinction of these species is most likely related with their preference for open vegetation areas, which presently do not exist in the forest remnant. On the other hand, the neotropical Geoplaninae 1 and the exotic Endeavouria septemlineata were detected in the forest only very recently. The long-term study allowed us to conclude that Geoplaninae 1 was introduced into the study area, although it is only known from the study site. Endeavouria septemlineata, an active predator of the exotic giant African snail, is originally known from Hawaii. This land flatworm species was observed repeatedly in Brazilian anthropogenic areas, and this is the first report of the species in relatively well preserved native forest, which may be evidence of an ongoing adaptive process. Monitoring of its geographic spread and its ecological role would be a good practice for preventing potential damaging effects, since it also feeds on native mollusk fauna, as we observed in lab conditions.

Reasoning about real-time repetitions: terminating and nonterminating

It is common for a real-time system to contain a nonterminating process monitoring an input and controlling an output. Hence, a real-time program development method needs to support nonterminating repetitions. In this paper we develop a general proof rule for reasoning about possibly nonterminating repetitions. The rule makes use of a Floyd-Hoare-style loop invariant that is maintained by each iteration of the repetition, a Jones-style relation between the pre- and post-states on each iteration, and a deadline specifying an upper bound on the starting time of each iteration. The general rule is proved correct with respect to a predicative semantics. In the case of a terminating repetition the rule reduces to the standard rule extended to handle real time. Other special cases include repetitions whose bodies are guaranteed to terminate, nonterminating repetitions with the constant true as a guard, and repetitions whose termination is guaranteed by the inclusion of a fixed deadline. (C) 2002 Elsevier Science B.V. All rights reserved.

Devolução de doses unitárias: análise de uma prática diária

A Distribuição Individual Diária em Dose Unitária deve assegurar o maior rigor no Processo de Distribuição de Medicamentos, o que nem sempre se verificou no Hospital Pedro Hispano, dado que as Doses Unitárias devolvidas pelos Serviços de Internamento, nem sempre seguiam os Parâmetros de Qualidade. Assim, desenvolveu-se um estudo quasi-experimental, longitudinal, prospetivo e analítico, entre 1 de Março a 30 de Junho de 2012, no qual se analisaram as Doses Unitárias, devolvidas pelos Serviços de Internamento da Unidade Local de Saúde de Matosinhos a funcionam com Distribuição Individual Diária em Dose Unitária, tendo-se recolhido as não conformes relativamente aos Parâmetros de Qualidade instituídos. Na 1.ª fase do estudo (Recolha de amostras), foram contabilizadas 337 amostras, correspondentes a uma perda de 471 €. Na 2.ª fase do estudo (Implementação de acções correctivas às amostras previamente recolhidas), foram rejeitadas definitivamente 129 amostras, correspondentes a uma perda de 198 €. Na 4.ª fase do estudo (Segunda recolha de amostras), foram contabilizadas 228 amostras, correspondentes a uma perda de 199 €. A 3.ª fase do estudo incluiu a divulgação dos resultados às enfermeiras chefes dos serviços envolvidos no estudo e a 5.ª fase a comparação dos resultados obtidos na 1.ª, 2.ª e 4.ª fase do estudo. As amostras foram recolhidas em 16 serviços de internamento, sendo os valores monetários mais relevantes associados ao Espessante para alimentos líquidos e ao Imipeno + Cilastatina. A prática observada e sujeita a estudo aumenta os riscos associados ao consumo do medicamento e os custos relativos ao Processo, sendo de eliminar. A sua monitorização deve constituir uma rotina, uma vez que houve mudança de comportamentos. A redução/eliminação desta prática não conforme conduz à integração de novas tarefas com valor acrescentado, com aumento da fiabilidade do Processo.

Gestão integrada da doença : uma abordagem experimental de gestão em sa

RESUMO - Os sistemas de saúde deparam-se, actualmente, com novos paradigmas, ao nível da qualidade da prestação de cuidados de saúde, bem como no que se refere à necessidade de controlo dos custos com o sector da saúde, obrigando as organizações a adaptarem-se por forma a fornecerem a resposta mais adequada às crescentes necessidades dos indivíduos. O reconhecimento desta realidade tem levado os governos de muitos países a definir políticas orientadas para problemas de saúde específicos e a adoptar estratégias de intervenção que privilegiam uma abordagem integrada com o objectivo de melhorarem progressivamente o nível de saúde das populações, a qualidade dos cuidados prestados e a eficiência na utilização de recursos. Em Portugal, a aplicação dos princípios que estiveram na base dos modelos de gestão da doença, deu origem ao modelo experimental de Gestão Integrada da Doença, que incorpora a gestão clínica da doença, centrada no doente, com especial enfoque na sua autogestão e na clarificação das melhores práticas profissionais, visando a sua uniformização; a reorganização do modelo de prestação de cuidados, com a criação de Centros de Elevada Diferenciação e Centros de Tratamento, com especiais preocupações no que concerne à orientação do doente no sistema para que os cuidados lhe seja ministrados no nível mais adequado; um modelo de financiamento específico, indexado aos resultados, que reflicta a adopção das melhores práticas; um sistema de informação que permita a monitorização e avaliação constante deste processo. O desenvolvimento deste modelo organizacional tem-se revelado como uma estratégia inovadora e como uma ferramenta de elevado potencial para a melhoria da prestação de cuidados de saúde e para a promoção de uma maior efectividade e eficiência, tal como poderá, ainda, constituirse como um veículo, importante e permanente, de informação de apoio à decisão em Saúde. Este modelo visa, no fundo, promover uma acção concertada no sentido da obtenção de uma intervenção precisa, através da mobilização de recursos adequados, que permitam uma melhoria do estado de saúde, da qualidade de vida e do bem-estar global dos doentes. Esta abordagem passa pela colaboração e coordenação dos diferentes níveis de prestação de cuidados, no sentido de oferecerem cuidados integrados de saúde, com níveis de qualidade elevados em termos de prevenção, diagnóstico, tratamento, reabilitação e acompanhamento. ------------------------ --ABSTRACT – The health systems are faced with new paradigms, on one hand in the healthcare services delivered to the populations, and on the other hand, in the need to control costs in the health sector, forcing organizations to adapt and provide the most appropriate response to the individuals growing needs. The magnitude of this problem, in terms of public health, requires the adoption of a directed, targeted, planned and integrated action, based on clear and well defined strategies in order to obtain health gains, improving the quality of care and streamlining the costs. In Portugal, the application of those principles forming the basis of the disease management models, led to the Integrated Disease Management model which, apart from the clinical management of the disease, also incorporates the healthcare delivery structure reorganization, a specific financing model based on an information system that allows the process monitoring and evaluation. The development of Integrated Disease Management models is a central strategy and a tool for improving healthcare delivery, more effectively and efficiently, and can even be an important and permanent vehicle of information for health decision support. Therefore, it is important to promote a concerted action towards achieving a precise intervention, mobilizing the resources, improving the health status, quality of life and the overall patients’ wellbeing. This action means increasing collaboration and coordination of the different levels of care, offering integrated healthcare s

Ensino, aprendizagem e avaliação no Ensino Superior: Perspetivas e práticas

Tese de Doutoramento em Ciências da Educação - Especialidade de Desenvolvimento Curricular

Nanocomposites: the contribution of multiscale modelling to improve the dispersion levels

Tese de Doutoramento em Ciência e Engenharia de Polímeros e Compósitos

The multipoint Morisita index for the analysis of spatial patterns

In many fields, the spatial clustering of sampled data points has many consequences. Therefore, several indices have been proposed to assess the level of clustering affecting datasets (e.g. the Morisita index, Ripley's Kfunction and Rényi's generalized entropy). The classical Morisita index measures how many times it is more likely to select two measurement points from the same quadrats (the data set is covered by a regular grid of changing size) than it would be in the case of a random distribution generated from a Poisson process. The multipoint version (k-Morisita) takes into account k points with k >= 2. The present research deals with a new development of the k-Morisita index for (1) monitoring network characterization and for (2) detection of patterns in monitored phenomena. From a theoretical perspective, a connection between the k-Morisita index and multifractality has also been found and highlighted on a mathematical multifractal set.

Interacting software-agents to support a kind of expert supervision systems

Expert supervision systems are software applications specially designed to automate process monitoring. The goal is to reduce the dependency on human operators to assure the correct operation of a process including faulty situations. Construction of this kind of application involves an important task of design and development in order to represent and to manipulate process data and behaviour at different degrees of abstraction for interfacing with data acquisition systems connected to the process. This is an open problem that becomes more complex with the number of variables, parameters and relations to account for the complexity of the process. Multiple specialised modules tuned to solve simpler tasks that operate under a co-ordination provide a solution. A modular architecture based on concepts of software agents, taking advantage of the integration of diverse knowledge-based techniques, is proposed for this purpose. The components (software agents, communication mechanisms and perception/action mechanisms) are based on ICa (Intelligent Control architecture), software middleware supporting the build-up of applications with software agent features

Managing an intellectual property right portfolio in the software industry

Tutkimuksen tavoitteena oli määrittää etuja, joita huolellinen immateriaali-oikeussalkun hallinnointi ohjelmistoalalla luo yritykselle. Tutkimusaineisto on kerätty haastattelemalla eri asemissa olevia ihmisiä kolmesta suomalaisesta ohjelmistoalan tuote- ja palveluyrityksestä. Tutkimuksesta käy ilmi, että ohjelmistoyritysten immateriaalioikeussalkut koostuvat liikesalaisuuksista, tekijänoikeudesta, tavaramerkeistä, verkkotunnuksista ja muutamista patenteista. Kiinnostus patentteihin ohjelmistoalalla on kasvanut erityisesti niiden tuoman tekijänoikeutta vahvemman suojan takia. Tällä hetkellä Euroopassa suhtautuminen ohjelmistopatentteihin on kuitenkin vielä käymistilassa. Jos ohjelmistopatentit hyväksytään, immateriaalioikeussalkun strateginen merkitys kasvaa. Tällöin salkunn hallinnointi tukee yrityksen tavoitteita - esimerkiksi oman toimintavapauden turvaamista - avustaen hakemus-prosessissa, tarkkaillen markkinoita sekä arvioiden yrityksen oman immateriaalioikeussalkun erilaisia hyväksikäyttömahdollisuuksia.

Ydinvoimalaitoksen turbiinilaitoksen toiminnan ja kunnonvalvonnan nykytilan kuvaus ja kehittämismahdollisuuksien kartoitus sekä toteutus ja kannattavuusarviointi

Työssä selvitettiin Olkiluodon ydinvoimalaitoksen prosessiseurannassa nykyisin käytössä olevia järjestelmiä sekä tutkittiin prosessisimulointiohjelman käyttömahdollisuuksia osana prosessiseurantaa. Ensisijaisesti tutkittiin kuinka hyvin simulointimalli soveltuu pienien tehopoikkeamien havainnoimiseen. Simulointimalli rakennettiin Endat Oy:n kehittämällä Prosim-simulointiohjelmalla. Simulointimalli on tehty kahdelle eri prosessille. Erilliset mallit rakennettiin sekä vuoden 2003 vuosihuoltoa edeltäneelle prosessille, että vuosihuollossa lauhteen esilämmityksen osalta muutetulle prosessille. Simulointimallien toimintaa käytännössä testattiin suorittamalla simulointiajoja muutamilla prosessin muutostilanteilla ja vertailemalla muutostilanteiden mittapistedataa simulointiohjelman laskemiin tuloksiin. Simulointimallin suurimmat poikkeamat mittapistedataan verrattuna todettiin turbiinilaitoksen korkeapainepuolella sekä lauhduttimessa. Käytännössä havaittiin, että nämä poikkeamat hankaloittavat simulointiohjelman käyttöä käytönvalvonnan työkaluna, eikä sen käytöstä näin ollen saada varsinaista lisäarvoa.