Produção de enzimas por fungos em fermentação semi-sólida utilizando bagaço de coco e pedúnculo de caju como substratos

The production of enzymes by microorganisms using organic residues is important and it can be associated with several applications such as food and chemical industries and so on. The objective of this work is the production of CMCase, Xylanase, Avicelase and FPase enzymes by solid state fermentation (SSF) using as substrates: bagasse of coconut and dried cashew stem. The microorganisms employed are Penicillium chrysogenum and an isolated fungus from the coconut bark (Aspergillus fumigatus). Through the factorial design methodology and response surface analysis it was possible to study the influence of the humidity and pH. For Penicillium chrysogenum and the isolated fungus, the coconut bagasse was used as culture medium. In another fermentation, it was used the mixture of coconut bagasse and cashew stem. Fermentations were conducted using only the coconut bagasse as substrate in cultures with Penicillium chrysogenum fungus and the isolated one. A mixture with 50% of coconut and 50% of cashew stem was employed only for Penicillium chrysogenum fungus, the cultivation conditions were: 120 hours at 30 °C in BOD, changing humidity and pH values. In order to check the influence of the variables: humidity and pH, a 2 2 factorial experimental design was developed, and then two factors with two levels for each factor and three repetitions at the central point. The levels of the independent variables used in ascending order (-1, 0, +1), to humidity, 66%, 70.5% and 75% and pH 3, 5 and 7, respectively. The software STATISTICA TM (version 7.0, StatSoft, Inc.) was used to calculate the main effects of the variables and their interactions. The response surface methodology was used to optimize the conditions of the SSF. A chemical and a physic-chemical characterization of the coconut bagasse have determined the composition of cellulose (%) = 39.09; Hemicellulose (%) = 23.80, Total Lignin (%) = 36.22 and Pectin (%) = 1.64. To the characterization of cashew stem, the values were cellulose (g) = 15.91 Hemicellulose (%) = 16.77, Total Lignin (%) = 30.04 and Pectin (%) = 15.24. The results indicate the potential of the materials as substrate for semisolid fermentation enzyme production. The two microorganisms used are presented as good producers of cellulases. The results showed the potential of the fungus in the production of CMCase enzyme, with a maximum of 0.282 UI/mL and the Avicelase enzyme the maximum value ranged from 0.018 to 0.020 UI/ mL, using only coconut bagasse as substrate. The Penicillium chrysogenum fungus has showed the best results for CMCase = 0.294 UI/mL, FPase = 0.058 UI/mL, Avicelase = 0.010 UI/mL and Xylanase = 0.644 UI/ mL enzyme, using coconut bagasse and cashew stem as substrates. The Penicllium chrysogenum fungus showed enzymatic activities using only the coconut as substrate for CMCase = 0.233 UI/mL, FPase = 0.031 to 0.032 UI/ mL, Avicelase = 0.018 to 0.020 UI/mL and Xylanase = 0.735 UI/ mL. Thus, it can be concluded that the used organisms and substrates have offered potential for enzyme production processes in a semi-solid cultivation

Controles físico, físico-químico, químico e microbiológico dos frutos de Dimorphandra mollis Benth., Fabaceae

Considerando-se a qualidade dos fitoterápicos, é importante salientar que a preocupação com esta questão inclui rigoroso acompanhamento das diferentes etapas de desenvolvimento e produção, desde a coleta do vegetal até o produto final. O controle de qualidade de drogas vegetais e seus extratos é essencial quando utilizados como matéria-prima para o desenvolvimento de fitoterápicos. Neste trabalho foram utilizadas diversas técnicas (farmacopeicas e não farmacopeicas) visando estabelecer parâmetros de qualidade dos frutos de Dimorphandra mollis Benth. (Leguminosae), popularmente conhecida como faveiro. Os resultados obtidos determinaram as características físico-químicas da droga vegetal e mostraram que o pó dos frutos e o extrato etanólico 70% de D. mollis apresentam um teor de flavonóides de 10,25% e 17,21%, respectivamente. A análise fitoquímica preliminar dos frutos caracterizou a presença de taninos, saponinas e flavonóides. Na análise microbiológica do extrato não houve crescimento de patógenos entre os testes realizados.

Obtenção de diesel verde por craqueamento termocatalítico de óleo de buriti (Mauritia flexuosa L.) sobre materiais nanoestruturados do tipo LaSBA-15

In order to obtain a biofuel similar to mineral diesel, lanthanum-incorporated SBA- 15 nanostructured materials, LaSBA-15(pH), with different Si/La molar ratios (75, 50, 25), were synthesized in a two-steps hydrothermal procedure, with pH-adjusting of the synthesis gel at 6, and were used like catalytic solids in the buriti oil thermal catalytic cracking. These solids were characterized by X-ray fluorescence (XRF), powder X-ray diffraction (XRD), thermogravimetric analysis (TG/DTG), infrared spectroscopy (FTIR), nitrogen porosimetry and ethanol dehydration, aiming to active sites identify. Taken together, the analyses indicated that the synthesis method has employed to obtain materials highly ordered mesostructures with large average pore sizes and high surface area, besides suggested that the lanthanum was incorporated in the SBA-15 both into the framework as well as within the mesopores. Catalytic dehydration of ethanol over the LaSBA-15(pH) products has shown that they have weak Lewis acid and basic functionalities, indicative of the presence of lanthanum oxide in these samples, especially on the La75SBA-15(pH) sample, which has presented the highest selectivity to ethylene. The buriti oil thermal and thermal catalytic cracking, realized from the room temperature to 450 ºC in a simple distillation system, has allowed obtaining two liquid fractions, each consisting of two phases, one aqueous and another organic, organic liquid (OL). The OL obtained from first fractions has shown high acid index, even in the thermal catalytic process. One the other hand, OL coming from second ones, called green diesel (GD), have presented low acid index, particularly that one obtained from the thermal catalytic process realized over LaSBA-15(pH) samples. The acid sites presence in these samples, associated to their large average pore sizes and high surface areas, have allowed them, especially the La75SBA-15(pH), to present deoxygenating activity in the buriti oil thermal catalytic cracking, providing an oxygenates content reduction, particularly carboxylic acids, in the GD. Furthermore, the GD comes from the second liquid fraction obtained in the buriti oil thermal catalytic cracking over this latest solid sample has shown hydrocarbons composition and physic-chemical properties similar to that mineral diesel, beyond sulfur content low

Estudo de materiais mesoporosos funcionalizados com diferentes aminas para captura do dióxido de carbono através do processo de adsorção

Intensive use of machinery and engines burning fuel dumps into the atmosphere huge amounts of carbon dioxide (CO2), causing the intensification of the greenhouse effect. Climate changes that are occurring in the world are directly related to emissions of greenhouse gases, mainly CO2, gases, mainly due to the excessive use of fossil fuels. The search for new technologies to minimize the environmental impacts of this phenomenon has been investigated. Sequestration of CO2 is one of the alternatives that can help minimize greenhouse gas emissions. The CO2 can be captured by the post-combustion technology, by adsorption using adsorbents selective for this purpose. With this objective, were synthesized by hydrothermal method at 100 °C, the type mesoporous materials MCM - 41 and SBA-15. After the synthesis, the materials were submitted to a calcination step and subsequently functionalized with different amines (APTES, MEA, DEA and PEI) through reflux method. The samples functionalized with amines were tested for adsorption of CO2 in order to evaluate their adsorption capacities as well, were subjected to various analyzes of characterization in order to assess the efficiency of the method used for functionalization with amines. The physic-chemical techniques were used: X- ray diffraction (XRD), nitrogen adsorption and desorption (BET/BJH), scanning electron microscopy (SEM), transmission electron microscopy (TEM), CNH Analysis, Thermogravimetry (TG/DTG) and photoelectron spectroscopy X-ray (XPS). The CO2 adsorption experiments were carried out under the following conditions: 100 mg of adsorbent, at 25 °C under a flow of 100 ml/min of CO2, atmospheric pressure and the adsorption variation in time 10-210 min. The X-ray diffraction with the transmission electron micrographs for the samples synthesized and functionalized, MCM-41 and SBA-15 showed characteristic peaks of hexagonal mesoporous structure formation, showing the structure thereof was obtained. The method used was efficient reflux according to XPS and elemental analysis, which showed the presence of amines in the starting materials. The functionalized SBA -15 samples were those that had potential as best adsorbent for CO2 capture when compared with samples of MCM-41, obtaining the maximum adsorption capacity for SBA-15-P sample

Ultrasound efficiency in relation to sodium hypochlorite and filtration adsorption in microbial elimination in a water treatment plant

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Monitoramento de indicadores geoquímicos e avaliação de biodegradação em área contaminada com óleo diesel

A biorremediação natural da água subterrânea contaminada com óleo diesel em um posto de combustíveis foi avaliada mediante o monitoramento de indicadores geoquímicos e ensaios laboratoriais de biodegradação. Durante um período de dois anos foram realizadas quatro coletas de água subterrânea para a avaliação de diversos parâmetros físico-químicos e a concentração de hidrocarbonetos. As análises microbiológicas consistiram na contagem de bactérias heterotróficas totais, na verificação da presença de bactérias hidrocarbonoclásticas e no teste de biodegradabilidade utilizando o indicador redox DCPIP. Foi possível identificar fatores que corroboram o emprego da técnica de biorremediação natural para o tratamento da água subterrânea, contudo, a presença de hidrocarbonetos retidos no solo representa uma fonte contínua de contaminação, por isso se faz necessário o monitoramento a longo prazo.

Relações da atividade agropecuária com parâmetros físicos químicos da água

Water Quality Index (WQI) was used during summer and winter of 1994 and 1995 in the final section of Onça and Feijão streams, downstream Broa Reservoir (São Carlos/SP) to evaluate agricultural and catlleman effects. In Onça stream water quality was acceptable in winter and inappropriate to conventional treatment in the summer. In Feijão stream the water had an excellent quality in winter and good in the summer. A MANOVA (Multivariate Analysis of Variance) has used to discriminate seasons and streams. Correlation (p<0,05) among the variables was tested. Water temperature, turbidity, pH and fecal bacteria are highly correlated and can be one of the factors that cause WQI change by seasons.

Estudo do aproveitamento das vísceras do jacaré do pantanal (Caiman crocodilus yacare ) em farinha de carne

O presente trabalho teve por objetivo a produção de farinha de carne a partir das vísceras do jacaré do pantanal (Caiman crocodilus yacare) e o estudo das propriedades físico-químicas, bioquímicas e bacteriológicas da farinha elaborada. Essas características que servem de parâmetro de controle de qualidade, são normalmente exigidas na comercialização de farinhas de carne elaboradas a partir de vísceras e outros materiais de descarte para animais de consumo doméstico. Os resultados obtidos do pH, acidez solúvel, composição percentual dos componentes, dos minerais Ca e P, digestibilidade em pepsina, aspecto microbiológico (presença de salmonela) e estabilidade avaliada pelo nº de TBARS da farinha mostram ser viável o uso das vísceras do jacaré do pantanal como fonte alternativa de nutrientes para incorporação nas formulações de ração animal .

Avaliação microbiológica e físico-química de leites uht produzidos no Estado do Paraná - Brasil

The present work analyzed 150 UHT whole milk samples from three different brands, commercialized in city of Palotina (Paraná, Brazil), between October of 2004 and February of 2005. Mesophilic aerobic bacteria counting results were compared to the Agriculture Ministry of Brazil official standards (RTIQ) for UHT milk. 36 (24%) of the sample presented higher mesophilic bacteria counting according to the standards. Also, were proceeded physic-chemical analyses of those samples. 7.3% of the acidity results, 29% of crude fat and 50.7% of dry matter without fat were disagreeing to RTIQ. All samples accorded to the standards for cryoscopy and alcohol stability tests.

Aspectos nutricionais de farinhas de vísceras de aves e sua utilização em rações de frangos de corte

In the process of slaughtering chickens, parts of them are discarded because are unfit for human consumption. These wastes should be directed to a destination that does not promote any risk to the environment and above all, according with the laws regulating waste disposal. So, the wastes are transformed into byproducts for utilization in the animal nutrition, poultry and swine feeding, but cannot use for ruminant feed, only non-ruminant feeding. In Brazil, the first scientific studies on the use of by-products of poultry slaughter as a protein source in diets for broiler chickens were started in the 1960's, and these results were used for a long time for food formulation, but the need to improve the herds stimulated the search for improvement in technologies for more accurate diet formulations. The objective of this article is to review some aspects of the physic-chemical composition, energy values and their use in diets for broilers.

Remoción de fósforo de diferentes aguas residuales en reactores aeróbios de lecho fluidizado trifásico con circulación interna

The wastewater discharge produces impacts on receiving water bodies. Nutrients as P produce implications on lentic systems because they accelerate the eutrophication processes. Several technologies for P removal from the wastewater have been used: physic chemical treatment systems with important effects by coagulant products addition; biological processes based on anaerobic and aerobic conditions with great implications on the required volume; natural systems as stabilization ponds and irrigation require bigger areas and post-treatment processes. The aerobic fluidized bed reactors with internal circulation (AFBRIC) are compact options with high concentrations of active biomass that have demonstrated their capacity for organic matter and N removal. For sewage from the wastewater pumping station of Ilha Solteira city and effluents of a recirculation aquaculture system (RAS) for semi-intensive tilapia farming, the reactive P and total P removal efficiency in three AFBRIC with 250 mm external tube diameter and different internal tube diameter (ITD), for two different support media at different concentrations was evaluated. The average reactive P removal efficiency for domestic wastewater to hydraulic retention time (HRT) of 3 hours and 125 mm ITD reactor varied from 25,6 to 38,4% and with 150 mm ITD reactor varied from 27,5 to 32,5%; the average total P removal for the RAS wastewater at a HRT of 0,19 hours and 100 mm ITD was of 32,7%.

Fator Pró-digestão inicial® e Isoterápico® na larvicultura da tilápia-do-Nilo: avaliação do índice de parasitismo, integridade hepática e branquial

Pós-graduação em Aquicultura - FCAV

Avaliação dos efeitos citotóxicos, genotóxicos e mutagênicos de efluentes de refinaria de petróleo, por meio dos sistemas testes de Allium cepa e Oreochromis niloticus

Pós-graduação em Ciências Biológicas (Biologia Celular e Molecular) - IBRC

Caracterização bioquímica e centesimal das espécies Astrocaryum vulgare Mart. (tucumã) e Endopleura uchi (Huber) Cuatrec. (uxi) nativas da região Amazônica

Pós-graduação em Biotecnologia - IQ

Construção e desenvolvimento de um secador de leito pulso-fluidizado para secagem de pastas e polpas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)