Design of laminated structures using piezoelectric materials

Composite structures incorporating piezoelectric sensors and actuators are increasingly becoming important due to the offer of potential benefits in a wide range of engineering applications such as vibration and noise supression, shape control and precisition positioning. This paper presents a finit element formulation based on classical laminated plate theory for laminated structures with integrated piezoelectric layers or patches, acting as actuators. The finite element model is a single layer triangular nonconforming plate/shell element with 18 degrees of freedom for the generalized displacements, and one electrical potential degree of freedom for each piezsoelectric elementlayer or patch, witch are surface bonded on the laminate. An optimization of the patches position is performed to maximize the piezoelectric actuators efficiency as well as, the electric potential distribuition is search to reach the specified structure transverse displacement distribuition (shape control). A gradient based algorithm is used for this purpose. The model is applied in the optimization of illustrative laminated plate cases, and the results are presented and discussed.

Finit element model for active control of adaptive laminated structures

A finite element formulation for active vibration control of thin plate laminated structures with integrated piezoelectric layers, acting as sensors and actuators in presented. The finite element model is a nonconforming single layer triangular plate/shell element with 18 degrees of freedom for the generalized displacements and one electrical potential degree of freedom for each piezoelectric element layer, and is based on the kirchhoff classical laminated theory. To achieve a mechanism of active control of the structure dynamic response, a feedback control algorithm is used, coupling the sensor and active piezoelectric layers, and Newmark method is used to calculate yhe dynamic response of the laminated structures. The model is applied in the solution of several illustrative cases, and the results are presented and discussed.

Non-linear analysis of piezolaminated structures

In the recent years the study of smart structures has attracted significant researchers, due to their potential benefits in a wide range of applications, such as shape control, vibration suppression, noise attenuation and damage detection. The applications in aerospace industry are of great relevance, such as in active control of airplane wings, helicopter blade rotor, space antenna. The use of smart materials, such as piezoelectric materials, in the form of layers or patches embedded and/or surface bonded on laminated composite structures, can provide structures that combine the superior mechanical properties of composite materials and the capability to sense and adapt their static and dynamic response, becoming adaptive structures. The piezoelectric materials have the property of generate electrical charge under mechanical load or deformation, and the reverse, applying an electrical field to the material results in mechanical strain or stresses.

Open source data sensing software for ultrasonic non-invasive temperature estimation

In this paper, an open source solution for measurement of temperature and ultrasonic signals (RF-lines) is proposed. This software is an alternative to the expensive commercial data acquisition software, enabling the user to tune applications to particular acquisition architectures. The collected ultrasonic and temperature signals were used for non-invasive temperature estimation using neural networks. The existence of precise temperature estimators is an essential point aiming at the secure and effective applica tion of thermal therapies in humans. If such estimators exist then effective controllers could be developed for the therapeutic instrumentation. In previous works the time-shift between RF-lines echoes were extracted, and used for creation of neural networks estimators. The obtained estimators successfully represent the temperature in the time-space domain, achieving a maximum absolute error inferior to the threshold value defined for hyperthermia/diathermia applications.

Assessment of hydrogen sulfide removal from biogas using a field scale anoxic biotrickling filter.

Hydrogen sulphide is one of the most toxic and corrosive compound present in swine-derived biogas streams.In this study, afield scale biotrickling filter for the removal of hydrogen sulfide was investigated.A Biofilter packed with supporting biofilm materials was fed continuously with a proprietary nutrient solution and operatedfor over 73days. The system has been operating with a H2S inlet concentrations ranging from 1,000to 3,000 ppm.Significant removal efficiencies >95% was demonstrated. pH of the stock feeding solution decreased from 6.2 to as low as 3.5within couple days.The resulting drop in pH provided circumstantial evidence to support biological H2 Soxidation to sulphuric acid by sulfide-oxidizers. Sulfur precipitation was also observed to occur. The results suggested that H2S removal from biogas stream can be efficiently achieved using portable, low cost and maintenance free biotrickling filters.

Use of swine waste-derived biogas to enhance microalgae productivity.

The effects of swine wastewater-derived biogas on microalgae productivity were determined. Experiments were conducted in a closed photobioreactor containing digestate effluent as culturing media and biogas in the headspaceas source of CO2. Experiments were carried out under mixothrophic and autothrophic conditions. Results showed that autotrophic growth rate (0.6 d-1)was twofoldfaster than mixotrophic. Frequent reinjections of biogas containing up to 2,000 ppm of hydrogen sulfide was not inhibitory to microalgae growth. The rapid removal of H2S in the system suggests photobioreactors can be an interesting alternative to biogas purification. A model to estimate microalgae productivity based on the amount of available CO2, inorganic and organic carbon was developedand showed good data fit correlation (r²= 0.99).

Determination of microalgae cellular composition after phycoremediation of swine wastewaters.

Phycoremediation of swine wastewaters has been widely reported as an attractive tertiary treatment system, that effectively removes the excessive nutrient loadswhilst offering a valuable source of feedstock biomass. Digestate from an upflow anaerobic sludge blanket (UASB, 6%v/v) and a nitrification reactor (NR; 50% v/v) were used as culturing media to microalgae. Experiments were carried out in lab scale photobioreactors (PBRs) using a consortia of Chlorella and Scenedesmus. Ammonia (44 to 90%) and phosphorus (77%) were efficiently removed from both effluents tested after 4 days. Microalgae biomass harvested from the UASB effluent showed 57, 34 and 1% of proteins, carbohydrates and lipids, respectively. Comparatively, the cellular composition of microalgae grown on NR effluent had lower protein (43%) but higher carbohydrate (42%) contents. Negligible difference in lipid fraction was observed independently of the effluents tested. The results suggest that the biomass harvested from phycoremediation of swine wastewaters can offer a valuable protein and carbohydrate feedstock for nutritional and biotechnological applications.

Biodiversity and quantification of functional bacteria in deammonification process.

2015

The influence of use additives on nitrous oxide emission during swine slurry composting.

use of additives (Mg/P and nitrification inhibitor dicyandiamide - DCD), on nitrous oxide emission during swine slurry composting. The experiment was run in duplicate; the gas was monitored for 30 days in different treatments (control, DCD, Mg/P and DCD + Mg/P). Nitrous oxide emissions rate (mg of N2O-N.day-1) and the accumulated emissions were calculated to compare the treatments. Results has shown that emissions of N-N2O were reduced by approximately 70, 46 and 96% through the additions of DCD, MgCl2.6H2O + H3PO4 and both additives, respectively, compared to the control. Keywords Composting; swine slurry; additives; nitrous

Comment la crainte de sous-protection engendrera la catastrophe de la surprotection:examen constitutionnel du Digital Millenium Copyright Act

Chaque apparition d’une nouvelle technologie remet inévitablement en cause le cadre législatif établi pour protéger les droits de propriété. Cependant, avec la numérisation de l’information et l’avènement d’Internet, il est de plus en plus facile de reproduire et de distribuer librement des œuvres protégées. Toutefois, depuis le 20 décembre 1996, l’Organisation Mondiale de la Propriété Intellectuelle (OMPI) a adopté deux traités ayant pour objectif principal d’adapter le cadre juridique du droit d’auteur aux nouvelles technologies. C’est pour se conformer à ces traités que l’administration Clinton a adopté le Digital Millenium Copyright Act (DMCA) en 1998. Cet article examine d’abord les dimensions constitutionnelle du Copyright américain, et plus spécifiquement certaines limites qui viennent tempérer les prérogatives exclusives des titulaires de droits, notamment le domaine public et les usages équitables possibles d’ une œuvre. Sont ensuite examinés le DMCA et sa conformité aux principes énoncés à la clause constitutionnelle, source du pouvoir législatif du Congrès américain en matière de Copyright. De plus, comme le DMCA interdit non seulement le contournement de technologies protégeant une œuvre en format numérique, mais également la fabrication et la diffusion de technologies permettant d’arriver à cette fin, cet article analyse les répercussions de cette loi sur la liberté d’expression.

Problemas y consecuencias del resurgir del pragmatismo norteamericano: 1952-1976

Revisión crítica de la ‘versión heredada’ sobre el resurgir del pragmatismo norteamericano. Aquí sostengo que ésta es una narrativa sobre la historia de la filosofía que puede ser usada para “reivindicar” la continuidad o para “añorar” la pérdida de esa tradición. Presento tres argumentos a favor de mi tesis sobre la versión heredada: i) es insuficiente para explicar el surgimiento del pragmatismo; ii) es un tipo de narrativa que hace plausible una imagen de la filosofía; iii) impide apreciar que la formación del canon obedece a los propósitos de los seguidores del movimiento.

Proprioceptive and behavior impairments in individuals with anterior cruciate ligament reconstructed knees

Objective: To assess sensory deficits and their effects on proprioceptive and motor function in patients who had undergone unilateral anterior cruciate ligament (ACL) reconstruction.Design: Four evaluations were conducted: (1) joint position perception of the knee for predetermined angles (0degrees, 15degrees, 30degrees, 45degrees, 60degrees); (2) threshold for detection of passive knee motion at 0degrees, 15degrees, 30degrees, 45degrees, and 60degrees moving into flexion and at 15degrees, 30degrees, 45degrees, and 60degrees moving into extension; (3) latency onset of hamstring muscles; and (4) postural control during upright double- and single-leg stance.Setting: Movement laboratory in Brazil.Participants: Ten participants who had surgical reconstruction of the ACL (reconstructed group) and 10 participants without knee injury (control group).Interventions: Not applicable.Main Outcome Measures: Absolute error, angular displacement, hamstring muscles latency, and mean sway amplitude.Results: Individuals with a reconstructed knee showed decreased joint position perception, a higher threshold for detection of passive knee motion, longer latency of hamstring muscles, and decreased performance in postural control.Conclusions: After lesion and ACL reconstruction, sensory and motor behavior changes were still observed. This may be because of the lack of proprioceptive information resulting from the ACL lesion and/or substitution of ACL by the graft. (C) 2003 by the American Congress of Rehabilitation Medicine and the American Academy of Physical Medicine and Rehabilitation.

Aprendizado de máquina simbólico e técnicas fractais para caracterizar rejeição em biópsia miocárdica

This work combines symbolic machine learning and multiscale fractal techniques to generate models that characterize cellular rejection in myocardial biopsies and that can base a diagnosis support system. The models express the knowledge by the features threshold, fractal dimension, lacunarity, number of clusters, spatial percolation and percolation probability, all obtained with myocardial biopsies processing. Models were evaluated and the most significant was the one generated by the C4.5 algorithm for the features spatial percolation and number of clusters. The result is relevant and contributes to the specialized literature since it determines a standard diagnosis protocol. © 2013 Springer.