949 resultados para PE monofilament
Resumo:
As part of the ongoing studies concerned with the small-scale fisheries of the South of Portugal, experimental fishing was carried out with monofilament gillnets and small hook longlines within the same area. Sixty-two species were caught, of which 20 were common to both gears. Pronounced differences in terms of the relative importance of different species in the catches were observed. Size selection patterns also differed, with highly overlapped hook catch distributions and few species showing evidence for size selectivity. In contrast, strong selectivity was characteristic of species which tend to be wedged in gillnets. Whereas smaller stretched mesh sizes (particularly 40 and 50 mm) caught significant numbers of illegal sized fish, this was mininmal in the longlines. Some implications for management are discussed.
Resumo:
During the months of June through September in 1991 and 1992, 71 shark longlines were fished in the Chesapeake Bight region ofthe U.S. mid-Atlantic coast with a combination of rope/steel (Yankee) and monofilament gangions. A total of 288 sharks were taken on 3,666 monofilament gangions, and 352 sharks were caught on 6,975 Yankee gangions. Catch rates between gear types differed by depth strata, by month, and by species. Analyses were divided between efforts in the nursery ground ofthe sandbar shark, Carcharhinus plumbeus, in Chesapeake Bay and efforts outside the Bay. Mean catch per unit effort (CPUE) ± SE, as sharks caught per 100 hooks fished, was significantly (P<0.05) lower for Yankee gangions. Mean CPUE's for sandbar sharks in the nursery ground were 20.6 ± 3.8 for Yankee gangions and 26.0 ± 3.0 for monofilament gangions, and mean CPUE's for all species combined outside the Bay were 3.7 ± 0.7 for Yankee gangions, and 6.9 ± 1.2 for monofilament gangions.
Resumo:
The authors have discussed the results of comparative fishing, conducted in the Govindsagar reservoir, with simple monofilament and multifilament gill nets. The experiments were conducted both in clear and turbid water. In both these water masses, the monofilament gill net has been found to be more efficient. It is also found that the four major species of fishes of the reservoir have not shown any preference towards a specific gear.
Resumo:
Results of comparative fishing operations conducted with three nets of identical design made of nylon, twisted polyethylene monofilament and high density polyethylene (HDPE) tape twines are presented in this communication. Since the tape net recorded the highest prawn and fish catch, monofilament and nylon following in order, it can be recommended to the fishing industry as one of the cheapest and effective fishing materials evolved for trawl fabrication.
Resumo:
聚丙烯是一种优异的高分子材料,但其低温抗冲击性能欠佳,因而限制了其应用范围。采用PP与PE嵌段共聚来改善PP的抗冲击性能是世界上目前行之有效的方法,因而引起人们的重视。由于聚丙烯嵌段共聚物(PP-b-PE)是由多组分组成的复杂体系,对其组成和链的结构仍不十分清楚。因此,本工作选取国外(6组)和国内(5组)共计11组PP-b-PE样品,分别对其结构、性能及其影响因素进行了研究,为实际应用提供了依据。为了保证能将PP-b-PE中的橡胶成分抽提出来,先将PP-b-PE样品用二甲苯溶解,之后加入甲醇沉淀、过滤、干燥,最后用正庚烷抽提,使得PP-b-PE样品中正庚烷的不可溶物与可溶物完全分离。其中,可溶物即为橡胶,不可溶物为塑料。再利用高温核磁共振谱仪(NMR)、示差扫描量热仪(DSC)和傅立汗卜变换红外谱仪(FT-IR)等先进的分析技术手段进行结构分析,并用原子力显微镜(AFM)观察生产过程中样品的形貌。实验和分析结果表明:在正庚烷可溶物中含有低熔点的聚丙烯和嵌段长度不同且能结晶的聚乙烯;并且还含有属于乙丙无规共聚物橡胶部分的n值小于4的(-CH2-)n结构,以及嵌有结晶性的丙烯和乙烯链节。正庚烷的不可溶物主要为聚丙烯,及少量聚乙烯。对于不同物性的PP-b-PE而言,正庚烷不可溶物决定了其刚性,正庚烷可溶物决定了其韧性,并由其粘度比决定了橡胶在聚丙烯中的分布情况。用AFM来研究PP-b-PE中的橡胶颗粒的分布情况是非常好的分析方法。PP-b-PE样品中橡胶的含量及其组成成分将对PP-b-PE的性能产生很大的影响。国内用浆液法生产的PP-b-PE样品中橡胶含量相对于用液一气相法和气相法生产的要少,但在其正庚烷不可溶物中含有较多的乙烯。从而可以用控制乙烯的含量来改善其抗冲击性能,这是浆液法与液一气相法和气相法的最大区别。液一气相法和气相法生产的PP-b-PE样品中的正庚烷可溶物的含量和结构十分接近。结果表明,本文采用多种不同的先进的分析方法和实验手段对PP-b-PE的结构与性能的研究是一条有效可行的实验途径。
Resumo:
试图澄清“PP-PE”结构与性能的关系,并以此为指导寻求增容改性PP/HDPE体系的新途径是本工作的主要内容。在本工作中,考虑到分子量、EPC组分和共混均匀性因素之后发现,“PP-PE”与相同条件下合成的均聚物样品构成的共混物之间在应力-应变行为、抗冲击性能和动态力学行为上并没有明显差别。在结合文献中有关现象详尽讨论了关于活性链寿命报导值和“(PP-PE)_(200)"的C~(13)NMR谱支持嵌段结构观点的可靠性之后,得到的结论是,现有实验现象不中以证明“PP-PE”具有嵌段结构,尽管四十年来这一观点已被普遍接受。通过TEM观察到,“PP-PE”与PP/HMWPE共混物结晶结构相同,“PP-PE”中的PE部分明显具有HMWPE的片晶特征,应力-应变和SEM实验的结果显示,“PP-PE”与HMWPE具有完全相同的增容PP/HDPE的作用。结合有关共混物结构和性能的实验结果,发现“PP-PE”主要是一个共混物,其中的HMWPE和EPC组分是决定其性能行为的主要因素。尽管在理论和实验上都已确认,分子量的增大不利于共混物组分间的相容,但通过应力-应变实验和形态结构的观察发现,虽然均聚物HMWPE的加入使PP/HDPE体系中PE组分平均分子量增大,但是体系中分散相尺寸却随HMWPE含量的增加大幅度减小,力学性能全面提高。HMWPE这种同接枝和嵌段共聚相似的增容作用既不能用“相似相容”,也不能用所谓“特殊相互作用”来阐明。为此,在本工作中提出了一个新的增容机制——“缠结作用”。应力-应变实验表明,PP/HMWPE体系的力学性能明显优于PP/HDPE体系。前者强度和断裂伸长率都高于后者,其差别尤以断裂伸长率为甚,而模量相差不大。SEM形态结构的观察发现,虽然PP/HDPE体系中的分散相尺寸随其量的增加而增大,并且界面清晰,但PP/HMWPE中的缠结作用使得组分间界面模糊,甚至消失。这种较强的组分间相互作用使得材料由脆性断裂转变为韧性断裂。PP/HMWPE的性能特点进一步证实了非理想换气条件下制备的“PP-PE”结构与性能的关系。
Resumo:
通过对PE(portable executable)文件格式的了解,编写PE分析工具对文件内部结构进行分析。详细介绍了对PE可执行文件加壳的全过程,在此过程中巧妙地使用MD5、CRC32等成熟的hash算法及防API断点跟踪等多种反破解技术,并采用自动隐藏加密方案,大大地提高了软件的保护力度。
Resumo:
A method was adopted to fix a series of polymers of PE-b-PEO with different PEO/PE segments on the chains of LLDPE. Maleic anhydride (MA) reacting with hydroxyl group of PE-b-PEO (mPE-b-PEO) was used as the intermediate. The structures of intermediates and graft copolymers were approved by H-1 NMR and FTIR. XPS analysis revealed a great amount of oxygen on the surface of grafted copolymers although the end group of PEO was fixed on the LLDPE chains through MA. Thermal properties of the graft copolymers as determined by differential scanning calorimetry (DSC) showed that PE segments in the grafted monomers could promote the heterogeneous nucleation of the polymer, increase T., and crystal growth rate.
Resumo:
采用选择性溶剂交替抽提的方法提纯在PE-g-PB-g-MA/PA6共混物中原位生成的接枝共聚物PE-g-PB-g-PA6,通过TEM﹑XPS﹑XRD﹑DSC等方法研究了该接枝共聚物的形貌与结晶行为。结果表明,PA6链段的结晶受到相形貌和分子结构的限制,扩散速度降低,导致在通常的结晶速率条件下(10℃/min)结晶不完善。
Resumo:
采用独特的二次溶解和沉淀的萃取方法,将PP b PE中的不可溶物与可溶物分离,并通过1 3C NMR,DSC,FT IR进行结构与性能的研究
Resumo:
研究了PP/TAIC(三烯丙基异腈脲酸酯)/PE共混体系的辐射增强相界面反应。应用SEM、DDV对共混体系的形态结构和相容性进行了表征,发现多官能团单体TAIC对PP/PE体系有较好的辐射增强作用,共混物的力学性能得到改善。
Resumo:
The effects of lamellar thickness on the epitaxial crystallization of polyethylene on the oriented isotatic polypropylene have been studied by means of transmission electron microscopy. The results obtained from the bright field electron microscopy and electron diffraction show that the epitaxial orientation of the PE crystals on the iPP substrate depends not only on the thickness of the oriented iPP lamellae, but also on the lamellar thickness of PE crystals. No epitaxial orientation relationship between PE crystal and iPP substrate can be found, when the PE crystals are thicker than the lamellar thickness of iPP along the matching direction. This suggests, that the epitaxial nucleation of PE in the PE/iPP epitaxial system is controlled not only by the chain-row matching, but also by a secondary nucleation process.
Resumo:
本研究中采用三烯丙基异腈脲酸酯(TAIC)和三羟甲基丙烷三甲基丙烯酸酯(TMPTMA)为PP/PE共混体系的多官能团单体。研究了辐照剂量,多官能团单体种类和多官能团单体用量对共混物形态结构及力学性能的影响。发现TAIC及TMPTMA对PP/PE体系有较好的增容作用,共混物具有好的相容性,力学性能得到改善。