Tyrosine kinases and calcium dependent activation of endothelial cell phospholipase D by diperoxovanadate

Reactive oxygen species (ROS) mediated modulation of signal transduction pathways represent an important mechanism of cell injury and barrier dysfunction leading to the development of vascular disorders. Towards understanding the role of ROS in vascular dysfunction, we investigated the effect of diperoxovanadate (DPV), derived from mixing hydrogen peroxide and vanadate, on the activation of phospholipase D (PLD) in bovine pulmonary artery endothelial cells (BPAECs). Addition of DPV to BPAECs in the presence of .05% butanol resulted in an accumulation of [P-32] phosphatidylbutanol (PBt) in a dose- and time-dependent manner. DPV also caused an increase in tyrosine phosphorylation of several protein bands (Mr 20-200 kD), as determined by Western blot analysis with antiphosphotyrosine antibodies. The DPV-induced [P-32] PBt-accumulation was inhibited by putative tyrosine kinase inhibitors such as genistein, herbimycin, tyrphostin and by chelation of Ca2+ with either EGTA or BAPTA, however, pretreatment of BPAECs with the inhibitor PKC bisindolylmaleimide showed minimal inhibition. Also down-regulation of PKC alpha and epsilon, the major isotypes of PKC in BPAECs, by TPA (100 nM, 18 h) did not attenuate the DPV-induced PLD activation. The effects of putative tyrosine kinase and PKC inhibitors were specific as determined by comparing [P-32] PBt formation between DPV and TPA. In addition to tyrosine kinase inhibitors, antioxidants such as N-acetylcysteine and pyrrolidine dithiocarbamate also attenuated DPV-induced protein tyrosine phosphorylation and PLD stimulation. These results suggest that oxidation, prevented by reduction with thiol compounds, is involved in DPV-dependent protein tyrosine phosphorylation and PLD activation.

Plasmodium berghei glycine cleavage system T-protein is non-essential for parasite survival in vertebrate and invertebrate hosts

T-protein, an aminomethyltransferase, represents one of the four components of glycine cleavage system (GCS) and catalyzes the transfer of methylene group from H-protein intermediate to tetrahydrofolate (THF) forming N-5, N-10-methylene THF (CH2-THF) with the release of ammonia. The malaria parasite genome encodes T-, H- and L-proteins, but not P-protein which is a glycine decarboxylase generating the aminomethylene group. A putative GCS has been considered to be functional in the parasite mitochondrion despite the absence of a detectable P-protein homologue. In the present study, the mitochondrial localization of T-protein in the malaria parasite was confirmed by immunofluorescence and its essentiality in the entire parasite life cycle was studied by targeting the T-protein locus in Plasmodium berghei (Pb). PbT knock out parasites did not show any growth defect in asexual, sexual and liver stages indicating that the T-protein is dispensable for parasite survival in vertebrate and invertebrate hosts. The absence of P-protein homologue and the non-essentiality of T protein suggest the possible redundancy of GCS activity in the malaria parasite. Nevertheless, the H- and L-proteins of GCS could be essential for malaria parasite because of their involvement in alpha-lcetoacid dehydrogenase reactions. (C) 2014 Elsevier B.V. All rights reserved.

Gestão de saúde, segurança, meio ambiente e responsabilidade social em micro e pequenas empresas recicladoras de plásticos PEBD e PET no Estado do Rio de Janeiro

A presente dissertação tem como tema a gestão de saúde, segurança, meio ambiente e responsabilidade social em micro e pequenas empresas recicladoras de plásticos PEBD e PET no Estado do Rio de Janeiro. A reciclagem de plástico contribui para minimizar os resíduos sólidos gerados pelos processos industriais. O objetivo geral deste estudo é verificar como as atividades de reciclagem impactam na saúde e na segurança do trabalhador e levantar algumas questões relacionadas com a responsabilidade sócio-ambiental, com destaque para o atendimento às normas regulamentadoras, legislação de saúde, segurança e meio ambiente aplicável e sistemas de gestão. Para atingir tal objetivo, a metodologia do presente estudo foi dividida em: pesquisa bibliográfica, elaborada através de consultas a livros, a artigos, a legislação e a bancos de dados de reconhecida credibilidade; elaboração de um questionário direcionado; visitas técnicas, e entrevistas com os encarregados ou donos das empresas, a fim de obter dados para avaliar as condições de trabalho relativas à saúde e segurança, meio ambiente e responsabilidade social. Durante esta etapa foram visitadas quatro recicladoras de plástico, todas situadas no Estado do Rio de Janeiro, sendo três do segmento de PEBD e uma de PET. Os resultados obtidos mostram que, numa avaliação global, apenas 24% dos itens avaliados foram atendidos na sua íntegra, o que demonstra um baixo índice de atendimento às questões relativas à saúde, segurança e meio ambiente e responsabilidade social. Nas avaliações individuais destes mesmos itens constatou-se que o atendimento foi de 38%, 10% e 54%, respectivamente. Enfim, o presente estudo mostra que há necessidade de maior atenção aos requisitos relativos à saúde e segurança do trabalhador, ao meio ambiente e às questões sociais, em função dos riscos do processo de produção do plástico reciclado

Extended fractional Fourier transforms

The concept of an extended fractional Fourier transform (FRT) is suggested. Previous PBT's and complex FRT's are only its subclasses. Then, through this concept and its method, we explain the physical meaning of any optical Fresnel diffraction through a lens: It is just an extended FRT; a lens-cascaded system can equivalently be simplified to a simple analyzer of the FRT; the two-independent-parameter FRT of an object illuminated with a plane wave can be readily implemented by a lens of arbitrary focal length; when cascading, the Function of each lens unit and the relationship between the adjacent ones are clear and simple; and more parameters and fewer restrictions on cascading make the optical design easy. (C) 1997 Optical Society of America.

功能化聚丙烯及其与聚对苯二甲酸丁二醇酯共混物的制备及结构性能研究

本工作通过电子束预辐照处理和反应挤出方法，制备了丙烯酸功能化预辐照聚丙烯rPP-g-AA，采用化学滴定和红外光谱方法均证明接枝共聚物的存在，同时确定了预辐照剂量和单体浓度对接枝率的影响：（1）当单体浓度一定时，接枝率随预辐照剂量的增加而增加并逐渐达到平台值；（2）当预辐照剂量固定时，单体浓度在0～4.0wt%范围内，接枝率几乎呈线性增加。研究发现，丙烯酸(AA)接枝链能起到异相成核作用而促进预辐照聚丙烯(rPP)的结晶过程，但却不改变结晶晶型；虽然接枝反应可以部分抑制降解反应，但相对于原料聚丙烯(PP)，接枝产物的力学性能仍大大下降；因此提出的反应机理认为接枝反应主要是通过链断裂降解反应形成的端自由基引发的，从而形成了以端基接枝为主的产物。 为了控制PP接枝过程中的严重降解，本工作首次提出了均相和异相引发接枝反应的原理，即采用部分rPP和预辐照聚乙烯(rPE)分别作为PP接枝反应的均相和异相“引发剂”，经反应挤出制备丙烯酸功能化聚丙烯PP-g-AA。对于均相引发体系：（1）当rPP用量为20phr时，PP-g-AA的接枝率已经达到rPP-g-AA的水平，而且降解反应得到有效控制；（2）和PP/rPP-g-AA共混物的对比研究证明，均相引发接枝产物不但接枝率明显提高，而且接枝分布非常均匀；（3）由此提出均相引发主要是发生rPP和PP分子间夺氢反应并形成以基体PP接枝为主的产物，而rPP分子内夺氢反应形成的接枝产物rPP-g-AA只占较少比例。对于异相引发体系： （1）通过红外光谱表征及接枝率计算得出异相引发接枝产物的接枝率比相应的PP/ rPE-g-AA共混物略高；（2）由于rPE及rPE-g-AA对基体PP的结晶没有影响，通过异相引发接枝产物中PP的结晶温度升高直接验证了异相引发接枝反应的实现；（3）提出的机理认为异相引发主要发生在rPE的分子内夺氢并形成rPE-g-AA，造成rPE引发的PP分子间夺氢反应形成PP-g-AA产物的比例下降。 本工作还详细研究了rPP预辐照剂量、rPP用量和单体浓度对均相引发反应的影响。得到的结果如下：（1）高预辐照剂量导致了接枝率下降的“假相”是由于形成的微凝胶造成的；（2）rPP用量的增大在提高接枝率的同时也导致降解反应的逐渐增强；（3）单体浓度的增加导致接枝率的逐步提高并最终达到最大值，而且可能导致部分微凝胶的产生；（4）接枝没有破坏PP-g-AA结晶的完善性和晶型，却能促进了晶体在（040）晶面的生长并可能产生部分横晶形态；（5）PP-g-AA和金属能形成良好的粘接作用。 以上述制备的rPP-g-AA和PP-g-AA增容PP/聚对苯二甲酸丁二醇酯(PBT)共混体系，发现高分子量的PP-g-AA比低分子量的rPP-g-AA的增容效果要好，因此认为PP-g-AA和PBT通过酯化反应形成的长链接枝共聚物PP-g-PBT对PBT相的分散和界面作用增强更加有效。而随着增容剂PP-g-AA比例的增加，原位反应生成的PP-g-PBT逐渐增加，使得PBT相分散和界面增强效果更加显著，因此共混物的力学性能也更佳；DSC研究发现，随着PBT相尺寸减小到1μm以下，PBT出现了结晶受限行为。 将引发剂rPP和单体AA加入到PP/PBT共混体系中实现了一步法反应增容，得到共混物的扭矩、相形态、力学性能都和分步法增容共混物的结果几乎相同，这说明一步法共混能使PBT产生良好分散并得到性能较佳的产物，从而为高分子合金材料制备提供了一种简单有效的方法。 采用该方法对AA、马来酸酐(MAH)和甲基丙烯酸甘油酯(GMA)三种单体的接枝和增容反应对比研究证明，AA的效果最好，MAH次之，而GMA的效果最差，分析认为，AA和MAH通过接枝反应形成PP-g-AA和PP-g-MAH，随后再和PBT发生酯化增容反应形成PP-g-MAH-PBT共聚产物，而GMA首先和PBT反应形成PBT-GMA，而后由长链PBT-GMA发生接枝反应生成PP-g-GMA-g-PBT，但是这种接枝反应的效率很低，由此造成增容效果较差。

人载脂蛋白APOA5的克隆表达纯化及相互作用蛋白研究

人类的载脂蛋白A5（apolipoprotein A5，APOA5）是一个新近发现的载脂蛋白家族成员。它在血浆中的含量比其他载脂蛋白低1-2个数量级，但能显著影响血浆三酰甘油水平，对血脂代谢具有重要意义，可以作为降血脂药物治疗中一个强有力的潜在靶标。 由于APOA5在血浆中含量低，直接从血浆中分离纯化很困难，国内一直没有报道简易可靠的纯化方法。为进一步研究APOA5的生物学特性，探讨其与TG代谢中的其它关键成分之间的相互关系，揭示其在脂类代谢相关疾病中的重要地位，必须有大量的蛋白和抗体用于基础研究。因此本研究首先利用基因工程技术，诱导表达纯化APOA5蛋白，免疫动物制备多克隆抗体，为进一步研究人肝脏细胞中APOA5的相互作用蛋白，研究APOA5蛋白在肝脏细胞中的功能奠定基础。 为了深入研究APOA5在肝脏中如何行使功能，我们采用细菌双杂交技术寻找与APOA5相互作用的蛋白因子。并采用Pull-down技术，免疫荧光及免疫共沉淀技术进一步确证其在体外和体内的相互作用关系，为进一步阐明APOA5在体内的生理功能提供了新的线索。 第一部分 APOA5基因的克隆、原核表达、纯化及其多克隆抗体的制备 本研究首先应用基因克隆技术，从人肝癌细胞系SMMC-7721的cDNA中扩增出1.1 kb的ApoA5基因全长序列。然后将其克隆至表达载体pThioHisD，构建原核表达载体pTH-APOA5。该重组质粒转化至大肠杆菌 BL21（DE3），成功实现人APOA5融合蛋白在大肠杆菌中的表达。经发酵得到高效表达的融合蛋白。 融合蛋白在 IPGT 诱导下以包涵体的形式大量表达。利用融合蛋白上的一段组氨酸序列，用镍离子亲和柱进行纯化和复性后，获得较高纯度的人APOA5融合蛋白。利用该融合蛋白免疫新西兰大耳白兔，获得了高效价的兔抗人APOA5多克隆抗体，Western Blot结果显示此多克隆抗体与APOA5特异性结合。 第二部分 细菌双杂交筛选与APOA5相互作用的蛋白 本实验首先构建了pBT-APOA5重组质粒，经双酶切、PCR和测序鉴定证明重组诱饵质粒构建成功，并进行了表达、自激活鉴定。Western Blot鉴定证实报告菌株中表达了分子量为 68 kD左右的重组融合蛋白，与预测的分子量APOA5（41 kD）/lamda cI （27 kD）一致。自激活实验证明诱饵蛋白不能单独激活报告基因，可用于筛选人肝脏cDNA文库。经过双重抗性筛选和回复筛选，分离出10个阳性克隆。对结果进行生物信息学分析，得到7个与APOA5相互作用的蛋白，其中BI1为细胞凋亡调节因子；ATP6、CYTB、ND2、COX-1为线粒体表达蛋白； ALB、TTR为血清蛋白。 第三部分 APOA5与BI1相互作用的确证 首先构建了BI1的原核表达载体pGEX-5X-3-BI1，利用Pull-down实验检测了APOA5与BI1在体外具有相互作用。然后构建了BI1的真核表达载体pCDNA3.1-HA-BI1和APOA5的真核表达载体pCDNA3.1-APOA5，并验证其表达。通过免疫荧光细胞内共定位研究发现，靶蛋白APOA5主要分布于胞浆，与BI1在HEK293细胞有共定位，即APOA5与BI1存在相互作用的可能。最后利用免疫共沉淀手段，在HEK293细胞中确证了靶蛋白APOA5与BI1在体内的相互作用。 上述研究结果，为深入研究APOA5在体内的生物学功能提供了新的思路。 Apolipoprotein A5 (APOA5) is a newly discovered protein belongs to apolipoprotein family. APOA5’s concentration is 1-2 orders of magnitude lower than other apolipoproteins in the circulation. APOA5 significantly affected plasma triglyceride levels, which is important on lipid metabolism. APOA5 has strong potential to be used as a hypolipidemic drug target. Large amount of APOA5 protein and antibodies are needed in basic research, such as biological characteristics study of the APOA5, its relationship with other key components in TG metabolism, its role played in Lipid metabolism-related diseases. Due to its low concentration in plasma, separation and purification of APOA5 from the plasma is very difficult. Until now no report on simple and reliable method for purification has been published in China. In this study, we firstly got APOA5 recombinant protein using genetic engineering technology. The purified recombinant protein was used to immunize rabbits to get antiserum. It is important for further study of the APOA5 protein-interacting protein. And it lays the foundation for studing APOA5 function in liver. In order to study APOA5 function in liver, we used bacterial two-hybrid technology to find the APOA5 protein interactor. Pull-down, immunofluorescence and immunoprecipitation techniques were used to further confirm the interaction between APOA5 with its interactor in vitro and in vivo. All of these stdudies provided new clues on its physiological functions in vivo. Part I: Cloning, prokaryotic expression, purification and polyclonal antibody preparation of APOA5 First of all, we amplified APOA5 CDS sequence from the human hepatoma cell line SMMC-7721, and subcloned into Expression vector pThioHisD, and got the recombinants named pTH-APOA5. The plasmid was transformed to BL21 (DE3). E. coli BL21(DE3) cells bearing the pTH-APOA5 plasmid were cultured and APOA5 protein synthesis was induced by the addition of IPTG. Recombinant protein was expression in the form of inclusion. Inclusion bodies were dissolved in phosphate-buffered saline containing 8 M urea and 40 mM imidazole, then applied to a Ni2+ affinity column, and were eluted in a buffer containing 4 M urea and 200 mM imidazole. Fractions containing the APOA5 protein were pooled and dialyzed against buffer containing phosphate-buffered saline. Antiserum to recombinant human APOA5 was generated by immuning rabbit. Western Blot showed that this antiserum specific binding with APOA5. Part II Two-hybrid system screening protein interactions with the APOA5 The coding sequence of human APOA5 was amplified using synthetic oligonucleotide primers from pTH-APOA5 vector and was subcloned into the pBT plasmidc to yield pBT-APOA5 vector. DNA sequencing was performed to verify that no unwanted mutations occurred during the process of plasmid vector construction. We verified recombinant protein expression and tested self-activation by pBT-APOA5 prior to screening. Western Blot verified inducing a 68 kD band, consistent with the predicted molecular weight (APOA5 41 kD, lamda cI 27 kD). pBT-APOA5 can be used for screening human liver cDNA library because it can not self-activation. Totally 10 positive clones were isolated. The nucleotide sequence of the positive clones were determined and compared to NCBI nucleotide sequence databases. We got 7 protein which interact with APOA5, included BI1(Apoptosis regulator); ATP6, CYTB, ND2, COX-1(Mitochondrial protein) and ALB, TTR(Serum protein). Part III Confirming of interaction between APOA5 with BI1 pGEX-5X-3-BI1 vector was subcloned at first. Pull-down experiments were used to detect the interaction between APOA5 with BI1 in vitro. Later, pCDNA3.1-HA-BI1 and pCDNA3.1-APOA5 were subcloned. Through immunofluorescence co-localization study, we found APOA5 mainly distributed in the cytoplasm. APOA5 is co-localization with BI1 in HEK293 cells. Finally, we verified interaction between APOA5 with BI1 in vivo through immunoprecipitation.

Thermoplastic Elastomers Based on Compatibilized Poly(butylene terephthalate) Blends: Effect of Functional Groups and Dynamic Curing

Two sets of graft copolymers were prepared by grafting glycidyl methacrylate (GMA) or ally] (3-isocyanate-4-tolyl) carbamate (TAI) onto ethylene/propylene/diene terpolymer (EPDM) in an internal mixer. These graft copolymers were used as the compatibilizer to prepare the thermoplastic elastomers (TPEs) containing 50 wt%, of poly(butylene terephthalate), PBT, 30 wt% of compatibilizer, and 20 wt% of nitrile-butadiene rubber, NBR. The indirect, two-step mixer process was chosen for dynamic curing.

Thermal and mechanical properties of poly(butylene terephthalate)/epoxy blends

In this study, melt blends of poly(butylene terephthalate) (PBT) with epoxy resin were characterized by dynamic mechanical analysis, differential scanning calorimetry, tensile testing, Fourier transform infrared spectroscopy, and wide-angle X-ray diffraction. The results indicate that the presence of epoxy resin influenced either the mechanical properties of the PBT/epoxy blends or the crystallization of PBT. The epoxy resin was completely miscible with the PBT matrix. This was beneficial to the improvement of the impact performance of the PBT/epoxy blends.

Toughening effects of poly(butylene terephthalate) with blocked isocyanate-functionalized poly(ethylene octene)

BACKGROUND: Blocked isocyanate-functionalized polyolefins have great potential for use in semicrystalline polymer blends to obtain toughened polymers. In this study, poly(butylene terephthalate) (PBT) was blended with allyl N-[2-methyl-4-(2-oxohexahydroazepine-1 -carboxamido)phenyl] carbamate-functionalized poly(ethylene octene) (POE-g-AMPC).RESULTS: New peaks at 2272 and 1720 cm(-1), corresponding to the stretching vibrations of NCO and the carbonyl of NH-CO-N, respectively, in AMPC, appeared in the infrared spectrum of POE-g-AMPC. Both rheological and X-ray photoelectron spectroscopy results indicated a new copolymer was formed in the reactive blends. Compared to uncompatibilized PBT/POE blends, smaller dispersed particle sizes with narrower distribution were found in the compatibilized PBT/POE-g-AMPC blends. There was a marked increase in impact strength by about 10-fold over that of PBT/POE blends with the same rubber content and almost 30-fold higher than that of pure PBT when the POE-g-AMPC content was 25 wt%.

Influence of the degree of grafting on the morphology and mechanical properties of blends of poly(butylene terephthalate) and glycidyl methacrylate grafted poly(ethylene-co-propylene) (EPR)

Poly(ethylene-co-propylene) (EPR) was functionalized to varying degrees with glycidyl methacrylate (GMA) by melt grafting processes. The EPR-graft-GMA elastomers were used to toughen poly(butylene terephthalate) (PBT). Results showed that the grafting degree strongly influenced the morphology and mechanical properties of PBT/EPR-graft-GMA blends. Compatibilization reactions between the carboxyl and/or hydroxyl of PBT and epoxy groups of EPR-graft-GMA induced smaller dispersed phase sizes and uniform dispersed phase distributions. However, higher degrees of grafting (>1.3) and dispersed phase contents (>10 wt%) led to higher viscosities and severe crosslinking reactions in PBT/EPR-graft-GMA blends, resulting in larger dispersed domains of PBT blends. Consistent with the change in morphology, the impact strength of the PBT blends increased with the increase in EPR-graft-GMA degrees of grafting for the same dispersion phase content when the degree of grafting was below 1.8. However, PBT/EPR-graft-GMA1.8 displayed much lower impact strength in the ductile region than a comparable PBT/EPR-graft-GMA1.3 blend (1.3 indicates degree of grafting).

Structure-properties relationship in toughening of poly(butylene terephthalate) with core-shell modifier

The performance of acrylonitrile-butadiene-styrene (ABS) core-shell modifier with different grafting degree, acrylonitrile (AN) content, and core-shell ratio in toughening of poly(butylene terephthalate) (PBT) matrix was investigated. Results show PBT/ABS blends fracture in ductile mode when the grafting degree is high, and with the decrease of grafting degree PBT/ABS blends fracture in a brittle way. The surface of rubber particles cannot be covered perfectly for ABS with low grafting degree and agglomeration will take place; on the other hand, the entanglement density between SAN and PBT matrix decreases because of the low grafting degree, inducing poor interfacial adhesion. The compatibility between PBT and ABS results from the strong inter-action between PBT and SAN copolymer and the interaction is influenced by AN content. Results show ABS cannot disperse in PBT matrix uniformly when AN content is zero and PBT/ABS fractures in a brittle way. With the addition of AN in ABS, PBT/ABS blends fracture in ductile mode. The core-shell ratio of ABS copolymers has important effect on PBT/ABS blends.

Effect of the compatibilization of linear low-density polyethylene-g-acrylic acid on the morphology and mechanical properties of poly(butylene terephthalate)/linear low-density polyethylene blends

A poly(butylene terephthalate) (PBT)/linear low-density polyethylene (LLDPE) alloy was prepared with a reactive extrusion method, For improved compatibility of the blending system, LLDPE grafted with acrylic acid (LLDPE-g-AA) by radiation was adopted in place of plain LLDPE. The toughness and extensibility of the PBT/LLDPE-g-AA blends, as characterized by the impact strengths and elongations at break, were much improved in comparison with the toughness and extensibility of the PBT/LLDPE blends at the same compositions. However, there was not much difference in their tensile (or flexural) strengths and moduli. Scanning electron microscopy photographs showed that the domains of PBT/LLDPE-g-AA were much smaller and their dispersions were more homogeneous than the domains and dispersions of the PBT/ T,T PE blends. Compared with the related values of the PBT/LLDPE blends, the contents and melting temperatures of the usual spherulites of PBT in PBT/LLDPE-g-AA decreased.

Toughening of poly(butylene terephthalate) with epoxidized ethylene propylene diene rubber

In this paper, unepoxidized ethylene propylene diene rubber (uEPDM) was first epoxidized with formic acid and H2O2, and then the epoxidized ethylene propylene diene rubber (eEPDM) was melt-mixed with PET resin in a Brabender-like apparatus. Toughening of PET matrix was achieved by this method. The dispersion of rubber particles and phase structure of the blends were also observed by SEM. It has been suggested that the epoxy groups in the eEPDM could react with PET end groups to form a graft copolymer which could act as an interfacial compatibilizer between the PBT matrix and eEPDM rubber dispersed phase. This is beneficial to the improvement of the impact performance of PBT. (C) 1997 Elsevier Science Ltd.

Toughened poly(butylene terephthalate) by epoxided ethylene-propylene-diene-rubber

Blends of poly (butylene terephthalate) (PBT) and epoxided ethylene-propylene-diene terpolymer (EEPDM) were prepared. Their mechanical properties and morphology were studied by Izod impact test machine and scanning electronic microscope respectively, It was found that the notched Izod impact strength of blend PBT/EEPDM was as about 23 times as that of pure PET and about 10 times as that of blend PBT/EPDM at room temperature, The dispersed rubber particles were much smaller and the phase boundary was more blurred in blend PBT/EEPDM than in blend PBT/EPDM. The toughness of blend PBT/EEPDM was much more better than that of blend PET and PBT/EPDM, which was in good agreement with the difference between their morphologies.