Theoretical and numerical analyses of convective instability in porous media with temperature-dependent viscosity

Exact analytical solutions of the critical Rayleigh numbers have been obtained for a hydrothermal system consisting of a horizontal porous layer with temperature-dependent viscosity. The boundary conditions considered are constant temperature and zero vertical Darcy velocity at both the top and bottom of the layer. Not only can the derived analytical solutions be readily used to examine the effect of the temperature-dependent viscosity on the temperature-gradient driven convective flow, but also they can be used to validate the numerical methods such as the finite-element method and finite-difference method for dealing with the same kind of problem. The related analytical and numerical results demonstrated that the temperature-dependent viscosity destabilizes the temperature-gradient driven convective flow and therefore, may affect the ore body formation and mineralization in the upper crust of the Earth. Copyright (C) 2003 John Wiley Sons, Ltd.

Theoretical and numerical analysis of large-scale heat transfer problems with temperature-dependent pore-fluid densities

Purpose - In many scientific and engineering fields, large-scale heat transfer problems with temperature-dependent pore-fluid densities are commonly encountered. For example, heat transfer from the mantle into the upper crust of the Earth is a typical problem of them. The main purpose of this paper is to develop and present a new combined methodology to solve large-scale heat transfer problems with temperature-dependent pore-fluid densities in the lithosphere and crust scales. Design/methodology/approach - The theoretical approach is used to determine the thickness and the related thermal boundary conditions of the continental crust on the lithospheric scale, so that some important information can be provided accurately for establishing a numerical model of the crustal scale. The numerical approach is then used to simulate the detailed structures and complicated geometries of the continental crust on the crustal scale. The main advantage in using the proposed combination method of the theoretical and numerical approaches is that if the thermal distribution in the crust is of the primary interest, the use of a reasonable numerical model on the crustal scale can result in a significant reduction in computer efforts. Findings - From the ore body formation and mineralization points of view, the present analytical and numerical solutions have demonstrated that the conductive-and-advective lithosphere with variable pore-fluid density is the most favorite lithosphere because it may result in the thinnest lithosphere so that the temperature at the near surface of the crust can be hot enough to generate the shallow ore deposits there. The upward throughflow (i.e. mantle mass flux) can have a significant effect on the thermal structure within the lithosphere. In addition, the emplacement of hot materials from the mantle may further reduce the thickness of the lithosphere. Originality/value - The present analytical solutions can be used to: validate numerical methods for solving large-scale heat transfer problems; provide correct thermal boundary conditions for numerically solving ore body formation and mineralization problems on the crustal scale; and investigate the fundamental issues related to thermal distributions within the lithosphere. The proposed finite element analysis can be effectively used to consider the geometrical and material complexities of large-scale heat transfer problems with temperature-dependent fluid densities.

Mechanisms of formation and function of eosinophil lipid bodies: inducible intracellular sites involved in arachidonic acid metabolism

Lipid bodies, inducible lipid-rich cytoplasmic inclusions, are characteristically abundant in cells associated with inflammation, including eosinophils. Here we reviewed the formation and function of lipid bodies in human eosinophils. We now have evidence that the formation of lipid bodies is not attributable to adverse mechanisms, but is centrally mediated by specific signal transduction pathways. Arachidonic acid and other cis fatty acids by an NSAID-inhibitable process, diglycerides, and PAF by a 5-lipoxygenase dependent pathway are potent stimulators of lipid body induction. Lipid body formation develops rapidly by processes that involve PKC, PLC, and de novo mRNA and protein synthesis. These structures clearly serve as repositoires of arachidonyl-phospholipids and are more than inert depots. Specific enzymes, including cytosolic phospholipase A2, MAP kinases, lipoxygenases and cyclooxygenases, associate with lipid bodies. Lipid bodies appear to be dynamic, organelle-like structures involved in intracellular pathways of lipid mobilization and metabolism. Indeed, increases in lipid body numbers correlated with enhanced production of both lipoxygenase- and cyclooxygenase-derived eicosanoids. We hypothesize that lipid bodies are distinct inducible sites for generating eicosanoids as paracrine mediators with varied activities in inflammation. The capacity of lipid body formation to be specifically and rapidly induced in leukocytes enhances eicosanoid mediator formation, and conversely pharmacologic inhibition of lipid body induction represents a potential novel and specific target for anti-inflammatory therapy.

Development of hypogene and supergene alteration and copper mineralization patterns, Sar Cheshmeh porphyry copper deposits, Iran /

The formation of the Sar Cheshmeh porphyry Cu-Mo deposit is related to the culmination of calc-alkaline igneous activity in the Kerman region. The deposit comprises a suite of Late Cenozoic intrusive sub-volcanic and extrusive rocks emplaced into a folded series of Eocene andesitic lavas and pyroclastic sediments. The earliest stage of magmatism was emplacement of a large granodiorite stock about 29 m.y.b.p. This was followed by intrusion of two separate porphyritic bodies at 15 (Sar Cheshrneh porphyry) and 12 m.y.b.p. (Late porphyry) and a series of sub-volcanic dikes between 12 and 9 m.y.b.p. Magmatic activity terminated with multi-phase extrusion of a Pelean dacitic dome complex between 10 and 2.8 m.y.b.p. The country rocks and the earlier porphyritic intrusions are pervasively altered to biotite-rich potassium silicate (metasomatic and hydrothermal) sericite-clay, phyllic and chlorite-clay, argillic assemblages. These grade outwards to an extensive propylitic zone. Within the ore body, the later intra-. and post-mineral dikes only reach the propylitic grade. At least three different sets of quartz veins are present, including a sericite-chlorite-quartz set which locally retrogrades pervasive secondary biotite to sericite. In the hypogene zone, metasomatic and hydrothermal alteration is related to all stages of magmatism but copper mineralization and veining are restricted to a period of 15 to 9 m.y.b.p.related to the early intrusive phases. The copper mineralization and silicate alteration do not fit a simple annular ring model but have been greatly modified by, 1. The existence of an ititial, outer ring, of metasomatic alteration overprinted by an inner.ring of hydrothermal alteration and, 2. later extensive dilating effects of intra- and post-mineral dikes. The hydrothermal clay mineral assemblage in the hypogene zone is illite-chlorite-kaolinite-smectite (beidellite). Preliminary studies indicate that the amount of each of these clays varies vertically and that hydrothermal zonation of clay minerals is possible. However, these minerals alter to illite-kaolinite assemblages in the supergene sulfide zone and to more kaolinite-rich assemblages in the supergene leached zone. Hydrothermal biotite breaks down readily in the supergene zone and is not well preserved in surface outcrops. The distribution of copper minerals in the supergene sulfide enrichment zone is only partly related to rock type being more dependent on topography and the availability of fractures.

Gênese dos corpos de sulfeto maciço hidrotermal e platinóides associados no depósito de Fortaleza de Minas (MG)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Geologia, mineralogia e geoquímica dos fosfatos de Sapucaia (Bonito - PA)

O depósito mineral de Sapucaia, situado no município de Bonito, região nordeste do Estado do Pará, é parte de um conjunto de ocorrências de fosfatos de alumínio lateríticos localizados predominantemente ao longo da zona costeira dos estados do Pará e Maranhão. Estes depósitos foram alvos de estudo desde o início do século passado, quando as primeiras descrições de “bauxitas fosforosas” foram mencionadas na região NW do Maranhão. Nas últimas décadas, com o crescimento acentuado da demanda por produtos fertilizantes pelo mercado agrícola mundial, diversos projetos de exploração mineral foram iniciados ou tiveram seus recursos ampliados no território brasileiro, dentre estes destaca-se a viabilização econômica de depósitos de fosfatos aluminosos, como o de Sapucaia, que vem a ser o primeiro projeto econômico mineral de produção e comercialização de termofosfatos do Brasil. Este trabalho teve como principal objetivo caracterizar a geologia, a constituição mineralógica e a geoquímica do perfil laterítico alumino-fosfático do morro Sapucaia. A macrorregião abrange terrenos dominados em sua maioria por rochas pré-cambrianas a paleozóicas, localmente definidas pela Formação Pirabas, Formação Barreiras, Latossolos e sedimentos recentes. A morfologia do depósito é caracterizada por um discreto morrote alongado que apresenta suaves e contínuos declives em suas bordas, e que tornam raras as exposições naturais dos horizontes do perfil laterítico. Desta forma, a metodologia aplicada para a caracterização do depósito tomou como base o programa de pesquisa geológica executada pela Fosfatar Mineração, até então detentora dos respectivos direitos minerais, onde foram disponibilizadas duas trincheiras e amostras de 8 testemunhos de sondagem. A amostragem limitou-se à extensão litológica do perfil laterítico, com a seleção de 44 amostras em intervalos médios de 1m, e que foram submetidas a uma rota de preparação e análise em laboratório. Em consonância com as demais ocorrências da região do Gurupi, os fosfatos de Sapucaia constituem um horizonte individualizado, de geometria predominantemente tabular, denominado simplesmente de horizonte de fosfatos de alumínio ou crosta aluminofosfática, que varia texturalmente de maciça a cavernosa, porosa a microporosa, que para o topo grada para uma crosta ferroalumino fosfática, tipo pele-de-onça, compacta a cavernosa, composta por nódulos de hematita e/ou goethita cimentados por fosfatos de alumínio, com características similares aos do horizonte de fosfatos subjacente. A crosta aluminofosfática, para a base do perfil, grada para um espesso horizonte argiloso caulinítico com níveis arenosos, que repousa sobre sedimentos heterolíticos intemperizados de granulação fina, aspecto argiloso, por vezes sericítico, intercalados por horizontes arenosos, e que não possuem correlação aparente com as demais rochas aflorantes da geologia na região. Aproximadamente 40% da superfície do morro é encoberta por colúvio composto por fragmentos mineralizados da crosta e por sedimentos arenosos da Formação Barreiras. Na crosta, os fosfatos de alumínio estão representados predominantemente pelo subgrupo da crandallita: i) série crandallita-goyazita (média de 57,3%); ii) woodhouseíta-svanbergita (média de 15,8%); e pela iii) wardita-millisita (média de 5,1%). Associados aos fosfatos encontram-se hematita, goethita, quartzo, caulinita, muscovita e anatásio, com volumes que variam segundo o horizonte laterítico correspondente. Como os minerais pesados em nível acessório a raro estão zircão, estaurolita, turmalina, anatásio, andalusita e silimanita. O horizonte de fosfatos, bem como a crosta ferroalumínio-fosfática, mostra-se claramente rica em P₂O₅, além de Fe₂O₃, CaO, Na₂O, SrO, SO₃, Th, Ta e em terras-raras leves como La e Ce em relação ao horizonte saprolítico. Os teores de SiO₂ são consideravelmente elevados, porém muito inferiores aqueles identificados no horizonte argiloso sotoposto. No perfil como um todo, observa-se uma correlação inversa entre SiO₂ e Al₂O₃; entre Al₂O₃ e Fe₂O₃, e positiva entre SiO₂ e Fe₂O₃, que ratificam a natureza laterítica do perfil. Diferente do que é esperado para lateritos bauxíticos, os teores de P₂O₅, CaO, Na₂O, SrO e SO₃ são fortemente elevados, concentrações consideradas típicas de depósitos de fosfatos de alumínio ricos em crandallita-goyazita e woodhouseítasvanbergita. A sucessão dos horizontes, sua composição mineralógica, e os padrões geoquímicos permitem correlacionar o presente depósito com os demais fosfatos de alumínio da região, mais especificamente Jandiá (Pará) e Trauíra (Maranhão), bem como outros situados além do território brasileiro, indicando portanto, que os fosfatos de alumínio de Sapucaia são produtos da gênese de um perfil laterítico maturo e completo, cuja rocha fonte pode estar relacionada a rochas mineralizadas em fósforo, tais como as observadas na Formação Pimenteiras, parcialmente aflorante na borda da Bacia do Parnaíba. Possivelmente, o atual corpo de minério integrou a paleocosta do mar de Pirabas, uma vez que furos de sondagem às proximidades do corpo deixaram claro a relação de contato lateral entre estas unidades.

The Role of Water Chemistry in the Concentration of Hematite Ore

Selective flocculation and dispersion processes rely on differences in the surface chemistry of fine mineral particles (<25 >ìm) to allow for the concentration of specific minerals from an ore body. The effectiveness of selective flocculation and dispersion processes for the concentration of hematite (Fe2O3) ore are strongly dependent on the ionic content of the process water. The goal of this research was to analyze the ionic content of an operating selective flocculation and dispersion type hematite ore concentrator and determine how carbon dioxide affects the filtration of the final product. A detailed water chemistry analysis of the entire process was determined to show concentration profiles throughout the process. This information was used to explain process phenomena and promote future research into this subject. A subsequent laboratory study was conducted to show how carbon dioxide affects filtration rate and relate this effect to the zeta potential of the constituents of the concentrated hematite ore.

The supergene thorium and rare-earth element deposit at Morro do Ferro, Poços de Caldas, Minas Gerais, Brazil

The thorium and rare-earth element (Th-REE) deposit at Morro do Ferro formed under supergene lateritic weathering conditions. The ore body consists of shallow NW-SE elongated argillaceous lenses that extend from the top of the hill downwards along its south-eastern slope. The deposit is capped by a network of magnetite layers which protected the underlying highly weathered, argillaceous host rock from excessive erosion. The surrounding country rocks comprise a sequence of subvolcanic phonolite intrusions that have been strongly altered by hydrothermal and supergene processes. From petrological, mineralogical and geochemical studies, and mass balance calculations, it is inferred that the highly weathered host rock was originally carbonatitic in composition, initially enriched in Th and REEs compared to the surrounding silicate rocks. The intrusion of the carbonatite caused fenitic alteration in the surrounding phonolites, consisting of early potassic alteration followed by a vein-type Th-REE mineralization with associated fluorite, carbonate, pyrite and zircon. Subsequent weathering has completely decomposed the carbonatite forming a residual supergene enrichment of Th and REEs. Initial weathering of the carbonatite has created a chemical environment that might have been conductive to carbonate and phosphate complexing of the REEs in groundwaters. This may have appreciably restricted the dissolution of primary REE phases. Strongly oxidic weathering has resulted in a fractionation between Ce and the other light rare earth elements (LREEs). Ce3+ is oxidized to Ce4+ and retained together with Th by secondary mineral formation (cerianite, thorianite), and by adsorption on poorly crystalline iron- and aluminium-hydroxides. In contrast, the trivalent LREEs are retained to a lesser degree and are thus more available for secondary mineral formation (Nd-lanthanite) and adsorption at greater depths down the weathering column. Seasonally controlled fluctuations of recharge waters into the weathering column may help to explain the observed repetition of Th-Ce enriched zones underlain by trivalent LREE enriched zones.

A risk assessment for exposure to grunerite asbestos (amosite) in an iron ore mine

The potential for health risks to humans exposed to the asbestos minerals continues to be a public health concern. Although the production and use of the commercial amphibole asbestos minerals—grunerite (amosite) and riebeckite (crocidolite)—have been almost completely eliminated from world commerce, special opportunities for potentially significant exposures remain. Commercially viable deposits of grunerite asbestos are very rare, but it can occur as a gangue mineral in a limited part of a mine otherwise thought asbestos-free. This report describes such a situation, in which a very localized seam of grunerite asbestos was identified in an iron ore mine. The geological occurrence of the seam in the ore body is described, as well as the mineralogical character of the grunerite asbestos. The most relevant epidemiological studies of workers exposed to grunerite asbestos are used to gauge the hazards associated with the inhalation of this fibrous mineral. Both analytical transmission electron microscopy and phase-contrast optical microscopy were used to quantify the fibers present in the air during mining in the area with outcroppings of grunerite asbestos. Analytical transmission electron microscopy and continuous-scan x-ray diffraction were used to determine the type of asbestos fiber present. Knowing the level of the miner’s exposures, we carried out a risk assessment by using a model developed for the Environmental Protection Agency.

U, FE, AND LI ISOTOPE RATIOS IN THE MINERALIZED AND BARREN AREAS OF THE KOMBOLGIE BASIN

The Paleo- to Meso-Proterozoic Jabiluka unconformity related uranium mine is located within the Alligator River Uranium Field, found in the Northern Territories, Australia. The uranium ore is hosted in the late middle Paleoproterozoic Cahill Formation, which is unconformably overlain by a group of unmetamorphosed conglomerates known as the Kombolgie subgroup. The Kombolgie subgroup provided the source for oxidized basinal brines, carrying U as the mobile form U(VI), which interacted with reducing lithologies in the Cahill formation, thus reducing U(VI) to the solid U(IV), and leading to the precipitation of uraninite (UO2). In order to characterize fluid interaction with the ore body and compare that to areas without mineralization, several isotopic tracers were studied on a series of clay samples from drill core at Jabiluka as well as in barren areas throughout the ARUF. Among the potential tracers, three were selected: U (redox sensitive and recent fluid mobilization), Fe (redox sensitive), and Li (fractionated by hydrothermal fluids and adsorption reactions). δ238U values were found to be closely linked to the mineralogy, with samples with higher K/Al ratios (indicating high illite and low chlorite concentrations) having higher δ238U values. This demonstrates that 235U preferentially absorbs onto the surface of chlorite during hydrothermal circulation. In addition, δ234U values lie far from secular equilibrium (δ234U of 30‰), indicating there was addition or removal of 234U from the surface of the samples from recent (<2.5Ma) interactions of mobile fluids. δ57Fe values were found to be related to lithology and spatially to known uranium deposits. Decreasing δ57Fe values were found with increasing depth to the unconformity in a drill hole directly above the ore zone, but not in drill holes in the barren area. Similarly to δ238U, δ7Li is found to correlate with mineralogy, with higher δ7Li values associated with samples with more chlorite. In addition, higher δ7Li values are found at greater depth throughout the basin, indicating that the direction of the mineralizing fluid circulation was upwards from the Cahill formation to the Kombolgie subgroup.

U, FE, AND LI ISOTOPE RATIOS IN THE MINERALIZED AND BARREN AREAS OF THE KOMBOLGIE BASIN

The Paleo- to Meso-Proterozoic Jabiluka unconformity related uranium mine is located within the Alligator River Uranium Field, found in the Northern Territories, Australia. The uranium ore is hosted in the late middle Paleoproterozoic Cahill Formation, which is unconformably overlain by a group of unmetamorphosed conglomerates known as the Kombolgie subgroup. The Kombolgie subgroup provided the source for oxidized basinal brines, carrying U as the mobile form U(VI), which interacted with reducing lithologies in the Cahill formation, thus reducing U(VI) to the solid U(IV), and leading to the precipitation of uraninite (UO2). In order to characterize fluid interaction with the ore body and compare that to areas without mineralization, several isotopic tracers were studied on a series of clay samples from drill core at Jabiluka as well as in barren areas throughout the ARUF. Among the potential tracers, three were selected: U (redox sensitive and recent fluid mobilization), Fe (redox sensitive), and Li (fractionated by hydrothermal fluids and adsorption reactions). δ238U values were found to be closely linked to the mineralogy, with samples with higher K/Al ratios (indicating high illite and low chlorite concentrations) having higher δ238U values. This demonstrates that 235U preferentially absorbs onto the surface of chlorite during hydrothermal circulation. In addition, δ234U values lie far from secular equilibrium (δ234U of 30‰), indicating there was addition or removal of 234U from the surface of the samples from recent (<2.5Ma) interactions of mobile fluids. δ57Fe values were found to be related to lithology and spatially to known uranium deposits. Decreasing δ57Fe values were found with increasing depth to the unconformity in a drill hole directly above the ore zone, but not in drill holes in the barren area. Similarly to δ238U, δ7Li is found to correlate with mineralogy, with higher δ7Li values associated with samples with more chlorite. In addition, higher δ7Li values are found at greater depth throughout the basin, indicating that the direction of the mineralizing fluid circulation was upwards from the Cahill formation to the Kombolgie subgroup.

Frequency of histopathological changes in Howler monkeys ( Alouatta sp.) naturally infected with yellow fever virus in Brazil

Abstract: INTRODUCTION: Due to the importance that Howler monkeys have on the yellow fever (YF) epidemiological sylvatic cycle in Brazil, more accurate morphological diagnostic criteria needs to be established, especially considering the differences that may exist between the genera of Brazilian non-human primates (NHPs) involved in yellow fever virus (YFV) epizootics. METHODS: Records of YF epizootics in NHPs in Brazil between 2007 and 2009 were obtained from the Brazilian Ministry of Health database to select YF positive (n=98) Howler monkeys (Alouatta sp.) for this study. The changes described in the histopathological reports were categorized by organ and their frequencies calculated. RESULTS: The most frequent lesions observed in the animals with YF were hepatocyte apoptosis (Councilman body formation), midzonal hepatocyte necrosis, steatosis, liver hemorrhage, inflammatory mononuclear cell infiltration of the liver, renal acute tubular necrosis and interstitial nephritis. Midzonal hepatocyte necrosis, steatosis and hemorrhage presented positive correlations with apoptosis of hepatocytes, suggesting strong YFV pathogenic effect association; they were also the main histopathological changes in the Alouatta sp. A pronounced negative correlation between apoptosis of hepatocytes and hepatic mononuclear cell infiltration pointed to significant histopathological differences between YFV infection in Howler monkeys and humans. CONCLUSIONS: The results warn that NHPs may exhibit different response patterns following YFV infection and require a more careful diagnosis. Presumptive diagnosis based on primate histopathological lesions may contribute to public health service control.

Genetic and hormonal regulation of cambial development.

The stems and roots of most dicot plants increase in diameter by radial growth, due to the activity of secondary meristems. Two types of meristems function in secondary plant body formation: the vascular cambium, which gives rise to secondary xylem and phloem, and the cork cambium, which produces a bark layer that replaces the epidermis and protects the plant stem from mechanical damage and pathogens. Cambial development, the initiation and activity of the vascular cambium, leads to an accumulation of wood, the secondary xylem tissue. The thick, cellulose-rich cell walls of wood provide a source of cellulose and have the potential to be used as a raw material for sustainable and renewable energy production. In this review, we will discuss what is known about the mechanisms regulating the cambium and secondary tissue development.

Cell differentiation to "mating bodies" induced by an integrating and conjugative element in free-living bacteria.

Lateral gene transfer (LGT) is one of the most important processes leading to prokaryotic genome innovation. LGT is typically associated with conjugative plasmids and bacteriophages, but recently, a new class of mobile DNA known as integrating and conjugative elements (ICE) was discovered, which is abundant and widespread among bacterial genomes. By studying at the single-cell level the behavior of a prevalent ICE type in the genus Pseudomonas, we uncover the remarkable way in which the ICE orchestrates host cell differentiation to ensure horizontal transmission. We find that the ICE induces a state of transfer competence (tc) in 3%-5% of cells in a population under nongrowing conditions. ICE factors control the development of tc cells into specific assemblies that we name "mating bodies." Interestingly, cells in mating bodies undergo fewer and slower division than non-tc cells and eventually lyse. Mutations in ICE genes disrupting mating-body formation lead to 5-fold decreased ICE transfer rates. Hence, by confining the tc state to a small proportion of the population, ICE horizontal transmission is achieved with little cost in terms of vertical transmission. Given the low transfer frequencies of most ICE, we anticipate regulation by subpopulation differentiation to be widespread.

Determination of four sequential stages during microautophagy in vitro.

Microautophagy is the transfer of cytosolic components into the lysosome by direct invagination of the lysosomal membrane and subsequent budding of vesicles into the lysosomal lumen. This process is topologically equivalent to membrane invagination during multivesicular body formation and to the budding of enveloped viruses. Vacuoles are lysosomal compartments of yeasts. Vacuolar membrane invagination can be reconstituted in vitro with purified yeast vacuoles, serving as a model system for budding of vesicles into the lumen of an organelle. Using this in vitro system, we defined different reaction states. We identified inhibitors of microautophagy in vitro and used them as tools for kinetic analysis. This allowed us to characterize four biochemically distinguishable steps of the reaction. We propose that these correspond to sequential stages of vacuole invagination and vesicle scission. Formation of vacuolar invaginations was slow and temperature-dependent, whereas the final scission of the vesicle from a preformed invagination was fast and proceeded even on ice. Our observations suggest that the formation of invaginations rather than the scission of vesicles is the rate-limiting step of the overall reaction.