Estudo de retardantes de chama, isentes de halogéneos, em espumas de poliuretano monocomponente

Estágio de natureza profissional para obtenção do grau de Mestre em Engenharia Química

Liquid-vapor interfaces of patchy colloids

We investigate the liquid-vapor interface of a model of patchy colloids. This model consists of hard spheres decorated with short-ranged attractive sites ("patches") of different types on their surfaces. We focus on a one-component fluid with two patches of type A and nine patches of type B (2A9B colloids), which has been found to exhibit reentrant liquid-vapor coexistence curves and very low-density liquid phases. We have used the density-functional theory form of Wertheim's first-order perturbation theory of association, as implemented by Yu and Wu [J. Chem. Phys. 116, 7094 (2002)], to calculate the surface tension, and the density and degree of association profiles, at the liquid-vapor interface of our model. In reentrant systems, where AB bonds dominate, an unusual thickening of the interface is observed at low temperatures. Furthermore, the surface tension versus temperature curve reaches a maximum, in agreement with Bernardino and Telo da Gama's mesoscopic Landau-Safran theory [Phys. Rev. Lett. 109, 116103 (2012)]. If BB attractions are also present, competition between AB and BB bonds gradually restores the monotonic temperature dependence of the surface tension. Lastly, the interface is "hairy," i.e., it contains a region where the average chain length is close to that in the bulk liquid, but where the density is that of the vapor. Sufficiently strong BB attractions remove these features, and the system reverts to the behavior seen in atomic fluids.

La biblioteca recombinada: portals i persones

Aquest article explora el disseny i l'ús dels portals en un entorn bibliotecari. Tracta les motivacions per construir portals, així com l'estructura i la tipologia d'aquests. A més, examina l'entorn de l'usuari en què es desenvolupen aquests portals. També argumenta que aporten serveis útils d'integració i presentació, però que s'han de considerar com a component d'un conjunt de serveis més ampli que la biblioteca està construint per tal d'introduir aquests recursos útils als usuaris. Així mateix, considera breument els serveis que els portals ofereixen: consulta distribuïda o metacerca, personalització, demandes, resolució OpenURL, avisos, etc. També considera l'emergent necessitat de serveis de directori o de registre per a coses com la descripció de col·leccions i serveis, dades de drets i polítiques, etc. Tracta l'impacte dels serveis web i el canvi en els models d'investigació i aprenentatge en relació al subministrament i ús d'informació en xarxa. Finalment, considera els serveis bibliotecaris com a part d'un entorn de sistemes, cada vegada més ric, que inclou els sistemes de gestió d'aprenentatge i de programari educatiu, portals de campus, serveis compartits com l'autenticació, i altres sistemes i serveis.

NALP3 is not necessary for early protection against experimental tuberculosis.

In vitro, Toll-like receptors (TLR)2, 4 and 9 as well as NOD-like receptor 2 critically determine macrophage responses to Mycobacterium tuberculosis (Mtb) infection. However, in low-dose experimental murine tuberculosis, single or multiple deficiencies in TLRs 2, 4, 9 or NOD2 have little, if any, impact on early mycobacterial growth containment, granuloma formation and survival. Here, we analyzed the relevance of NALP3, one component of the danger-signaling inflammasome, for (i) Mtb-induced cytokine secretion in vitro and in vivo, (ii) restriction of Mtb replication in infected organs and (iii) granuloma formation. In the absence of functional NALP3, there was no IL-1beta and IL-18 production in Mtb-infected dendritic cells and macrophages in vitro, whereas secretion of IL-1alpha, IL-12p40 and TNF remained unaffected. After three weeks of infection, NALP3-deficient as well as IL-18-deficient mice were as capable as wildtype mice of restricting Mtb loads at a plateau level within well-differentiated granulomas. In conclusion, despite its involvement in cytokine processing, NALP3 is not essential for induction of protective immunity to Mtb.

Effect of testosterone on immunocompetence, parasite load, and metabolism in the common wall lizard (Podarcis muralis)

Testosterone can benefit individual fitness by increasing ornament colour, aggressiveness, and sperm quality, but it can also impose both metabolic and immunological costs. However, evidence that testosterone causes immuno suppression in freely living populations is scant. We studied the effects of testosterone on one component of the immune system (i.e., the cell-mediated response to phytohaemagglutinin), parasite load, and metabolic rate in the common wall lizard, Podarcis muralis (Laurenti, 1768). For analyses of immunocompetence and parasitism, male lizards were implanted at the end of the breeding season with either empty or testosterone implants and were returned to their site of capture for 5-6 weeks before recapture. For analyses of the effects of testosterone on metabolic rate, male lizards were captured and implanted before hibernation and were held in the laboratory for 1 week prior to calorimetry. Experimental treatment with testosterone decreased the cell-mediated response to the T-cell mitogen phytohemagglutinin and increased mean metabolic rate. No effects of testosterone on the number of ectoparasites, hemoparasites, and resting metabolic rate could be detected. These results are discussed in the framework of the immunocompetence handicap hypothesis and the immuno-redistribution process hypothesis. [Authors]

Organizational form and business performance

This project deals with the generation of profitability and the distribution of its benefits. Inspired by Davis (1947, 1955), we define profitability as the ratio of revenue to cost. Profitability is not as popular a measure of business financial performance as profit, the difference between revenue and cost. Regardless of its popularity, however, profitability is surely a useful financial performance measure. Our primary objective in this project is to identify the factors that generate change in profitability. One set of factors, which we refer to as sources, consists of changes in quantities and prices of outputs and inputs. Individual quantity changes aggregate to the overall impact of quantity change on profitability change, which we call productivity change. Individual price changes aggregate to the overall impact of price change on profitability change, which we call price recovery change. In this framework profitability change consists exclusively of productivity change and price recovery change. A second set of factors, which we refer to as drivers, consists of phenomena such as technical change, change in the efficiency of resource allocation, and the impact of economies of scale. The ability of management to harness these factors drives productivity change, which is one component of profitability change. Thus the term sources refers to quantities and prices of individual outputs and inputs, whose changes influence productivity change or price recovery change, either of which influences profitability change. The term drivers refers to phenomena related to technology and management that influence productivity change (but not price recovery change), and hence profitability change.

Comparison of copper-67- and iodine-125-labeled anti-CEA monoclonal antibody biodistribution in patients with colorectal tumors.

Copper-67 has comparable beta-particle emissions to that of 131I, but it displays more favorable gamma emission characteristics for application in radioimmunotherapy (RIT). This study investigates the potential of 67Cu-labeled monoclonal antibody (MAb) 35 for RIT of colorectal carcinoma. METHODS: Biokinetics of simultaneously injected 67Cu- and 125I-labeled MAb35 were studied in six patients scheduled for surgery of primary colorectal cancer. RESULTS: Whole-body clearance (T 1/2) of 67Cu, estimated from sequential anterior and posterior whole-body scans and corrected for decay of 67Cu, was 41 hr. Serum clearance of 67Cu was faster (27.41 hr) than that of 125I (38.33 hr). Mean tumor uptake of the 67Cu-labeled compound (0.0133% ID/g) exceeded that of 125I (0.0095% ID/g), and tumor-to-blood ratios were higher for 67Cu than for 125I, with averages of 6.07 and 2.41, respectively. The average 67Cu/125I ratio was 1.9 for tumor uptake, 0.7 for blood and 2.6 for tumor-to-blood ratios. Nonspecific liver uptake of 67Cu as calculated from whole-body scans was high in four patients, up to 25% of residual whole-body activity at 48 hr, but did not increase with time. We also observed some nonspecific bowel activity, as well as moderate to high uptake in benign polyps. CONCLUSION: Copper-67-labeled MAb35 is more favorable than its radioiodine-labeled counterpart for RIT of colorectal carcinoma due to higher tumor-to-blood ratios, but the problem of nonspecific liver and bowel uptake must first be overcome. The absolute accumulation of activity in tumor remains low, however, so the probability of cure with this compound alone is questionable. The use of 67Cu as one component of a multimodality adjuvant treatment seems to remain the most appropriate application for RIT.

Comparing correspondence analysis and the log-ratio alternative for representing categorical data

We compare correspondance análisis to the logratio approach based on compositional data. We also compare correspondance análisis and an alternative approach using Hellinger distance, for representing categorical data in a contingency table. We propose a coefficient which globally measures the similarity between these approaches. This coefficient can be decomposed into several components, one component for each principal dimension, indicating the contribution of the dimensions to the difference between the two representations. These three methods of representation can produce quite similar results. One illustrative example is given

Effects of the social environment on the survival and fungal resistance of ant brood

The phenotype of social animals can be influenced by genetic, maternal and environmental effects, which include social interactions during development. In social insects, the social environment and genetic origin of brood can each influence a whole suite of traits, from individual size to caste differentiation. Here, we investigate to which degree the social environment during development affects the survival and fungal resistance of ant brood of known maternal origin. We manipulated one component of the social environment, the worker/brood ratio, of brood originating from single queens of Formica selysi. We monitored the survival of brood and measured the head size and ability to resist the entomopathogenic fungus Beauveria bassiana of the resulting callow workers. The worker/brood ratio and origin of eggs affected the survival and maturation time of the brood and the size of the resulting callow workers. The survival of the callow workers varied greatly according to their origin, both in controls and when challenged with B. bassiana. However, there was no interaction between the fungal challenge and either the worker/brood ratio or origin of eggs, suggesting that these factors did not affect parasite resistance in the conditions tested. Overall, the social conditions during brood rearing and the origin of eggs had a strong impact on brood traits that are important for fitness. We detected a surprisingly large amount of variation among queens in the survival of their brood reared in standard queenless conditions, which calls for further studies on genetic, maternal and social effects influencing brood development in the social insects.

Combined Electrostatic and Covalent Polymer Networks for Cell Microencapsulation

Two types of hydrogel microspheres have been developed. Fast ionotropic gelation of sodium alginate (Na-alg) in the presence of calcium ions was combined with slow covalent cross-linking of poly(ethylene glycol) (PEG) derivatives. For the first type, the fast obtainable Ca-alg hydrogel served as spherical matrix for the simultaneously occurring covalent cross-linking of multi-arm PEG derivative. A two-component interpenetrating network was formed in one step upon extruding the mixture of the two polymers into the gelation bath. For the second type, heterobifunctional PEG was grafted onto Na-alg prior to gelation. Upon extrusion of the polymer solution into the gelation bath, fast Ca-alg formation ensured the spherical shape and was accompanied by cross-linker-free covalent cross-linking of the PEG side chains. Thus, one-component hydrogel microspheres resulted. We present the physical properties of the hydrogel microspheres and demonstrate the feasibility of cell microencapsulation for both types of polymer networks.

Salmonella virulence factor SipB induces activation and release of IL-18 in human dendritic cells.

Interleukin-18 (IL-18) plays an important role in innate and acquired immunity, in particular against intracellular pathogens. However, little is known about the microbial factors that trigger IL-18 secretion by dendritic cells (DCs). To determine the influence of bacterial virulence factors on the activation and release of IL-18, we infected human monocyte-derived DCs with virulence mutants of the facultative intracellular pathogen Salmonella typhimurium. Our results show that infection by S. typhimurium causes caspase-1-dependent activation of IL-18 and triggers the release of IL-18 in human DCs. The secretion of IL-18 by the DCs was closely correlated with the ability of the S. typhimurium strains to induce apoptosis. We demonstrate that activation and release of IL-18 are blocked by mutations in the Salmonella sipB gene, which encodes a virulence factor that activates caspase-1 to induce apoptosis. These findings indicate that the activation and release of IL-18 induced by bacterial virulence factors may represent one component of innate immunity against the intracellular bacteria.

Collective dynamic properties in simple crystals: Influence of the structural disorder

Collective dynamic properties in Lennard-Jones crystals are investigated by molecular dynamics simulation. The study is focused on properties such as the dynamic structure factors, the longitudinal and transverse currents and the density of states. The influence on these properties of the structural disorder is analyzed by comparing the results for one-component crystals with those for liquids and supercooled liquids at analogous conditions. The effects of species-disorder on the collective properties of binary crystals are also discussed.

Liquid-liquid phase transition for soft-core attractive potential

Using event-driven molecular dynamics simulations, we study a three-dimensional one-component system of spherical particles interacting via a discontinuous potential combining a repulsive square soft core and an attractive square well. In the case of a narrow attractive well, it has been shown that this potential has two metastable gas-liquid critical points. Here we systematically investigate how the changes of the parameters of this potential affect the phase diagram of the system. We find a broad range of potential parameters for which the system has both a gas-liquid critical point C1 and a liquid-liquid critical point C2. For the liquid-gas critical point we find that the derivatives of the critical temperature and pressure, with respect to the parameters of the potential, have the same signs: they are positive for increasing width of the attractive well and negative for increasing width and repulsive energy of the soft core. This result resembles the behavior of the liquid-gas critical point for standard liquids. In contrast, for the liquid-liquid critical point the critical pressure decreases as the critical temperature increases. As a consequence, the liquid-liquid critical point exists at positive pressures only in a finite range of parameters. We present a modified van der Waals equation which qualitatively reproduces the behavior of both critical points within some range of parameters, and gives us insight on the mechanisms ruling the dependence of the two critical points on the potential¿s parameters. The soft-core potential studied here resembles model potentials used for colloids, proteins, and potentials that have been related to liquid metals, raising an interesting possibility that a liquid-liquid phase transition may be present in some systems where it has not yet been observed.

Contrasts in Areas of Rubber Tree Clones in Regard to Soil and Biomass Carbon Stocks

ABSTRACT Rubber tree (Hevea brasiliensis) crop may accumulate significant amounts of carbon either in biomass or in the soil. However, a comprehensive understanding of the potential of the C stock among different rubber tree clones is still distant, since clones are typically developed to exhibit other traits, such as better yield and disease tolerance. Thus, the aim of this study was to address differences among different areas planted to rubber clones. We hypothesized that different rubber tree clones, developed to adapt to different environmental and biological constrains, diverge in terms of soil and plant biomass C stocks. Clones were compared in respect to soil C stocks at four soil depths and the total depth (0.00-0.05, 0.05-0.10, 0.10-0.20, 0.20-0.40, and 0.00-0.40 m), and in the different compartments of the tree biomass. Five different plantings of rubber clones (FX3864, FDR 5788, PMB 1, MDX 624, and CDC 312) of seven years of age were compared, which were established in a randomized block design in the experimental field in Rio de Janeiro State. No difference was observed among plantings of rubber tree clones in regard to soil C stocks, even considering the total stock from 0.00-0.40 m depth. However, the rubber tree clones were different from each other in terms of total plant C stocks, and this contrast was predominately due to only one component of the total C stock, tree biomass. For biomass C stock, the MDX 624 rubber tree clone was superior to other clones, and the stem was the biomass component which most accounted for total C biomass. The contrast among rubber clones in terms of C stock is mainly due to the biomass C stock; the aboveground (tree biomass) and the belowground (soil) compartments contributed differently to the total C stock, 36.2 and 63.8 %, respectively. Rubber trees did not differ in relation to C stocks in the soil, but the right choice of a rubber clone is a reliable approach for sequestering C from the air in the biomass of trees.

Effect of soil management on the white grub population and damage in soybean

To evaluate the effect of soil management systems on population of white grubs, (Phyllophaga cuyabana Moser), and on its damage in soybean, experiments were set up under no-tillage and conventional tillage (one disk plow, and a leveling disk harrow) areas. Primary tillage equipment, used in other soil management systems, such as moldboard plow, disk plow, chisel plow and heavy duty disk harrow were also tested. Fluctuation of P. cuyabana population and the extent of its damage to soybean was similar under no-tillage and conventional tillage systems. Results comparing a range of primary tillage equipment showed that it affected soil insect populations differently, depending on the time during the season in which tillage was executed. Larval mortality could mostly be attributed to their exposure to adverse factors, soon after tillage, than to changes in soil conditions. Reduction of white grub population was more evident in plots managed by heavier equipment, such as the moldboard plow. Soil tillage could be one component within the soil pest management system in soybean, however, its use can not be generalized.