Non-conventional vortex configurations in a mesoscopic flat disk

The influence of superficial defects on the vortex configurations of a thin superconducting disk is investigated within the time dependent Ginzburg-Landau formalism. The free energy, magnetization, vorticity, and the Cooper pair density are calculated for both metastable and stable vortex configurations and different number of defects on its surface in the presence of an external magnetic field applied perpendicular to the disk area. We show that the competition between the confinement geometry and the geometric position of the defects leads to non-conventional vortex configurations which are not compatible with the symmetry of the sample geometry.

Non-conventional cement-based composites reinforced with vegetable fibers: a review of strategies to improve durability

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nano-fabrication of complex functional structures using non- conventional lithography

In Chapter 1 I will present a brief introduction on the state of art of nanotechnologies, nanofabrication techniques and unconventional lithography as a technique to fabricate the novel electronic device as resistive switch so-called memristor is shown. In Chapter 2 a detailed description of the main fabrication and characterization techniques employed in this work is reported. Chapter 3 parallel local oxidation lithography (pLOx) describes as a main technique to obtain accurate patterning process. All the effective parameters has been studied and the optimized condition observed to highly reproducible with excellent patterned nanostructures. The effect of negative bias, calls local reduction (LR) studied. Moreover, the use of AC bias shows faster patterning process respect to DC bias. In Chapter 4 (metal/ e-SiO2/ Si nanojunction) it is shown how the electrochemical oxide nanostructures by using pLOx can be used in the fabrication of novel devices call memristor. We demonstrate a new concept, based on conventional materials, where the lifetime problem is resolved by introducing a “regeneration” step, which restores the nano-memristor to its pristine condition by applying an appropriate voltage cycle. In Chapter 5 (Graphene/ e-SiO2/ Si), Graphene as a building block material is used as an electrode to selectively oxidize the silicon substrate by pLOx set up for the fabrication of novel resistive switch device. In Chapter 6 (surface architecture) I will show another application of pLOx in biotechnology is shown. So the surface functionalization combine with nano-patterning by pLOx used to design a new surface to accurately bind biomolecules with the possibility of studying those properties and more application in nano-bio device fabrication. So, in order to obtain biochips, electronic and optical/photonics devices Nano patterning of DNA used as scaffolds to fabricate small functional nano-components.

Assimilation of data from conventional and non conventional networks through a LETKF scheme in the COSMO model

The present work studies a km-scale data assimilation scheme based on a LETKF developed for the COSMO model. The aim is to evaluate the impact of the assimilation of two different types of data: temperature, humidity, pressure and wind data from conventional networks (SYNOP, TEMP, AIREP reports) and 3d reflectivity from radar volume. A 3-hourly continuous assimilation cycle has been implemented over an Italian domain, based on a 20 member ensemble, with boundary conditions provided from ECMWF ENS. Three different experiments have been run for evaluating the performance of the assimilation on one week in October 2014 during which Genova flood and Parma flood took place: a control run of the data assimilation cycle with assimilation of data from conventional networks only, a second run in which the SPPT scheme is activated into the COSMO model, a third run in which also reflectivity volumes from meteorological radar are assimilated. Objective evaluation of the experiments has been carried out both on case studies and on the entire week: check of the analysis increments, computing the Desroziers statistics for SYNOP, TEMP, AIREP and RADAR, over the Italian domain, verification of the analyses against data not assimilated (temperature at the lowest model level objectively verified against SYNOP data), and objective verification of the deterministic forecasts initialised with the KENDA analyses for each of the three experiments.

Effectiveness of non-conventional methods for accelerated orthodontic tooth movement: a systematic review and meta-analysis.

OBJECTIVES To assess the available evidence on the effectiveness of accelerated orthodontic tooth movement through surgical and non-surgical approaches in orthodontic patients. METHODS Randomized controlled trials and controlled clinical trials were identified through electronic and hand searches (last update: March 2014). Orthognathic surgery, distraction osteogenesis, and pharmacological approaches were excluded. Risk of bias was assessed using the Cochrane risk of bias tool. RESULTS Eighteen trials involving 354 participants were included for qualitative and quantitative synthesis. Eight trials reported on low-intensity laser, one on photobiomodulation, one on pulsed electromagnetic fields, seven on corticotomy, and one on interseptal bone reduction. Two studies on corticotomy and two on low-intensity laser, which had low or unclear risk of bias, were mathematically combined using the random effects model. Higher canine retraction rate was evident with corticotomy during the first month of therapy (WMD=0.73; 95% CI: 0.28, 1.19, p<0.01) and with low-intensity laser (WMD=0.42mm/month; 95% CI: 0.26, 0.57, p<0.001) in a period longer than 3 months. The quality of evidence supporting the interventions is moderate for laser therapy and low for corticotomy intervention. CONCLUSIONS There is some evidence that low laser therapy and corticotomy are effective, whereas the evidence is weak for interseptal bone reduction and very weak for photobiomodulation and pulsed electromagnetic fields. Overall, the results should be interpreted with caution given the small number, quality, and heterogeneity of the included studies. Further research is required in this field with additional attention to application protocols, adverse effects, and cost-benefit analysis. CLINICAL SIGNIFICANCE From the qualitative and quantitative synthesis of the studies, it could be concluded that there is some evidence that low laser therapy and corticotomy are associated with accelerated orthodontic tooth movement, while further investigation is required before routine application.

Non-conventional provisions in regional trade agreements : do they enhance international trade?

The scope of recent regional trade agreements (RTAs) is becoming much wider in terms of including several provisions such as competition policy or intellectual property. This paper empirically examines how far advanced, non-conventional provisions in RTAs increase trade values among RTA member countries, by estimating the gravity equation with more disaggregated indicators for RTAs. As a result, we find that the provision on competition policy has the largest impacts on trade values, following that on government procurement. Our further analysis reveals that the more significant roles of these two provisions can be also observed in the impacts on the intensive and extensive margins.

System operational costs reduction with non-conventional reactive power sources

Wind energy installations are increasing in power systems worldwide and wind generation capacity tends to be located some distance from load centers. A conflict may arise at times of high wind generation when it becomes necessary to curtail wind energy in order to maintain conventional generators on-line for the provision of voltage control support at load centers. Using the island of Ireland as a case study and presenting commercially available reactive power support devices as possible solutions to the voltage control problems in urban areas, this paper explores the reduction in total generation costs resulting from the relaxation of the operational constraints requiring conventional generators to be kept on-line near load centers for reactive power support. The paper shows that by 2020 there will be possible savings of 87€m per annum and a reduction in wind curtailment of more than a percentage point if measures are taken to relax these constraints.

Non-conventional advertising formats in television versus spots: An analysis based on the generated recall

Advertising investment and audience figures indicate that television continues to lead as a mass advertising medium. However, its effectiveness is questioned due to problems such as zapping, saturation and audience fragmentation. This has favoured the development of non-conventional advertising formats. This study provides empirical evidence for the theoretical development. This investigation analyzes the recall generated by four non-conventional advertising formats in a real environment: short programme (branded content), television sponsorship, internal and external telepromotion versus the more conventional spot. The methodology employed has integrated secondary data with primary data from computer assisted telephone interviewing (CATI) were performed ad-hoc on a sample of 2000 individuals, aged 16 to 65, representative of the total television audience. Our findings show that non-conventional advertising formats are more effective at a cognitive level, as they generate higher levels of both unaided and aided recall, in all analyzed formats when compared to the spot.

Ethanol production from brown seaweed using non-conventional yeasts

The use of macroalgae (seaweed) as a potential source of biofuels has attracted considerable worldwide interest. Since brown algae, especially the giant kelp, grow very rapidly and contain considerable amounts of polysaccharides, coupled with low lignin content, they represent attractive candidates for bioconversion to ethanol through yeast fermentation processes. In the current study, powdered dried seaweeds (Ascophylum nodosum and Laminaria digitata) were pre-treated with dilute sulphuric acid and hydrolysed with commercially available enzymes to liberate fermentable sugars. Higher sugar concentrations were obtained from L. digitata compared with A. nodosum with glucose and rhamnose being the predominant sugars, respectively, liberated from these seaweeds. Fermentation of the resultant seaweed sugars was performed using two non-conventional yeast strains: Scheffersomyces (Pichia) stipitis and Kluyveromyces marxianus based on their abilities to utilise a wide range of sugars. Although the yields of ethanol were quite low (at around 6 g/L), macroalgal ethanol production was slightly higher using K. marxianus compared with S. stipitis. The results obtained demonstrate the feasibility of obtaining ethanol from brown algae using relatively straightforward bioprocess technology, together with non-conventional yeasts. Conversion efficiency of these non-conventional yeasts could be maximised by operating the fermentation process based on the physiological requirements of the yeasts.

A non-conventional five piston double.-acting Stirling Engine filling system CFD simulation and experimental validation

Análisis mediante CFD y validación experimental de un sistema de carga para un motor Stirling. Validado y analizado experimentalmente en un motor de 5 pistones de doble acción.

Genetic and process engineering approaches for improving lipid productivity in the non-conventional oleaginous yeast Cutaneotrichosporon oleaginosus

Gli oli microbici stanno ricevendo sempre più attenzioni come possibile alternativa agli oli vegetali, nel processo di sostituzione dei combustibili fossili. Tuttavia, diversi aspetti necessitano di essere ottimizzati al fine di ottenere oli economicamente competitivi e con caratteristiche chimico-fisiche desiderate. In questa ricerca, sono stati utilizzati due differenti approcci per poter realizzare l’obiettivo preposto. Il primo, si è basato sull’ingegnerizzazione genetica del lievito C. oleaginous, al fine di incrementare la produttività di lipidi e modificare la composizione dei trigliceridi (TAG) sintetizzati. Un protocollo basato su una trasformazione genetica mediata da Agrobacterium è stato utilizzato per sovraesprimere la diacilglicerol trasnferasi (DGA1), l’enzima responsabile dell’ultimo step della sintesi dei TAG, e la Δ9-desaturasi, l’enzima che catalizza la conversione dell’acido stearico (C18:0) in acido oleico (C18:1). La selezione di colonie positive e l’analisi dei mutanti ottenuti ha confermato la buona riuscita della trasformazione. Il secondo approccio ha mirato a studiare l’influenza sulla crescita e sul profilo di lipidi accumulati da C. oleaginous da parte di diversi acidi grassi volatili (VFAs), una materia prima ottenibile da trattamenti di scarti industriali. A questo proposito, sono state utilizzate fermentazioni fed-batch su scala da 1-L basate su glucosio e miscele sintetiche di acido acetico e di VFAs come fonte di carbonio. L’utilizzo simultaneo di acido acetico e acidi secondari ha mostrato come sia possibile stimolare il metabolismo microbico al fine di incrementare l'accumulo di oli e ottenere una composizione chimica lipidica desiderata.

Non conventional species as monitor of environmental pollution

This thesis collects several ecotoxicological studies focused on the quali- quantitative analysis of several classes of chemical compounds. Our studies have been conducted on different aquatic species occupying different food chain trophic levels and characterized by differences in biology, ethology, and nutrition, but all considered excellent bioindicators. This choice allowed us to have a broad overview of the contamination of aquatic environments. Detrimental effects of several chemical compounds on the species investigated have been discussed, considering the economic and public health implications linked to the pollution of the environment and the exposure to old and emerging xenobiotics. Our studies underline the importance of a multidisciplinary and integrated approach that includes the application of the one health concept to ensure the protection of public health and respect for natural environments. Studies collected in this thesis also aim to overcome some critical limitations of the branch of ecotoxicology, such as the lack of standardization in laboratory methods. Our data also underline the importance of expanding research to a greater number of various biological matrices than those indicated by the literature as target tissues for specific pollutants. This condition enables more detailed information on the kinetics of xenobiotics in animal organisms. Our studies also allow us to expand the knowledge related to the mechanisms of synergy and antagonism of mixtures of pollutants that can simultaneously accumulate in wildlife.

La exploración y producción de hidrocarburos en yacimientos no convencionales, frente a los principios de prevención, precaución y desarrollo sostenible

El presente trabajo de grado busca exponer el panorama actual de la exploración y producción de hidrocarburos en Yacimientos No Convencionales, realizada utilizando el fracturamiento hidráulico – Fracking – cómo método para lograr mejores condiciones físicas en el reservorio que permitan la extracción del recurso. El método mencionado es estudiado a la luz de los principios de prevención, precaución y desarrollo sostenible, que rigen la política ambiental en Colombia, con el objetivo de analizar los posibles impactos ambientales y sociales que se puedan generar por el desarrollo de la actividad extractiva de hidrocarburos en Yacimientos No Convencionales. Para finalmente mostrar que el Fracking como actividad está legalmente permitida en Colombia, y la legislación vigente responde a los principios mencionados previamente.

Immune responses to airborne fungi and non-invasive airway diseases.

Inhalation of fungal particles is a ubiquitous way of exposure to microorganisms during human life; however, this exposure may promote or exacerbate respiratory diseases only in particular exposure conditions and human genetic background. Depending on the fungal species and form, fungal particles can induce symptoms in the lung by acting as irritants, aeroallergens or pathogens causing infection. Some thermophilic species can even act in all these three ways (e.g. Aspergillus, Penicillium), mesophilic species being only involved in allergic and/or non-allergic airway diseases (e.g. Cladosporium, Alternaria, Fusarium). The goal of the present review is to present the current knowledge on the interaction between airborne fungal particles and the host immune system, to illustrate the differences of immune sensing of different fungal species and to emphasise the importance of conducting research on non-conventional mesophilic fungal species. Indeed, the diversity of fungal species we inhale and the complexity of their composition have a direct impact on fungal particle recognition and immune system decision to tolerate or respond to those particles, eventually leading to collateral damages promoting airway pathologies.