Growth and production of Nile tilapia (Oreochromis niloticus Lin.) in irrigated Boro rice under floodplain environment

The experiment was conducted at BRRI Regional Station, Habiganj during 1994-95 to evaluate the growth and economic performance of Nile tilapia, Oreochromis niloticus, fish reared in the field of irrigated boro rice with different fertilizer levels. Grain yield of rice was not affected by fish culture. It was observed that 50% of recommended fertilizer was enough to produce increased rice yield (8-10 t/ha) at floodplain environment and additional yield was obtained with the increasing fertilizer rates. Results further indicated that O. niloticus could successfully be reared in the field of irrigated boro rice with recommended fertilizer level. Larger size of fingerlings at release had improved recovery percent, body weight gain and higher fish yield. Results also revealed that rice + fish production system produced higher net return than the system with rice alone.

A importância do boro para a videira.

1996

Correção de deficiência de boro em videira.

2003

Deficiência de boro em mamoeiro.

Informacoes tecnicas sobre a deficiencia de boro em mamoeiro, envolvendo desde a ocorrencia ate as medidas preventivas e controle para o Estado do Amazonas.

Deficiência de boro em coqueiro - sintomas e correção.

Informações técnicas sobre sintomas e correção de deficiência de boro em coqueiro (Cocos nucifera), em Manaus-AM, Brasil.

Extratores ácidos e sais na determinação da disponibilidade de boro no solo.

O objetivo deste trabalho foi verificar a eficiência de seis extratores comparando-os com o extrator H2O quente, método atualmente utilizado na determinação da disponibilidade do B do solo.

Efeito da aplicação de boro via foliar na qualidade e na colheita de frutos de macieira.

2014

Evaluación del efecto de la fertilización con boro para híbridos de girasol en suelos haplustoles énticos de Gral. Pico, Departamento de Maracó, Prov. de La Pampa

p.45-49

Low frequency Raman scattering in amorphous materials: fused quartz, "pyrex" boro-silicate glass and soda-lime silicate glass

Raman scattering in the region 20 to 100 cm -1 for fused quartz, "pyrex" boro-silicate glass, and soft soda-lime silicate glass was investigated. The Raman spectra for the fused quartz and the pyrex glass were obtained at room temperature using the 488 nm exciting line of a Coherent Radiation argon-ion laser at powers up to 550 mW. For the soft soda-lime glass the 514.5 nm exciting line at powers up to 660 mW was used because of a weak fluorescence which masked the Stokes Raman spectrum. In addition it is demonstrated that the low-frequency Raman coupling constant can be described by a model proposed by Martin and Brenig (MB). By fitting the predicted spectra based on the model with a Gaussian, Poisson, and Lorentzian forms of the correlation function, the structural correlation radius (SCR) was determined for each glass. It was found that to achieve the best possible fit· from each of the three correlation functions a value of the SCR between 0.80 and 0.90 nm was required for both quartz and pyrex glass but for the soft soda-lime silicate glass the required value of the SCR. was between 0.50 and 0.60 nm .. Our results support the claim of Malinovsky and Sokolov (1986) that the MB model based on a Poisson correlation function provides a universal fit to the experimental VH (vertical and horizontal polarizations) spectrum for any glass regardless of its chemical composition. The only deficiency of the MB model is its failure to fit the experimental depolarization spectra.

Estudio de las propiedades mecánicas, tribológicas y electroquímicas de aleaciones CoCrMoC con adiciones de boro.

Tesis (Doctor en Ingeniería de Materiales) UANL, 2014.

Influência dos parâmetros de processo na deposição de nitreto de titânio por plasma em gaiola catódica

Titanium nitride films were grown on glass using the Cathodic Cage Plasma Deposition technique in order to verify the influence of process parameters in optical and structural properties of the films. The plasma atmosphere used was a mixture of Ar, N2 and H2, setting the Ar and N2 gas flows at 4 and 3 sccm, respectively and H2 gas flow varied from 0, 1 to 2 sccm. The deposition process was monitored by Optical Emission Spectroscopy (OES) to investigate the influence of the active species in plasma. It was observed that increasing the H2 gas flow into the plasma the luminescent intensities associated to the species changed. In this case, the luminescence of N2 (391,4nm) species was not proportional to the increasing of the H2 gas into the reactor. Other parameters investigated were diameter and number of holes in the cage. The analysis by Grazing Incidence X-Ray Diffraction (GIXRD) confirmed that the obtained films are composed by TiN and they may have variations in the nitrogen amount into the crystal and in the crystallite size. The optical microscopy images provided information about the homogeneity of the films. The atomic force microscopy (AFM) results revealed some microstructural characteristics and surface roughness. The thickness was measured by ellipsometry. The optical properties such as transmittance and reflectance (they were measured by spectrophotometry) are very sensitive to changes in the crystal lattice of the material, chemical composition and film thicknesses. Therefore, such properties are appropriate tools for verification of this process control. In general, films obtained at 0 sccm of H2 gas flow present a higher transmittance. It can be attributed to the smaller crystalline size due to a higher amount of nitrogen in the TiN lattice. The films obtained at 1 and 2 sccm of H2 gas flow have a golden appearance and XRD pattern showed peaks characteristics of TiN with higher intensity and smaller FWHM (Full Width at Half Maximum) parameter. It suggests that the hydrogen presence in the plasma makes the films more stoichiometric and becomes it more crystalline. It was observed that with higher number of holes in the lid of the cage, close to the region between the lid and the sample and the smaller diameter of the hole, the deposited film is thicker, which is justified by the most probability of plasma species reach effectively the sample and it promotes the growth of the film

Extração de boro de água produzida sintética por sistema microemulsionado

Boron is a semi-metal present in certain types of soils and natural waters. It is essential to the healthy development of plants and non-toxic to humans, depending on its concentration. It is used in various industries and it s present in water production coming from oil production. More specifically in Rio Grande do Norte, one of the largest oil producers on shore of Brazil, the relationship water/oil in some fields becomes more than 90%. The most common destination of this produced water is disposal in open sea after processing to meet the legal specification. In this context, this research proposes to study the extraction of boron in water produced by microemulsion systems for industrial utilization. It was taken into account the efficiency of extraction of boron related to surfactant (DDA and OCS, both characterized by FT-IR), cosurfactant (butanol and isoamyl alcohol), organic phase (kerosene and heptanes) and aqueous phase (solution of boron 3.6 ppm in alkaline pH). The ratio cosurfactant/ surfactant used was four and the percentage of organic phases for all points of study was set at 5%. It was chosen points with the highest percentage of aqueous phase. Each system was designed for three points of different compositions in relation to the constituents of a pseudoternary diagram. These points were chosen according to studies of phase behavior in pseudoternary diagrams made in previous studies. For this research, points were chosen in the Winsor II region. The excess aqueous solution obtained in these systems was separated and analyzed by ICP OES. For the data set obtained, the better efficiency in the extraction of boron was obtained using the system with DAC, isoamyl alcohol and heptanes, which extracted 49% in a single step. OCS was not viable to the extraction of boron by microemulsion system in the conditions defined in this study

Resposta de brócolis, couve-flor e repolho à adubação com boro em solo arenoso

Foram avaliados em condições de campo, em solo arenoso, com baixo teor de boro, os efeitos da adubação com cinco doses de boro (0; 2; 4; 6 e 8 kg ha-1 de B na forma de bórax) na produção de brócolis, couve-flor e repolho. O experimento obedeceu a um esquema fatorial com delineamento experimental de blocos ao acaso com três repetições. As adubações orgânica e química, inclusive o bórax, foram feitas no sulco antes do transplantio das mudas e a colheita foi feita entre 63 e 93 dias após o transplantio. A produtividade de brócolis variou de 16,9 a 20,5 t ha-1; a de couve-flor de 21,6 a 29,6 t ha-1 e a de repolho de 40,5 a 46,4 t ha-1. O aumento observado na produtividade de brócolis e de repolho foi linear e o efeito das doses de boro na produtividade de couve-flor foi quadrático, sendo necessários 5,1 kg ha-1 de B para atingir a produtividade máxima de 30 t ha-1. Brócolis e repolho mostraram-se menos sensíveis do que a couve-flor tanto à deficiência quanto ao excesso de boro. No caso da couve-flor, com a aplicação de 2 kg ha-1 ou de 6 kg ha-1 de B houve significativa perda de qualidade do produto.

Produção de repolho em função da aplicação de boro associada a adubo orgânico

Em condições de campo, em solo argiloso com teor médio de boro, foram avaliados os efeitos da adubação com boro, associada à adubação orgânica, na produção de repolho híbrido Kenzan. Cinco doses de B (0; 2,0; 4,0; 6,0 e 8,0 kg ha-1) foram associadas, em esquema fatorial, à ausência e presença (0 e 10 t ha-1) de vermicomposto de esterco bovino. O delineamento experimental foi em blocos casualizados com três repetições e as adubações orgânica e química foram feitas no sulco, por ocasião do transplantio das mudas. O ponto de colheita foi atingido 75 a 90 dias após o transplantio. A adubação com vermicomposto de esterco de bovino elevou a produção em 3,8 t ha-1, o diâmetro das cabeças de repolho em 0,8 cm e o peso das cabeças em 170 g. A produção de repolho aumentou linearmente com a adubação com B e variou de 52,94 t ha-1 a 65,95 t ha-1. A relação entre B no solo e produção foi linear e positiva.

Boro e nitrogênio na incidência de hastes ocas e no rendimento de brócolis

A incidência de hastes ocas em brócolis (Brassica oleracea L. var. italica Plenck) depende de vários fatores que afetam a absorção e o transporte de B, elemento responsável pelo aparecimento dessa desordem fisiológica. O trabalho avaliou os efeitos de quatro níveis de nitrogênio e dois níveis de boro e da interação entre eles na incidência de hastes ocas e na produção de brócolis. As doses de N (100, 150, 200 e 250 kg ha-1) foram divididas em quatro aplicações iguais aos 15, 30, 45 e 60 dias após o transplante. O boro (0, 4 e 8 kg ha-1) foi aplicado metade no plantio e a outra metade em cobertura aos 45 dias após o transplante. A massa média das inflorescências e a produção total foram diminuídas com a aplicação de B em função do crescimento mais lento das plantas provocado pela toxicidade desse elemento. Contudo, nas áreas não adubadas com B, a porcentagem de plantas com hastes ocas foi, em média, de 44,14%, sendo que a incidência dessa anomalia sofreu drástica redução com a aplicação de B, onde a maior dose (8 kg ha-1) resultou em apenas 4,52% de inflorescências afetadas. Doses de N superiores a 215,4 kg ha-1 aumentaram o número de plantas com hastes ocas somente nas áreas que não receberam B.