Pacific Rim treaty threatens public health: Patent law and medical procedures

Doctors, surgeons, and physicians around the Pacific Rim should be concerned by the proposals revealed by WikiLeaks in the Trans-Pacific Partnership (TPP). One of the most controversial features of the TPP is the proposal to provide for patent protection in respect of medical procedures. As Public Citizen observed, ‘Health providers, including surgeons, could be liable for the methods they use to treat patients.’ The civil society group noted: ‘Essentially, except for when a surgeon uses her bare hands, surgical methods would be patentable under the U.S. proposal.’ The TPP takes a broad approach to patents and medicine; lacks appropriate safeguards; and fails to address larger questions about equity, development, and human rights. Such a measure could result in greater litigation against medical professionals; barriers to access to medical procedures for patients; and skyrocketing health costs.

Will the Pacific Rim become a gasland? Dirty fracking and the Trans-Pacific Partnership

There has been much debate about the relationship between international trade, and intellectual property, the environment, biodiversity protection, and climate change. The Obama Administration has pushed such issues into sharp relief, with its advocacy for sweeping international trade agreements, such as the Trans-Pacific Partnership. There has been much public concern about the impact of the Pacific Rim Treaty upon the protection of the environment. In particular, there has been a debate about whether the Trans-Pacific Partnership will promote dirty fracking...

Reflexive Incidence Matrx (RIM) Representation of Petr Nets

Although incidence matrix representation has been used to analyze the Petri net based models of a system, it has the limitation that it does not preserve reflexive properties (i.e., the presence of selfloops) of Petri nets. But in many practical applications self-loops play very important roles. This paper proposes a new representation scheme for general Petri nets. This scheme defines a matrix called "reflexive incidence matrix (RIM) c which is a combination of two matrices, a "base matrix Cb,,, and a "power matrix CP." This scheme preserves the reflexive and other properties of the Petri nets. Through a detailed analysis it is shown that the proposed scheme requires less memory space and less processing time for answering commonly encountered net queries compared to other schemes. Algorithms to generate the RIM from the given net description and to decompose RIM into input and output function matrices are also given. The proposed Petri net representation scheme is very useful to model and analyze the systems having shared resources, chemical processes, network protocols, etc., and to evaluate the performance of asynchronous concurrent systems.

Comparative study on green building supportive policies of pacific-rim countries most vulnerable to climate change

- Problem Climate change is affecting the world in numerous ways such as increased temperatures, sea level rise, and increased droughts and floods. Governments worldwide, especially in the most vulnerable countries, are urged to seek better solutions for sustainable development. The construction industry and buildings have enormous impacts on humans and the environment, meaning green building must be one of the solutions. Government involvement is widely considered as one of the essential and most effective ways to promote green building and drive the construction market towards sustainability. This paper will review green building policy of the Pacific-Rim countries that are most vulnerable to climate change according to the recent Standard and Poor’s ranking, including: Cambodia, Vietnam, Fiji, Philippines, Papua New Guinea and Indonesia. Methodology: This paper will review policy related publications including journal and conference papers, portal websites of governments, legislation documents and reports of international organisations. It will focus on the policies and governmental instruments that support the adoption of green building practices. - Findings All six governments have launched climate change adaptation policies, showing a great concern regarding the damages caused by the phenomenon. All countries except Papua New Guinea have promulgated energy efficiency policy and programs which indirectly promote the adoption of green building practices. The comparison study shows that Philippines and Indonesia motivate the adoption of renewable energy generation, energy efficiency and green building through either financial or advocacy instruments, while other four countries tend to implement regulatory tools to mandate energy conservation. Through comparison, Cambodia and Vietnam – the two countries providing vision to develop green building - can learn from Philippines and Indonesia’s policy and instruments. - Research limitations Language differences between the countries and limit of formal sources may pose difficulties in searching for information. While much English language literature exists, sources from Cambodia, Philippines and Indonesia are less accessible. - Takeaway for practice As the paper provides more understanding about the supportive policy of those countries, it will introduce more opportunities for green property developers to invest in construction markets of those Pacific-Rim countries. - Originality There is little research reviewing green building supportive policies of developing and less-wealthy countries that are forecasted to be most vulnerable and most impacted by climate change. The originality of this paper lies in its investigation on how those countries intend to respond to this phenomenon and whether and to what extent they support the green building market by using policy tools.

Population structure of chum salmon (Oncorhynchus keta) across the Pacific Rim, determined from microsatellite analysis

The Pacific Rim population structure of chum salmon (Oncorhynchus keta) was examined with a survey of microsatellite variation to describe the distribution of genetic variation and to evaluate whether chum salmon may have originated from two or more glacial refuges following dispersal to newly available habitat after glacial retreat. Variation at 14 microsatellite loci was surveyed for over 53,000 chum salmon sampled from over 380 localities ranging from Korea through Washington State. An index of genetic differentiation, FST, over all populations and loci was 0.033, with individual locus values ranging from 0.009 to 0.104. The most genetically diverse chum salmon were observed from Asia, particularly Japan, whereas chum salmon from the Skeena River and Queen Charlotte Islands in northern British Columbia and those from Washington State displayed the fewest number of alleles compared with chum salmon in other regions. Differentiation in chum salmon allele frequencies among regions and populations within regions was approximately 18 times greater than that of annual variation within populations. A regional structuring of populations was the general pattern observed, with chum salmon spawning in different tributaries within a major river drainage or spawning in smaller rivers in a geographic area generally more similar to each other than to populations in different major river drainages or geographic areas. Population structure of chum salmon on a Pacific Rim basis supports the concept of a minimum of two refuges, northern and southern, during the last glaciation, but four possible refuges fit better the observed distribution of genetic variation. The distribution of microsatellite variation of chum salmon on a Pacific Rim basis likely reflects the origins of salmon radiating from refuges after the last glaciation period.

Caracterização de cálculos urinários humanos inteiros de rim e bexiga usando difração de raios X e microtomografia computadorizada

A urolitíase é um problema de escala mundial, que ocorre em todas as regiões, culturas e grupos raciais. A incidência desta doença vem aumentando ao redor do mundo e dados mostram que no Brasil estima-se que são afetados 5% da população com uma taxa de recorrência de 2,5%. Conhecer a composição mineral e estrutura interna dos cálculos é um passo importante para tentar entender melhor a fisiopatologia desta doença. Quatro cálculos urinários infecciosos, íntegros de grande volume (diâmetro maior que 20 mm), sendo dois provenientes da bexiga e dois de rins, obtidos cirurgicamente no setor de urologia do Hospital Universitário Pedro Ernesto (HUPE/UERJ) foram analisados usando microtomografia (μCT) e difração de raios X por policristais (DRXP). As imagens microtomográficas foram obtidas usando tubo de raios X microfoco na estação TomoLab e radiação síncrotron (SR-μCT) na linha de Física Médica, ambos no Laboratório Síncrotron Elettra, Trieste, Itália. As medidas de DRXP foram realizadas na linha de Difração de Raios X do Laboratório Nacional de luz Síncrotron, Campinas, Brasil. Para os cálculos de bexiga foram encontradas quatro fases cristalinas: estruvita (STV), oxalato mono (COM) e dihidratado (COD) e hidroxiapatita (HAp). Nos cálculos renais foram encontrados STV e HAp, sendo predominante a primeira fase cristalina. A quantidade de material amorfo (não-cristalino) foi maior que 60% da composição das amostras. A técnica convencional utilizada foi eficaz para análise dos cálculos urinários inteiros e possibilitou a visualização de estruturas internas sem interferência de procedimentos prévios de preparação da amostra. As análises de DRXP com fonte síncrotron aliadas ao método Rietveld foram determinantes para identificação e quantificação dos minerais presentes nas varias camadas das amostras. Pode-se constatar a complementaridade entre a μCT e a DRXP para caracterização microestrutural e mineralógica de cálculos urinários humanos.

Efeitos transgeracionais da restrição materna de vitamina D em camundongos: rim e metabolismo da glicose

A vitamina D, atualmente, é relacionada também ao metabolismo da glicose e o desenvolvimento de órgãos. Fêmeas de camundongos suíços (F0) foram alimentadas por uma das dietas experimentais: SC (dieta padrão) ou VitD- (dieta sem vitamina D). A prole de machos foi estudada nas idades: nascimento, 10 dias, desmame e seis meses, nas gerações F1 e F2. Avaliou-se a biometria [Massa Corporal (MC), Comprimento nasoanal (CNA) e Pressão Arterial (PA)], urina de 24 horas, glicemia e Teste Oral de Tolerância à Glicose (TOTG). Durante a eutanásia, o sangue foi coletado para análise bioquímica e os tecidos foram removidos para análise estereológica, morfométrica e Western blotting (WB). Não houve diferença de MC ao nascimento. Ao desmame, o grupo F2-VitD- teve maior MC que F2-SC (P=0,03) e aos seis meses, os grupos F1 e F2-VitD- tiveram MC mais elevada (P<0,05 vs SC). A PA foi crescente na prole VitD-, sendo maior em F1-VitD- (P=0,001). A glicemia e TOTG foram alterados somente na F1-VitD-, seguida de esteatose hepática (+99%), hipertrofia da ilhota pancreática (+40%) e elevação do triglicerídeo sanguíneo (P<0,01). O WB de fígado mostrou elevação de FAS (+18%, P<0,01), no grupo com esteatose. Curiosamente, embora a F2-VitD- tenha apresentado elevação de MC, somente o colesterol total fora alterado (P<0,05). Quanto à nefrogênese, houve 50% mais glomérulos imaturos em F1-VitD- que F1-SC (P<0,0001). Porém, na F2 houve aumento somente de 20% (P<0,001). Aos 10 dias, F1-VitD- teve 150% mais glomérulos imaturos e 25% mais glomérulos maduros que SC-F1 (P<0,0001). O WB de rim mostrou que a prole F1-VitD- apresentou maior expressão de renina, ao desmame e aos seis meses, enquanto que a expressão de podocina foi reduzida (P=0,0004). Não houve diferença na análise de WT1. A restrição materna em vitamina D altera a morfologia do pâncreas e fígado, com resistência à insulina, altera a expressão renal de importantes fatores, assim como retarda a maturação glomerular estendendo o período da nefrogênese, principalmente na geração F1.

Experimental investigation of turbine stator well rim seal, reingestion and interstage seal flows using gas concentration techniques and displacement measurements

Gas turbine engine performance requires effective and reliable internal cooling over the duty cycle of the engine. Life predictions for rotating components subject to the main gas path temperatures are vital. This demands increased precision in the specification of the internal air system flows which provide turbine stator well cooling and sealing. This in turn requires detailed knowledge of the flow rates through rim seals and interstage labyrinth seals. Knowledge of seal movement and clearances at operating temperatures is of great importance when prescribing these flows. A test facility has been developed at the University of Sussex, incorporating a two stage turbine rated at 400 kW with an individual stage pressure ratio of 1.7:1. The mechanical design of the test facility allows internal cooling geometry to be rapidly re-configured, while cooling flow rates of between 0.71 CW, ENT and 1.46 C W, ENT, may be set to allow ingress or egress dominated cavity flows. The main annulus and cavity conditions correspond to in cavity rotational Reynolds numbers of 1.71×106< Reφ <1.93×106. Displacement sensors have been used to establish hot running seal clearances over a range of stator well flow conditions, allowing realistic flow rates to be calculated. Additionally, gas seeding techniques have been developed, where stator well and main annulus flow interactions are evaluated by measuring changes in gas concentration. Experiments have been performed which allow rim seal and re-ingestion flows to be quantified. It will be shown that this work develops the measurement of stator well cooling flows and provides data suitable for the validation of improved thermo-mechanical and CFD codes, beneficial to the engine design process. Copyright © 2011 by Rolls-Royce plc.

An investigation into numerical analysis alternatives for predicting reingestion in turbine disc rim cavities

Reliable means of predicting ingestion in cavities adjacent to the main gas path are increasingly being sought by engineers involved in the design of gas turbines. In this paper, analysis is to be presented that results from an extended research programme, MAGPI, sponsored by the EU and several leading gas turbine manufactures and universities. Extensive use is made of CFD modelling techniques to understand the aerodynamic behaviour of a turbine stator well cavity, focusing on the interaction of cooling air supply with the main annulus gas. The objective of the study has been to benchmark a number of CFD codes and numerical techniques covering RANS and URANS calculations with different turbulence models in order to assess the suitability of the standard settings used in the industry for calculating the mechanics of the flow travelling between cavities in a turbine through the main gas path. The modelling methods employed have been compared making use of experimental data gathered from a dedicated two-stage turbine rig, running at engine representative conditions. Extensive measurements are available for a range of flow conditions and alternative cooling arrangements. The limitations of the numerical methods in calculating the interaction of the cooling flow egress and the main stream gas, and subsequent ingestion into downstream cavities in the engine (i.e. re-ingestion), have been exposed. This has been done without losing sight of the validation of the CFD for its use for predicting heat transfer, which was the main objective of the partners of the MAGPI Work- Package 1 consortium. Copyright © 2012 by ASME.

Rim instability by solvent-induced dewetting

We study the condition of the occurrence of the rim instability in the solvent-induced dewetting process. Our experimental results show that the film thickness not only greatly influences the occurrence of the rim instability, but also influences the wavelength lambda as characterized by the undulation of the deformed contact line. The molecular weight of polymer does not almost influence the occurrence of the rim instability and the wavelength lambda. The wavelength lambda is proportional to the width of the rim in the rim instability region. The receding contact angle theta of polymer solutions on substrates in the dewetting process is an important factor to influence the rim instability in the solvent-induced dewetting.