Analisi del flusso in acque sotterranee e principi di progettazione di barriere idrauliche

Le acque sotterranee rappresentano una risorsa fondamentale di acqua potabile; per questo motivo esse devono essere preservate, controllate, e se necessario, trattate e decontaminate. Nella presente tesi è stato analizzato, dal punto di vista idraulico, uno dei metodi di risanamento delle acque sotterranee più efficaci ed ampiamente utilizzati: il sistema Pump & Treat. Esso consiste nella costruzione di una barriera idraulica formata da pozzi che pompano acqua dal sottosuolo per consentirne il trattamento e la conseguente reimmissione nel corpo idrico. In questo contesto, sono stati approfonditi i principali criteri di progettazione ed è stato sviluppato un esempio applicativo utilizzando il codice numerico MODFLOW per la risoluzione delle equazioni di flusso e trasporto in acque sotterranee.

Simulating dioxane transport in a heterogeneous glacial aquifer system (Washtenaw County, Michigan) using publicly available models and data

The primary challenge in groundwater and contaminant transport modeling is obtaining the data needed for constructing, calibrating and testing the models. Large amounts of data are necessary for describing the hydrostratigraphy in areas with complex geology. Increasingly states are making spatial data available that can be used for input to groundwater flow models. The appropriateness of this data for large-scale flow systems has not been tested. This study focuses on modeling a plume of 1,4-dioxane in a heterogeneous aquifer system in Scio Township, Washtenaw County, Michigan. The analysis consisted of: (1) characterization of hydrogeology of the area and construction of a conceptual model based on publicly available spatial data, (2) development and calibration of a regional flow model for the site, (3) conversion of the regional model to a more highly resolved local model, (4) simulation of the dioxane plume, and (5) evaluation of the model's ability to simulate field data and estimation of the possible dioxane sources and subsequent migration until maximum concentrations are at or below the Michigan Department of Environmental Quality's residential cleanup standard for groundwater (85 ppb). MODFLOW-2000 and MT3D programs were utilized to simulate the groundwater flow and the development and movement of the 1, 4-dioxane plume, respectively. MODFLOW simulates transient groundwater flow in a quasi-3-dimensional sense, subject to a variety of boundary conditions that can simulate recharge, pumping, and surface-/groundwater interactions. MT3D simulates solute advection with groundwater flow (using the flow solution from MODFLOW), dispersion, source/sink mixing, and chemical reaction of contaminants. This modeling approach was successful at simulating the groundwater flows by calibrating recharge and hydraulic conductivities. The plume transport was adequately simulated using literature dispersivity and sorption coefficients, although the plume geometries were not well constrained.

Modelización higrogeológica en minería : aplicación a drenaje de minas

The aim of this Thesis is to get in deep in the use of models (conceptual and numerical), as a prediction and analytical tool for hydrogeological studies, mainly from point of view of the mining drainage. In the first place, are developed the basic concepts and the parametric variations range are developed, usually used in the modelization of underground f10w and particle transport, and also the more recommended modelization process, analysing step by step each of its sequences, developed based in the experience of the author, contrasted against the available bibliography. Following MODFLOW is described, as a modelization tool, taking into account the advantages that its more common pre/post-treatment software have (Processing MODFLOW, Mod CAD and Visual MODFLOW). In third place, are introduced the criterions and required parameters to develop a conceptual model, numerical discretization, definition of the boundary and initial conditions, as well as all those factors which affects to the system (antropic or natural), developing the creation process, data introduction, execution of morlel, convergence criterions and calibration and obtaining result, natural of Visual MODFLOUI. Next, five practical cases are analysed, in which the author has been applied MODFLOW, and the different pre/post-treatment software (Processing MODFLOW, Mod CAD and Visual MODFLOW), describing for each one, the objectives, the conceptual model defined, discretization, the parametric definition, sensibility analysis, results reached and future states prediction. In fifth place, are presented a program developed by the author which allow to improve the facilities offered by Mod CAD and Visual MODFLOW, expanding modelization possibilities and connection to other computers. Next step it is presented a series of solutions to the most typical problems which could appear during the modelization with MODFLOW. Finally, the conclusions and recommendation readied are exposed, with the purpose to help in the developing of hydrogeological models both conceptuals and numericals. RESUMEN El objetivo de esta Tesis es profundizar en el empleo de modelos (conceptuales y numéricos), como herramienta de predicción y análisis en estudios hidrogeológicos, fundamentalmente desde el punto de vista de drenaje minero. En primer lugar, se desarrollan los conceptos básicos y los rangos de variación paramétrica, habituales en la modelización de flujos subterráneos y transporte de partículas, así como el proceso de modelización más recomendado, analizando paso a paso cada una de sus secuencias, desarrollado en base a la experiencia del autor, contrastado con la bibliografía disponible. Seguidamente se describe MODFLOW como herramienta de modelización, valorando las ventajas que presentan sus software de pre/post-tratamiento más comunes (Proccesing MODFLOW, Mod CAD y Visual MODFLOW). En tercer lugar, se introducen los criterios y parámetros precisos para desarrollar un modelo conceptual, discretización numérica, definición de las condiciones de contorno e iniciales, así como todos aquellos factores que afectan al sistema (antrópicos o naturales), desarrollando el proceso de creación, introducción de datos, ejecución del modelo, criterios de convergencia y calibración, y obtención de resultados, propios de Visual MODFLOW. A continuación, se analizan cinco casos prácticos, donde el autor ha aplicado MODFLOW, así como diferentes software de pre/post-tratamiento (Proccesing MODFLOW, Mod CAD y Visual MODFLOW), describiendo para cada uno, el objetivo marcado, modelo conceptual definido, discretización, definición paramétrica, análisis de sensibilidad, resultados alcanzados y predicción de estados futuros. En quinto lugar, se presenta un programa desarrollado por el autor, que permite mejorar las prestaciones ofrecidas por MODFLOW y Visual MODFLOW, ampliando las posibilidades de modelización y conexión con otros ordenadores. Seguidamente se plantean una serie de soluciones a los problemas más típicos que pueden producirse durante la modelización con MODFLOW. Por último, se exponen las conclusiones y recomendaciones alcanzadas, con el fin de auxiliar el desarrollo del desarrollo de modelos hidrogeológicos, tanto conceptuales como numéricos.

Desarrollo de métodos numérico-interpretativos para la realización de ensayos de bombeo

Los ensayos de bombeo son, sin lugar a dudas, una de las pruebas más fiables y de mayor interés que se hacen en el medio físico. No son pruebas estrictamente puntuales, dado que el bombeo atrae flujo desde distancias lejanas al pozo, la prueba tiene una excelente representatividad espacial. Los métodos de interpretación mediante ensayos de bombeo se empezaron a plantear en la primera mitad del pasado siglo. Con los ensayos de bombeo se puede calcular la transmisividad y coeficiente de almacenamiento de las formaciones acuíferas y suministran información sobre el tipo de acuífero, la calidad constructiva del pozo de extracción, la existencia de barreras impermeable o bordes de recarga próximos, e incluso en algunas circunstancias permiten el cálculo del área de embalse subterráneo. Desde mediados del siglo 20 existe una eficaz y abundante gama de métodos analítico-interpretativos de ensayos de bombeo, tanto en régimen permanente como transitorio. Estos métodos son ampliamente conocidos y están muy experimentados a lo largo de muchos países, sin embargo, hoy día, podrían utilizarse modelos de flujo para la interpretación, logrando la misma fiabilidad e incluso mejores posibilidades de análisis. Muchos ensayos que no pueden interpretarse porque las configuraciones del medio son demasiado complejas y no están disponibles, o no es posible, el desarrollo de métodos analíticos, tienen buena adaptación y en ocasiones muy fácil solución haciendo uso de los métodos numéricos de simulación del flujo. En esta tesis se ha buscado una vía de interpretar ensayos de bombeo haciendo uso de modelos de simulación del flujo. Se utiliza el modelo universal MODFLOW del United States Geological Survey, en el cual se configura una celda de simulación y mallado particularmente adecuados para el problema a tratar, se valida con los métodos analíticos existentes. Con la célula convenientemente validada se simulan otros casos en los que no existen métodos analíticos desarrollados dada la complejidad del medio físico a tratar y se sacan las oportunas conclusiones. Por último se desarrolla un modelo específico y la correspondiente aplicación de uso general para la interpretación numérica de ensayos de bombeo tanto con las configuraciones normales como con configuraciones complejas del medio físico. ABSTRACT Pumping tests are, without doubt, one of the most reliable and most interesting tests done in the physical environment. They are not strictly anecdotal evidence, since pumping flow attracts from far distances to the well, the test has excellent spatial representation. Methods of interpretation by pumping tests began to arise in the first half of last century. With pumping tests, can be calculated transmissivity and storage coefficient of the aquifer formations, and provide information on the type of aquifer, the construction quality of the well, the existence of waterproof barriers or borders next recharge, and even in some circumstances allow calculating the area of underground reservoir. Since the mid-20th century there is effective and abundant range of analytical interpretative pumping tests, both in steady state and transient methods. These methods are very widely known and experienced over many countries, however, nowadays, may flow models used for interpretation, obtaining equally reliable or even better possibilities for analysis. Many trials cannot be interpreted as environmental settings are too complex and are not available, or not possible, the development of analytical methods, have good adaptation and sometimes very easily solved using numerical flow simulation methods. This thesis has sought a way to interpret pumping tests using flow simulation models. MODFLOW universal model of United States Geological Survey, in which a simulation cell and meshing particularly suitable for the problem to be treated, is validated with existing analytical methods used is set. With suitably validated cell other cases where there are no analytical methods developed given the complexity of the physical environment to try and draw appropriate conclusions are simulated. Finally, a specific model and the corresponding application commonly used for numerical interpretation of pumping tests both with normal settings as complex configurations of the physical environment is developed.

Efectos del cambio climático y usos del suelo sobre los recursos hídricos de la cuenca del río Tordera (Barcelona, España)

Se presentan los efectos del cambio global en la cuenca del río Tordera (España) para el periodo 2000-2050, escenarios climáticos A2 (medio-alto) definidos por el Panel Intergubernamental del Cambio Climático (IPCC, 200) y escenarios socioeconómicos (cambios previstos en la cuenca) denominados estable y tendencial. Los efectos sobre los recursos hídricos se han analizado de forma conjunta superficial-subterránea mediante una metodológica de tipo acoplado. Para establecer los impactos futuros sobre los recursos hídricos se ha seleccionado el Modelo de Circulación Global ECHAM5 (Max Planck Institute). Los resultados obtenidos indican una disminución de la precipitación del 11.3% y un aumento de la temperatura de 1ºC, respecto a los valores históricos de la zona. De acuerdo a la proyección futura (2050) sobre cambios en los recursos hídricos, la escorrentía superficial obtenida mediante simulación con el código HEC-HMS 3.4 experimenta una reducción del 31.8% respecto al valor histórico y la recarga natural, estimada mediante VISUAL-Balan, se reduce en un 11.7%. El balance en el acuífero deltaico simulado mediante MODFLOW 2009.1 Pro muestra igualmente una disminución de los parámetros del balance. Los cambios del uso del suelo previstos de acuerdo a la legislación vigente (escenarios socioeconómicos) no conducen a la generación de un impacto apreciable en los recursos hídricos; según los escenarios definidos la variación de precipitación y temperatura son los parámetros fundamentales del cambio previsto.

Quantitative risk assessment of groundwater quality utilizing GIS technology and coupled groundwater models

The thesis presents a two-dimensional Risk Assessment Method (RAM) where the assessment of risk to the groundwater resources incorporates both the quantification of the probability of the occurrence of contaminant source terms, as well as the assessment of the resultant impacts. The approach emphasizes the need for a greater dependency on the potential pollution sources, rather than the traditional approach where assessment is based mainly on the intrinsic geo-hydrologic parameters. The risk is calculated using Monte Carlo simulation methods whereby random pollution events were generated to the same distribution as historically occurring events or a priori potential probability distribution. Integrated mathematical models then simulate contaminant concentrations at the predefined monitoring points within the aquifer. The spatial and temporal distributions of the concentrations were calculated from repeated realisations, and the number of times when a user defined concentration magnitude was exceeded is quantified as a risk. The method was setup by integrating MODFLOW-2000, MT3DMS and a FORTRAN coded risk model, and automated, using a DOS batch processing file. GIS software was employed in producing the input files and for the presentation of the results. The functionalities of the method, as well as its sensitivities to the model grid sizes, contaminant loading rates, length of stress periods, and the historical frequencies of occurrence of pollution events were evaluated using hypothetical scenarios and a case study. Chloride-related pollution sources were compiled and used as indicative potential contaminant sources for the case study. At any active model cell, if a random generated number is less than the probability of pollution occurrence, then the risk model will generate synthetic contaminant source term as an input into the transport model. The results of the applications of the method are presented in the form of tables, graphs and spatial maps. Varying the model grid sizes indicates no significant effects on the simulated groundwater head. The simulated frequency of daily occurrence of pollution incidents is also independent of the model dimensions. However, the simulated total contaminant mass generated within the aquifer, and the associated volumetric numerical error appear to increase with the increasing grid sizes. Also, the migration of contaminant plume advances faster with the coarse grid sizes as compared to the finer grid sizes. The number of daily contaminant source terms generated and consequently the total mass of contaminant within the aquifer increases in a non linear proportion to the increasing frequency of occurrence of pollution events. The risk of pollution from a number of sources all occurring by chance together was evaluated, and quantitatively presented as risk maps. This capability to combine the risk to a groundwater feature from numerous potential sources of pollution proved to be a great asset to the method, and a large benefit over the contemporary risk and vulnerability methods.

GIS linked environmental process models

In recent years there has been a great effort to combine the technologies and techniques of GIS and process models. This project examines the issues of linking a standard current generation 2½d GIS with several existing model codes. The focus for the project has been the Shropshire Groundwater Scheme, which is being developed to augment flow in the River Severn during drought periods by pumping water from the Shropshire Aquifer. Previous authors have demonstrated that under certain circumstances pumping could reduce the soil moisture available for crops. This project follows earlier work at Aston in which the effects of drawdown were delineated and quantified through the development of a software package that implemented a technique which brought together the significant spatially varying parameters. This technique is repeated here, but using a standard GIS called GRASS. The GIS proved adequate for the task and the added functionality provided by the general purpose GIS - the data capture, manipulation and visualisation facilities - were of great benefit. The bulk of the project is concerned with examining the issues of the linkage of GIS and environmental process models. To this end a groundwater model (Modflow) and a soil moisture model (SWMS2D) were linked to the GIS and a crop model was implemented within the GIS. A loose-linked approach was adopted and secondary and surrogate data were used wherever possible. The implications of which relate to; justification of a loose-linked versus a closely integrated approach; how, technically, to achieve the linkage; how to reconcile the different data models used by the GIS and the process models; control of the movement of data between models of environmental subsystems, to model the total system; the advantages and disadvantages of using a current generation GIS as a medium for linking environmental process models; generation of input data, including the use of geostatistic, stochastic simulation, remote sensing, regression equations and mapped data; issues of accuracy, uncertainty and simply providing adequate data for the complex models; how such a modelling system fits into an organisational framework.

Integrated surface-ground water modeling in wetlands with improved methods to simulate vegetative resistance to flow

In topographically flat wetlands, where shallow water table and conductive soil may develop as a result of wet and dry seasons, the connection between surface water and groundwater is not only present, but perhaps the key factor dominating the magnitude and direction of water flux. Due to their complex characteristics, modeling waterflow through wetlands using more realistic process formulations (integrated surface-ground water and vegetative resistance) is an actual necessity. This dissertation focused on developing an integrated surface – subsurface hydrologic simulation numerical model by programming and testing the coupling of the USGS MODFLOW-2005 Groundwater Flow Process (GWF) package (USGS, 2005) with the 2D surface water routing model: FLO-2D (O’Brien et al., 1993). The coupling included the necessary procedures to numerically integrate and verify both models as a single computational software system that will heretofore be referred to as WHIMFLO-2D (Wetlands Hydrology Integrated Model). An improved physical formulation of flow resistance through vegetation in shallow waters based on the concept of drag force was also implemented for the simulations of floodplains, while the use of the classical methods (e.g., Manning, Chezy, Darcy-Weisbach) to calculate flow resistance has been maintained for the canals and deeper waters. A preliminary demonstration exercise WHIMFLO-2D in an existing field site was developed for the Loxahatchee Impoundment Landscape Assessment (LILA), an 80 acre area, located at the Arthur R. Marshall Loxahatchee National Wild Life Refuge in Boynton Beach, Florida. After applying a number of simplifying assumptions, results have illustrated the ability of the model to simulate the hydrology of a wetland. In this illustrative case, a comparison between measured and simulated stages level showed an average error of 0.31% with a maximum error of 2.8%. Comparison of measured and simulated groundwater head levels showed an average error of 0.18% with a maximum of 2.9%. The coupling of FLO-2D model with MODFLOW-2005 model and the incorporation of the dynamic effect of flow resistance due to vegetation performed in the new modeling tool WHIMFLO-2D is an important contribution to the field of numerical modeling of hydrologic flow in wetlands.

Lattice Boltzmann modeling of fluid flow and solute transport in karst aquifers

A novel modeling approach is applied to karst hydrology. Long-standing problems in karst hydrology and solute transport are addressed using Lattice Boltzmann methods (LBMs). These methods contrast with other modeling approaches that have been applied to karst hydrology. The motivation of this dissertation is to develop new computational models for solving ground water hydraulics and transport problems in karst aquifers, which are widespread around the globe. This research tests the viability of the LBM as a robust alternative numerical technique for solving large-scale hydrological problems. The LB models applied in this research are briefly reviewed and there is a discussion of implementation issues. The dissertation focuses on testing the LB models. The LBM is tested for two different types of inlet boundary conditions for solute transport in finite and effectively semi-infinite domains. The LBM solutions are verified against analytical solutions. Zero-diffusion transport and Taylor dispersion in slits are also simulated and compared against analytical solutions. These results demonstrate the LBM’s flexibility as a solute transport solver. The LBM is applied to simulate solute transport and fluid flow in porous media traversed by larger conduits. A LBM-based macroscopic flow solver (Darcy’s law-based) is linked with an anisotropic dispersion solver. Spatial breakthrough curves in one and two dimensions are fitted against the available analytical solutions. This provides a steady flow model with capabilities routinely found in ground water flow and transport models (e.g., the combination of MODFLOW and MT3D). However the new LBM-based model retains the ability to solve inertial flows that are characteristic of karst aquifer conduits. Transient flows in a confined aquifer are solved using two different LBM approaches. The analogy between Fick’s second law (diffusion equation) and the transient ground water flow equation is used to solve the transient head distribution. An altered-velocity flow solver with source/sink term is applied to simulate a drawdown curve. Hydraulic parameters like transmissivity and storage coefficient are linked with LB parameters. These capabilities complete the LBM’s effective treatment of the types of processes that are simulated by standard ground water models. The LB model is verified against field data for drawdown in a confined aquifer.

Lattice Boltzmann Modeling of Fluid Flow and Solute Transport in Karst Aquifers

A novel modeling approach is applied to karst hydrology. Long-standing problems in karst hydrology and solute transport are addressed using Lattice Boltzmann methods (LBMs). These methods contrast with other modeling approaches that have been applied to karst hydrology. The motivation of this dissertation is to develop new computational models for solving ground water hydraulics and transport problems in karst aquifers, which are widespread around the globe. This research tests the viability of the LBM as a robust alternative numerical technique for solving large-scale hydrological problems. The LB models applied in this research are briefly reviewed and there is a discussion of implementation issues. The dissertation focuses on testing the LB models. The LBM is tested for two different types of inlet boundary conditions for solute transport in finite and effectively semi-infinite domains. The LBM solutions are verified against analytical solutions. Zero-diffusion transport and Taylor dispersion in slits are also simulated and compared against analytical solutions. These results demonstrate the LBM’s flexibility as a solute transport solver. The LBM is applied to simulate solute transport and fluid flow in porous media traversed by larger conduits. A LBM-based macroscopic flow solver (Darcy’s law-based) is linked with an anisotropic dispersion solver. Spatial breakthrough curves in one and two dimensions are fitted against the available analytical solutions. This provides a steady flow model with capabilities routinely found in ground water flow and transport models (e.g., the combination of MODFLOW and MT3D). However the new LBM-based model retains the ability to solve inertial flows that are characteristic of karst aquifer conduits. Transient flows in a confined aquifer are solved using two different LBM approaches. The analogy between Fick’s second law (diffusion equation) and the transient ground water flow equation is used to solve the transient head distribution. An altered-velocity flow solver with source/sink term is applied to simulate a drawdown curve. Hydraulic parameters like transmissivity and storage coefficient are linked with LB parameters. These capabilities complete the LBM’s effective treatment of the types of processes that are simulated by standard ground water models. The LB model is verified against field data for drawdown in a confined aquifer.

Integrated Surface-Ground Water Modeling in Wetlands With Improved Methods to Simulate Vegetative Resistance to Flow

This dissertation focused on developing an integrated surface – subsurface hydrologic simulation numerical model by programming and testing the coupling of the USGS MODFLOW-2005 Groundwater Flow Process (GWF) package (USGS, 2005) with the 2D surface water routing model: FLO-2D (O’Brien et al., 1993). The coupling included the necessary procedures to numerically integrate and verify both models as a single computational software system that will heretofore be referred to as WHIMFLO-2D (Wetlands Hydrology Integrated Model). An improved physical formulation of flow resistance through vegetation in shallow waters based on the concept of drag force was also implemented for the simulations of floodplains, while the use of the classical methods (e.g., Manning, Chezy, Darcy-Weisbach) to calculate flow resistance has been maintained for the canals and deeper waters. A preliminary demonstration exercise WHIMFLO-2D in an existing field site was developed for the Loxahatchee Impoundment Landscape Assessment (LILA), an 80 acre area, located at the Arthur R. Marshall Loxahatchee National Wild Life Refuge in Boynton Beach, Florida. After applying a number of simplifying assumptions, results have illustrated the ability of the model to simulate the hydrology of a wetland. In this illustrative case, a comparison between measured and simulated stages level showed an average error of 0.31% with a maximum error of 2.8%. Comparison of measured and simulated groundwater head levels showed an average error of 0.18% with a maximum of 2.9%.

Investigation of spatial patterns of ground-water exchange with lakes, using a three-dimensional numerical model

Hydrogeologic variables controlling groundwater exchange with inflow and flow-through lakes were simulated using a three-dimensional numerical model (MODFLOW) to investigate and quantify spatial patterns of lake bed seepage and hydraulic head distributions in the porous medium surrounding the lakes. Also, the total annual inflow and outflow were calculated as a percentage of lake volume for flow-through lake simulations. The general exponential decline of seepage rates with distance offshore was best demonstrated at lower anisotropy ratio (i.e., Kh/Kv = 1, 10), with increasing deviation from the exponential pattern as anisotropy was increased to 100 and 1000. 2-D vertical section models constructed for comparison with 3-D models showed that groundwater heads and seepages were higher in 3-D simulations. Addition of low conductivity lake sediments decreased seepage rates nearshore and increased seepage rates offshore in inflow lakes, and increased the area of groundwater inseepage on the beds of flow-through lakes. Introduction of heterogeneity into the medium decreased the water table and seepage ratesnearshore, and increased seepage rates offshore in inflow lakes. A laterally restricted aquifer located at the downgradient side of the flow-through lake increased the area of outseepage. Recharge rate, lake depth and lake bed slope had relatively little effect on the spatial patterns of seepage rates and groundwater exchange with lakes.

Costruzione del quadro conoscitivo della Conoide Enza al fine di una gestione sostenibile della risorsa idrica

Il lavoro di tesi ha l'obiettivo di fornire un quadro conoscitivo preliminare della Conoide Enza, importante corpo idrico sotterraneo situato nella provincia di Reggio-Emilia. Unitamente viene data una sua rappresentazione cartografica digitale attraverso software GIS, utile a geo-referenziare l'acquifero. Tale lavoro permette di convogliare ed archiviare in un sistema informativo territoriale le osservazioni e i dati necessari a successive indagini quantitative sulla Conoide. In tal senso, viene fornito un esempio di modellazione di flusso nell'acquifero tramite software MODFLOW, così da mostrare l'analisi di uno scenario di prelievo a partire dai dati forniti. In particolare, è simulato il comportamento dell'acquifero in presenza di un pozzo di estrazione, valutando il conseguente effetto indotto sulla piezometria.

Modellazione numerica del flusso e del trasporto per l’applicazione integrata di geotermia a bassa entalpia e bonifica

L’obbiettivo che si pone questo lavoro è quello di combinare in un unico impianto due tecnologie utilizzate per scopi differenti (impianto integrato): un impianto di climatizzazione geotermico a bassa entalpia di tipo open-loop ed un impianto di bonifica delle acque di falda di tipo Pump&Treat. Il sito selezionato per lo studio è ubicato in via Lombardia, nell’area industriale di Ozzano dell’Emilia (BO), ed è definito “Ex stabilimento Ot-Gal”: si tratta di una galvanotecnica con trattamento di metalli, dismessa alla fine degli anni ’90. Durante una precedente fase di caratterizzazione del sito condotta dalla ditta Geo-Net Srl, sono stati rilevati in falda dei superamenti delle CSC previste dal D.lgs. 152/2006 di alcuni contaminanti, in particolare Tricloroetilene (TCE) e 1.1-Dicloroetilene (1.1-DCE). Successivamente, nel 2010-2011, Geo-net Srl ha eseguito una parziale bonifica delle acque di falda attraverso l’utilizzo di un impianto Pump and Treat. Grazie a tutti i dati pregressi riguardanti i monitoraggi, le prove e i sondaggi, messi a disposizione per questo studio da Geo-Net Srl, è stato possibile eseguire una sperimentazione teorica, in forma di modellazione numerica di flusso e trasporto, dell’impianto integrato oggetto di studio. La sperimentazione è stata effettuata attraverso l’utilizzo di modelli numerici basati sul codice di calcolo MODFLOW e su codici ad esso comunemente associati, quali MODPATH e MT3DMS. L’analisi dei risultati ottenuti ha permesso di valutare in modo accurato l’integrazione di queste due tecnologie combinate in unico impianto. In particolare, la bonifica all’interno del sito avviene dopo 15 dalla messa in attività. Sono stati anche confrontati i costi da sostenere per la realizzazione e l’esercizio dell’impianto integrato rispetto a quelli di un impianto tradizionale. Tale confronto ha mostrato che l’ammortamento dell’impianto integrato avviene in 13 anni e che i restanti 7 anni di esercizio producono un risparmio economico.