Vollständige Mühlenbaukunst nach den neuesten wichtigsten Erfingungen und Verbesserungen, mit besonderer Berücksichtigung der amerikanischen und schweizerischen Kunstmühlen. Nebst Anleitung gewöhnliche Mahlmühlen nach dem amerikanischen System einzurichten. Praktisches Lehrbuch ...

Mode of access: Internet.

In plant partial noise enclosures for the mining industry /

Shipping list no.: 93-0394-P.

Additional revenue opportunities in pulp mills and their impacts on the kraft process

Although the concept of multi-products biorefinery provides an opportunity to meet the future demands for biofuels, biomaterials or chemicals, it is not assured that its implementation would improve the profitability of kraft pulp mills. The attractiveness will depend on several factors such as mill age and location, government incentives, economy of scale, end user requirements, and how much value can be added to the new products. In addition, the effective integration of alternative technologies is not straightforward and has to be carefully studied. In this work, detailed balances were performed to evaluate possible impacts that lignin removal, hemicelluloses recovery prior to pulping, torrefaction and pyrolysis of wood residues cause on the conventional mill operation. The development of mill balances was based on theoretical fundamentals, practical experience, literature review, personal communication with technology suppliers and analysis of mill process data. Hemicelluloses recovery through pre-hydrolysis of chips leads to impacts in several stages of the kraft process. Effects can be observed on the pulping process, wood consumption, black liquor properties and, inevitably, on the pulp quality. When lignin is removed from black liquor, it will affect mostly the chemical recovery operation and steam generation rate. Since mineral acid is used to precipitate the lignin, impacts on the mill chemical balance are also expected. A great advantage of processing the wood residues for additional income results from the fact that the pulping process, pulp quality and sales are not harmfully affected. For pulp mills interested in implementing the concept of multi-products biorefinery, this work has indicated possible impacts to be considered in a technical feasibility study.

Investigation of closing of Nashua, N.H., mills and operations of Textron, incorporated : hearings before a subcommittee of the Committee on Interstate and Foreign Commerce, United States Senate, Eightieth Congress, second session, on investigations of closing of Nashua, N.H., mill and operations of Textron, Incorporated.

Charles W. Tobey, chairman of subcommittee.

Ultrafine grinding of FGD and phosphogypsum with an attrition bead mill and a jet mill : optimisation and modelling of grinding and mill comparison

Fine powders of minerals are used commonly in the paper and paint industry, and for ceramics. Research for utilizing of different waste materials in these applications is environmentally important. In this work, the ultrafine grinding of two waste gypsum materials, namely FGD (Flue Gas Desulphurisation) gypsum and phosphogypsum from a phosphoric acid plant, with the attrition bead mill and with the jet mill has been studied. The ' objective of this research was to test the suitability of the attrition bead mill and of the jet mill to produce gypsum powders with a particle size of a few microns. The grinding conditions were optimised by studying the influences of different operational grinding parameters on the grinding rate and on the energy consumption of the process in order to achieve a product fineness such as that required in the paper industry with as low energy consumption as possible. Based on experimental results, the most influential parameters in the attrition grinding were found to be the bead size, the stirrer type, and the stirring speed. The best conditions, based on the product fineness and specific energy consumption of grinding, for the attrition grinding process is to grind the material with small grinding beads and a high rotational speed of the stirrer. Also, by using some suitable grinding additive, a finer product is achieved with a lower energy consumption. In jet mill grinding the most influential parameters were the feed rate, the volumetric flow rate of the grinding air, and the height of the internal classification tube. The optimised condition for the jet is to grind with a small feed rate and with a large rate of volumetric flow rate of grinding air when the inside tube is low. The finer product with a larger rate of production was achieved with the attrition bead mill than with the jet mill, thus the attrition grinding is better for the ultrafine grinding of gypsum than the jet grinding. Finally the suitability of the population balance model for simulation of grinding processes has been studied with different S , B , and C functions. A new S function for the modelling of an attrition mill and a new C function for the modelling of a jet mill were developed. The suitability of the selected models with the developed grinding functions was tested by curve fitting the particle size distributions of the grinding products and then comparing the fitted size distributions to the measured particle sizes. According to the simulation results, the models are suitable for the estimation and simulation of the studied grinding processes.

MHV tree amplitudes in super-Yang-Mills and in superstring theory

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Top: Res. and Mill of Thomas Birkett, Sec. 12, Dexter Tp. Mich.; Bottom: Res. of Agur Taylor, Sec. 24, Dexter Tp. Mich.

Dexter, Mich. residences and mill. Publication information: Chicago, Ill. : Everts & Stewart, 1874.

Electric transmission of power for mill work.

Cover-title.

Sawmills and planing mills and shingle mills /

Mode of access: Internet.

Laboratory and mill scale evaluation of biopulping of Eucalyptus grandis Hill ex Maiden with Phanerochaete chrysosporium RP-78 under non-aseptic conditions

Biopulping of Eucalyptus grandis wood chips with Phanerochaete chrysosporium RP-78 was evaluated under non-aseptic conditions in laboratory and mill wood-yard. The ability of P. chrysosporium to compete with indigenous fungi present in fresh wood chips was notorious under controlled laboratory experiments. A subsequent step involved an industrial test performed with 10-ton of fresh wood chips inoculated and maintained at 37 +/- 38 degrees C for 39 days in a biopulping pilot plant. Biotreated wood chips were pulped in a chemithermomechanical pulping mill. Net energy consumption during refining was 745 kWh ton(-1) and 610 kWh ton(-1) of processed pulp for control and biotreated wood chips, respectively. Accordingly, 18.5% net energy saving could be achieved. Biopulps contained lower shive content and had improved strength properties compared to control pulps. Tensile index improved from 25 +/- 1 N m g(-1) to 33.6 +/- 0.5 N m g(-1) and delamination strength from 217 +/- 19 kPa to 295 +/- 30 kPa.

Children's cooperative behavior and interactions in trained and untrained work groups in regular classrooms

This study examined group and individual factors that facilitate changes in cooperation and learning outcomes in trained and untrained work groups of elementary school-age children. The study had two foci. The first was to determine if the cooperative behaviors and interactions of children in classroom groups who were trained in cooperative learning skins were different from those of children who were given no training, and the second was to investigate small group interactions and achievement in these groups over time. The results showed that there were observable differences between student interactions in the two conditions and these differences were maintained over time. Compared with children in the untrained groups, those in the trained groups were consistently more cooperative and helpful to each other; they actively tried to involve each other in the learning task by using language which was more inclusive (e.g., frequent use of ''we''), and they gave more explanations to assist each other as they worked together. It appeared that as the children worked together over time, they became more responsive to the learning needs of each other. Furthermore, the children in the trained groups performed significantly better on the learning outcomes questionnaire than those in the untrained groups. (C) 1997 Society for the Study of School Psychology. Published by Elsevier Science Ltd.