Investigation of hybrid ion-exchange membranes reinforced with non-woven metal meshes for electro-dialysis applications

Salt and solvent permeations across ion-exchange membranes used in electro-dialysis are directly related to the membrane material structure and chemistry. Although primarily used for aqueous effluents desalination, electro-dialysis was recently shown to be a promising technology for industrial wastewater and co-solvent mixtures purification. The harsh working conditions imposed by these liquid effluents, including high suspended solids, require the development of more chemically and mechanically resistant membranes. In this study, commercial porous stainless steel media filters (240 μm thick) were used as a backbone to prepare hybrid ion-exchange membranes by casting ion-exchange materials within the porous metal structure. The surface of the metal reinforcements was modified by plasma treatment prior to sol-gel silane grafting to improve the interface between the metal and the ion-exchange resins. The morphology of novel hybrid materials and the interface between the metal fibers and the ion-exchange material have been characterized using techniques such as scanning electron microscopy and FTIR mapping. The thickness of the silane coating was found to lie between 1 and 2 μm while water contact angle tests performed on membrane surfaces and corrosion test behaviors revealed the formation of a thin passivating oxide layer on the material surfaces providing anchoring for the silane grafting and adequate surface energy for the proper incorporation of the ion-exchange material. The hybrid membranes desalination performance were then tested in a bench top electro-dialysis cell over a range of flow rate, current densities and salt concentration conditions to evaluate the ability of the novel hybrid materials to desalinate model streams. The performance of the hybrid membranes were benchmarked and critically compared against commercially available membranes (Selemion™). Although the salt transfer kinetics across the hybrid ion-exchange composite membranes were shown to be comparable to that of the commercial membranes, the low porosity of the stainless steel reinforcements, around 60%, was shown to impede absolute salt permeations. The hybrid ion-exchange membranes were however found to be competitive at low current density and low flow velocity desalination conditions.

Investigation of hybrid ion-exchange membranes reinforced with non-woven metal meshes for electro-dialysis applications

Salt and solvent permeations across ion-exchange membranes used in electro-dialysis are directly related to the membrane material structure and chemistry. Although primarily used for aqueous effluents desalination, electro-dialysis was recently shown to be a promising technology for industrial wastewater and co-solvent mixtures purification. The harsh working conditions imposed by these liquid effluents, including high suspended solids, require the development of more chemically and mechanically resistant membranes. In this study, commercial porous stainless steel media filters (240. μm thick) were used as a backbone to prepare hybrid ion-exchange membranes by casting ion-exchange materials within the porous metal structure. The surface of the metal reinforcements was modified by plasma treatment prior to sol-gel silane grafting to improve the interface between the metal and the ion-exchange resins. The morphology of novel hybrid materials and the interface between the metal fibers and the ion-exchange material have been characterized using techniques such as scanning electron microscopy and FTIR mapping. The thickness of the silane coating was found to lie between 1 and 2. μm while water contact angle tests performed on membrane surfaces and corrosion test behaviors revealed the formation of a thin passivating oxide layer on the material surfaces providing anchoring for the silane grafting and adequate surface energy for the proper incorporation of the ion-exchange material. The hybrid membranes desalination performance were then tested in a bench top electro-dialysis cell over a range of flow rate, current densities and salt concentration conditions to evaluate the ability of the novel hybrid materials to desalinate model streams. The performance of the hybrid membranes were benchmarked and critically compared against commercially available membranes (Selemion™). Although the salt transfer kinetics across the hybrid ion-exchange composite membranes were shown to be comparable to that of the commercial membranes, the low porosity of the stainless steel reinforcements, around 60%, was shown to impede absolute salt permeations. The hybrid ion-exchange membranes were however found to be competitive at low current density and low flow velocity desalination conditions.

Sheet Metal Examples

A wall in the Sheet Metal Department at the New York Trade School shows many examples of duct work, pipe, and decorative metal work that students learn to produce. Black and white photograph that is starting to fade.

Graduate of the Sheet Metal Department, Thomas Carlough

A 1946 graduate of the Sheet Metal Department, Thomas Carlough is pictured at work at the Triangle Sheet Metal Works, Inc. Original caption reads, "Thomas Carlough - Sheet Metal 1946. The Sheet Metal Draftsman lays out the duct work etc, for the ventilation and Air Conditioning of buildings." Black and white photograph with caption adhered to reverse.

Graduate of the Sheet Metal Department, John Loonie

John Loonie, a graduate of the Sheet Metal Department of the New York Trade School, is pictured welding at work in the Triangle Sheet Metal Works Inc. Original caption reads, "John Loonie - Sheet Metal 1955, one of the Sheet Metal workers employed at the Triangle Sheet Metal Works, qualified to weld." Black and white photograph with caption adhered to reverse.

Students in the Sheet Metal Department at Work

A view of students at work in a classroom in the Sheet Metal Department at the New York Trade School. Black and white photograph.

Graduate of the Sheet Metal Sheet Metal Department David Harning

David Harning graduated from the Sheet Metal Department in 1957 and is shown in his position as Sheet Metal Cutter at the Triangle Sheet Metal Works Inc. Original caption reads, "David Harning - Sheet Metal 1957, is shown at his bench where he lays out all types of Sheet Metal pieces. These pieces will be constructed by other Sheet Metal Workers." Black and white photograph with captioned adhered to reverse.

Stratified Sampling Applied to Estimation of the Volumetric Fraction of Alumina in Cast Metal Matrix Composites

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Elemental and Lead Isotopic Data of Copper Finds from the Singen Cemetery, Germany – a Methodological Approach to Investigate Early Bronze Age Trade Networks

We report a trace element - Pb isotope analytical (LIA) database on the "Singen Copper", a peculiar type of copper found in the North Alpine realm, from its type locality, the Early Bronze Age Singen Cemetery (Germany). What distinguishes “Singen Copper” from other coeval copper types? (i) is it a discrete metal lot with a uniform provenance (if so, can its provenance be constrained)? (ii) was it manufactured by a special, unique metallurgical process that can be discriminated from others? Trace element concentrations can give clues on the ore types that were mined, but they can be modified (more or less intentionally) by metallurgical operations. A more robust indicator are the ratios of chemically similar elements (e.g. Co/Ni, Bi/Sb, etc.), since they should remain nearly constant during metallurgical operations, and are expected to behave homogeneously in each mineral of a given mining area, but their partition amongst the different mineral species is known to cause strong inter-element fractionations. We tested the trace element ratio pattern predicted by geochemical arguments on the Brixlegg mining area. Brixlegg itself is not compatible with the Singen Copper objects, and we only report it because it is a rare instance of a mining area for which sufficient trace element analyses are available in the literature. We observe that As/Sb in fahlerz varies by a factor 1.8 above/below median; As/Sb in enargite varies by a factor of 2.5 with a 10 times higher median. Most of the 102 analyzed metal objects from Singen are Sb-Ni-rich, corresponding to “antimony-nickel copper” of the literature. Other trace element concentrations vary by > 100 times, ratios by factors > 50. Pb isotopic compositions are all significantly different from each other. They do not form a single linear array and require > 3 ore batches that certainly do not derive from one single mining area. Our data suggest a heterogeneous provenance of “Singen copper”. Archaeological information limits the scope to Central European sources. LIA requires a diverse supply network from many mining localities, including possibly Brittany. Trace element ratios show more heterogeneity than LIA; this can be explained either by deliberate selection of one particular ore mineral (from very many sources) or by processing of assorted ore minerals from a smaller number of sources, with the unintentional effect that the quality of the copper would not be constant, as the metallurgical properties of alloys would vary with trace element concentrations.

Changes in the foreign trade structure of the Russian Far East under the process of transition toward a market economy

Under the process of transition toward a market economy, the economic connections of the Russian Far East (RFE) with external regions changed from a division of labor among the regions of the USSR (Russia) to an international division of labor. This happened due to factors including the liberalization of the trade system away from a state monopoly, the presence of rich natural resources and of developed industries related to these resources, the advantage of geographically proximity to Asia-Pacific countries, and the political and economic division of the once unified national economic space during the process of transition. The economic connections of RFE with external economies changed radically under the transition toward the market economy. First, the value of foreign trade increased dramatically and the importance of foreign trade for the RFE economy increased enormously. Second, however, different territories of RFE traveled along different trajectories, due to factors involving their industrial structure and geographical conditions. Third, in recent years connections with China, in the areas of both exports and imports, have grown. Fourth, the share within exports of "fuel, mineral resources and metal" increased radically from the end of the 1990s, and the share of "machine, facilities and transportation means" increased from 2002 year within imports. Under this situation, especially since 2002, there has been a major change in the structure of foreign trade.

Metal buildings and components : an export marketing plan.

"September 1984."

Termite protection with copper shields; a handbook for architects and sheet metal workers - on the application of sheet copper for termite protection.

Col. diagrs. in pocket.

Overcoming barriers to pollution prevention in small businesses : applications in the metal parts fabricating industry /

"May 1995."--Cover.