Mécanismes neuronaux médullaires, coordination musculaire et fonction motrice chez les sujets hémiparétiques

Dans l’hémiparésie consécutive à un AVC, une coactivation anormale des extenseurs du genou et de la cheville est souvent observée à la jambe atteinte lorsque la personne tente de bouger ou encore lors de la marche. Les mécanismes sous-jacents à cette coactivation sont mal compris. Bien que l’AVC entraîne une lésion supraspinale, des évidences démontrent le dysfonctionnement de certains circuits spinaux dans l’hémiparésie. Ce projet de doctorat visait à évaluer : 1) l’excitabilité des circuits spinaux intersegmentaires projetant des extenseurs du genou aux extenseurs de la cheville et 2) si un éventuel dysfonctionnement de ces circuits dans l’hémiparésie est associé à une coactivation anormale des extenseurs du genou et de la cheville lors de contractions statiques et au cours de la marche. La première étude compare la modulation de l’activité réflexe du soléaire suite à la stimulation du nerf fémoral entre des sujets hémiparétiques et sains. Une augmentation de la facilitation hétéronyme de courte latence et une diminution de l’inhibition ultérieure du réflexe H du soléaire ont été observées chez les sujets hémiparétiques. Ces résultats démontrent un dysfonctionnement des circuits intersegmentaires propriospinaux liant le quadriceps au soléaire suite à l’AVC. La deuxième étude démontre que ces changements dans la modulation hétéronyme des sujets hémiparétiques, évaluée au moyen de la méthode complexe basée sur l’activité réflexe du soléaire, sont similaires à ceux observés lorsque la modulation est évaluée en utilisant une méthode plus simple, soit celle de l’activité volontaire du soléaire. De plus, la modulation hétéronyme évaluée par les deux méthodes est corrélée avec l’atteinte motrice à la jambe parétique. La troisième étude a permis de quantifier une augmentation de la coactivation entre les extenseurs du genou et de la cheville lors de contractions volontaires statiques chez des personnes hémiparétiques par rapport à des personnes saines. De plus, le niveau accru de la coactivation involontaire des extenseurs de la cheville lors de l’activation volontaire des extenseurs du genou s’avère corrélé avec la modulation intersegmentaire du côté parétique. La quatrième étude a utilisé un indice temporel, soit l’intervalle entre les pics d’activation électromyographique (PAI), et un indice d’amplitude de coactivation (CAI) pour quantifier une augmentation de la coactivation entre les extenseurs du genou et de la cheville lors de la marche chez des personnes hémiparétiques par rapport à des personnes saines. Ces indices sont corrélés, pour certains groupes musculaires, avec la modulation intersegmentaire modifiée du côté parétique. Finalement, des résultats préliminaires montrent que la vibration mécanique du tendon rotulien (80 Hz) réduit la facilitation intersegmentaire accrue des sujets hémiparétiques. Ce projet doctoral a permis de mettre en lumière un dysfonctionnement de circuits spinaux liant le quadriceps et le soléaire dans l’hémiparésie consécutive à un AVC. Ce changement dans les mécanismes neurophysiologiques de la moelle épinière est corrélé avec des changements fonctionnels. Ainsi, ce dysfonctionnement pourrait contribuer à la coactivation involontaire entre les extenseurs du genou et de la cheville qui fait partie intégrante de la synergie pathologique en extension souvent rencontrée à la jambe parétique lors d’efforts en statique et pendant la marche. Finalement, une étude préliminaire suggère que la vibration mécanique serait une modalité sensorielle prometteuse pour réguler l’hyperexcitabilité des circuits spinaux qui contribuerait aux atteintes motrices chez les personnes hémiparétiques.

An HMV mapping study of a pulsating jet system

A new system for the generation of hydrodynamic modulated voltammetry (HMV) is presented. This system consists of an oscillating jet produced through the mechanical vibration of a large diaphragm. The structure of the cell is such that a relatively small vibration is transferred to a large fluid flow at the jet outlet. Positioning of an electrode (Pt, 0.5 mm or 25 mu m diameter) over the exit of this jet enables the detection of the modulated flow of liquid. While this flow creates modest mass transfer rates (time averaged similar to 0.015 cm s(-1)) it can also be used to create a HMV system where a 'lock-in' approach is adopted to investigate the redox chemistry in question. This is demonstrated for the Fe(CN)(6)(3-/4-) redox system. Here 'lock-in' to the modulated hydrodynamic signal is achieved through the deployment of bespoke software. The apparatus and procedure is shown to produce a simple and efficient way to obtain the desired signal. In addition the spatial variation of the HMV signal, phase correction and time averaged current with respect to the jet orifice is presented. (C) 2008 Elsevier B.V. All rights reserved.

Projeto, construção e análise de um prototipo vibracional em escala de bancada aplicável ao tratamento de água de produção de petróleo bruto, mediante inovadora operação híbrida de adsorção e auto-flotação

A self-flotator vibrational prototype electromechanical drive for treatment of oil and water emulsion or like emulsion is presented and evaluated. Oil production and refining to obtain derivatives is carried out under arrangements technically referred to as on-shore and off-shore, ie, on the continent and in the sea. In Brazil 80 % of the petroleum production is taken at sea and area of deployment and it cost scale are worrisome. It is associated, oily water production on a large scale, carrier 95% of the potential pollutant of activity whose final destination is the environment medium, terrestrial or maritime. Although diversified set of techniques and water treatment systems are in use or research, we propose an innovative system that operates in a sustainable way without chemical additives, for the good of the ecosystem. Labyrinth adsor-bent is used in metal spirals, and laboratory scale flow. Equipment and process patents are claimed. Treatments were performed at different flow rates and bands often monitored with control systems, some built, other bought for this purpose. Measurements of the levels of oil and grease (OGC) of efluents treaty remained within the range of legal framework under test conditions. Adsorbents were weighed before and after treatment for obtaining oil impregna-tion, the performance goal of vibratory action and treatment as a whole. Treatment technolo-gies in course are referenced, to compare performance, qualitatively and quantitatively. The vibration energy consumption is faced with and without conventional flotation and self-flotation. There are good prospects for the proposed, especially in reducing the residence time, by capillary action system. The impregnation dimensionless parameter was created and confronted with consecrated dimensionless parameters, on the vibrational version, such as Weber number and Froude number in quadratic form, referred to as vibrational criticality. Re-sults suggest limits to the vibration intensity

Modeling and Experimental Aspects of Self-healing Bolted Joint through Shape Memory Alloy Actuators

Bolted joints are a form of mechanical coupling largely used in machinery due to their reliability and low cost. Failure of bolted joints can lead to catastrophic events, such as leaking, train derailments, aircraft crashes, etc. Most of these failures occur due to the reduction of the pre-load, induced by mechanical vibration or human errors in the assembly or maintenance process. This article investigates the application of shape memory alloy (SMA) washers as an actuator to increase the pre-load on loosened bolted joints. The application of SMA washer follows a structural health monitoring procedure to identify a damage (reduction in pre-load) occurrence. In this article, a thermo-mechanical model is presented to predict the final pre-load achieved using this kind of actuator, based on the heat input and SMA washer dimension. This model extends and improves on the previous model of Ghorashi and Inman [2004, "Shape Memory Alloy in Tension and Compression and its Application as Clamping Force Actuator in a Bolted Joint: Part 2 - Modeling," J. Intell. Mater. Syst. Struct., 15:589-600], by eliminating the pre-load term related to nut turning making the system more practical. This complete model is a powerful but complex tool to be used by designers. A novel modeling approach for self-healing bolted joints based on curve fitting of experimental data is presented. The article concludes with an experimental application that leads to a change in joint assembly to increase the system reliability, by removing the ceramic washer component. Further research topics are also suggested.

Fenômenos não-lineares, incluindo-se os não-ideias, em captura de energia utilizando-se dispositivos piezoelétricos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo do alívio das tensões residuais, em peça estampada, pela técnica de vibrações mecânicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Utilização de materiais piezelétricos (PZTS) para coleta e armazenamento de energia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Diagnose de falhas via observadores de estado em sistemas mecânicos com absorvedores dinâmicos de vibrações tipo lâmina vibrante

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Controle ativo de vibrações em estruturas espaciais tipo treliças usando controladores IMSC

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Projeto de controladores robustos para aplicações em estruturas inteligentes utilizando desigualdades matriciais lineares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uso de absorvedores de vibrações eletromecânicos lineares e não-lineares em sistemas não-lineares e não-ideais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Gerenciamento do processo de calibração secundária de acelerômetros por meio de uma aplicação de banco de dados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Colheita de energia usando dispositivos baseados em materiais piezoelétrico

Recently, research on energy harvesting has increased substantially. Many researchers have concentrated their efforts to find the best configuration for these systems and to optimize their output power. In the process of energy harvesting, the electric energy is obtained by converting mechanics energy created by an environment vibration source by a transducer, for example, a thin piezoceramic film. That vibration source is, for example, a beam suffering some mechanic force able to generate a vibration in it, an oscillating beam is the best properly used example. Different mechanisms of electromechanical coupling have been developed to harvesting devices, and a particular interest has been given to the use of models that transform the mechanical vibration into electrical current using a piezoelectric element. In this paper we propose a model to energy harvesting from vibrations, from an oscillating beam, including non-linearities in the piezoelectric coupling and a non-ideal excitation in the material. From this model, it was developed a system to obtain some results about the harvested power by the material. It was demonstrated that the power captured was influenced by the effect of the nonlinearities of the piezoelectric coupling, modifying the system dynamic behavior

Efeitos da vibração, do plano de oscilação e de uma sessão de uso da haste vibratória sobre o controle postural de mulheres idosas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Impactos causados por vibrações mecânicas em chapas de alumínio no processo de laminação a frio

This paper purpose is to analyze one of the main problems faced by cold rolling industry of the current time, the mechanical vibration. Factors such as strips with high velocity in order to increase the productivity and thickness becoming thinner and thinner cause the vibrations to be present at all times during rolling. These market requirements also drive the industry for technology development and thus bring the challenges that the operation of a new modern equipment and more powerful. The initial purpose is to analyze the forces that cause vibration in a rolling mill type four high with two stands, where is desirable to identify the origins of these vibrational forces to make possible dismiss them or at least control its intensity, in order to prevent damage in the rolling mill and ensure product quality to the customer. For it, will be used instruments to record and store the vibrations that occur during the lamination process. With this data will be able to analyze the characteristics of the vibrations and act at your elimination. At the end of the work is expected to demonstrate how important the critical view of the engineer in the analysis of graphics combined with the calculations of the natural vibration frequency and engagement of key parts of the laminator. With these two tools at hand, will be possible to increase the productivity of the rolling mill and act preventively in maintenance, thereby reducing your downtime and increasing its performance and efficiency