Magnetic properties of Fe-Cu-Nb-Si-B nanocrystaliine magnetic alloys

Several ribbons of composition Fe73.5Cu1Nb 3Si16.5B6 and Fe73.5Cu1 Nb3Si13.5B9 were prepared by annealing the as-quenched samples between 525°C and 700°C; which induced nucleation of nanocrystallites of Fe bcc-type composition. Mean grain sizes were obtained from X-ray diffraction. Static magnetic properties were measured with both a Magnet Physik Hysteresis-Graph (up to 200 Oe) and a SHE SQUID magnetometer (up to 50 kOe). Soft magnetic parameters (coercive field and initial permeability) were very sensitive to grain size. The ZFC magnetization at low field showed a broad peak at a temperature TM, thus signalling a certain distribution of nanocrystalline sizes, and TM strongly decreased when the mean grain size decreased. Isothermal magnetization curves at low temperature showed the expected asymptotic behavior of a random magnet material at low and high fields.

Nanocrystalline M-type hexaferrite powders: preparation, geometric and magnetic propertiess

Co-Ti-Sn-Ge substituted M-type bariumhexaferrite powders with mean grain sizes between about 10 nm and about 1 ¿m and a narrow size distribution were prepared reproducibly by means of a modified glass crystallization method. At annealing temperatures between 560 and 580°C of the amorphous flakes nanocrystalline particles grow. They behave superparamagnetically at room temperature and change into stable magnetic single domains at lower temperatures. The magnetic volume of the powders is considerably less than the geometric one. However, the effective anisotropy fields are larger by a Factor of two to three.

Adsoption-induced restructuring of gold nanochains

The chemical properties of single-atomic chains of gold atoms are investigated using density functional calculations. The nanochains are shown to be unusually chemically active with strong chemisorption of oxygen atoms and carbon monoxide. The chemisorption energies vary significantly with the strain/stress conditions for the chain. Oxygen atoms are found to energetically prefer to get incorporated into a chain forming a new type of gold-oxygen nanochain with a conductance of one quantum unit. We suggest that the long bond lengths observed in electron microscopy investigations of gold chains can be due to oxygen incorporation.

Influence of elastic anisotropy on structural nanoscale textures

We study the influence of elastic anisotropy on nanoscale precursor textures that exist in some shape-memory alloys and show that tweed occurs in the limit of high elastic anisotropy while a nanocluster phase-separated state occurs for values of anisotropy inhibiting the formation of martensite. These results are consistent with specific heat data, elastic constant measurements, and zero-field cooling or field cooling experiments in nonstoichiometric NiTi alloys.

Lysine-based surfactants in nanovesicle formulations: the role of cationic charge position and hydrophobicity in in vitro cytotoxicity and intracellular delivery

Understanding nanomaterial interactions within cells is of increasing importance for assessing their toxicity and cellular transport. Here, we developed nanovesicles containing bioactive cationic lysine-based amphiphiles, and assessed whether these cationic compounds increase the likelihood of intracellular delivery and modulate toxicity. We found different cytotoxic responses among the formulations, depending on surfactant, cell line and endpoint assayed. The induction of mitochondrial dysfunction, oxidative stress and apoptosis were the general mechanisms underlying cytotoxicity. Fluorescence microscopy analysis demonstrated that nanovesicles were internalized by HeLa cells, and evidenced that their ability to release endocytosed materials into cell cytoplasm depends on the structural parameters of amphiphiles. The cationic charge position and hydrophobicity of surfactants determine the nanovesicle interactions within the cell and, thus, the resulting toxicity and intracellular behavior after cell uptake of the nanomaterial. The insights into some toxicity mechanisms of these new nanomaterials contribute to reducing the uncertainty surrounding their potential health hazards.

Quantum wire with periodic serial structure

Electron wave motion in a quantum wire with periodic structure is treated by direct solution of the Schrödinger equation as a mode-matching problem. Our method is particularly useful for a wire consisting of several distinct units, where the total transfer matrix for wave propagation is just the product of those for its basic units. It is generally applicable to any linearly connected serial device, and it can be implemented on a small computer. The one-dimensional mesoscopic crystal recently considered by Ulloa, Castaño, and Kirczenow [Phys. Rev. B 41, 12 350 (1990)] is discussed with our method, and is shown to be a strictly one-dimensional problem. Electron motion in the multiple-stub T-shaped potential well considered by Sols et al. [J. Appl. Phys. 66, 3892 (1989)] is also treated. A structure combining features of both of these is investigated

Quantum dynamics of crystals of molecular nanomagnets inside a resonant cavity

It is found that crystals of molecular nanomagnets exhibit enhanced magnetic relaxation when placed inside a resonant cavity. A strong dependence of the magnetization curve on the geometry of the cavity has been observed, providing indirect evidence of the coherent microwave radiation by the crystals. A similar dependence has been found for a crystal placed between the Fabry-Perot superconducting mirrors.

Pulsed-field studies of the magnetization reversal in molecular nanomagnets

We report experimental studies of crystals of Mn12 molecular magnetic clusters in pulsed magnetic fields with sweep rates up to 410^3 T/s . The steps in the magnetization curve are observed at fields that are shifted with respect to the resonant field values. The shift systematically increases as the rate of the field sweep goes up. These data are consistent with the theory of the collective dipolar relaxation in molecular magnets.

Adsoption-induced restructuring of gold nanochains

The chemical properties of single-atomic chains of gold atoms are investigated using density functional calculations. The nanochains are shown to be unusually chemically active with strong chemisorption of oxygen atoms and carbon monoxide. The chemisorption energies vary significantly with the strain/stress conditions for the chain. Oxygen atoms are found to energetically prefer to get incorporated into a chain forming a new type of gold-oxygen nanochain with a conductance of one quantum unit. We suggest that the long bond lengths observed in electron microscopy investigations of gold chains can be due to oxygen incorporation.

Production of carbon nanotubes by PECVD and their applications to supercapacitors

Màster en Nanociència i Nanotecnologia

Characterization of CNTs and CNTs/MnO2 composite for supercapacitor application

Màster en Nanociència i Nanotecnologia

Desenvolupament i caracterització d'aliatges de base ferro produïts per aliatge mecànic i solidificació ràpida

L'objectiu general d'aquest treball és l'obtenció de nous materials nanoestructurats magnètics tous produïts mitjançant la tècnica de l'aliatge mecànic. Forma part d'un projecte més ampli de desenvolupament d'aquests tipus d'aliatges amb altres tècniques, com les de solidificació ràpida, i la seva posterior molturació i compactació per a l'aplicació a la indústria pulverimetal·lúrgica. Aquests materials tindran una estructura amorfa i/o nanocristal·lina que comportarà una millora de les seves propietats magnètiques. Els objectius particulars d'aquest treball són: - Síntesi d'aliatges de Fe-Ni-Zr-B-(Co), Fe-Nb-B-(Cu), i Fe-Ni-Nb-B mitjançant aliatge mecànic. Es parteix de precursors cristal·lins i es tracta d'obtenir un aliatge bàsicament nanocristal·lí. En concret, es pretén obtenir aliatges: ·Amb una alta estabilitat tèrmica que afavoreixi posteriors estudis de consolidació. ·Amb la presència de nanocristalls de reduïdes dimensions o d'una fase amorfa que permeti posteriors tractaments tèrmics per a produir aliatges de nanoestructura controlada. -Comparació entre les mostres produïdes per aliatge mecànic amb diferents micromolins de les mostres Fe-Nb-B. Els micromolins utilitzats són un P7 i un SPEX 8000 -Estudi de la influència dels diferents precursors i de la quantitat relativa dels mateixos que s'ha utilitzat per a cada mostra, concretament: ·La substitució en els aliatges de Fe-Nb-B de Fe per Ni, tot i que interessa que els aliatges tinguin una alta quantitat de ferro perquè tingui millors propietats magnètiques. ·La substitució en els aliatges de Fe-Ni-Zr-B de Fe per Co. ·La inclusió de Cu en les mostres Fe-Nb-B ·La comparació entre els aliatges amb Nb i amb Ni-Zr -Modelització del comportament termodinàmic d'equilibri dels compostos Fe-Nb-B, mitjançant software de minimització de l'energia lliure dels diferents elements. S'han utilitzat una sèrie de tècniques analítiques per a avaluar l'estabilitat tèrmica i realitzar la caracterització estructural dels aliatges obtinguts. Anàlisi de l'estabilitat tèrmica mitjançant anàlisi calorimètrica diferencial (DSC) i termogravimetria (TG). També s'analitzarà la cinètica de cristal·lització mitjançant tractaments isotèrmics i dinàmics. -Anàlisi morfològic de les diferents mostres per microscòpia electrònica de rastreig (SEM) i caracterització estructural de les diferents fases presents i de les diferents microestructures obtingudes mitjançant difracció de raigs X XRD)i microscòpia electrònica de transmissió(TEM). S'identificaran les diferents fases presents i es calcularan els diferents paràmetres de cel·la, així com la dimensió de les microestructures. L'anàlisi microestructural es complementarà amb algunes mesures 'espectroscòpia Mössbauer de transmissió (TMS)