Effect of freeze-drying on the mechanical, physical and morphological properties of glutaraldehyde-treated bovine pericardium: evaluation of freeze-dried treated bovine pericardium properties

Purpose: Biomaterials have been widely used in the field of regenerative medicine. Bovine pericardium tissue has been successfully used as a bioprosthetic material in manufacturing heart valves, but studies concerning the tissue are ongoing in order to improve its storage, preservation and transportation. This article provides an overview of the characteristics of bovine pericardium tissue chemically treated after the freeze-drying process. These characteristics are essential to evaluate the changes or damage to the tissue during the process. Methods: The mechanical properties of the tissue were analyzed by three different methods due to its anisotropic characteristics. The physical properties were analyzed by a colorimetric method, while the morphological properties were evaluated by scanning electron microscopy (SEM). Results: The freeze-dried bovine pericardium showed no significant change in its mechanical properties. There was no significant change in the elasticity of the tissue (p > 0.05) and no color change. In addition, SEM analysis showed that the freeze-dried samples did not suffer structural collapse. Conclusions: It was concluded that glutaraldehyde-treated bovine pericardium tissue showed no significant change in its properties after the freeze-drying process.

Neighborhood and Efficiency in Manufacturing in Brazilian Regions: A Spatial Markov Chain Analysis

This paper analyzes the geography of regional competitiveness in manufacturing in Brazil. The authors estimate stochastic frontiers to calculate regional efficiency of representative firms in 137 regions in the period 2000-2006, in four sectors defined by technological intensity. The efficiency results are analyzed using Markov Spatial Transition Matrices to provide insights into the transition of regions between efficiency levels, considering their local spatial context. The results indicate that geography plays an important role in manufacturing competitiveness. In particular, regions with more competitive neighbors are more likely to improve their relative efficiency (pull effect) over time, and regions with less competitive neighbors are more likely to lose relative efficiency (drag effect). The authors find that the pull effect is stronger than the drag effect.

Economic performance of Brazilian manufacturing firms: a counterfactual analysis of innovation impacts

This article assesses if innovators outperform non-innovators in Brazilian manufacturing during 1996-2002. To do so, we begin with a simple theoretical model and test the impacts of technological innovation (treatment) on innovating firms (treated) by employing propensity score matching techniques. Correcting for the survivorship bias in the period, it was verified that, on an average, the accomplishment of technological innovations produces positive and significant impacts on the employment, the net revenue, the labor productivity, the capital productivity, and market share of the firms. However, this result was not observed for the mark-up. Especially, the net revenue reflects more robustly the impacts of the innovations. Quantitatively speaking, innovating firms experienced a 10.8-12.5 percentage points (p.p. henceforth) higher growth on employment, a 18.1-21.7 p.p. higher growth on the net revenue, a 10.8-11.9 p.p. higher growth on labor productivity, a 11.8-12.0 p.p. higher growth on capital productivity, and a 19.9-24.3 p.p. higher growth on their market share, relative to the average of the non-innovating firms in the control group. It was also observed that the conjunction of product and process innovations, relative to other forms of innovation, presents the stronger impacts on the performance of Brazilian firms.

Trade and environment: Evidence from China's manufacturing sector

This paper focusing on the Chinese manufacturing sector assesses the environmental impact of trade liberalization in China. The results show that China's experience with the trade liberalization-environment nexus is consistent with international evidence. On one hand, trade liberalization has had various positive effects on the environment. Firstly, it promoted specialization in areas of comparative advantage, which, in general, included industries that contributed less to environmental degradation. Secondly, it allowed China to access and adopt the best international practices in pollution abatement technology. Thirdly, it enabled China to transfer environmental costs to other countries by importing intermediate products whose production contributed to environmental degradation. On the other hand, these positive effects were overwhelmed by a negative scale effect, which was the result of a huge increase in the demand for Chinese exports. The paper concludes that if China is to prevent pollution from reaching a critical threshold, environmental regulations need to be tightened. Copyright (C) 2002 John Wiley & Sons, Ltd and ERP Environment.

Effect of hole drilling at the overlap on the strength of single-lap joints

Bonded unions are gaining importance in many fields of manufacturing owing to a significant number of advantages to the traditional fastening, riveting, bolting and welding techniques. Between the available bonding configurations, the single-lap joint is the most commonly used and studied by the scientific community due to its simplicity, although it endures significant bending due to the non-collinear load path, which negatively affects its load bearing capabilities. The use of material or geometric changes in single-lap joints is widely documented in the literature to reduce this handicap, acting by reduction of peel and shear peak stresses at the damage initiation sites in structures or alterations of the failure mechanism emerging from local modifications. In this work, the effect of hole drilling at the overlap on the strength of single-lap joints was analyzed experimentally with two main purposes: (1) to check whether or not the anchorage effect of the adhesive within the holes is more preponderant than the stress concentrations near the holes, arising from the sharp edges, and modification of the joints straining behaviour (strength improvement or reduction, respectively) and (2) picturing a real scenario on which the components to be bonded are modified by some external factor (e.g. retrofitting of decaying/old-fashioned fastened unions). Tests were made with two adhesives (a brittle and a ductile one) varying the adherend thickness and the number, layout and diameter of the holes. Experimental testing showed that the joints strength never increases from the un-modified condition, showing a varying degree of weakening, depending on the selected adhesive and hole drilling configuration.

Effect of fungal colonization on mechanical performance of cork

The industrialization of traditional processes relies on the scientific ability to understand the empirical evidence associated with traditional knowledge. Cork manufacturing includes one operation known as stabilization, where humid cork slabs are extensively colonized by fungi. The implications of fungal growth on the chemical quality of cork through the analysis of putative fungal metabolites have already been investigated. However, the effect of fungal growth on the mechanical properties of cork remains unexplored. This study investigated the effect of cork colonization on the integrity of the cork cell walls and their mechanical performance. Fungal colonization of cork by Chrysonilia sitophila, Mucor plumbeus Penicillium glabrum, P. olsonii, and Trichoderma longibrachiatum was investigated by microscopy. Growth occurred primarily on the surface of the cork pieces, but mycelium extended deeper into the cork layers, mostly via lenticular channels and by hyphal penetration of the cork cell wall. In this first report on cork decay in which specific correlation between fungal colonization and mechanical proprieties of the cork has been investigated, all colonizing fungi except C. sitophila, reduced cork strength, markedly altering its viscoelastic behaviour and reducing its Young’s modulus.

Effect of Adherend Recessing on the Tensile Strength of Single Lap Joints

Bonded joints are gaining importance in many fields of manufacturing owing to a significant number of advantages to the traditional methods. The single lap joint (SLJ) is the most commonly used method. The use of material or geometric changes in SLJ reduces peel and shear peak stresses at the damage initiation sites. In this work, the effect of adherend recessing at the overlap edges on the tensile strength of SLJ, bonded with a brittle adhesive, was experimentally and numerically studied. The recess dimensions (length and depth) were optimized for different values of overlap length (LO), thus allowing the maximization of the joint’s strength by the reduction of peak stresses at the overlap edges. The effect of recessing was also investigated by a finite element (FE) analysis and cohesive zone modelling (CZM), which allowed characterizing the entire fracture process and provided joint strength predictions. For this purpose, a static FE analysis was performed in ABAQUS1 considering geometric nonlinearities. In the end, the experimental and FE results revealed the accuracy of the FE analysis in predicting the strength and also provided some design principles for the strength improvement of SLJ using a relatively simple and straightforward technique.

A territorial approach to firm entry: The effect of city size

This paper concerns the effects of territorial factors on the processes involved in the creation of manufacturing firms in Spanish cities. Most contributions have focused on regional factors rather than urban ones. Here we assume that it is possible to identify certain urban factors that attract new firms. We use data for the entry of firms in Spanish manufacturing industries between 1994 and 2002. This paper contributes to the existing literature on market entry. Key words: cities, regions, firm entry and Spanish economy. JEL: R0, R12, L60

The spatial effect of intra-metropolitan agglomeration economies

This study deals with the role of spatial accessibility to agglomeration economies in the change in spatial structure of industrial employment for the case of the Barcelona Metropolitan Region of Barcelona (BMR). Using the growth in gross density of municipal employment between 1986 and 1996 for seven manufacturing industries as an indicator of changes in the spatial structure of employment, an exploration is made of the spatial impact of agglomeration economies operating on a local scale the municipality and three areas 5, 8 and 12 kilometres away surrounding the municipality itself - , agglomeration economies emerging from CBD and the main specialised subcentres in the region, and the network economies associated with the total jobs in the region, access to which depends on the distance from the main transport infrastructures

New business formation and employment growth: some evidence for the Spanish manufacturing industry

This paper explores the effects of new business formation on employment growth in Spanish manufacturing industries. New firms are believed to make an important contribution to economic growth but the extent of this contribution is unclear. We consider time lags of new firm formation as explanatory variables of employment change and identify how long the effect of new firm entries on employment lasts. Our main results show that the effects of new business formation are positive in the short term, negative in the medium term and positive in the long term, thus confirming the existence of indirect supply-side effects found in similar studies for other countries. Key words: regional growth, firm entry, time lags and Spanish economy. JEL classifications: L00, L60, R11, R12

Productivity growth and competition in Spanish manufacturing firms: What has happened in recent years?

This paper addresses the issue of the relationship between productivity and market competition. In comparison to the economies of other European countries, the Spanish economy has been growing, while productivity growth has stagnated. Here we provide empirical evidence about the relationship between productivity and market competition from Spanish manufacturing firms at firm level between 1994 and 2004. Correcting for selection bias, our study pays special attention to the patterns of productivity growth between openness and non-openness firms. When market competition increases the effect on firms operating in domestic markets is positive but when the level of competition is high incentives to invest in innovation and productivity gains disappear. The empirical relationship between competition and productivity is an inverted U-shape, where productivity growth is highest at intermediate levels of competition. The productivity growth of firms operating in international markets is higher than that of non-openness firms, but when market competition rises they moderate their productivity growth. Our empirical results suggest that the correct competition policy in the Spanish economy should remove the barriers to competition in internal markets in order to increase the incentives for manufacturing firms to invest in innovation and productivity growth.

On the effect of the geographical scope of agglomeration economies on firm location

This article analyses how agglomeration economies shaped the location decisions of new manufacturing start-ups in Catalan municipalities in 2001-2005. We estimate whether the locations of new firms are spatially autocorrelated and whether this phenomenon is industry-specific. Our aim is to estimate the geographical scope of agglomeration economies on firm entries. The data set comes from a compulsory register of manufacturing establishments (REIC: Catalan Manufacturing Establishments Register). JEL classification: R1, R3 Keywords: firm location; spatial autocorrelation

Innovation or Imitation? The effect of spillovers and competitive pressure on firms' R&D strategy choice

This article provides a theoretical and empirical analysis of a firm's optimal R&D strategy choice. In this paper a firm's R&D strategy is assumed to be endogenous and allowed to depend on both internal firms. characteristics and external factors. Firms choose between two strategies, either they engage in R&D or abstain from own R&D and imitate the outcomes of innovators. In the theoretical model this yields three types of equilibria in which either all firms innovate, some firms innovate and others imitate, or no firm innovates. Firms'equilibrium strategies crucially depend on external factors. We find that the efficiency of intellectual property rights protection positively affects firms'incentives to engage in R&D, while competitive pressure has a negative effect. In addition, smaller firms are found to be more likely to become imitators when the product is homogeneous and the level of spillovers is high. These results are supported by empirical evidence for German .rms from manufacturing and services sectors. Regarding social welfare our results indicate that strengthening intellectual property protection can have an ambiguous effect. In markets characterized by a high rate of innovation a reduction of intellectual property rights protection can discourage innovative performance substantially. However, a reduction of patent protection can also increase social welfare because it may induce imitation. This indicates that policy issues such as the optimal length and breadth of patent protection cannot be resolved without taking into account specific market and firm characteristics. Journal of Economic Literature Classification Numbers: C35, D43, L13, L22, O31. Keywords: Innovation; imitation; spillovers; product differentiation; market competition; intellectual property rights protection.

Public infrastructure and the performance of manufacturing industries: short-and long-run

We present a theoretical framework for determining the short- and long-run effects of infrastructure. While the short-run effects have been the focus of most previous studies, here we derive long-run elasticities by taking into account the adjustment of quasi-fixed inputs to their optimum levels. By considering the impact of infrastructure on private investment decisions, we observe how, apart from the direct effect on costs in the short-run, infrastructure exerts an indirect source of influence in the long-run through their effect on private capital. The model is applied to manufacturing industries in the Spanish regions

The mechanisms of agglomeration: Evidence from the effect of inter-industry relations on the location of new firms

The objective of this paper is to explore the relative importance of each of Marshall's agglomeration mechanisms by examining the location of new manufacturing firms in Spain. In particular, we estimate the count of new firms by industry and location as a function of (pre-determined) local employment levels in industries that: 1) use similar workers (labor market pooling); 2) have a customer- supplier relationship (input sharing); and 3) use similar technologies (knowledge spillovers). We examine the variation in the creation of new firms across cities and across municipalities within large cities to shed light on the geographical scope of each of the three agglomeration mechanisms. We find evidence of all three agglomeration mechanisms, although their incidence differs depending on the geographical scale of the analysis.