A simple, robust and rapid approach to detect carbapenemases in Gram-negative isolates by MALDI-TOF mass spectrometry: validation with triple quadripole tandem mass spectrometry, microarray and PCR.

Carbapenemases should be accurately and rapidly detected, given their possible epidemiological spread and their impact on treatment options. Here, we developed a simple, easy and rapid matrix-assisted laser desorption ionization-time of flight (MALDI-TOF)-based assay to detect carbapenemases and compared this innovative test with four other diagnostic approaches on 47 clinical isolates. Tandem mass spectrometry (MS-MS) was also used to determine accurately the amount of antibiotic present in the supernatant after 1 h of incubation and both MALDI-TOF and MS-MS approaches exhibited a 100% sensitivity and a 100% specificity. By comparison, molecular genetic techniques (Check-MDR Carba PCR and Check-MDR CT103 microarray) showed a 90.5% sensitivity and a 100% specificity, as two strains of Aeromonas were not detected because their chromosomal carbapenemase is not targeted by probes used in both kits. Altogether, this innovative MALDI-TOF-based approach that uses a stable 10-μg disk of ertapenem was highly efficient in detecting carbapenemase, with a sensitivity higher than that of PCR and microarray.

Applications of MALDI-TOF mass spectrometry in clinical diagnostic microbiology.

Until recently, microbial identification in clinical diagnostic laboratories has mainly relied on conventional phenotypic and gene sequencing identification techniques. The development of matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) devices has revolutionized the routine identification of microorganisms in clinical microbiology laboratories by introducing an easy, rapid, high throughput, low-cost, and efficient identification technique. This technology has been adapted to the constraint of clinical diagnostic laboratories and has the potential to replace and/or complement conventional identification techniques for both bacterial and fungal strains. Using standardized procedures, the resolution of MALDI-TOF MS allows accurate identification at the species level of most Gram-positive and Gram-negative bacterial strains with the exception of a few difficult strains that require more attention and further development of the method. Similarly, the routine identification by MALDI-TOF MS of yeast isolates is reliable and much quicker than conventional techniques. Recent studies have shown that MALDI-TOF MS has also the potential to accurately identify filamentous fungi and dermatophytes, providing that specific standardized procedures are established for these microorganisms. Moreover, MALDI-TOF MS has been used successfully for microbial typing and identification at the subspecies level, demonstrating that this technology is a potential efficient tool for epidemiological studies and for taxonomical classification.

Los adhesivos empleados en el entelado de carteles modernos. Uso de la Espectrometría de Masas de Ionización/Desorción por Láser asistida por Matriz y analizador de Tiempo de Vuelo (MALDI-TOF-MS) para la identificación de éteres de celulosa

"XVIII Congreso Internacional de Conservación y Restauración de Bienes Culturales - 18th International Meeting on Heritage Conservation", Granada 9 al 11 novembre de 2011

Los adhesivos empleados en el entelado de carteles modernos. Uso de la Espectrometría de Masas de Ionización/Desorción por Láser asistida por Matriz y analizador de Tiempo de Vuelo (MALDI-TOF-MS) para la identificación de éteres de celulosa

"XVIII Congreso Internacional de Conservación y Restauración de Bienes Culturales - 18th International Meeting on Heritage Conservation", Granada 9 al 11 novembre de 2011

Los adhesivos empleados en el entelado de carteles modernos. Uso de la Espectrometría de Masas de Ionización/Desorción por Láser asistida por Matriz y analizador de Tiempo de Vuelo (MALDI-TOF-MS) para la identificación de éteres de celulosa

"XVIII Congreso Internacional de Conservación y Restauración de Bienes Culturales - 18th International Meeting on Heritage Conservation", Granada 9 al 11 novembre de 2011

Développement d’une méthode SPRi-MALDI-IMS pour la quantification et l’identification des protéines dans des empreintes de tissus biologiques

Plusieurs tests médicaux, comme celui du dépistage du cancer du sein, se basent sur l’observation de section tissulaire sous un microscope. Ces tests se basent sur l’interprétation d’un spécialiste et les résultats peuvent varier d’un expert à un autre dû la subjectivité des observations. L’utilisation d’une technique analytique offrant une quantification et une identification de cibles moléculaires dans une section tissulaire permettrait aux experts de produire des diagnostics plus objectifs et diminuerait possiblement le nombre de faux diagnostics. Les travaux présentés dans ce mémoire portent sur le développement d’une technique SPRi-MALDI-IMS permettant l’imagerie en deux dimensions de protéines contenues dans une section tissulaire. La MALDI-IMS est la technique de choix pour l’imagerie de biomolécules dans les sections tissulaires. Par contre, elle ne parvient pas à elle seule à quantifier de façon absolue le matériel adsorbé à la surface. Donc, le couplage de la MALDI-IMS avec la SPRi permet la quantification absolue de protéines en deux dimensions et crée une technique répondant aux besoins des experts médicaux. Pour ce faire, nous avons étudié, l’effet de la chimie de surface sur la nature et la quantité de matériel adsorbé à la surface du capteur. De plus, la cinétique de transfert des protéines du tissu vers le capteur a dû être optimisée afin de produire des empreintes correspondant au tissu d’origine, afin d’atteindre la gamme dynamique des instruments SPRi et MALDI-IMS. La technique résultante de ces optimisations permet d’obtenir les premières images quantitatives et qualitatives de protéines en deux dimensions d’une seule section tissulaire.

A well-characterised peak identification list of MALDI MS profile peaks for human blood serum

MALDI MS profiling, using easily available body fluids such as blood serum, has attracted considerable interest for its potential in clinical applications. Despite the numerous reports on MALDI MS profiling of human serum, there is only scarce information on the identity of the species making up these profiles, particularly in the mass range of larger peptides. Here, we provide a list of more than 90 entries of MALDI MS profile peak identities up to 10 kDa obtained from human blood serum. Various modifications such as phosphorylation were detected among the peptide identifications. The overlap with the few other MALDI MS peak lists published so far was found to be limited and hence our list significantly extends the number of identified peaks commonly found in MALDI MS profiling of human blood serum.

Introduction of 4-chloro-alpha-cyanocinnamic acid liquid matrices for high sensitivity UV-MALDI MS

Matrix-assisted laser desorption/ionization (MALDI) is a key ionization technique in mass spectrometry (MS) for the analysis of labile macromolecules. An important area of study and improvements in relation to MALDI and its application in high-sensitivity MS is that of matrix design and sample preparation. Recently, 4-chloro-alpha-cyanocinnamic acid (ClCCA) has been introduced as a new rationally designed matrix and reported to provide an improved analytical performance as demonstrated by an increase in sequence coverage of protein digests obtained by peptide mass mapping (PMM) (Jaskolla, T. W.; et al. Proc. Natl. Acad. Sci. U.S.A. 2008, 105, 12200-12205). This new matrix shows the potential to be a superior alternative to the commonly used and highly successful alpha-cyano-4-hydroxycinnamic acid (CHCA). We have taken this design one step further by developing and optimizing an ionic liquid matrix (ILM) and liquid support matrix (LSM) using ClCCA as the principle chromophore and MALDI matrix compound. These new liquid matrices possess greater sample homogeneity and a simpler morphology. The data obtained from our studies show improved sequence coverage for BSA digests compared to the traditional CHCA crystalline matrix and for the ClCCA-containing ILM a similar performance to the ClCCA crystalline matrix down to 1 fmol of BSA digest prepared in a single MALDI sample droplet with current sensitivity levels in the attomole range. The LSMs show a high tolerance to contamination such as ammonium bicarbonate, a commonly used buffering agent.

Liquid matrix deposition on conductive hydrophobic surfaces for tuning and quantitation in UV-MALDI mass spectrometry

With its highly fluctuating ion production matrix-assisted laser desorption/ionization (MALDI) poses many practical challenges for its application in mass spectrometry. Instrument tuning and quantitative ion abundance measurements using ion signal alone depend on a stable ion beam. Liquid MALDI matrices have been shown to be a promising alternative to the commonly used solid matrices. Their application in areas where a stable ion current is essential has been discussed but only limited data have been provided to demonstrate their practical use and advantages in the formation of stable MALDI ion beams. In this article we present experimental data showing high MALDI ion beam stability over more than two orders of magnitude at high analytical sensitivity (low femtomole amount prepared) for quantitative peptide abundance measurements and instrument tuning in a MALDI Q-TOF mass spectrometer. Samples were deposited on an inexpensive conductive hydrophobic surface and shrunk to droplets <10 nL in size. By using a sample droplet <10 nL it was possible to acquire data from a single irradiated spot for roughly 10,000 shots with little variation in ion signal intensity at a laser repetition rate of 5-20 Hz.

MALDI MS

Matrix-assisted laser desorption/ionization (MALDI) is a key technique in mass spectrometry (MS)-based proteomics. MALDI MS is extremely sensitive, easy-to-apply, and relatively tolerant to contaminants. Its high-speed data acquisition and large-scale, off-line sample preparation has made it once again the focus for high-throughput proteomic analyses. These and other unique properties of MALDI offer new possibilities in applications such as rapid molecular profiling and imaging by MS. Proteomics and its employment in Systems Biology and other areas that require sensitive and high-throughput bioanalytical techniques greatly depend on these methodologies. This chapter provides a basic introduction to the MALDI methodology and its general application in proteomic research. It describes the basic MALDI sample preparation steps and two easy-to-follow examples for protein identification including extensive notes on these topics with practical tips that are often not available in the Subheadings 2 and 3 of research articles.