Adoção da tecnologia da informação em organizações rurais: O caso da pecuária de corte

Adoption of technology. Farm management. Beef cattle breeding. Information technology.This research is aimed to study the use and the diffusion of IT in the beef cattle breeding from the analysis of the factors that have influenced its adoption as well as to describe resources, procedures, and necessary actions for IT operation using case studies in rural properties classified by the innovativeness degree. This study was carried out in two stages, quantitative and qualitative. In the first stage, a survey with producers was conducted. Information concerning the different technologies adopted enabled to identify the level of innovativeness of those producers. They were classified according to the similarities of the technological position. The second stage analyzed experiences, opinions, and perspectives regarding the technology integrated to the productive system. Two rural cattle breeding farms were analyzed in each category through personal interviews totalizing ten case studies. The results indicated the reasons for the adoption or rejection of a certain IT by the producers allowing for the identification of the reasons why some producers have adopted it more quickly than others. It was possible to understand the rural organization modifications due to IT adoption, for example, managerial skills improvements. In general, the processes have been improved and become easier bringing positive effects to several areas including human resources and the enterprise's image in the market.

Influência de protocolos de jateamento na rugosidade da superfície de uma cerâmica de zircônia tetragonal parcialmente estabilizada por ítria

Objective: To evaluate the influence of different air abrasion protocols on the surface roughness of an yttria-stabilized polycrystalline tetragonal zirconia) (Y-TZP) ceramic, as well as the surface topography of the ceramic after the treatment. Method: Fifty-four specimens (7.5×4×7.5mm) obtained from two ceramic blocks (LAVA, 3M ESPE) were flattened with fine-grit sandpaper and subjected to sintering in the ceramic system's specific firing oven. Next, the specimens were embedded in acrylic resin and the surfaces to be treated were polished in a polishing machine using sandpapers of decreasing abrasion (600- to 1,200-grit) followed by felt discs with 10μm and 3μm polishing pastes and colloidal silica. The specimens were then randomly assigned to 9 groups, according to factors particle and pressure(n=6): Gr1- control; Gr2- Al 2O 3(50μm)/2.5 bar; Gr3- Al 2O 3(110μm)/2.5 bar; Gr4- SiO 2(30μm)/2.5 bar; Gr5- SiO 2(30μm)/2.5 bar; Gr6- Al 2O 3(50μm)/3.5 bar; Gr7- Al2O3(110μm)/3.5 bar; Gr8- SiO 2(30μm)/3.5 bar; Gr9- SiO 2(30μm)/3.5 bar. After treatments, surface roughness was analyzed by a digital optical profilometer and the morphology was examined by scanning electron microscopy (SEM). Data (μm) were subjected to statistical analysis by Dunnett's test (5%), two-way ANOVA and Tukey's test (5%). Results: The type of particle (p=0.0001) and the pressure (p=0.0001) used in the air abrasion protocols influenced the surface roughness values among the experimental groups (ANOVA). The mean surface roughness values (μm) obtained for the experimental groups (Gr2 to Gr9) were, respectively: 0.37 D; 0.56 BC; 0.46 BC; 0.48 CD; 0.59 BC; 0.82 A; 0.53B CD; 0.67 AB. The SEM analysis revealed that Al 2O 3, regardless of the particle size and pressure used, caused damage to the surface of the specimens, as it produced superficial damages on the ceramic, in the form of grooves and cracks. Conclusion: Al2O3 (110 μm/3.5 bar) air abrasion promoted the highest surface roughness on the ceramics, but it does not mean that this protocol promotes better ceramic-cement union compared to the other air abrasion protocols.

Effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading

This study evaluated the effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading. Disc-shaped zirconia specimens (Ø: 15mm, thickness: 1.2mm) (N=32) were submitted to one of the air-particle abrasion protocols (n=8 per group): (a) 50μm Al2O3 particles, (b) 110μm Al2O3 particles coated with silica (Rocatec Plus), (c) 30μm Al2O3 particles coated with silica (CoJet Sand) for 20s at 2.8bar pressure. Control group received no air-abrasion. All specimens were initially cyclic loaded (×20,000, 50N, 1Hz) in water at 37°C and then subjected to biaxial flexural strength testing where the conditioned surface was under tension. Zirconia surfaces were characterized and roughness was measured with 3D surface profilometer. Phase transformation from tetragonal to monoclinic was determined by Raman spectroscopy. The relative amount of transformed monoclinic zirconia (FM) and transformed zone depth (TZD) were measured using XRD. The data (MPa) were analyzed using ANOVA, Tukey's tests and Weibull modulus (m) were calculated for each group (95% CI). The biaxial flexural strength (MPa) of CoJet treated group (1266.3±158A) was not significantly different than that of Rocatec Plus group (1179±216.4A,B) but was significantly higher than the other groups (Control: 942.3±74.6C; 50μm Al2O3: 915.2±185.7B,C). Weibull modulus was higher for control (m=13.79) than those of other groups (m=4.95, m=5.64, m=9.13 for group a, b and c, respectively). Surface roughness (Ra) was the highest with 50μm Al2O3 (0.261μm) than those of other groups (0.15-0.195μm). After all air-abrasion protocols, FM increased (15.02%-19.25%) compared to control group (11.12%). TZD also showed increase after air-abrasion protocols (0.83-1.07μm) compared to control group (0.59μm). Air-abrasion protocols increased the roughness and monoclinic phase but in turn abrasion with 30μm Al2O3 particles coated with silica has increased the biaxial flexural strength of the tested zirconia. © 2013 Elsevier Ltd.

Air-particle abrasion on zirconia ceramic using different protocols: Effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography

This study evaluated the effect of different air-particle abrasion protocols on the biaxial flexural strength and structural stability of zirconia ceramics. Zirconia ceramic specimens (ISO 6872) (Lava, 3M ESPE) were obtained (N=336). The specimens (N=118, n=20 per group) were randomly assigned to one of the air-abrasion protocols: Gr1: Control (as-sintered); Gr2: 50 μm Al2O3 (2.5 bar); Gr3: 50 μm Al2O3 (3.5 bar); Gr4: 110 μm Al2O3(2.5 bar); Gr5: 110 μm Al2O3 (3.5 bar); Gr6: 30 μm SiO2 (2.5 bar) (CoJet); Gr7: 30 μm SiO2(3.5 bar); Gr8: 110 μm SiO2 (2.5 bar) (Rocatec Plus); and Gr9: 110 μm SiO2 (3.5 bar) (duration: 20 s, distance: 10 mm). While half of the specimens were tested immediately, the other half was subjected to cyclic loading in water (100,000 cycles; 50 N, 4 Hz, 37 °°C) prior to biaxial flexural strength test (ISO 6872). Phase transformation (t→m), relative amount of transformed monoclinic zirconia (FM), transformed zone depth (TZD) and surface roughness were measured. Particle type (p=0.2746), pressure (p=0.5084) and cyclic loading (p=0.1610) did not influence the flexural strength. Except for the air-abraded group with 110 μm Al2O3 at 3.5 bar, all air-abrasion protocols increased the biaxial flexural strength (MPa) (Controlnon-aged: 1030±153, Controlaged: 1138±138; Experimentalnon-aged: 1307±184-1554±124; Experimentalaged: 1308±118-1451±135) in both non-aged and aged conditions, respectively. Surface roughness (Ra) was the highest with 110 μm Al2O3(0.84 μm. FM values ranged from 0% to 27.21%, higher value for the Rocatec Plus (110 μm SiO2) and 110 μm Al2O3 groups at 3.5 bar pressure. TZD ranged between 0 and 1.43 μm, with the highest values for Rocatec Plus and 110 μm Al2O3 groups at 3.5 bar pressure. © 2013 Elsevier Ltd.

Comércio externo da China e efeitos sobre as exportações brasileiras

Incluye Bibliografía

O olhar dos alunos e dos professores sobre a informática no curso de licenciatura em matemática na UFPA

Este trabalho visa investigar os saberes manifestados pelos alunos do curso de Matemática na Universidade Federal do Pará (UFPA), em relação à utilização da informática em sua formação. Para atender esse objetivo, utilizamos uma metodologia referente ao estudo de caso. Fizemos um breve histórico sobre a informática educativa no Brasil, destacamos os avanços e pesquisas na área e abordamos as principais maneiras de utilizá-los na educação; tratamos dos aspectos relacionados à Educação Matemática com alguns softwares educativos e as experiências com o uso do computador; e, em seguida, passamos para a nossa investigação, fundamentada nos documentos escritos pelos alunos e professores do curso de Licenciatura em Matemática da UFPA. As informações foram obtidas por meio de questionários aplicados aos alunos, durante o segundo semestre letivo de 2004, e aos professores no primeiro semestre letivo de 2005. Pudemos observar, nas análises, que alunos e professores consideram muito importante a inserção da informática ao currículo da Licenciatura em Matemática, porém destacam que este ensino ainda não ocorre e há necessidade de que ele faça parte efetiva da formação dos professores de Matemática, pois, pode contribuir para a melhoria do processo de ensino aprendizagem e é uma ferramenta indispensável para a educação.

Characterization of calcium phosphate coating produced by biomimetic method

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Osteoblast differentiation is enhanced by a nano-to-micro hybrid titanium surface created by Yb:YAG laser irradiation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Juizado especial criminal no âmbito da justiça federal : uma experiência relativa ao procedimento dos crimes ambientais de menor potencial ofensivo

Inclui notas explicativas

Igreja de N. Sr.ª da Lapa dos Mercadores

Dentre as igrejas construídas na densa malha urbana da antiga capital, esta se destaca por possuir um adro fechado – galilé -, local defronte do qual havia em 1740 um oratório para N.Sra. da Lapa dos Mascates. A beleza desta igreja se deve a diversos fatores: a exata colocação da torre única neoclássica ao final da rua que a emoldura; a luz intensa que jorra sobre a ornamentação tornando-a mais ampla; a combinação dos elementos arquitetônicos em um pequeno espaço com os arcos plenos formando a galilé, acima, janelas coloniais e relevos na frontaria com pedra de lioz; triângulo frontão clássico; volutas barrocas com perfis de santos – Adriano, Bernardo nos nichos e Félix , João da Mata acima - e coruchéus à maneira de Gian Lorenzo Bernini (1598- 1680), colocados em 1869 por Antônio de Pádua. Internamente mais surpresas: o espaço elíptico amplia a graciosa cúpula que eleva o olhar até o pequeno lanternim. A profundidade da capela-mor cria um contraponto direcional até o retábulo com duplo coroamento enfatizado pela seqüência de fontes de luzes advindas das alturas dos lanternins e tribunas.

The life and writings of Jared Sparks, comprising selections from his journals and correspondence,

Mode of access: Internet.

Catalog /

Added title page in French.

Public libraries and popular education,

cover-title

Employés. Sarrasine. Gaudissart II. Facino cane.

Mode of access: Internet.