New hydrazine sensors based on electropolymerized meso-tetra (4-sulphonatephenyl)porphyrinate manganese (III)/silver nanomaterial

A new electrocatalytic active porphyrin nanocomposite material was obtained by electropolymerization of meso-tetra(4-sulphonatephenyl) porphyrinate manganese(III) complex (MnTPPS) in alkaline solutions containing sub-micromolar concentrations of silver chloride. The modified glassy carbon electrodes efficiently oxidize hydrazine at 10 mV versus Ag/AgCl, dramatically decreasing the overpotential of conventional carbon electrodes. The analytical characteristics of this amperometric sensor coupled with batch injection analysis (BIA) technique were explored. Wide linear dynamic range (2.5 x 10(-7) to 2.5 x 10(-4) mol L-1), good repeatability (R.S.D. = 0.84%, n = 30) and low detection (3.1 x 10(-8) mol L-1) and quantification (1.0 x 10(-7) mol L-1) limits, as well as very fast sampling frequency (60 determinations per hour) were achieved. (c) 2007 Elsevier B.V. All rights reserved.

Synthesis and characterization of a novel series of meso (nitrophenyl) and meso (carboxyphenyl) substituted porphyrins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Synthesis of self-assembled tubes in direct conjugated porphyrin-gold nanohybrid solution

We report on the formation of self-assembled meso-tetrakis (p-sulfonatofenyl) porphyrin (H2 TPP'S POT. 4-''IND. 4') tubes stabilized by gold nanoparticles (NPs) in basic solution and on their spectroscopic chareterization. The role of the gold NPs in the aggregation dynamics of free-base sulfonated porphyrin (H2TPP'S POT. 4-''IND. 4') is also investigated. The direct conjugation of the gold NPs to the H2TPPS4 molecule quenches the fluorescence intensity, while absorption peaks are blue-shifted, indicating predominant H-type aggregation. It is observed that porphyrin molecules adsorbed on the surface of the gold NP interact and form tubes of maximum diameter ∼1.5 μm and length >100 μm. Steady-state and time-resolved spectroscopic techniques confirm nonradiative energy transfer from porphyrin to gold NP.

Raman spectroscopic characteristics of phthalocyanine and naphthalocyanine in sandwich-type phthalocyaninato and porphyrinato rare earth complexes Part 5. – Raman spectroscopic characteristics of naphthalocyanine in mixed [tetrakis(4-tert-butylphenyl)porphyrinato]-(naphthalocyaninato) rare earth double-deckers

Raman spectra were recorded in the range 400–1800 cm−1 for a series of 15 mixed \[tetrakis(4-tert-butylphenyl)porphyrinato](2,3-naphthalocyaninato) rare earth double-deckers M(TBPP)(Nc) (M = Y; La–Lu except Pm) using laser excitation at 632.8 and 785 nm. Comparisons with bis(naphthalocyaninato) rare earth counterparts reveal that the vibrations of the metallonaphthalocyanine M(Nc) fragment dominate the Raman features of M(TBPP)(Nc). When excited with radiation of 632.8 nm, the most intense vibration appears at about 1595 cm−1, due to the naphthalene stretching. These complexes exhibit the marker Raman band for Nc•− as a medium-intense band in the range 1496–1507 cm−1, attributed to the coupling of pyrrole and aza stretching, while the marker Raman band of Nc2− in intermediate-valence Ce(TBPP)(Nc) appears as a strong band at 1493 cm−1 and is due to the isoindole stretchings. By contrast, when excited with radiation of 785 nm that is in close resonance with the main Q absorption band of the naphthalocyanine ligand, the ring radial vibrations at ca 680 and 735 cm−1 for MIII(TBPP)(Nc) are selectively intensified and are the most intense bands. For the cerium double-decker, the most intense vibration also acting as the marker Raman band of Nc2− appears at 1497 cm−1 with contributions from both pyrrole CC and aza CN stretches. The same vibrational modes show weak to medium intensity scattering at 1506–1509 cm−1 for MIII(TBPP)(Nc) and this is the marker Raman band of Nc•− when thus excited. The scatterings due to the Nc breathings, ring radial vibration, aza group stretchings, naphthalene stretchings, benzoisoindole stretchings and the coupling of pyrrole CC and aza CN stretchings in MIII(TBPP)(Nc) are all slightly blue shifted along with the decrease in rare earth ionic radius, confirming the effects of increased ring–ring interactions on the Raman characteristics of naphthalocyanine in the mixed ring double-deckers.

The central region of meso-3,4-diphenylhexane-2,5-dione

As with 1,2-diphenylethane (dpe), X-ray crystallographic methods measure the central bond in meso-3,4-diphenylhexane-2,5-done (dphd) as significantly shorter than normal for an sp(3)-sp(3) bond. The same methods measure the benzylic (ethane C-Ph) bonds in dphd as unusually long for sp(3)-sp(2) liaisons. Torsional motions of the phenyl rings about the C-Ph bonds have been proposed as the artifacts behind the result of a 'short' central bond in dpe. While a similar explanation can, presumably, hold for the even 'shorter' central bond in dphd, it cannot account for the 'long' C-Ph bonds. The phenyl groups, departing much from regular hexagonal shape, adopt highly skewed conformations with respect to the plane constituted by the four central atoms. It is thought that-the thermal motions of the phenyl rings, conditioned by the potential wells in which they are ensconced in the unit cell, are largely libratory around their normal axes. In what appears to be a straightforward explanation under the 'rigid-body' concept, it appears that these libratory motions of the phenyl rings, that account, at the same time, for the 'short' central bond, are the artifacts behind the 'long' measurement of the C-Ph bonds. These motions could be superimposed on torsional motions analogous to those proposed in the case of dpe. An inspection of the ORTEP diagram from the 298 K data on dphd clearly suggests these possibilities. Supportive evidence for these qualitative explanations from an analysis of the differences between the mean square displacements of C(1) and C(7)/C(1a) and C(7a) based on the 'rigid-body model' is discussed. (C) 2002 Elsevier Science B.V. All rights reserved.

Catálisis heterogenea en redes metaloporfírinicas: sistema MnII-TPPS (TPPS= meso-tetra(4-sulfonatofenil)-porfirina)

Comunicación: Póster presentado en el XXXV Congreso Bienal de la RSEQ (Real Sociedade Española de Química), celebrado en La Coruña, 19 - 23 de Julio de 2015

A dimeric tellurastannoxane carbonate cluster, tetra-tert-butyl-di-µ3-carbonato-tetrakis-[4-(N,N-dimethylamino)phenyl]di-µ-oxo-ditelluriumditin chloroform tetrasolvate

The title compound, [Sn₂Te₂(C₄H₉)₄(CO₃)₂O₂(C₈H₁₀N)₄]·4CHCl₃ or [(p-Me₂NC₆H₄)₂TeOSn^tBu₂CO₃]₂·4CHCl₃, contains an almost planar centrosymmetric inorganic Sn₂Te₂O₈C₂ core and hypercoordinated Sn and Te atoms. The structure features four secondary intramolecular Te...O contacts.

(5,10,15,20-Tetra(4-pyridil)porphinato)manganes(III) acetate modified by four mu(3)-oxo-triruthenium acetate clusters: synthesis, characterization, electrochemical behavior and catalytic activity

A novel supermolecule constituted by four mu(3)-oxo-triruthenium acetate clusters coordinated to manganese(III)-meso -tetra(4-pyridil)porphyrin acetate ([MnTPyP]CH3COO) has been synthesized. Characterization has been performed by UV-Vis and H-1 NMR spectroscopy. The electrochemical behavior (cyclic voltammetry and spectroelectrochemistry) in N,N'-dimethylformamide has been analyzed in terms of five redox processes: three related to peripheral clusters (Ru-IV,Ru-III,Ru-III/Ru-III,Ru-III,Ru-III/Ru-III,Ru-II,Ru-II) and two centered on the Mn-porphyrin core ((MnP)-P-III/(MnP)-P-II/(MnP2-)-P-II). A direct comparison has been performed between MnTCP and MnTPyP as catalysts for the cyclooctene and cyclohexane oxidation reactions. The improved selectivity exhibited by the supramolecular catalyst for cyclohexane oxidation has been ascribed to electronic effects on the oxomanganese(V) porphyrin species induced by the four peripheral clusters, in the formal (RuRuRuIII)-Ru-IV-Ru-III oxidation state. (C) 2000 Elsevier B.V. S.A. All rights reserved.

Auto-ensamblaje de unidades porfirínicas para la obtención de dispositivos supramoleculares

40 p. : il.

Binding of metal ions with protein studied by a combined technique of microdialysis with liquid chromatography

A method has been developed for the determination of interactions of metal ions and protein by using microdialysis sampling technique combined with pre-column derivation and reversed-phase ion-pair liquid chromatographic (HPLC analysis. Cu(II), Zn(II) and human serum albumin (HSA) were chosen as model metal ions and protein, respectively. The mixed solutions of metal ions and HSA with different molar ratios buffered with 0.1 M Tris-HCl containing 0.1 M NaCl at pH 7.43 were sampled with a mirodialysis probe by keeping perfusion rate at 1 mul/min and the temperature at 37 degreesC. The free concentrations of metal ions in microdialysates were assayed by precolumn derivatization with meso-tetra(4-sulfophenyl)-porphyrin (TPPS4) followed ion-pair HPLC analysis. The recovery (R) of microdialysis sampling was measured in vitro under similar conditions as 65.74% for Cu(II), 70.45% for Zn(II) with R.S.D. below 3.2%. The primary binding constants and number of binding site estimated by the Scatchard plot analysis are 5.04 x 10(6) M-1 and 0.85 for Cu(II), and 9.87 x 10(6) M-1 and 1.10 for Zn(II), respectively. The competition of Cu(II) and Zn(II) at the second binding site on HSA was investigated, and it was observed that there is a second site on HSA to bind Cu(II) and Zn(II), the affinity of Cu(II) is stronger than that of Zn(II) to this second site of HSA. (C) 2001 Elsevier Science B.V. All rights reserved.

Electrocatalytic reduction of dioxygen at chemically modified electrodes

The kinetics of the reduction of O₂ by Ru(NH₃)₆⁺² as catalyzed by cobalt(II) tetrakis(4-N-methylpyridyl)porphyrin are described both in homogeneous solution and when the reactants are confined to Nafion coatings on graphite electrodes. The catalytic mechanism is determined and the factors that can control the total reduction currents at Nafion-coated electrodes are specified. A kinetic zone diagram for analyzing the behavior of catalyst-mediator-substrate systems at polymer coated electrodes is presented and utilized in identifying the current-limiting processes. Good agreement is demonstrated between calculated and measured reduction currents at rotating disk electrodes. The experimental conditions that will yield the optimum performance of coated electrodes are discussed, and a relationship is derived for the optimal coating thickness.

The relation between the reduction potentials of adsorbed and unadsorbed cobalt(III) tetrakis(4-N-methylpyridyl)porphyrin and those where it catalyzes the electroreduction of dioxygen is described. There is an unusually large change in the formal potential of the Co(III) couple upon the adsorption of the porphyrin on the graphite electrode surface. The mechanism in which the (inevitably) adsorbed porphyrin catalyzes the reduction of O₂ is in accord with a general mechanistic scheme proposed for most monomeric cobalt porphyrins.

Four new dimeric metalloporphyrins (prepared in the laboratory of Professor C. K. Chang) have the two porphyrin rings linked by an anthracene bridge attached to meso positions. The electrocatalytic behavior of the diporphyrins towards the reduction of O₂ at graphite electrodes has been examined for the following combination of metal centers: Co-Cu, Co-Fe, Fe-Fe, Fe-H₂. The Co-Cu diporphyrin catalyzes the reduction of O₂ to H₂O₂ but no further. The other three catalysts all exhibit mixed reduction pathways leading to both H₂O₂ and H₂O. However, the pathways that lead to H₂O do not involve H₂O₂ as an intermediate. A possible mechanistic scheme is offered to account for the observed behavior.

Síntese e potenciais aplicações de novas porfirinas β-funcionalizadas

Neste trabalho é descrita a síntese de novos derivados porfirínicos com potencial aplicação em terapia fotodinâmica (PDT) e como quimiossensores para o reconhecimento molecular de catiões metálicos. Os novos compostos foram preparados usando como “template” 2-formil-5,10,15,20-tetrafenilporfirina através de diferentes abordagens sintéticas, tais como, reações de cicloadição 1,3-dipolar ou reações do tipo condensação aldólica. Depois de uma breve introdução sobre porfirinas segue-se no capítulo 2 a descrição dos estudos de formilação de Vilsmeier-Haack dos complexos de Ni(II) e Cu(II) de meso-tetra-arilporfirinas realizados usando irradiação de microondas. Utilizando os complexos de Ni(II) e Cu(II) da 5,10,15,20-tetrafenilporfirina foram considerados vários solventes, potências de irradiação e tempos de reação; as melhores condições encontradas foram aplicadas a outras mesotetra- arilporfirinas. Os derivados formilados resultantes da reação de formilação de Vilsmeier-Haack com irradiação de micro-ondas foram isolados em bons rendimentos e com significativa redução no tempo de reação, que passou de horas, em condiçoes clássicas de aquecimento, para minutos sob irradiação de micro-ondas. O “scale-up” da reação, nas condições estabelecidas, mostrou ser eficiente não sendo a reação afetada pelo aumento da quantidade de porfirina. O capítulo 3 descreve a reação de ciclo-adição 1,3-dipolar de meso-tetraarilporfirinas com iminas de nitrilo, geradas in situ por desidrobromação de hidrazono-α-bromoglioxilatos de etilo na presença de base. A reação de iminas de nitrilo com 5,10,15,20-tetraquis(pentafluorofenil)porfirina, na presença de K2CO3 em tolueno a refluxo, permitiu isolar novas pirazoloclorinas em rendimentos moderados. Foram investigadas as propriedades fotofísicas das novas clorinas e os resultados sugerem que duas delas apresentam potencialidades para serem utilizadas em PDT. Este tipo de reações foi estendida ao complexo 2-vinil-5,10,15,20- tetrafenilporfirinatozinco(II); este complexo reagiu com as iminas de nitrilo obtendo-se os correspondentes derivados porfirina-pirazolina em rendimentos que variaram entre valores de bom e de excelente. A regioquímica dos derivados porfirina-pirazolina formados foi elucidada por RMN e confirmada por difração de raios-X. O tratamento dos derivados porfirina-pirazolina com DDQ proporciona os correspondentes derivados porfirina-pirazol com rendimentos de moderados a excelentes. Quando os derivados porfirina-pirazolina foram submetidos a condições de hidrólise básica, observou-se não só a hidrólise do grupo éster presente no anel pirazolínico mas também a concomitante oxidação desta unidade heterocíclica, isolando-se assim, num único passo reacional, novos derivados de tipo porfirinapirazol com um grupo carboxílico. A descomplexação dos complexos de Zn(II) foi realizada na presença de TFA, tendo-se isolado quantitativamente os respetivos derivados na forma de bases livres.Foram estudadas algumas das propriedades fotofísicas de todos os compostos obtidos, quer na forma de complexos de Zn(II), quer na forma de base livre. Duma forma geral, todos os compostos preparados mostraram ser bons geradores de oxigénio singleto, o que os torna interessantes para possível utilização como fotossensibilizadores em PDT. No capítulo 4 é descrita a reação de 2-formil-5,10,15,20-tetrafenilporfirina com aril-cetonas e acetato de amónio, na presença de La(OTf)3, o que permitiu isolar novas benzoporfirinas e 2-(2,6-diarilpiridina-4-il)porfirinas. Esta metodologia foi utilizada para preparar, pela primeira vez, uma 2-(2,2':6,2''- terpiridin-4-il)porfirina. As estruturas de duas das 2-(2,6-diarilpiridin-4- il)porfirinas foram confirmadas por difração de raios-X de cristal único. A metodologia descrita permite ainda preparar novos derivados de tipo porfirinacalcona, apenas com pequenos ajustes nas condições reacionais através de uma reação do tipo condensação aldólica. Os derivados do tipo porfirinacalcona foram posteriormente usados para preparar derivados do tipo porfirinapirazol 1,3,5-tri-substituídos em bons rendimentos, através de reação de condensação com fenil-hidrazina. Em cada um dos capítulos é descrito os procedimentos experimentais e a caracterização espectroscópica (RMN, UV-vis e massa) dos novos compostos isolados. Em alguns casos foi necessário o recurso a técnicas de RMN bidimensionais como COSY, NOESY, HSQC e HMBC. Os compostos preparados neste trabalho foram ainda objecto de estudos de avaliação das respetivas potencialidades para actuarem como quimiossensores para o reconhecimento de catiões metálicos, nomeadamente, Cu(II), Ag(I), Zn(II), Cd(II) e Hg(II). Assim no capítulo 5 é descrita a caracterização fotofísica dos compostos preparados no capítulo 4 e, os estudos destes como potenciais quimiossensores. Os estudos para verificar a potencialidade dos compostos como quimiossensores foram efectuados: i) em solução, através de titulações espectrofotométricas e espectrofluorimétricas, ii) no estado sólido, recorrendo à preparação de filmes de PMMA dopados com os ligandos porfirínicos em estudo e, iii) na fase gasosa, seguindo as titulações dos ligandos com metais por espectrometria de massa (MALDI-TOF-MS). Os compostos estudados mostraram ter capacidade para atuarem como quimiossensores de catiões metálicos capazes de distinguirem entre os iões Zn(II) e Hg(II).

On an Electrode Modified by a Supramolecular Ruthenium Mixed Valence (Ru(II)/Ru(III)) Diphosphine-Porphyrin Assembly

Three novel polymetallic ruthenium (III) meso-tetra(4-pyridyl)porphyrins containing peripheral ""RuCl(3)(dppb)"" moieties have been prepared and characterized. The X-ray structure of the tetraruthenated {NiTPyP[RuCl(3)(dppb)](4)} porphyrin complex crystallizes in the triclinic space group FT. This structure is discussed and compared with the crystal data for the mer-[RuCl(3)(dppb)(py)]. The {TPyP[RuCl(3)(dppb)](4)} and {CoTPyP[RuCl(3)(dppb)](4)} porphyrins were used to obtain electrogenerated films on ITO and glass carbon electrode surfaces, respectively. Such tetraruthenated porphyrins form films of a mixed-valence species {TPyP[Ru(dppb)](4)(mu Cl(3))(2)}(2)(4n2+) and {CoTPyP[Ru(dppb)](4)(mu Cl(3))(2)}(2n)(4n2+) on the electrode surface. The modified electrode with {CoTPyP[RuCl(3)(dppb)](4)} is very stable and can be used to detect organic substrates such as catechol.

Vanadium oxide-porphyrin nanocomposites as gas sensor interfaces for probing low water content in ethanol

Vanadium pentoxide xerogels (VXG) incorporating meso(3- and 4-pyridyl)porphyrin cobalt(III) species coordinated to four [Ru(bipy)(2)Cl](+) complexes were employed as gas sensing materials capable of detecting small amounts of water in commercial ethanol and fuel supplies. According to their X-ray diffraction data, the original VXG lamellar framework was maintained in the nanocomposite material, but the interlamellar distance increased from 11.7 to 15.2 angstrom, reflecting the intercalation of the porphyrin species into the vanadium pentoxide matrix. The films generated by direct deposition of the nanocomposite aqueous suspensions exhibited good electrical and electrochemical performance for application in resistive sensors. The analysis of water in ethanol and fuels was carried out successfully using an especially designed electric setup incorporating a laminar gas flow chamber and interdigitated gold electrodes coated with the nanocomposites. (C) 2010 Elsevier B.V. All rights reserved.