The effects of some variables on CO2 laser-MAG hybrid welding

The CO2-laser-MAG hybrid welding process has been shown to be a productive choice for the welding industry, being used in e.g. the shipbuilding, pipe and beam manufacturing, and automotive industries. It provides an opportunity to increase the productivity of welding of joints containing air gaps compared with autogenous laser beam welding, with associated reductions in distortion and marked increases in welding speeds and penetration in comparison with both arc and autogenous laser welding. The literature study indicated that the phenomena of laser hybrid welding are mostly being studied using bead-on-plate welding or zero air gap configurations. This study shows it very clearly that the CO2 laser-MAG hybrid welding process is completely different, when there is a groove with an air gap. As in case of industrial use it is excepted that welding is performed for non-zero grooves, this study is of great importance for industrial applications. The results of this study indicate that by using a 6 kW CO2 laser-MAG hybrid welding process, the welding speed may also be increased if an air gap is present in the joint. Experimental trials indicated that the welding speed may be increased by 30-82% when compared with bead-on-plate welding, or welding of a joint with no air gap i.e. a joint prepared as optimum for autogenous laser welding. This study demonstrates very clearly, that the separation of the different processes, as well as the relative configurations of the processes (arc leading or trailing) affect welding performance significantly. These matters influence the droplet size and therefore the metal transfer mode, which in turn determined the resulting weld quality and the ability to bridge air gaps. Welding in bead-onplate mode, or of an I butt joint containing no air gap joint is facilitated by using a leading torch. This is due to the preheating effect of the arc, which increases the absorptivity of the work piece to the laser beam, enabling greater penetration and the use of higher welding speeds. With an air gap present, air gap bridging is more effectively achieved by using a trailing torch because of the lower arc power needed, the wider arc, and the movement of droplets predominantly towards the joint edges. The experiments showed, that the mode of metal transfer has a marked effect on gap bridgeability. Transfer of a single droplet per arc pulse may not be desirable if an air gap is present, because most of the droplets are directed towards the middle of the joint where no base material is present. In such cases, undercut is observed. Pulsed globular and rotational metal transfer modes enable molten metal to also be transferred to the joint edges, and are therefore superior metal transfer modes when bridging air gaps. It was also found very obvious, that process separation is an important factor in gap bridgeability. If process separation is too large, the resulting weld often exhibits sagging, or no weld may be formed at all as a result of the reduced interaction between the component processes. In contrast, if the processes are too close to one another, the processing region contains excess molten metal that may create difficulties for the keyhole to remain open. When the distance is optimised - i.e. a separation of 0-4 mm in this study, depending on the welding speed and beam-arc configuration - the processes act together, creating beneficial synergistic effects. The optimum process separation when using a trailing torch was found to be shorter (0-2 mm) than when a leading torch is used (2-4 mm); a result of the facilitation of weld pool motion when the latter configuration is adopted. This study demonstrates, that the MAG process used has a strong effect on the CO2-laser-MAG hybrid welding process. The laser beam welding component is relatively stable and easy to manage, with only two principal processing parameters (power and welding speed) needing to be adjusted. In contrast, the MAG process has a large number of processing parameters to optimise, all of which play an important role in the interaction between the laser beam and the arc. The parameters used for traditional MAG welding are often not optimal in achieving the most appropriate mode of metal transfer, and weld quality in laser hybrid welding, and must be optimised if the full range of benefits provided by hybrid welding are to be realised.

Hitsauslankojen kallistuskulmien vaikutus hitsausliitoksen ominaisuuksiin S355-rakenneteräksen tandem-MAG-pienahitsauksessa

Tämä kandidaatintyö on tutkimus hitsauslankojen kallistuskulmien vaikutuksesta hitsausliitoksen ominaisuuksiin tandem-MAG-pienahitsauksessa S355-rakenneteräkselle. Kokeellinen osuus suoritettiin Lappeenrannan teknillisen yliopiston hitsaustekniikan laboratoriossa jatkotutkimuksena Binbin Yanin diplomityölle ”Influence of wire configurations of welding S355 structural steel with tandem GMAW”. Tutkimuksen tavoitteena on määrittää tandem-MAG-hitsauksessa käytettyjen hitsauslankojen kallistuskulmien vaikutus hitsausliitoksen ominaisuuksiin. Teoriaosuuden tavoitteena on selvittää myös muiden hitsausparametrien vaikutus hitsausliitoksen ominaisuuksiin sekä perehtyä hitsisulan käyttäytymiseen terästen tandem-MAG-hitsauksessa.

Tandem-MAG-welding of high strength steels for shipbuilding applications

Tämän työn tavoitteena oli hitsata tandem MAG –laitteistolla 25 mm paksua Ruukin E500 TMCP terästä. Työssä oli tarkoituksena vähentää railotilavuutta mahdollisimman paljon sekä suorittaa testihitsaukset 0.8 kJ/mm sekä 2.5 kJ/mm lämmöntuonneilla. Teoriaosuudessa käsiteltiin Tandem MAG-hitsaukseen, sen tuottavuuteen ja laatukysymyksiin liittyviä asioita sekä siinä perehdyttiin suurlujuusteräksien käyttöön hitsauksessa sekä laivanrakennuksessa. Kokeellisessa osuudessa perehdyttiin hitsauksessa huomattuihin etuihin, ongelmiin sekä ongelmien ratkaisumahdollisuuksiin. Hitsausliitoksen mekaaniset ominaisuudet tutkittiin rikkomattomin sekä rikkovin menetelmin. Alustavat hitsausohjeet luotiin kummallekin lämmöntuonnille. Testaukset aloitettiin 30 º railokulmalla pienentäen kulmaa mahdollisuuksien mukaan. Testauksissa ei saatu hitsattua onnistuneesti alle 30 º railokulmalla. Hitsaustestien aikana huomattiin magneettisen puhalluksen vaikutus hitsaustapahtumaan. Kaasunvirtausnopeuden tuli olla tietyn suuruinen jotta palkokerrokset onnistuivat ilman huokoisuusongelmaa. Pienemmällä lämmöntuonnilla hitsattaessa kaasunvirtausnopeudet olivat tärkeämpiä hitsatessa ylempiä palkokerroksia. Kääntämällä hitsauspoltinta sivuttaissuunnassa 7-10 astetta auttoi ehkäisemään reunahaavan syntymistä. Rikkovista menetelmistä testitulokset olivat hyväksyttyjä kaikkien muiden paitsi päittäishitsin sivutaivutuskokeen osalta.

Modifioidun MAG-kaarihitsausprosessin hyödyntäminen railotilavuuden pienentämisessä mekanisoidussa orbitaalihitsauksessa.

Länsimaisen työn hinta luo jatkuvan paineen hitsauksen tuottavuuden parantamiseen. MIG/MAG-hitsauksen tuottavuutta voidaan parantaa tehostamalla hitsausprosessia, vähentämällä hitsien lukumäärää ja pienentämällä hitsiaineen tarvetta. Eri virtalähdevalmistajat tuovat markkinoille hitsausprosesseja hitsauksen tehostamiseen, joilla pystytään korvata vähemmän tuottavia hitsaustyövaiheita. Hitsien lukumäärän vähentäminen on rakenteen suunnitteluun liittyvä tekijä ja hitsiaineen tarpeen pienentäminen voidaan toteuttaa railogeometrian muutoksilla tai tuotteen sopivalla suunnittelulla. Diplomityössä on tutkittu 30 mm paksujen S355 rakenneteräsputkien hitsauksen tuottavuuden kasvattamista käyttäen nykyaikaisia modifioituja kaarihitsausprosesseja ja railotilavuutta pienentämällä. Työssä vertailtiin 30o ja 60o railokulmalla tehtyjä liitoksia. Railogeometrian muutoksen lisäksi diplomityössä vertailtiin eri menetelmien tehokkuutta putken pohjapalon hitsauksessa.

Controlling full penetration in MAG welding by the application of infrared thermography and neural network

In this study, an infrared thermography based sensor was studied with regard to usability and the accuracy of sensor data as a weld penetration signal in gas metal arc welding. The object of the study was to evaluate a specific sensor type which measures thermography from solidified weld surface. The purpose of the study was to provide expert data for developing a sensor system in adaptive metal active gas (MAG) welding. Welding experiments with considered process variables and recorded thermal profiles were saved to a database for further analysis. To perform the analysis within a reasonable amount of experiments, the process parameter variables were gradually altered by at least 10 %. Later, the effects of process variables on weld penetration and thermography itself were considered. SFS-EN ISO 5817 standard (2014) was applied for classifying the quality of the experiments. As a final step, a neural network was taught based on the experiments. The experiments show that the studied thermography sensor and the neural network can be used for controlling full penetration though they have minor limitations, which are presented in results and discussion. The results are consistent with previous studies and experiments found in the literature.

Estudo da viabilidade operacional do processo de soldagem MAG com alimentação adicional de arame frio

Este trabalho apresenta um estudo experimental da viabilidade operacional, econômica, geométrica e da qualidade da solda com o uso do processo intitulado MAG-CW (Metal Active Gas–Cold Wire); entendido como: processo de soldagem MAG com adição de arame frio ou não energizado. Neste contexto, para o desenvolvimento deste trabalho utilizou-se os processos de soldagem MAG e o MAG-CW, sendo utilizados arames consumíveis sólidos de 1,2 mm de diâmetro, da classe AWS E-70S6 e o dióxido de carbono puro, CO², como gás de proteção com vazão de 17 l/min, para os dois processos empregados. A soldagem automatizada foi realizada com o auxílio de uma fonte eletrônica ajustada em CC⁺, no modo tensão constante e interfaceada a um microcomputador. Para ambos os processos, os cordões de solda foram depositados sobre corpos de prova de aço carbono SAE 1020 medindo 76x155x12,7 mm, com passes em simples deposição, na posição plana puxando e empurrando o arco voltaico. Para o processo MAG-CW adicionouse o arame frio, na região do arco elétrico, por um sistema de alimentação auxiliar de arame de forma seqüencial Tandem e Twin, também, na posição plana. As variáveis de influência foram a Velocidade de Alimentação do Arame-Eletrodo, VAE, que variou em três níveis: 6, 7,5 e 9 m/min, respectivamente, a Velocidade de Alimentação de Arame Frio, VAF, que também variou em três níveis, sendo: 3, 4 e 5 m/min combinadas com VAE. As variáveis de resposta para a avaliação experimental foram a estabilidade do arco elétrico, as características econômicas, as características geométricas e a qualidade superficial do cordão de solda. Os resultados mostraram satisfatória estabilidade do arco, bem como, elevada produção em relação ao processo MAG e bom aspecto superficial das soldas. Neste sentido, o processo MAG-CW, quando comparado ao processo MAG, foi superior na taxa de fusão (TF) em 57% para a VAE igual a 6 m/min, 59 % para VAE igual a 7,5 m/min e de 53 % para a VAE igual a 9 m/min. Observou-se, ainda, que o mesmo ocorreu para a taxa de deposição (TD) aumentando em todos os níveis de velocidade: 62% para a VAE na condição igual a 6 m/min e 7,5 m/min e de 57 % para a VAE na condição igual a 9 m/min. A boa performance no aumento das taxas obtidas pelo processo MAG-CW demonstra vantagem, com maior evidência no desempenho destas características, em função da adição de arame frio ao arco.

Evaluation of the usability and benefits of twist wire GMAW and FACW narrow gap welding /

"March 1988."

Operator, organizational, field, and depot maintenance manual : welding set, ARC, inert gas shielded, plastic or metal lined gun, for 3/64 in. wire, DC, 115V, (Linde model SWM-9-A) FSN 3431-972-7672.

Includes index.

Organizational maintenance repair parts and special tools lists : welding set, ARC, inert gas shielded, plastic or metal lined gun; for 3/64 in. wire; DC, 115V., (Linde model SWM-9-A) FSN 3431-972-7672.

"May 1970."

Organizational, DS, GS and depot maintenance repair parts and special tools list : welding set, ARC, inert gas shielded, air cooled, metal lined gun for 3/64 in. wire, (Westinghouse model SA-136), FSN 3431-121-5878.

"July 1971."

Operator, organizational, field, and depot maintenance manual : welding set, arc, inert gas shielded, plastic or metal lined gun, for 3/64 in. wire, DC, 115V (Westinghouse model SA-135), FSN 3431-879-9709.

"August 1962."

Operator's, organizational, DS, and GS maintenance manual : welding set, arc, inert gas shielded, air cooled, metal lined gun for 3/64 in. wire (Westinghouse model SA-136), FSN 3431-121-5878.

"August 1969."

Organizational maintenance repair parts and special tools list : welding set, arc, inert gas shielded, plastic or metal lined gun, for 3/64 in. wire, DC, 115V (Westinghouse model SA-135), FSN 3431-879-9709.

Includes index.

Operator, organizational, direct and general support, and depot maintenance manual (including repair parts) : welding machine, arc, inert shielded, transformer, 300 amp, 10 to 400 amp AC straight polarity, 10 to 00 amp DC reverse polarity (Midstates model MAG 00 AC/DC T 14) FSN 3431-862-6670.

"February 1967."

Direct and general support and depot maintenance repair parts and special tools lists : welding set, arc, inert gas shielded, plastic or metal lined gun; for 3/64 in. wire; DC, 115V., (Linde model SWM-9-A), FSN 3431-972-7672.

"May 1970."