Eutrofização do reservatório Engenheiro Armando Ribeiro Gonçalves, no Rio Grande do Norte: implicações para o abastecimento público e para a piscicultura intensiva em tanques-rede

This study aimed to describe the spatial and temporal patterns of variation in trophic state and its relation with the structure and dynamics of planktonic community of a large reservoir located in semi-arid tropical region of Northeast Brazil. The reservoir Armando Ribeiro Gonçalves is the biggest reservoir of the Rio Grande do Norte State and is responsible for about 53% of all surface water accumulated in the State. The samples of water and plankton were taken monthly in 10 points distributed throughout the longitudinal axis of the reservoir and over a full hydrological cycle. The samples were collected to determine concentrations of total phosphorus, total nitrogen, chlorophyll a and suspended solids (fixed and volatile) and for determining the composition and abundance of phytoplanktonic and zooplanktonic species. During the study period, the reservoir was characterized as eutrophic and there was no trend of increasing the trophic state of the reservoir in the period of drought. The concentrations of total phosphorus and suspended fixed solids decreased towards the dam while the N:P ratios increased in the same direction due to the reduction in the phosphorus concentrations and relative constancy in the nitrogen concentrations. The N:P ratios observed were indicative of greater limitation by phosphorus than by nitrogen. However, as concentrations of both nutrients were high and the water transparency was very low, with secchi depth usually lower than one meter, it seems likely that the planktonic primary production of the reservoir is more limited by the availability of light than the availability of nutrients. High nutrient concentrations coupled with low availability of light may explain the continuing dominance of filamentous cyanobacteria such as Cylindrospermopsis raciborskii in the plankton of the reservoir.These cyanobacteria are potentially toxic and pose a serious environmental problem because it compromises the water quality for public supply, recreation and fishing when present in high densities as in this study. The mesozooplankton of the reservoir was dominated by the calanoid Notodiaptomus cearensis and the cladoceran Diaphanosoma spinulosum. In general, the structure of zooplankton community seems to be particularly influenced by the spatial variation of cyanobacteria. The results of the regression analyses show that both the chlorophyll a concentrations and the cyanobacteria biovolume were more strongly correlated with the nitrogen than with phosphorus and that the water transparency was more strongly correlated with algal biomass than with other sources of turbidity. The maximum load of phosphorus to attain the maximum permissible concentration of total P in the reservoir was estimated in 63.2 tonnes P/ year. The current external P load to the reservoir is estimated in 324 tonnes P / year and must be severely reduced to improve the water quality for water supply and allow the implementation of aquaculture projects that could contribute to the socio-economic development of the region

Estudo de um secador solar fabricado apartir de sucata de tambor de polietileno

The scarcity of farmland, reducing the supply of irrigation water and lack of technologies for conservation, makes the globalized world facing serious difficulties in the production of food for its population. The most viable outlet for this dilemma is the dissemination of technologies, economically viable and available to the whole population, for dehydration of perishable foods produced. This paper presents a solar dryer of direct exposure to the production of dried fruit, made from recycled polyethylene drum of 200 liters, used for storing water or trash. The drum was sectioned in half in its longitudinal axis and has its halves together forming a trough-like structure. It describes the processes of construction and assembly of solar dryer proposed, whose main characteristic its low cost, and was designed for use by people with low income, for processing fruits widely available in our region (mango, banana, guava, cashew, pineapple, tomato and others) in dried fruit and flour, contributing significantly to increase the life of these foods. The nuts and flours can be used for own consumption and for marketing jobs and income generation. Tests were conducted to diagnose the feasibility of using solar dryer for the various types of tropical fruits. Were also compared parameters such as drying times and thermal efficiency obtained with the prototype found in the specialized literature in food dehydration. The drying times in the dryer were obtained competitive with those obtained in other models of dryers LMHES developed

Morphological studies on the heart ventricle of African catfish (Clarias gariepinus)

The histological and ultrastructural characteristics of the heart ventricle in Clarias gariepinus (African catfish) has been studied by light microscopy and transmission electron microscopy. The ventricle of the heart has a saccular shape and the myocardial wall consists of an outer thin compact myocardium and an inner well-developed spongy myocardium. The myocardial layer has small myocytes, interstitial spaces and blood vessels. The myocytes are the major constituents of the ventricular wall. They are long cells, with large nuclei, and predominantly euchromatin. The sarcoplasmic reticulum of the ventricular myocytes consists of a network of tubules and subsarcolemmal cisternae oriented mainly along the longitudinal axis of the myofibrils. In contrast to the ventricular structure of other fish species described in the literature (Greer-Walker et al., 1985 Santer, 1985 Sanchez-Quintana et al., 1995, 1996), the African catfish, a freshwater sedentary fish recently introduced in neotropical climatic environments, showed a saccular ventricle that consisted of two muscle layers, a thin compact layer with large vessels and a developed spongy layer. The ultrastructure of the ventricular myocardium of C.gariepinus is similar to that of other teleosts, inclusive that of fish with other swimming habits.

Burrowing behavior of Dermatonotus muelleri (Anura, Microhylidae) with reference to the origin of the burrowing behavior of Anura

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A NEW SPECIES of THE BOKERMANNOHYLA MARTINSI GROUP FROM CENTRAL BAHIA, BRAZIL WITH COMMENTS on BOKERMANNOHYLA (ANURA: HYLIDAE)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Experimental aspects of partially premixed pulsating combustion

The pulsating combustion process has won interest in current research due to indications that its application in energy generation can offer several advantages, such as: fuel economy, reduced pollutants formation, increased rate of convective heat transfer and reduced investment, when compared with conventional techniques. An experimental study has been conducted with the objective of investigating the effects of combustion driven acoustic oscillations in the emission rates of combustion gases, especially carbon monoxide and nitrogen oxides. The experiments were conducted in a water-jacketed 1-m long by 25-cm internal diameter stainless steel vertical tube. The combustor operated with liquefied petroleum gas (LPG) in both oscillatory and non oscillatory conditions, under the same input conditions. Part of the reactant mixture was excited acoustically, before the burner exit, by a speaker positioned strategically. The burner was aligned with the chamber longitudinal axis and positioned at its bottom. The experiments were conducted for 0.16 g/s of LPG burning in stoichiometric equivalence ratio. The main conclusions were: a) the pulsating combustion process produces more uniform fuel/air profile than the non pulsating process, b) close to stoichiometric equivalence ratio the pulsating combustion process generates higher rates of NO x; c) the frequency has a strong influence in NO x emission, but the pressure amplitude has a weak influence; d) the presence of the acoustic field may change drastically the combustion gas emissions in diffusion flames, but in pre-mixed flames the influence is not as strong.

Distribuição da evaporação no interior de um ambiente protegido

This work aimed to study evaporation distribution in a protected environment. The experiment was set up in polyethylene greenhouse at the Lageado Experimental Farm in the School of Agronomic Sciences (FCA, UNESP-Botucatu) in the winter of 2005. 132 500-ml plastic micro evaporimeters (13.7 diameter) were used used to obtain evaporation values and analyze spatial energy distribution. These micro evaporimeters were distributed in 44 equidistant points, at three different heights from the soil surface: 0.40, 0.80 and 1.20cm The tunnel-type greenhouse was 7.5 m wide, 27.5 m long and 3.20 m high at the center, and was covered with black shadow screen (sombrite) on the sides. Southeast/northwest orientation, based on true north, was used foro othe greenhouse longitudinal axis. For variable comparison, a geostatistics was used through the □GS+ program. From obtained data, it was concluded that: there was spatial variability at different points and heights of the microevaporation values obtained from micro evaporimeters were not greenhouse; the Class A Pan installed outside the greenhouse can be used to evaluate the internal evaporation.

Distribuição da energia no interior de uma estufa plástica no período inverno

This work aimed to study the energy distribution in protected environment during the winter of 2005. A plastic tunnel (27.5 m long, 7.5 m wide, 3.2 m high in the center and 2.00 m high in both lateral sides) was covered with polyethylene 100 micra and black shadow screen (sombrite) in lateral sides at the FCA/UNESP, Botucatu - SP. 142 minievaporimeters (500 ml volume and 147 cm2 area) were evenly distributed and set up at three heights: 0.40 m; 0.80 m and 1.20 m from soil surface in order to analyze energy distribution along the studied area. The greenhouse longitudinal axis was northwest/southeast, based on true north. Geosatistics principles and the GS+ Program were adopted to compare variables. From obtained results, it was concluded that there were significant evaporation variations at different points anf heights; the highest values were the ones closest to the soil surface (0.40m) in July and at highest heights (0.80 and 1.20m). Highest evaporations occurred in the southeastern side of the greenhouse.

The influence of the flame structure on the combustion oscillations in a cylindrical chamber

An experimental study has been conducted with the objective of investigating the effects of the flame structure in the combustion oscillation conditions into a laboratorial scale cylindrical chamber. The experiments were conducted in a water-jacketed 1-m long by 25-cm internal diameter stainless steel vertical tube. The combustor operated with liquefied petroleum gas (LPG) in both oscillatory and non oscillatory conditions, under the same input conditions. Part of the reactant mixture was excited acoustically, before the burner exit, by a speaker positioned strategically. The burner was aligned with the chamber longitudinal axis and positioned at its bottom. The experiments were conducted for 0.16 g/s of LPG burning in stoichiometric equivalence ratio. To analyze the flame structure the image tomographic reconstruction process were used, and the resultant images were associated to the oscillatory conditions (frequency and amplitude) into the combustion chamber. The main conclusions were: 1) when the flame premixed condition increase, for example 60% of the total air flow rate is premixed with LPG, the region of intense energy released is close to burner exit and strong amplitudes of oscillation (close to 50 mbar) were obtained into the chamber; 2) for long flames, predominantly diffusive flames, just weak amplitudes were detected, in the spite of the speaker exiting the premixed flow; 3) when the energy is released distributed through the combustion chamber, the long flame acts like a baffle. Copyright © 2006 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.

Localização sub-celular de proteínas marcadas com GFP em Xanthomonas axonopodis pv. citri por microscopia de fluorescência

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Determinação teórico-experimental da rigidez ao cisalhamento devido à restrição das telhas conectadas nas terças

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo experimental de um reator de gaseificação em um leito fixo de açaí

Um leito de gaseificação de pequena escala foi projetado, construído e operado com o objetivo de investigar os parâmetros que influenciam o processo de gaseificação de um leito fixo de caroço de açaí. O reator é do tipo topo aberto downdraft estratificado, de dimensões de 15 cm de diâmetro interno por 1,5 m de altura, com isolamento térmico. O gás produzido foi coletado a jusante do leito de gaseificação e condensado para remoção de alcatrão, o qual foi posteriormente quantificado em titulador Karl Fisher. Após remoção do alcatrão o gás foi introduzido em um Micro GC para quantificação dos percentuais molares de H², CO, N² e CH⁴. O perfil de temperatura do leito foi medido com termopares tipo K posicionados ao longo do eixo longitudinal do leito em distâncias de 10 cm. A vazão de ar foi medida com auxilio de um tubo de Pitot e um micromanômetro. As aquisições dos dados de temperatura foram feitas por um data logger e vazão mássica do ar sendo feita usando comunicação RS232 do micromanômetro. Os procedimentos experimentais foram feitos ao longo de 4 horas de operação do leito de gaseificação, com consumo médio de biomassa de 1,6 kg/h, com 6 dados do perfil de temperatura, vazão mássica de ar, perda de carga do leito e concentração dos gases obtidos no processo de gaseificação e quantificação do teor de alcatrão condensável presente no gás. Verificou-se que o gaseificador de leito de açaí pode ser operado através de uma gama bastante ampla de taxas de fluxo de ar de 2 a 5 kg/h, com a quantidade de energia do gás produzido variando de 5 a 15 MJ/h. As concentrações típicas dos gases obtidos no leito foram de 13% de H², 11% de CO, 1,3% de CH⁴. A eficiência máxima de gás frio de 57% e teor médio de alcatrão de 155 g/m³.

Simulação numérica da gaseificação de biomassa em leito fixo

O objetivo deste trabalho foi avaliar a potencialidade das sementes de açaí rejeitadas após beneficiamento em Belém – Pará, a fim de ser usada como fonte de biomassa para a produção de energia por gaseificação. Resultados da análise elementar obtidas no LABCAT – UNB em base seca foram obtidas com percentuais de Carbono, 46,06 %, Hidrogênio 6,01 % Oxigênio 43,37 %, Nitrogênio 4,33 % e Enxofre 0,08%. Tais valores entre outros parâmetros obtidos em estudo experimental realizados por Santos 2011 e Cruz, 2010, foram utilizados para realizar uma simulação numérica do processo de gaseificação por meio de um código FORTRAN zero dimensional desenvolvido especificamente para esta finalidade. Variações da influência da razão de equivalência e teor de umidade nas concentrações de CO, H2 e CH4 foram comparados a resultados experimentais. Um modelo transiente unidimensional também foi analisado. Utilizando a aplicação de um mecanismo de pirólise de dois passos onde o alcatrão primário (ou oxigenados) são inicialmente formados e então craqueados em alcatrão secundário (ou hidrocarbonetos) e outros gases combustíveis. Assim se revela a complexidade dos processos físicos e químicos que ocorrem no reator pelo uso do balanço de energia e massa e com informações das taxas de reação das reções químicas e os processos de transporte físicos. O modelo computacional é capaz de prever o perfil da composição de gases, temperatura, alcatrão primário e secundário ao longo do eixo longitudinal do gaseificador. Foram obtidos resultados para simulações realizadas nos dois modelos e posteriormente analisado tal comportamento em comparação ao resultado experimental obtidos por Santos (2011).

Spatial heterogeneity affecting fish fauna in cascade reservoirs of the Upper Parana Basin, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da tenacidade à fratura em juntas soldadas circunferenciais de tubulações de processo

This work aims to analyze the toughness of a welded joint in the presence of a crack through the analysis of maximum tension the material can withstand the presence of this type of defect, since a discontinuity is likely to occur in this type of joint and its detection and its design is simple, using non-destructive testing techniques. The study will be conducted through the CTOD test - Crack-Tip Opening Displacement, with type specimens SE (B) - Single Edge Bend taken from a weld in the L-C position in relation to the length (longitudinal axis) of a test tube. The main idea is to simulate the welding conditions for the manufacture of industrial pipes, made in boiler shops (pipe-shop) within petrochemical plants. These pipes are often subject to operation with flammable and toxic subjected to high pressures and temperatures, where one can break the line can cause irreparable damage to the plant, the environment and the health of surrounding communities. With this study we evaluate whether the weld metal has the same properties as fracture toughness of the base material. This study shows the importance of using a qualified welding procedure for performing quality welds while maintaining the properties of the fracture toughness of the base metal. It was found from the results of tests using a welding procedure described for carrying out welding ensures mechanical properties very close to the base metal, which in terms of design is great, since one can ensure that the weld will the same characteristics of the base metal specified for the assembly of the pipe