Adequacy of Cold Rolling Models to Upgrade Set-up Generation Systems

This paper presents two strategies for the upgrade of set-up generation systems for tandem cold mills. Even though these mills have been modernized mainly due to quality requests, their upgrades may be made intending to replace pre-calculated reference tables. In this case, Bryant and Osborn mill model without adaptive technique is proposed. As a more demanding modernization, Bland and Ford model including adaptation is recommended, although it requires a more complex computational hardware. Advantages and disadvantages of these two systems are compared and discussed and experimental results obtained from an industrial cold mill are shown.

Verification of system properties of polynomial systems using discrete-time approximations and set-based analysis

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2015

Time and temperature dependant changes in red blood cell analytes used for testing recombinant erythropoietin abuse in sports.

There has been a long debate since the introduction of blood analysis prior to major sports events, to find out whether blood samples should be analysed right away on the site of competition or whether they should be transported and analysed in an anti-doping laboratory. Therefore, it was necessary to measure blood samples and compare the results obtained right after the blood withdrawal with those obtained after a few hours delay. Furthermore, it was interesting to determine the effect of temperature on the possible deterioration of red blood cell analytes used for testing recombinant erythropoietin abuse. Healthy volunteers were asked to give two blood samples and one of these was kept at room temperature whereas the second one was put into a refrigerator. On a regular basis, the samples were rolled for homogenisation and temperature stabilisation and were analysed with the same haematological apparatus. The results confirmed that blood controls prior to competition should be performed as soon as possible with standardised pre-analytical conditions to avoid too many variations notably on the haematocrit and the reticulocyte count. These recommendations should ideally also be applied to the all the blood controls compulsory for the medical follow up, otherwise unexplainable values could be misinterpreted and could for instance lead to a period of incapacity.

Report of Working Group set up by the Tanaiste in March 2006 to examine the nature and extent of Haemochromatosis in Ireland and to advise her on the action necessary to address the problems caused by Haemochromatosis

It was agreed at a meeting on 15th February, 2006, between Ms Mary Harney, TD, Tanaiste and Minister for Health and Children and Dr Maurice Manning that a Working Group would be set up to examine all of the issues relating to haemochromatosis in Ireland and to advise her on the actions necessary to address these issues. Read the Report (PDF, 709kb)  

Mental health and growing up factsheet. Drugs and alcohol - what parents need to know.

Information about drugs and alcohol - what parents need to know: information for parents, carers and anyone who works with young people. About this leaflet This is one in a series of leaflets for parents, teachers and young people entitled Mental Health and Growing Up. These leaflets aim to provide practical, up-to-date information about mental health problems (emotional, behavioural and psychiatric disorders) that can affect children and young people. This leaflet offers practical advice for parents, teachers and carers who are worried that a young person is misusing drugs or alcohol. Why do I need to know about a young person using drugs or alcohol? Many young people smoke, drink alcohol and may try drugs. It is important you are aware of this and do not ignore it as a time when they are just having fun or experimenting. It doesnââ,‰"¢t take much for the young people to soon lose control and to need help to recover from this problem. How common is it? By the age of 16, up to half of young people have tried an illegal drug. Young people are trying drugs earlier and more are drinking alcohol. What are the different types of drugs which cause problems? The most commonly used, readily available and strongly addictive drugs are tobacco and alcohol. There are numerous others that can be addictive. Alcohol and cannabis are sometimes seen as ââ,¬Ëogatewayââ,‰"¢ drugs that lead to the world of other drugs like cocaine and heroin. Drugs are also classed as ââ,¬Ëolegalââ,‰"¢ andââ,¬Ëoillegalââ,‰"¢. The obviously illegal drugs include cannabis (hash), speed (amphetamines), ecstasy (E), cocaine and heroin. Using ââ,¬Ëolegalââ,‰"¢ drugs (like cigarettes, alcohol, petrol, glue) does not mean they are safe or allowed to be misused. It just means they may be bought or sold for specific purposes and are limited to use by specific age groups. There are clear laws regarding alcohol and young people. For more detailed information on various drugs, their side-effects and the law, see ââ,¬ËoFurther Informationââ,‰"¢ at the end of the factsheet. Why do young people use drugs or alcohol? Young people may try or use drugs or alcohol for various reasons. They may do it for fun, because they are curious, or to be like their friends. Some are experimenting with the feeling of intoxication. Sometimes they use it to cope with difficult situations or feelings of worry and low mood. A young person is more likely to try or use drugs or alcohol if they hang out or stay with friends or family who use them. What can be the problems related to using drugs or alcohol? Drugs and alcohol can have different effects on different people. In young people especially the effects can be unpredictable and potentially dangerous. Even medications for sleep or painkillers can be addictive and harmful if not used the way they are prescribed by a doctor. Drugs and alcohol can damage health. Sharing needles or equipment can cause serious infections, such as HIV and hepatitis. Accidents, arguments and fights are more likely after drinking and drug use. Young people are more likely to engage in unprotected sex when using drugs. Using drugs can lead to serious mental illnesses, such as psychosis and depression. When does it become addiction or problem? It is very difficult to know when exactly using drugs or alcohol is more than just ââ,¬Ëocasualââ,‰"¢. Addiction becomes more obvious when the young person spends most of their time thinking about, looking for or using drugs. Drugs or alcohol then become the focus of the young personââ,‰"¢s life. They ignore their usual work, such as not doing their schoolwork, or stop doing their usual hobbies/sports such as dancing or football. How do I know if there is a problem or addiction? Occasional use can be very difficult to detect. If the young person is using on a regular basis, their behaviour often changes. Look for signs such as: ïâ?s§ unexplained moodiness ïâ?s§ behaviour that is ââ,¬Ëoout of character' ïâ?s§ loss of interest in school or friends ïâ?s§ unexplained loss of clothes or money ïâ?s§ unusual smells and items like silver foil, needle covers. Remember, the above changes can also mean other problems, such as depression, rather than using drugs. What do I do if I am worried? If you suspect young person is using drugs, remember some general rules. ïâ?s§ Pay attention to what the child is doing, including schoolwork, friends and leisure time. ïâ?s§ Learn about the effects of alcohol and drugs (see websites listed below). ïâ?s§ Listen to what the child says about alcohol and drugs, and talk about it with them. ïâ?s§ Encourage the young person to be informed and responsible about drugs and alcohol. ïâ?s§ Talk to other parents, friends or teachers about drugs - the facts and your fears and seek help. If someone in the family or close friend is using drugs or alcohol, it is important that they seek help too. It may be hard to expect the young person to give up, especially if a parent or carer is using it too. My child is abusing drugs. What do I do? ïâ?s§ If your child is using drugs or alcohol, seek help. ïâ?s§ Do stay calm and make sure of facts. ïâ?s§ Don't give up on them, get into long debates or arguments when they are drunk, stoned or high. ïâ?s§ Donââ,‰"¢t be angry or blame themââ,‰?othey need your help and trust to make journey of recovery. Where can I get help? You can talk in confidence to a professional like your GP or practice nurse, a local drug project or your local child and adolescent mental health. They can refer your child to relevant services and they will be able to offer you advice and support. You may also be able to seek help through a school nurse, teacher or social worker. You can find this information from your local area telephone book or council website, or ask for the address from your health centre. [For the full factsheet, click on the link above]This resource was contributed by The National Documentation Centre on Drug Use.

Solving two production scheduling problems with sequence-dependent set-up times

In today’s competitive markets, the importance of goodscheduling strategies in manufacturing companies lead to theneed of developing efficient methods to solve complexscheduling problems.In this paper, we studied two production scheduling problemswith sequence-dependent setups times. The setup times areone of the most common complications in scheduling problems,and are usually associated with cleaning operations andchanging tools and shapes in machines.The first problem considered is a single-machine schedulingwith release dates, sequence-dependent setup times anddelivery times. The performance measure is the maximumlateness.The second problem is a job-shop scheduling problem withsequence-dependent setup times where the objective is tominimize the makespan.We present several priority dispatching rules for bothproblems, followed by a study of their performance. Finally,conclusions and directions of future research are presented.

Parallel scheduling of multiclass M/M/m queues: Approximate and heavy-traffic optimization of achievable performance

We address the problem of scheduling a multiclass $M/M/m$ queue with Bernoulli feedback on $m$ parallel servers to minimize time-average linear holding costs. We analyze the performance of a heuristic priority-index rule, which extends Klimov's optimal solution to the single-server case: servers select preemptively customers with larger Klimov indices. We present closed-form suboptimality bounds (approximate optimality) for Klimov's rule, which imply that its suboptimality gap is uniformly bounded above with respect to (i) external arrival rates, as long as they stay within system capacity;and (ii) the number of servers. It follows that its relativesuboptimality gap vanishes in a heavy-traffic limit, as external arrival rates approach system capacity (heavy-traffic optimality). We obtain simpler expressions for the special no-feedback case, where the heuristic reduces to the classical $c \mu$ rule. Our analysis is based on comparing the expected cost of Klimov's ruleto the value of a strong linear programming (LP) relaxation of the system's region of achievable performance of mean queue lengths. In order to obtain this relaxation, we derive and exploit a new set ofwork decomposition laws for the parallel-server system. We further report on the results of a computational study on the quality of the $c \mu$ rule for parallel scheduling.

Changes in leisure time and occupational physical activity over 8 years: The Cornellà health Interview Survey Follow-Up Study

Aim: To describe changes in leisure time and occupational physical activity status in an urban Mediterranean population-based cohort, and to evaluate sociodemographic, health-related and lifestyle correlates of such changes. Methods: Data for this study come from the Cornellè Health Interview Survey Follow-Up Study, a prospective cohort study of a representative sample (n¿=¿2500) of the population. Participants in the analysis reported here include 1246 subjects (567 men and 679 women) who had complete data on physical activity at the 1994 baseline survey and at the 2002 follow-up. We fitted Breslow-Cox regression models to assess the association between correlates of interest and changes in physical activity. Results: Regarding leisure time physical activity, 61.6% of cohort members with ¿sedentary¿ habits in 1994 changed their status to ¿light/moderate¿ physical activity in 2002, and 70% who had ¿light/moderate¿ habits in 1994 did not change their activity level. Regarding occupational physical activity, 74.4% of cohort members who were ¿active¿ did not change their level of activity, and 64.3% of participants with ¿sedentary¿ habits in 1994 changed to ¿active¿ occupational physical activity. No clear correlates of change in physical activity were identified in multivariate analyses. Conclusion: While changes in physical activity are evident in this population-based cohort, no clear determinants of such changes were recognised. Further longitudinal studies including other potential individual and contextual determinants are needed to better understand determinants of changes in physical activity at the population level.

Detailed analysis and follow-up studies of a high-throughput screening for indoleamine 2,3-dioxygenase 1 (IDO1) inhibitors.

Indoleamine 2,3-dioxygenase 1 (IDO1) is a key regulator of immune responses and therefore an important therapeutic target for the treatment of diseases that involve pathological immune escape, such as cancer. Here, we describe a robust and sensitive high-throughput screen (HTS) for IDO1 inhibitors using the Prestwick Chemical Library of 1200 FDA-approved drugs and the Maybridge HitFinder Collection of 14,000 small molecules. Of the 60 hits selected for follow-up studies, 14 displayed IC50 values below 20 μM under the secondary assay conditions, and 4 showed an activity in cellular tests. In view of the high attrition rate we used both experimental and computational techniques to identify and to characterize compounds inhibiting IDO1 through unspecific inhibition mechanisms such as chemical reactivity, redox cycling, or aggregation. One specific IDO1 inhibitor scaffold, the imidazole antifungal agents, was chosen for rational structure-based lead optimization, which led to more soluble and smaller compounds with micromolar activity.

Strategic supply lead time management. Case Nokia Networks, Hardware Services

Teollisuuden palveluiden on huomattu olevan potentiaalinen lisätulojen lähde. Teollisuuden palveluiden dynaamisessa maailmassa räätälöinti ja kyky toimia nopeasti ovat kriittisiä asiakastyytyväisyyden ja kilpailuedun luomisprosessin osia. Toimitusketjussa käytetyn ajan lyhentämisellä voidaan saavuttaa sekä paremmat vasteajat, että alhaisemmat kokonaiskustannukset. Tutkielman tavoitteena on kuvata teollisuuden palveluiden dynaamista ympäristöä: asiakastarvetta, sekä mahdollisuuksia kaventaa pyydetyn ja saavutetun toimitusajan välistä eroa. Tämä toteutetaan pääosin strategisen toimitusajan hallinnan keinoin. Langattomien tietoliikenneverkkojen operaattorit haluavat vähentää ydinosaamiseensa kuulumatomiin toimintoihin, kuten ylläpitoon sitoutuneita pääomia. Tutkielman case osiossa varaosapalvelujen toimitusketjun kysyntä-, materiaali- ja informaatiovirtoja analysoidaan niin kvalitatiivisten haastatteluiden, sisäisten dokumenttien, kuin kvantitatiivisten tilastollisten menetelmienkin avulla. Löydöksiä peilataan vallitsevaa toimitusketjun ja ajanhallinnan paradigmaa vasten. Tulokset osoittavat, että vahvan palvelukulttuurin omaksuminen ja kokonaisvaltainen toimitusketjun tehokkuuden mittaaminen ovat ajanhallinnan lähtökohtia teollisuuden palveluissa.

Planning and ramping up a new SW Testing site

During recent years, mobile phone markets have changed significantly. Asian markets have become vital for the manufacturers with their millions of end users and multiple major mobile network operators. This has resulted in software development as global companies have research and development sites running in multiple locations, including Asia. The reasons behind this are not only in reducing labor costs but also in capitalizing on the local knowledge and knowhow. A ramp-up site has multiple effects in the software development and software release activities. This thesis focuses on representing the importance of software testing as part of software development process and highlighting issues that need to be considered during ramp-up activities. In addition this work tries to emphasize the importance of communication between parties and information gathering prior to setting up the ramp-up site. The output of this thesis was successful software testing site ramp-up within the set time limits. The quality of software testing work was assured and the ramp-up -project requirements were achieved.

Lean Six Sigma in a Manufacturing Lead Time Improvement Project

The objective of this research is to demonstrate the use of Lean Six Sigma methodology in a manufacturing lead time improvement project. Moreover, the goal is to develop working solutions for the target company to improve its manufacturing lead time. The theoretical background is achieved through exploring the literature of Six Sigma, Lean and Lean Six Sigma. The development will be done in collaboration with the related stakeholders, by following the Lean Six Sigma improvement process DMAIC and by analyzing the process data from the target company. The focus of this research is in demonstrating how to use Lean Six Sigma improvement process DMAIC in practice, rather than in comparing Lean Six Sigma to other improvement methodologies. In order to validate the manufacturing system’s current state, improvement potential and solutions, statistical tools such as linear regression analysis were used. This ensured that all the decisions were as heavily based on actual data as possible. As a result of this research, a set of solutions were developed and implemented in the target company. These solutions included batch size reduction, bottleneck shift, first-in first-out queuing and shifting a data entry task from production planners to line workers. With the use of these solutions, the target company was able to reduce its manufacturing lead time by over one third.

Set-up and evaluation of a mid-infrared reflectometer and investigation of the optical properties of doped tin telluride

A system comprised of a Bomem interferometer and a LT3-110 Heli-Tran cryostat was set up to measure the reflectance of materials in the mid-infrared spectral region. Several tests were conducted to ensure the consistency and reliability of the system. Silicon and Chromium, two materials with well known optical properties were measured to test the accuracy of the system, and the results were found to be in good agreement with the literature. Reflectance measurements on pure SnTe and several Pb and Mn-doped alloys were carried out. These materials were chosen because they exhibit a strong plasma edge in the mid infrared region. The optical conductivity and several related optical parameters were calculated from the measured reflectance. Very low temperature measurements were carried out in the far-infrared on Sn9SMn2Te, and the results are indicative of a spin glass phase at 0.8 K. Resistivity measurements were made at room temperature. The resistivity values were found, as expected, to decrease with increasing carrier concentration and to increase with increasing manganese concentration.

Transmission measurements using a new far-infrared set-up

A system comprised of a Martin-Puplett type polarizing interferometer and a Helium-3 cryostat was developed to study the transmission of materials in the very-far-infrared region of the spectrum. This region is of significant interest due to the low-energy excitations which many materials exhibit. The experimental transmission spectrum contains information concerning the optical properties of the material. The set-up of this system is described in detail along with the adaptations and improvements which have been made to the system to ensure the best results. Transmission experiments carried out with this new set-up for two different varieties of materials: superconducting thin films of lead and biological proteins, are discussed. Several thin films of lead deposited on fused silica quartz substrates were studied. From the ratio of the transmission in the superconducting state to that in the normal state the superconducting energy gap was determined to be approximately 25 cm-1 which corresponds to 2~/kBTc rv 5 in agreement with literature data. Furthermore, in agreement with theoretical predictions, the maximum in the transmission ratio was observed to increase as the film thickness was increased. These results provide verification of the system's ability to accurately measure the optical properties of thin low-Tc superconducting films. Transmission measurements were carried out on double deionized water, and a variety of different concentrations by weight of the globular protein, Bovine Serum Albumin, in the sol, gel and crystalline forms. The results of the water study agree well with literature values and thus further illustrate the reproducibility of the system. The results of the protein experiments, although preliminary, indicate that as the concentration increases the samples become more transparent. Some weak structure in the frequency dependent absorption coefficient, which is more prominent in crystalline samples, may be due to low frequency vibrations of the protein molecules.