988 resultados para Layered structure


Relevância:

70.00% 70.00%

Publicador:

Resumo:

Energy storage technologies are crucial for efficient utilization of electricity. Supercapacitors and rechargeable batteries are of currently available energy storage systems. Transition metal oxides, hydroxides, and phosphates are the most intensely investigated electrode materials for supercapacitors and rechargeable batteries due to their high theoretical charge storage capacities resulted from reversible electrochemical reactions. Their insulating nature, however, causes sluggish electron transport kinetics within these electrode materials, hindering them from reaching the theoretical maximum. The conductivity of these transition metal based-electrode materials can be improved through three main approaches; nanostructuring, chemical substitution, and introducing carbon matrices. These approaches often lead to unique electrochemical properties when combined and balanced.

Ethanol-mediated solvothermal synthesis we developed is found to be highly effective for controlling size and morphology of transition metal-based electrode materials for both pseudocapacitors and batteries. The morphology and the degree of crystallinity of nickel hydroxide are systematically changed by adding various amounts glucose to the solvothermal synthesis. Nickel hydroxide produced in this manner exhibited increased pseudocapacitance, which is partially attributed to the increased surface area. Interestingly, this morphology effect on cobalt doped-nickel hydroxide is found to be more effective at low cobalt contents than at high cobalt contents in terms of improving the electrochemical performance.

Moreover, a thin layer of densely packed nickel oxide flakes on carbon paper substrate was successfully prepared via the glucose-assisted solvothermal synthesis, resulting in the improved electrode conductivity. When reduced graphene oxide was used for conductive coating on as-prepared nickel oxide electrode, the electrode conductivity was only slightly improved. This finding reveals that the influence of reduced graphene oxide coating, increasing the electrode conductivity, is not that obvious when the electrode is already highly conductive to begin with.

We were able to successfully control the interlayer spacing and reduce the particle size of layered titanium hydrogeno phosphate material using our ethanol-mediated solvothermal reaction. In layered structure, interlayer spacing is the key parameter for fast ion diffusion kinetics. The nanosized layered structure prepared via our method, however, exhibited high sodium-ion storage capacity regardless of the interlayer spacing, implying that interlayer space may not be the primary factor for sodium-ion diffusion in nanostructured materials, where many interstitials are available for sodium-ion diffusion.

Our ethanol-mediated solvothermal reaction was also effective for synthesis of NaTi2(PO4)3 nanoparticles with uniform size and morphology, well connected by a carbon nanotube network. This composite electrode exhibited high capacity, which is comparable to that in aqueous electrolyte, probably due to the uniform morphology and size where the preferable surface for sodium-ion diffusion is always available in all individual particles.

Fundamental understandings of the relationship between electrode microstructures and electrochemical properties discussed in this dissertation will be important to design high performance energy storage system applications.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Technical diversity and various knowledge is required for the understanding of undoubtedly complex system such as a Lithium-ion battery. The peculiarity is to combine different techniques that allow a complete investigation while the battery is working. Nowadays, research on Li-ion batteries (LIBs) is experiencing an exponential growth in the development of new cathode materials. Accordingly, Li-rich and Ni-rich NMCs, which have similar layered structure of LiMO2 oxides, have been recently proposed. Despite the promising performance on them, still a lot of issues have to be resolved and the materials need a more in depth characterisation for further commercial applications. In this study LiMO2 material, in particular M = Co and Ni, will be presented. We have focused on the synthesis of pure LiCoO2 and LiNiO2 at first, followed by the mixed LiNi0.5Co0.5O2. Different ways of synthesis were investigated for LCO but the sol-gel-water method showed the best performances. An accurate and systematic structural characterization followed by the appropriate electrochemical tests were done. Moreover, the in situ techniques (in-situ XRD and in situ OEMS) allowed a deep investigation in the structural change and gas evolution upon the electrochemically driven processes.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Although it is currently believed that the vocal ligament of humans undergoes considerable development postnatally, there is no consensus as to the age at which it first emerges. In the newborn infant, the lamina propria has been described as containing a sparse collection of relatively unorganized fibres. In this study we obtained larynges from autopsy of human fetuses aged 7-9 months and used light and electron microscopy to study the collagenous and elastic system fibres in the lamina propria of the vocal fold. Collagen fibres were viewed using the Picrosirius polarization method and elastic system fibres were stained using Weigert`s resorcin-fuchsin after oxidation with oxone. The histochemical and electron microscopic observations were consistent, showing collagen populations with an asymmetric distribution across different compartments of the lamina propria. In the central region, the collagen appeared as thin, weakly birefringent, greenish fibres when viewed using the Picrosirius polarization method, whereas the superficial and deep regions contained thick collagen fibres that displayed a strong red or yellow birefringence. These findings suggest that the thin fibres in the central region consist mainly of type III collagen, whereas type I collagen predominates in the superficial and deep regions, as has been reported in studies of adult vocal folds. Similarly, elastic system fibres showed a differential distribution throughout the lamina propria. Their distribution pattern was complementary to that of collagen fibres, with a much greater density of elastic fibres apparent in the central region than in the superficial and deep regions. This distribution of collagen and elastic fibres in the fetal vocal fold mirrors that classically described for the adult vocal ligament, suggesting that a vocal ligament has already begun to develop by the time of birth. The apparently high level of organization of connective tissue components in the newborn is in contrast to current hypotheses that argue that the mechanical stimuli of phonation are essential to the determination of the layered structure of the lamina propria and suggests that genetic factors may play a more significant role in the development of the vocal ligament than previously believed.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Dissertation presented to obtain a Ph.D. degree in Engineering and Technology Sciences, Systems Biology at the Instituto de Tecnologia Química e Biológica, Universidade Nova de Lisboa

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Treball de recerca realitzat per alumnes d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit cientí­fic del Jovent l'any 2009. Aquest treball intenta resoldre la qüestió de si l'energia solar arribarà a ser una energia alternativa que esdevingui un substitut del petroli en el futur. Aquest projecte informa de totes les característiques i propietats de les plaques solars, explicant els avantatges que fan que sigui un recurs energètic molt net, segur i, encara que en un principi es pugui veure car, finalment arriba a amortitzar el preu inicial fins aconseguir un estalvi monetari, que és el que atreu al màxim de compradors. El projecte parla de les característiques de les plaques solars fotovoltaiques explicant així tots els materials pels quals és formada, la seva estructura per capes i el procés de transformació de llum en electricitat. Conté, també, una part pràctica extensa i elaborada: s'ha demanat a diversos ciutadans, sobretot de Cerdanyola del Vallès i també de Barcelona, sobre el tipus de contacte que tenen amb aquesta energia renovable i si no és així, saber quin altre tipus de font energètica utilitzen. També conté una entrevista a un professional del món de l'energia solar. I, finalment, s'ha realitzat el disseny, muntatge i funcionament d'un cotxe elèctric solar.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

This study describes spermatogenesis in a majid crab (Maja brachydactyla) using electron microscopy and reports the origin of the different organelles present in the spermatozoa. Spermatogenesis in M. brachydactyla follows the general pattern observed in other brachyuran species but with several peculiarities. Annulate lamellae have been reported in brachyuran spermatogenesis during the diplotene stage of first spermatocytes, the early and mid-spermatids. Unlike previous observations, a Golgi complex has been found in midspermatids and is involved in the development of the acrosome. The Golgi complex produces two types of vesicles: light vesicles and electron-dense vesicles. The light vesicles merge into the cytoplasm, giving rise to the proacrosomal vesicle. The electron-dense vesicles are implicated in the formation of an electron-dense granule, which later merges with the proacrosomal vesicle. In the late spermatid, the endoplasmic reticulum and the Golgi complex degenerate and form the structures–organelles complex found in the spermatozoa. At the end of spermatogenesis, the materials in the proacrosomal vesicle aggregate in a two-step process, forming the characteristic concentric three-layered structure of the spermatozoon acrosome. The newly formed spermatozoa from testis show the typical brachyuran morphology.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

UMTS is a 3rd generation telecommunication system, which introduces new network architecture. The change in the network architecture introduces new logical network nodes and changes the role of existing nodes in the network. This architecture changes the current vertically specialized network into a horizontally layered structure. In practice, the layering means that different levels in network hierarchy are separated, and they communicate over well-specified interfaces. The Connectivity Layer, at the bottom of the UMTS network architecture, contains Media Gateways (MGW). The GSM radio access network and UMTS access network are connected to the connectivity network via a MGW. External networks, e.g. ISDN networks, are accessed via other MGWs. The user plane is transported across the connectivity network between/via MGWs. ATM network is used as the backbone in Ericsson’s UMTS core network release 2.0. The main goal of this thesis is to study how the MGW is used to bridge ATM and TDM networks. The Circuit Emulation Service (CES) for ATM is studied, as the conversion from TDM to ATM is made according it. The transportation is made using AAL2 and the issues that it has with voice traffic are studied. The implementation and usage of TDM switching service in MGW are described in detail.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Lattialaminaatti on kerrosrakenteinen levymateriaali. Tässä työssä tutkittiin laminaatin epäsymmetrisen kerrosrakenteen aiheuttamaa taipumusta käyristymiseen. Työn tavoitteena oli kehittää lattialaminaatin käyristymän hallintaan käytettävää taustapaperia niin, että käyristymää ei tapahtuisi tai käyristymä olisi lievästi alapintaa kohden heti puristuksen jälkeen ja säilyisi samanlaisena varastoinnissa. Kehityksessä huomioitiin taustan ulkonäkö. Taustapapereita valmistettiin sekä pilot- että tuotantomittakaavassa. Lisäksi työssä tutkittiin laminointiolosuhteiden vaikutusta lattialaminaatin käyristymään. Työn kirjallisuusosassa käsitellään lattialaminaatin valmistusta huomioiden ulkonäköön vaikuttavat tekijät sekä lattialaminaatin käyristymiseen vaikuttavia tekijöitä.Lattialaminaatin käyristymään vaikuttavat laminointiolosuhteet. Puulevyä vasten puristettavat kalvot kutistuvat laminoinnissa, erityisesti puristuslämpötilan kasvaessa. Laminaatin puristuksen jälkeinen käyristymä määräytyy lähinnä ylä- ja alapinnan kalvojen kutistuman erolla.Lattialaminaatin käyristymään varastoinnissa vaikuttaa ylä- ja alapinnan kalvojen dimensiostabiliteettikerroin. Yläpinnan kalvon dimensiostabiliteetti on huonompi kuin alapinnan, jolloin yläpinnan kalvo kutistuu enemmän kuivissa olosuhteissa käyristäen samalla laminaattia positiiviseen suuntaan.Taustapaperin ominaisuuksista merkittävimmin laminaatin käyristymään vaikuttaa kuituraaka-aine. Lattialaminaatin ulkonäköön vaikuttavat pinnassa olevat kuopat. Laminaatin taustan ulkonäköä voidaan parantaa lisäämällä taustapaperiin pehmitintä. Vääräntyyppisellä pehmittimellä menetetään taustan vastavetovoimaa.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Diplomityön tavoitteena oli selvittää millaisia mikroaaltopahveihin käytettävien lainerikartonkien tulisi olla ja mitä ominaisuuksia niiltä vaaditaan. Työ on jaettu kirjallisuusosaan ja kokeelliseen osaan. Kirjallisuusosassa esitellään nykyisin käytetyt aaltopahvin raaka-aineet, aaltoprofiilit ja aaltopahvin valmistusprosessi sekä raaka-aineiden ja valmiin aaltopahvin testausmenetelmät ja tärkeät ominaisuudet. Kokeellinen osa koostuu laboratoriokokeista, pilot-koeajoista ja aaltopahvin valmistuksesta. Kokeellisen osan laboratoriovaiheessa käytetty massa fraktioitiin lyhyeen ja pitkään fraktioon. Lyhyestä ja pitkästä fraktioista valmistettiin eri fraktio-osuuksilla yksi- ja kaksikerrosarkkeja. Laboratorioarkkien neliömassa-alue oli 70 - 125 g/m2. Lisäksi muuttujana oli tiheys. Laboratoriomittausten perusteella parhaimmat rakenteet valittiin ajettavaksi pilot-mittakaavan koekartonkikoneella. Koekoneella valmistetuista yksi- ja kaksikerroskartongeista valmistettiin tehdasmittakaavassa F-aaltopahvia ja saadut rakenneyhdistelmät testattiin. Koetulosten perusteella voidaan sanoa, että mikroaaltolainerille on olemassa optimaalinen rakenne, joka riippuu painotettavasta ominaisuudesta. Pintaominaisuuksien painottaminen johtaa erilaiseen rakenteeseen kuin lujuusominaisuuksien painottaminen. Myös lainerin käyttökohde (pinta- tai taustalaineri) johtaa erilaiseen optimaaliseen rakenteeseen.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Työssä verrattiin perälaatikoilla 1 ja 2 valmistettujen papereiden rakenteellisia ominaisuuksia. Paperin rakenteessa formaatio oli tärkein ominaisuus ja sen jälkeen kuituorientaatio. Näytteiden valintaperusteena pidettiin sitä, että vertailtavilla näytteillä formaatio (pohja) oli paras kyseisellä perälaatikolla ja vetolujuussuhteet olivat samoja. Toinen valintatapa oli verrata samoissa virtausolosuhteissa valmistettuja papereita keskenään. Näytteiden formaatio mitattiin betaradiografialla. Fosforikuvalevystä skannattu kuva analysoitiin kuva-analyysillä. Mittauksen etuna oli suuri erottelukyky, joka mahdollisti monipuolisen tunnuslukujen laskennan. Näistä esimerkkeinä olivat keskihajonta, vinous ja huipukkuus. Lisäksi määritettiin flokkikokojakaumat sekä kone- että poikkisuuntaan. Kuituorientaation määrityksessä paperinäyte revittiin kerroksiin, kerrokset skannattiin ja kuvat analysoitiin kuvankäsittelyohjelmilla. Juova- ja kuituorientaatioanalyysissä määritettiin orientaatiokulma, max/min-arvo ja anisotropia. Virtaviiva-analyysin tunnusluku oli pyörrekoko. Käytettäessä tunnuslukuna variaatiokerrointa formaatio oli parempi perälaatikolla 1 ali- ja yliperällä. Tasaperän läheisyydessä formaatio oli huonompi. Keskihajonta oli pienempi perälaatikolla 1, mutta erot perälaatikoiden välillä tasaantuivat lähellä tasaperää. Flokkikoko oli koko s/v-alueella hieman suurempi perälaatikolla 1. Virtaviiva-analyysin avulla saatiin selville, että perälaatikolla 1 valmistettujen papereiden paikallinen orientaatiovaihtelu ja pintojen toispuoleisuus oli lievempää kuin perälaatikolla 2.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Water withdrawal from Mediterranean reservoirs in summer is usually very high. Because of this, stratification is often continuous and far from the typical two-layered structure, favoring the excitation of higher vertical modes. The analysis of wind, temperature, and current data from Sau reservoir (Spain) shows that the third vertical mode of the internal seiche (baroclinic mode) dominated the internal wave field at the beginning of September 2003. We used a continuous stratification two-dimensional model to calculate the period and velocity distribution of the various modes of the internal seiche, and we calculated that the period of the third vertical mode is ;24 h, which coincides with the period of the dominating winds. As a result of the resonance between the third mode and the wind, the other oscillation modes were not excited during this period

Relevância:

60.00% 60.00%

Publicador:

Resumo:

In the present work we present geometric models of the most studied MoO3 surfaces, which were obtained using the DTMM 2.0 Molecular Modeller software. MoO3 has an orthorhombic layered structure, with each layer comprised of two interleaved planes of MoO6 octahedral. These layers are parallel to the (010) crystal plane and only oxygen ions are exposed on their surfaces. This situation results in weak van der Waals bonding between layers and in a relatively inert surface. In our approach to surface geometric structure we consider "ideal" crystal surface, in which the bulk atomic arrangement is maintained. These surfaces were generated by imaginary cleavage along appropriate planes in the bulk crystal structure.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The niobate with formula K4Nb6O17 has a layered structure formed by stacked negative sheets and exchangeable cations in the interlayer region. In this study we discuss some structural aspects related to the ion exchange in layered hexaniobate based on X-ray diffractometry and vibrational Raman spectroscopy data. Hexaniobate has two distinct interlayer regions and the potassium ions of one interlayer in particular are preferably exchanged by other cations, leading to an interstratified material.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Palm oil containing 40% fatty acids was converted to methyl esters using zinc carboxylates as the esterification/transesterification catalyst. The reaction was optimized using a factorial design in which the effects of the alcohol:fatty acids molar ratio (MRAG) and the catalyst concentration (CAT) were assessed. The best conversion was achieved with CAT at 4 wt% and MRAG at 4:1. However, the solid catalyst presented significant structural changes after use. For instance, laurate anions were replaced by carboxylates of higher molecular mass, leading to the formation of a new catalytically active layered structure. Also, the glycerin obtained as a co-product contained 86 wt% glycerol.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The presented thesis is devoted to investigation of wave processes in hybrid ferrite / ferroelectric structures. Spin wave devices based on ferrite films have such disadvantages, as huge size of the magnetic systems, low tuning velocity, considerable power inputs for parameters control that limits possible device applications. The considered layered structures allow to overcome the disadvantages mentioned and to promote the development of novel class of tunable microwave devices. The proposed theoretical analysis is intended to construct a model of hybrid electromagnetic-spin waves. Based on the theoretical analysis the experimental investigations were carried out. The experimental resonance characteristics of ferrite / ferroelectric resonator were obtained and their tunability by means of magnetic and electric field was demonstrated.