131 resultados para Lamm
Resumo:
The velocity of dripline flushing in subsurface drip irrigation (SDI) systems affects system design, cost, management, performance, and longevity. A 30‐day field study was conducted at Kansas State University to analyze the effect of four targeted flushing velocities (0.23, 0.30, 0.46, and 0.61 m/s) for a fixed 15 min duration of flushing and three flushing frequencies (no flushing or flushing every 15 or 30 days) on SDI emitter discharge and sediments within the dripline and removed in the flushing water. At the end of the field experiment (371 h), the amount of solids carried away by the flushing water and retained in every lateral were determined as well as laboratory determination of emitter discharge for every single emitter within each dripline. Greater dripline flushing velocities, which also resulted in greater flushing volumes, tended to result in greater amounts of solids in the flushing water, but the differences were not always statistically significant. Neither the frequency of flushing nor the interaction of flushing frequency and velocity significantly affected the amount of solids in the flushing water. There was a greater concentration of solids in the beginning one‐third of the 90 m laterals, particularly for treatments with no flushing or with slower dripline flushing velocities. As flushing velocity and concurrently flushing volume increased, there was a tendency for greater solids removal and/or more equal distribution within the dripline. At the end of the field study, the average emitter discharge as measured in the laboratory for a total of 3970 emitters was 0.64 L/h. which was significantly less (approximately 2.5%) than the discharge for new and unused emitters. Only six emitters were nearly or fully clogged, with discharges between 0% and 5% of new and unused emitters. Flushing velocity and flushing frequency did not have consistent significant effects on emitter discharge, and those numerical differences that did exist were small (<3%). Emitter discharge was approximately 3% less for the distal ends of the driplines (last 20% of the dripline). Although not a specific factor in the study, the results of solids removals during flushing and solids retention within the different dripline sections suggest that duration of flushing may be a more cost‐effective management option than increasing the dripline flushing velocity through SDI system design. Finally, although microirrigation system components have been improved over the years, the need for flushing to remove solids and reduce clogging potential has not been eliminated
Resumo:
Emitter spacings of 0.3 to 0.6 m are commonly used for subsurface drip irrigation (SDI) of corn on the deep, silt loam soils of the U.S. Great Plains. Subsurface drip irrigation emitter spacings of 0.3, 0.6, 0.9 and 1.2 m were examined for the resulting differences in soil water redistribution, corn grain yield, yield components, seasonal water use, and water productivity in a 4‐year field study (2005 through 2008) at the Kansas State University Northwest Research‐Extension Center, Colby, Kansas. The results indicate that there is increased preferential water movement along the dripline (parallel) as compared to perpendicular to the dripline and that this phenomenon partially compensates for wider emitter spacings in terms of soil water redistribution. Corn yield and water productivity (WP) were not significantly affected by the emitter spacing with application of a full irrigation regime
Resumo:
Flushing is an important maintenance task that removes accumulated particles in microirrigation laterals that can help to reduce clogging problems. The effect of three dripline flushing frequency treatments (no flushing, one flushing at the end of each irrigation period, and a monthly flushing during the irrigation period) was studied in surface and subsurface drip irrigation systems that operated using a wastewater treatment plant effluent for three irrigation periods of 540 h each. The irrigation systems had two different emitters, one pressure compensating and the other not, both molded and welded onto the interior dripline wall, placed in laterals 87 meters long. Dripline flow of the pressure compensating emitter increased 8% over time, while in the nonpressure compensating emitter, dripline flow increased 25% in the surface driplines and decreased 3% in the subsurface driplines by the emitter clogging. Emitter clogging was affected primarily by the interactions between emitter location, emitter type, and flushing frequency treatment. The number of completely clogged emitters was affected by the interaction between irrigation system and emitter type. There was an average of 3.7% less totally clogged emitters in flushed surface driplines with the pressurecompensating emitter as compared to flushed subsurface laterals with the nonpressure compensating emitter
Resumo:
Ennen jokaista preludia esitetään koraali johon kyseinen preludi perustuu.
Resumo:
Le vieillissement démographique augmente rapidement la représentation des personnes âgées de plus de 50 ans parmi les utilisateurs d’aides à la mobilité motorisées (AMMs), telles que le fauteuil roulant motorisé et le quadriporteur. Le but général de la thèse est de rendre compte d’une démarche d’analyse des effets des AMMs au cours des premiers 18 mois d’utilisation chez les adultes d’âge moyen et les aînés. Notre question de recherche concerne la nature et l'importance des effets sur le fonctionnement, la pertinence sociale et le bien-être subjectif, ainsi que les liens entre les divers facteurs impliqués dans leur impact optimal. La thèse s’articule en trois volets, synthétique, méthodologique et analytique, dont les principaux résultats sont présentés dans quatre articles scientifiques. Le volet synthétique comprend une recension systématique qui révèle la représentation marginale des personnes âgées de plus de 50 ans dans les publications scientifiques sur les effets des AMMs et le faible niveau de preuve dans ce champ d’études. Les travaux liés à ce volet proposent également un cadre d’analyse reliant l’intention d’utiliser l’AMM, les habitudes de déplacements, les dimensions d’effets des AMMs sur le fonctionnement, la pertinence sociale et le bien-être subjectif, ainsi que quatre catégories de cofacteurs associés à l’utilisation (personne, aide technique, intervention, environnement). Le volet méthodologique assemble un dispositif de mesure comprenant 5 questionnaires et 18 indicateurs arrimés au cadre d’analyse et démontre l’applicabilité de l’ensemble des questionnaires pour une administration téléphonique. La validation transculturelle de deux questionnaires implique deux études réalisées auprès d’utilisateurs d’AMMs âgés de 50 à 84 ans (n=45). Ces travaux confirment la fidélité test-retest et l’équivalence des questionnaires traduits avec la version d’origine. Finalement, le volet analytique se concentre sur l’étude des habitudes de déplacements chez 3 cohortes (n=116) de personnes âgées de 50 à 89 ans, recrutées en fonction du stade d’utilisation de l’AMM. Les résultats suggèrent une amélioration de l’aire de mobilité après l’utilisation initiale ou long terme de l’AMM en comparaison avec une cohorte en attente de l’AMM, ainsi qu’une augmentation significative de la fréquence des déplacements autour du domicile et dans le voisinage. Trois facteurs associés à une aire de mobilité optimale, à savoir le genre, la nature des objectifs de participation de l’utilisateur et le type d’appareil utilisé, sont identifiés par des analyses de régression linéaires contrôlant pour l’âge. La thèse soutient l’importance de tenir compte de l’environnement et d’une combinaison de facteurs reliés à la personne et à l’aide technique pour saisir les effets des AMMs au cours des premiers mois d’utilisation. Ces résultats ouvrent la voie au suivi systématique des utilisateurs d’AMMs par les professionels de réadaptation, puisqu’ils confirment l’utilité du dispositif pour en mesurer les effets et ciblent les déterminants de la mobilité des utilisateurs d’AMMs âgés de plus de 50 ans.
Resumo:
Emitter spacings of 0.3 to 0.6 m are commonly used for subsurface drip irrigation (SDI) of corn on the deep, silt loam soils of the U.S. Great Plains. Subsurface drip irrigation emitter spacings of 0.3, 0.6, 0.9 and 1.2 m were examined for the resulting differences in soil water redistribution, corn grain yield, yield components, seasonal water use, and water productivity in a 4‐year field study (2005 through 2008) at the Kansas State University Northwest Research‐Extension Center, Colby, Kansas. The results indicate that there is increased preferential water movement along the dripline (parallel) as compared to perpendicular to the dripline and that this phenomenon partially compensates for wider emitter spacings in terms of soil water redistribution. Corn yield and water productivity (WP) were not significantly affected by the emitter spacing with application of a full irrigation regime
Resumo:
Elastic scattering of (8)B and (7)Be on a (58)Ni target has been measured at energies near the Coulomb barrier. The total reaction cross sections were deduced from Optical-model fits to the experimental angular distributions. Comparison with other systems shows evidence for proton-halo effects on (8)B, as well as for neutron-halo on (6)He reactions. While the enhancement in the cross section observed for (8)B is explained in terms of projectile breakup, in the case of (6)He reactions, the particle transfer proces explains the observed enhancement.
Resumo:
The elastic channel of the (8)B + (58)Ni system has been measured at energies around the Coulomb barrier. An optical potential fi to the experimental angular distributions is obtained. The total reaction cross section consistent with the obtained potential is reported and possible deviations from normal behaviour are discussed.
Resumo:
A search for physics beyond the standard model involving events with one or more photons, jets, and missing transverse energy has been performed by the CMS experiment. The data sample corresponds to an integrated luminosity of 4.93 fb-1 of proton-proton collisions at √s =7 TeV, produced at the Large Hadron Collider. No excess of events with large missing transverse energy is observed beyond expectations from standard model processes, and upper limits on the signal production cross sections for new physics processes are set at the 95% confidence level. The results of this search are interpreted in the context of three models of new physics: a general model of gauge-mediated supersymmetry breaking, Simplified Models, and a theory involving universal extra dimensions. In the absence of evidence for new physics, exclusion regions are derived in the parameter spaces of the respective models.[Figure not available: see fulltext.] © 2013 CERN for the benefit of the CMS collaboration.
Resumo:
von Alfred Feilchenfeld
Resumo:
Bern, Univ., Diss., 1906
Resumo:
bey Christoph Peter Francken
Resumo:
von Eugen Doctor
Resumo:
von Jakob Neubauer