Simulação e avaliação das tecnologias LTE e DSL como backhaul utilizando software OPNET

A crescente demanda por capacidade vem levando os padrões de comunicação sem-fio a prover suporte para a coexistência de macro e pico células. O backhaul, conexão entre a rede de acesso e o núcleo da rede, é de grande interesse neste contexto devido aos diversos desafios técnicos e financeiros envolvidos ao tentar satisfazer o crescente tráfego dos usuários. Fibra óptica e micro-ondas com linha de visada são as opções mais amplamente adotadas para o backhaul de macro-células. Contudo, em muitas situações de interesse prático, estas não são factíveis devido aos altos custos e logística envolvidos. Este trabalho avalia o backhaul de pico-células, focando primeiramente na utilização de cobre como backhaul. O simulador OPNET foi utilizado para avaliar os requerimentos de backhaul para redes móveis em cenários específicos considerando garantir qualidade de serviço para os diversos tipos de tráfego envolvidos. Assumindo demandas de tráfego para LTE e LTE-Advanced, as tecnologias VDSL2 e G.fast são avaliadas e os resultados mostram que mesmo com uma grande demanda de aplicações de vídeo de alta definição, estas tecnologias podem acomodar o tráfego no backhaul de pico-células. VDSL2 é capaz de prover as taxas requeridas para cenários de pico-células LTE, mas não é capaz de acomodar tráfego LTE-Advanced típico. Por outro lado, considerando as taxas atingidas com a tecnologia G.fast, o tráfego backhaul para pico-células LTE-Advanced pode ainda ser entregue com garantias de qualidade de serviço. Neste trabalho também é proposta uma solução para simulação de cenários contendo redes de acesso heterogêneas considerando backhaul LTE sem linha de visada. São demonstrados também os resultados de simulações no OPNET com o backhaul LTE proposto para validar a solução proposta como capaz de caracterizar o tráfego de ambas as tecnologias WiFi e LTE na rede de acesso de acordo com o tipo de serviço.

Scheduler-dependent inter-cell interference and its impact on LTE uplink performance at flow level

The Long Term Evolution (LTE) cellular technology is expected to extend the capacity and improve the performance of current 3G cellular networks. Among the key mechanisms in LTE responsible for traffic management is the packet scheduler, which handles the allocation of resources to active flows in both the frequency and time dimension. This paper investigates for various scheduling scheme how they affect the inter-cell interference characteristics and how the interference in turn affects the user’s performance. A special focus in the analysis is on the impact of flow-level dynamics resulting from the random user behaviour. For this we use a hybrid analytical/simulation approach which enables fast evaluation of flow-level performance measures. Most interestingly, our findings show that the scheduling policy significantly affects the inter-cell interference pattern but that the scheduler specific pattern has little impact on the flow-level performance.

LTE uplink scheduling - flow level analysis

Long Term Evolution (LTE) is a cellular technology foreseen to extend the capacity and improve the performance of current 3G cellular networks. A key mechanism in the LTE traffic handling is the packet scheduler, which is in charge of allocating resources to active flows in both the frequency and time dimension. In this paper we present a performance comparison of three distinct scheduling schemes for LTE uplink with main focus on the impact of flow-level dynamics resulting from the random user behaviour. We apply a combined analytical/simulation approach which enables fast evaluation of flow-level performance measures. The results show that by considering flow-level dynamics we are able to observe performance trends that would otherwise stay hidden if only packet-level analysis is performed.

Mobility and bandwidth prediction in virtualized LTE systems: Architecture and challenges

Long Term Evolution (LTE) represents the fourth generation (4G) technology which is capable of providing high data rates as well as support of high speed mobility. The EU FP7 Mobile Cloud Networking (MCN) project integrates the use of cloud computing concepts in LTE mobile networks in order to increase LTE's performance. In this way a shared distributed virtualized LTE mobile network is built that can optimize the utilization of virtualized computing, storage and network resources and minimize communication delays. Two important features that can be used in such a virtualized system to improve its performance are the user mobility and bandwidth prediction. This paper introduces the architecture and challenges that are associated with user mobility and bandwidth prediction approaches in virtualized LTE systems.

WiMAX,Technology and Market.

Wireless communication is the transfer of information from one place to another without using wires. From the earliest times, humans have felt the need to develop techniques of remote communication. From this need arose the smoke signals, communication by sun reflection in mirrors and so on. But today the telecommunications electronic devices such as telephone, television, radio or computer. Radio and television are used for one-way communication. Telephone and computer are used for two-way communication. In wireless networks there is almost unlimited mobility, we can access the network almost anywhere or anytime. In wired networks we have the restriction of using the services in fixed area services. The demand of the wireless is increasing very fast; everybody wants broadband services anywhere anytime. WiMAX (Worldwide Interoperability for Microwave Access) is a broadband wireless technology based on IEEE 802.16-2004 and IEEE 802.16e-2005 that appears to solve this demand. WIMAX is a system that allows wireless data transmission in areas of up to 48 km of radius. It is designed as a wireless alternative to ADSL and a way to connect nodes in wireless metropolitan areas network. Unlike wireless systems that are limited in most cases, about 100 meter, providing greater coverage and more bandwidth. WIMAX promises to achieve high data transmission rates over large areas with a great amount of users. This alternative to the networks of broadband access common as DSL o Wi-Fi, can give broadband access to places quickly to rural areas and developing areas around the world. This paper is a study of WIMAX technology and market situation. First, the paper is responsible for explaining the technical aspects of WIMAX. For this gives an overview of WIMAX standards, physical layer, MAC layer and WiMAX, Technology and Market Beijing University of Post and Telecommunications 2 WIMAX network architecture. Second, the paper address the issue of market in which provides an overview of development and deployment of WIMAX to end the future development trend of WIMAX is addressed. RESUMEN: Por comunicaciones inalámbricas se entiende la transferencia de información desde un lugar a otro sin la necesidad de un soporte físico como es por ejemplo el cable. Por lo que remontándose a los principios de la existencia del ser humano, nos damos cuenta de que el ser humano siempre ha sentido la necesidad de desarrollar técnicas para lograr comunicarse a distancia con sus semejantes. De dicha necesidad, surgieron técnicas tan ancestrales como puede ser la comunicación mediante señales de humo o por reflexión de los rayos solares en espejos entre otras. La curiosidad del ser humano y la necesidad de comunicarse a distancia fue la que llevó a Alexander Graham Bell a inventar el teléfono en 1876. La aparición de un dispositivo que permitía comunicarse a distancia permitiendo escuchar la voz de aquella persona con la que se quería hablar, supuso una revolución no solo en el panorama tecnológico, si no también en el panorama social. Pues a parte de permitir comunicaciones a larga distancia, solventó el problema de la comunicación en “tiempo real”. A raíz de este invento, la tecnología en materia de comunicación ha ido avanzando significativamente, más concretamente en lo referido a las comunicaciones inalámbricas. En 1973 se realizó la primera llamada desde un terminal móvil aunque no fue hasta 1983 cuando se empezó a comercializar dicho terminal, lo que supuso un cambio de hábitos y costumbres para la sociedad. Desde la aparición del primer móvil el crecimiento del mercado ha sido exponencial, lo que ha repercutido en una demanda impensable de nuevas aplicaciones integradas en dichos dispositivos móviles que satisfagan las necesidades que día a día autogenera la sociedad. Tras conseguir realizar llamadas a larga distancia de forma inalámbrica, el siguiente paso fue la creación de los SMS (Short Message System) lo que supuso una nueva revolución además de abaratar costes al usuario a la hora de comunicarse. Pero el gran reto para la industria de las comunicaciones móviles surgió con la aparición de internet. Todo el mundo sentía la necesidad de poder conectarse a esa gran base de datos que es internet en cualquier parte y en cualquier momento. Las primeras conexiones a internet desde dispositivos móviles se realizaron a través de la tecnología WAP (Wireless Application Protocol) hasta la aparición de la tecnología GPRS que permitía la conexión mediante protocolo TCP/IP. A partir de estas conexiones han surgido otras tecnologías, como EDGE, HSDPA, etc., que permitían y permiten la conexión a internet desde dispositivos móviles. Hoy en día la demanda de servicios de red inalámbrica crece de forma rápida y exponencial, todo el mundo quiere servicios de banda ancha en cualquier lugar y en cualquier momento. En este documento se analiza la tecnología WiMAX ( Worldwide Interoperability for Microwave Access) que es una tecnología de banda ancha basada en el estándar IEEE 802.16 creada para brindar servicios a la demanda emergente en la banda ancha desde un punto de vista tecnológico, donde se da una visión de la parte técnica de la tecnología; y desde el punto de vista del mercado, donde se analiza el despliegue y desarrollo de la tecnología desde el punto de vista de negocio. WiMAX es una tecnología que permite la transmisión inalámbrica de datos en áreas de hasta 48Km de radio y que está diseñada como alternativa inalámbrica para ADSL y para conectar nodos de red inalámbrica en áreas metropolitanas. A diferencia de los sistemas inalámbricos existentes que están limitados en su mayoría a unos cientos de metros, WiMAX ofrece una mayor cobertura y un mayor ancho de banda que permita dar soporte a nuevas aplicaciones, además de alcanzar altas tasas de transmisión de datos en grandes áreas con una gran cantidad de usuarios. Se trata de una alternativa a las redes de acceso de banda ancha como DSL o Wi-Fi, que puede dar acceso de banda ancha a lugares tales como zonas rurales o zonas en vías de desarrollo por todo el mundo con rapidez. Existen dos tecnologías de WiMAX, WiMAX fijo (basado en el estándar IEEE 802.16d-2004) y WiMAX móvil (basado en el estándar IEEE 802.16e-2005). La tecnología fija está diseñada para comunicaciones punto a multipunto, mientras que la fija lo está para comunicaciones multipunto a multipunto. WiMAX móvil se basa en la tecnología OFDM que ofrece ventajas en términos de latencia, eficiencia en el uso del espectro y soporte avanzado para antenas. La modulación OFDM es muy robusta frente al multitrayecto, que es muy habitual en los canales de radiodifusión, frente al desvanecimiento debido a las condiciones meteorológicas y frente a las interferencias de RF. Una vez creada la tecnología WiMAX, poseedora de las características idóneas para solventar la demanda del mercado, ha de darse el siguiente paso, hay que convencer a la industria de las telecomunicaciones de que dicha tecnología realmente es la solución para que apoyen su implantación en el mercado de la banda ancha para las redes inalámbricas. Es aquí donde entra en juego el estudio del mercado que se realiza en este documento. WiMAX se enfrenta a un mercado exigente en el que a parte de tener que dar soporte a la demanda técnica, ha de ofrecer una rentabilidad económica a la industria de las comunicaciones móviles y más concretamente a las operadoras móviles que son quienes dentro del sector de las telecomunicaciones finalmente han de confiar en la tecnología para dar soporte a sus usuarios ya que estos al fin y al cabo lo único que quieren es que su dispositivo móvil satisfaga sus necesidades independientemente de la tecnología que utilicen para tener acceso a la red inalámbrica de banda ancha. Quizás el mayor problema al que se ha enfrentado WiMAX haya sido la situación económica en la que se encuentra el mundo. WiMAX a comenzado su andadura en uno de los peores momentos, pero aun así se presenta como una tecnología capaz de ayudar al mundo a salir hacia delante en estos tiempos tan duros. Finalmente se analiza uno de los debates existentes hoy en día en el sector de las comunicaciones móviles, WiMAX vs. LTE. Como se puede observar en el documento realmente una tecnología no saldrá victoriosa frente a la otra, si no que ambas tecnologías podrán coexistir y trabajar de forma conjunta.

Estudio y desarrollo sobre sistemas de simulación para comunicaciones móviles, LTE

Este proyecto, recoge el estudio de diferentes simuladores sobre comunicaciones móviles, que se encargan de analizar el comportamiento de las tecnologías UMTS (Universal Mobile Telecommunications System), 3G y LTE (Long Term Evolution),3.9G, centrándose principalmente en el caso de los simuladores LTE, ya que es la tecnología que se está implantando en la actualidad. Por ello, antes de analizar las características de la interfaz radio más importante de esta generación, la 3.9G, se hará una overview general de cómo han ido evolucionando las comunicaciones móviles a lo largo de la historia, se analizarán las características de la tecnología móvil actual, la 3.9G, para posteriormente centrarse en un par de simuladores que demostrarán, mediante resultados gráficos, estas características. Hoy en día, el uso de estos simuladores es totalmente necesario, ya que las comunicaciones móviles, avanzan a un ritmo vertiginoso y es necesario por lo tanto conocer las prestaciones que pueden producir las diferentes tecnologías móviles utilizadas. Los simuladores utilizados por este proyecto, permiten analizar el comportamiento de varios escenarios, ya que existen diferentes tipos de simuladores, tanto a nivel de enlace como a nivel de sistema. Se mencionarán una serie de simuladores correspondientes a la tercera generación UMTS, pero los simuladores en cuestión que se estudiarán y analizarán con más profundidad en este proyecto fin de carrera son los simuladores “Link-Level” y “System-Level”, desarrollados por el “Institute of Communications and Radio-Frecuency Engineering” de la Universidad de Viena. Estos simuladores permiten realizar diferentes simulaciones, como analizar el comportamiento entre una estación base y un único usuario, para el caso de los simuladores a nivel de enlace, o bien analizar el comportamiento de toda una red en el caso de los simuladores a nivel de sistema. Con los resultados que se pueden obtener de ambos simuladores, se realizarán una serie de preguntas, basadas en la práctica realizada por el profesor de la universidad Politécnica de Madrid, Pedro García del Pino, tanto de tipo teóricas como de tipo prácticas, para comprobar que se han entendido los simuladores analizados. Finalmente se citarán las conclusiones que se obtiene de este proyecto, así como las líneas futuras de acción. PROJECT ABSTRACT This project includes the study of different simulators on mobile communications, which are responsible for analyzing the behavior of UMTS (Universal Mobile Telecommunications System), 3G and LTE (Long Term Evolution), 3.9G, mainly focusing on the case of LTE simulators because it is the technology that is being implemented today. Therefore, before analyzing the characteristics of the most important radio interface of this generation, 3.9G, there will give a general overview how the mobile communications have evolved throughout history, analyzing the characteristics of current mobile technology, the 3.9G, later focus on a pair of simulators that demonstrate through graphical results, these characteristics. Today, the use of these simulators is absolutely necessary, because mobile communications advance at a high rate, and it is necessary to know the features that can produce different mobile technologies that are used. The simulators used for this project, allow to analyze the behavior of several scenarios, as there are different types of simulators, both link and system level. It mentioned a number of simulators for the third generation UMTS, but the simulators in question to be studied and analyzed in this final project are the simulators "Link-Level" and "System-Level", developed by the "Institute of Communications and Radio-Frequency Engineering" at the University of Vienna. These simulators allow realize different simulations, analyze the behavior between a base station and a single user, in the case of the link-level simulators or analyze the performance of a network in the case of system-level simulators. With the results that can be obtained from both simulators, will perform a series of questions, based on the practice developed by Pedro García del Pino, Professor of “Universidad Politécnica de Madrid (UPM)”. These questions will be both of a theoretical and practical type, to check that have been understood the analyzed simulators. Finally, it quotes the conclusions obtained from this project and mention the future lines of action.

Broadband access in complex environments: LTE on railway

This paper assesses the main challenges associated with the propagation and channel modeling of broadband radio systems in a complex environment of high speed and metropolitan railways. These challenges comprise practical simulation, modeling interferences, radio planning, test trials and performance evaluation in different railway scenarios using Long Term Evolution (LTE) as test case. This approach requires several steps; the first is the use of a radio propagation simulator based on ray-tracing techniques to accurately predict propagation. Besides the radio propagation simulator, a complete test bed has been constructed to assess LTE performance, channel propagation conditions and interference with other systems in real-world environments by means of standard-compliant LTE transmissions. Such measurement results allowed us to evaluate the propagation and performance of broadband signals and to test the suitability of LTE radio technology for complex railway scenarios.

Practical network coding for two way relay channels in LTE networks

In this paper, the implementation aspects and constraints of the simplest network coding (NC) schemes for a two-way relay channel (TWRC) composed of a user equipment (mobile terminal), an LTE relay station (RS) and an LTE base station (eNB) are considered in order to assess the usefulness of the NC in more realistic scenarios. The information exchange rate gain (IERG), the energy reduction gain (ERG) and the resource utilization gain (RUG) of the NC schemes with and without subcarrier division duplexing (SDD) are obtained by computer simulations. The usefulness of the NC schemes are evaluated for varying traffic load levels, the geographical distances between the nodes, the RS transmit powers, and the maximum numbers of retransmissions. Simulation results show that the NC schemes with and without SDD, have the throughput gains 0.5% and 25%, the ERGs 7 - 12% and 16 - 25%, and the RUGs 0.5 - 3.2%, respectively. It is found that the NC can provide performance gains also for the users at the cell edge. Furthermore, the ERGs of the NC increase with the transmit power of the relay while the ERGs of the NC remain the same even when the maximum number of retransmissions is reduced.

Nonlinear limit of alternative method to 2 × 2 MIMO for LTE RoF system

Owing to the limited cell size of eNodeB (eNB), the relay node has emerged as an attractive solution for the long-term evolution (LTE) system. The nonlinear limit of the alternative method to multipleinput and multiple-output (MIMO) based on frequency division multiplexing (FDM) for orthogonal FDM (OFDM) is analysed over varying transmission spans. In this reported work, it is shown that the degradation pattern over the linear, intermixing and nonlinear propagation regions is consistent for the 2 and the 2.6 GHz bands. The proposed bands experienced a linear increase in the error vector magnitude (EVM) for both the linear and the nonlinear regions proportional to the increasing transmission spans. In addition, an optical launch power between -2 and 2 dBm achieved a significantly lower EVM than the LTE limit of 8% for the 10-60 km spans. © The Institution of Engineering and Technology 2014.

Joint Power Amplifiers and I/Q Modulator Impairments Modelling and Compensation for LTE Transmitters Using Artificial Neural Networks

This work introduces joint power amplifier (PA) and I/Q modulator modelling and compensation for LongTerm Evolution (LTE) transmitters using artificial neural networks (ANNs). The proposed solution util-izes a powerful nonlinear autoregressive with exogenous inputs (NARX) ANN architecture, which yieldsnoticeable results for high peak to average power ratio (PAPR) LTE signals. Given the ANNs learning capa-bilities, this one-step solution, which includes the mitigation of both PA nonlinearity and I/Q modulatorimpairments, is both accurate and adaptable

LTE networking : extending the reach for sensors in mHealth applications

Sensor and electronic-health networks are widely utilized at home and in industry/research applications. In a local sense, a sensor-to-sensor network can have a range of a few meters to a couple of hundred meters (ZigBee Pro can extend this range up to 2000 m). With the deployment of mobile technology in the healthcare space (mobile-Health ‘m-Health’) and using cellular coverage, the range can virtually be unbounded. However, supporting bounded delay (end-to-end delay), class of service, and quality of service for critical sensor-mHealth applications may become challenging. This challenge can be alarmingly extended when thousands of users run their sensor-mHealth applications simultaneously and depend on limited coverage of the cell tower to transmit their health-related data across. In this paper we will discuss how the 3rd Generation Partnership Project–Long Term Evolution networks can address such aggregation issues, and discuss the challenges and provide recommendations.

Raman microscopy of formamide-intercalated kaolinites treated by controlled-rate thermal analysis technology

Raman spectroscopy of formamide-intercalated kaolinites treated using controlled-rate thermal analysis technology (CRTA), allowing the separation of adsorbed formamide from intercalated formamide in formamide-intercalated kaolinites, is reported. The Raman spectra of the CRTA-treated formamide-intercalated kaolinites are significantly different from those of the intercalated kaolinites, which display a combination of both intercalated and adsorbed formamide. An intense band is observed at 3629 cm-1, attributed to the inner surface hydroxyls hydrogen bonded to the formamide. Broad bands are observed at 3600 and 3639 cm-1, assigned to the inner surface hydroxyls, which are hydrogen bonded to the adsorbed water molecules. The hydroxyl-stretching band of the inner hydroxyl is observed at 3621 cm-1 in the Raman spectra of the CRTA-treated formamide-intercalated kaolinites. The results of thermal analysis show that the amount of intercalated formamide between the kaolinite layers is independent of the presence of water. Significant differences are observed in the CO stretching region between the adsorbed and intercalated formamide.