Studies on friction and formation of transfer layer when Al-4Mg alloy pins slid at various numbers of cycles on steel plates of different surface texture

In the present investigation, various kinds of textures, namely, unidirectional, 8-ground, and random were attained on the die surfaces. Roughness of the textures was varied using different grits of emery papers or polishing powders. Then pins made of Al-4Mg alloys were slid against steel plates at various numbers of cycles, namely 1, 2, 6, 10 and 20 under both dry and lubricated conditions using an inclined pin-on-plate sliding tester. The morphologies of the worn surfaces of the pins and the formation of transfer layer on the counter surfaces were observed using a scanning electron microscope. Surface roughness parameters of the plate were measured using an optical profilometer. It was observed that the coefficient of friction and formation of transfer layer during the first few cycles depend on the die surface textures under both dry and lubricated conditions. It was also observed that under lubricated condition, the coefficient of friction decreases with number of cycles for all kinds of textures. However, under dry condition, it ecreases for unidirectional and 8-ground surfaces while for random surfaces it increases with number of cycles

Multiplication of hybrid aspen (Populus tremula L. x P. tremuloides Michx.) from cuttings

The primary aim of the present study was to find an efficient and simple method of vegetative propagation for producing large numbers of hybrid aspen (Populus tremuloides L. x P. tremula Michx.) plants for forest plantations. The key objectives were to investigate the main physiological factors that affect the ability of cuttings to regenerate and to determine whether these factors could be manipulated by different growth conditions. In addition, clonal variation in traits related to propagation success was examined. According to our results, with the stem cutting method, depending on the clone, it is possible to obtain only 1−8 plants from one stock plant per year. With the root cutting method the corresponding values for two-year-old stock plants are 81−207 plants. The difference in number of cuttings between one- and two-year-old stock plants is so pronounced that it is economically feasible to grow stock plants for two years. There is no reason to use much older stock plants as a source of cuttings, as it has been observed that rooting ability diminishes as root diameter increases. Clonal variation is the most important individual factor in propagation of hybrid aspen. The fact that the efficiently sprouted clones also rooted best facilitates the selection of clones for large-scale propagation. In practice, root cuttings taken from all parts of the root system of hybrid aspen were capable of producing new shoots and roots. However, for efficient rooting it is important to use roots smaller than one centimeter in diameter. Both rooting and sprouting, as well as sprouting rate, were increased by high soil temperature; in our studies the highest temperature tested (30ºC) was the best. Light accelerated the sprouting of root cuttings, but they rooted best in dark conditions. Rooting is essential because without roots the sprouted cutting cannot survive long. For aspen the criteria for clone selection are primarily fiber qualities and growth rate, but ability to regenerate efficiently is also essential. For large-scale propagation it is very important to find clones from which many cuttings per stock plant can be obtained. In light of production costs, however, it is even more important that the regeneration ability of the produced cuttings be high.

Boronia heterophylla vase life is influenced more by ethylene than by bacterial numbers or vase solution pH

Bacterial proliferation in both vase solutions and in cut flower stems has been implicated in reducing the vase life of numerous genera. Boronia heterophylla F. Muell. (Red Boronia) vase life was assessed at two stages of floral maturity for nine vase solution treatments covering a pH range of 2.5-5.7. Vase life for advanced harvest maturity stems ranged from 4.2 d in 10 mM citric acid + 50 mg L-1 chlorine (pH 2.5) to 12.9 d after STS pulsing (pH 5.7). For normal harvest maturity stems, the corresponding range was 5.8-19.0 d, respectively. Vase solutions containing 50 mg L-1 chlorine biocide resulted in decreased longevity. In contrast, pulsing with the ethylene-binding inhibitor, STS, significantly increased vase life. The number of bacteria in the vase solutions after 11 d was determined in stems of advanced maturity. The solution with the greatest number of bacteria, 4.0 x 10(10) cfu mL(-1), was water used after STS pulsing and in which the flowers lasted longest. Vase solution bacteria were enumerated on days 0,3, 6, 9 and 12 of the vase period with stems of normal harvest maturity. There was no relationship between vase life and vase solution bacterial numbers ((R) over bar (2) = 0.000). Moreover, there was a negative relationship between numbers of bacteria in basal 0-5 cm stem segments and vase life. As no correlations were evident between longevity and either the pH or vase solution bacterial numbers, B. heterophylla vase life was evidently limited principally by ethylene action. (C) 2013 Elsevier B.V. All rights reserved.

The Formation, Numbers And Radio Output Of Giant Radio Galaxies

The numbers and mean radio luminosities of giant radio galaxies (GRGs) have been calculated for redshifts up to z = 0.6, assuming a sensitivity limit of 1 Jy at 1 GHz for the observations. The estimates are obtained with a model for the beam propagation, first through the hot gaseaous halo around the parent galaxy, and thereafter, through the even hotter but less dense intergalactic medium. The model is able to accurately reproduce the observed numbers and mean radio luminosities of GRGs at redshifts of less than 0.1, and it predicts that a somewhat larger number of GRGs should be found at redshifts of greater than 0.1.

Tribological response of soft materials sliding against hard surface textures at various numbers of cycles

In the present investigation, various kinds of textures were attained on the steel surfaces. Roughness of the textures was varied using different grits of emery papers or polishing powders. Pins made of pure Al, Al-4Mg alloy and pure Mg were then slid against prepared steel plate surfaces at various numbers of cycles using an inclined pin-on-plate sliding tester. Tests were conducted at a sliding velocity of 2mms(-1) in ambient conditions under both dry and lubricated conditions. Normal loads were increased up to 110N during the tests. The morphologies of the worn surfaces of the pins and the formation of transfer layer on the counter surfaces were observed using a scanning electron microscope. Surface roughness parameters of the plate were measured using an optical profilometer. In the experiments, it was observed that the coefficient of friction and formation of a transfer layer (under dry and lubricated conditions) only depended on surface texture during the first few sliding cycles. The steady-state variation in the coefficient of friction under both dry and lubrication conditions was attributed to the self-organisation of texture of the surfaces at the interface during sliding. Copyright (C) 2012 John Wiley & Sons, Ltd.

“Deborah Numbers”, Coupling Multiple Space and Time Scales and Governing Damage Evolution to Failure

Two different spatial levels are involved concerning damage accumulation to eventual failure. nucleation and growth rates of microdamage nN* and V*. It is found that the trans-scale length ratio c*/L does not directly affect the process. Instead, two independent dimensionless numbers: the trans-scale one * * ( V*)including the * **5 * N c V including mesoscopic parameters only, play the key role in the process of damage accumulation to failure. The above implies that there are three time scales involved in the process: the macroscopic imposed time scale tim = /a and two meso-scopic time scales, nucleation and growth of damage, (* *4) N N t =1 n c and tV=c*/V*. Clearly, the dimensionless number De*=tV/tim refers to the ratio of microdamage growth time scale over the macroscopically imposed time scale. So, analogous to the definition of Deborah number as the ratio of relaxation time over external one in rheology. Let De be the imposed Deborah number while De represents the competition and coupling between the microdamage growth and the macroscopically imposed wave loading. In stress-wave induced tensile failure (spallation) De* < 1, this means that microdamage has enough time to grow during the macroscopic wave loading. Thus, the microdamage growth appears to be the predominate mechanism governing the failure. Moreover, the dimensionless number D* = tV/tN characterizes the ratio of two intrinsic mesoscopic time scales: growth over nucleation. Similarly let D be the “intrinsic Deborah number”. Both time scales are relevant to intrinsic relaxation rather than imposed one. Furthermore, the intrinsic Deborah number D* implies a certain characteristic damage. In particular, it is derived that D* is a proper indicator of macroscopic critical damage to damage localization, like D* ∼ (10–3~10–2) in spallation. More importantly, we found that this small intrinsic Deborah number D* indicates the energy partition of microdamage dissipation over bulk plastic work. This explains why spallation can not be formulated by macroscopic energy criterion and must be treated by multi-scale analysis.

Angular distribution and conversion of multi-keV L-shell X-ray sources produced from nanosecond laser irradiated thick-foil targets

An experimental study on the angular distribution and conversion of multi-keV X-ray sources produced from 2 ns-duration 527nm laser irradiated thick-foil targets on Shenguang II laser facility (SG-II) is reported. The angular distributions measured in front of the targets can be fitted with the function of f(theta) = alpha+ (1- alpha)cos(beta) theta (theta is the viewing angle relative to the target normal), where alpha = 0.41 +/- 0.014, beta = 0.77 +/- 0.04 for Ti K-shell X-ray Sources (similar to 4.75 keV for Ti K-shell), and alpha = 0.085 +/- 0.06, beta = 0.59 +/- 0.07 for Ag/Pd/Mo L-shell X-ray Sources (2-2.8 keV for Mo L-shell, 2.8-3.5 keV for Pd L-shell, and 3-3.8 keV for Ag L-shell). The isotropy of the angular-distribution of L-shell emission is worse than that of the K-shell emission at larger viewing angle (>70 degrees), due to its larger optical depth (stronger self-absorption) in the cold plasma side lobe Surrounding the central emission region, and in the central hot plasma region (emission region). There is no observable difference in the angular distributions of the L-shell X-ray emission among Ag, Pd, and Mo. The conversion efficiency of Ag/Pd/Mo L-shell X-ray sources is higher than that of the Ti K-shell X-ray sources, but the gain relative to the K-shell emission is not as high as that by using short pulse lasers. The conversion efficiency of the L-shell X-ray sources decrease, with increasing atomic numbers (or X-ray photon energy), similar to the behavior of the K-shell X-ray Source.

Baryon and lepton numbers in particle physics beyond the standard model

The works presented in this thesis explore a variety of extensions of the standard model of particle physics which are motivated by baryon number (B) and lepton number (L), or some combination thereof. In the standard model, both baryon number and lepton number are accidental global symmetries violated only by non-perturbative weak effects, though the combination B-L is exactly conserved. Although there is currently no evidence for considering these symmetries as fundamental, there are strong phenomenological bounds restricting the existence of new physics violating B or L. In particular, there are strict limits on the lifetime of the proton whose decay would violate baryon number by one unit and lepton number by an odd number of units.

The first paper included in this thesis explores some of the simplest possible extensions of the standard model in which baryon number is violated, but the proton does not decay as a result. The second paper extends this analysis to explore models in which baryon number is conserved, but lepton flavor violation is present. Special attention is given to the processes of μ to e conversion and μ → eγ which are bound by existing experimental limits and relevant to future experiments.

The final two papers explore extensions of the minimal supersymmetric standard model (MSSM) in which both baryon number and lepton number, or the combination B-L, are elevated to the status of being spontaneously broken local symmetries. These models have a rich phenomenology including new collider signatures, stable dark matter candidates, and alternatives to the discrete R-parity symmetry usually built into the MSSM in order to protect against baryon and lepton number violating processes.

Participação do L-NAME, da L-arginina e da N-acetilcisteína no enfisema pulmonar induzido por fumaça de cigarro em camundongos

O óxido nítrico (NO) constitui um dos mais importantes mediadores intra e extracelulares e tem sido descrita sua participação tanto em processos biológicos como patológicos. Nosso objetivo foi verificar se o aumento ou a diminuição do óxido nítrico apresenta um efeito benéfico na proteção do tecido pulmonar no enfisema pulmonar induzido por fumaça de cigarro em camundongos. Para tanto, utilizamos o L-NAME (inibidor do NO), a L-arginina (substrato para a formação do NO) e os comparamos com a N-acetilcisteína (utilizada no tratamento da DPOC). Foram utilizados 65 camundongos C57BL/6 machos. Cinquenta animais foram divididos em grupos controle, fumaça de cigarro (FC), fumaça de cigarro + L-NAME (FC+LN), fumaça de cigarro + L-arginina (FC+LA), fumaça de cigarro + N-acetilcisteína (FC+NAC) (n=10, por grupo). Durante sessenta dias 40 animais foram expostos a 12 cigarros comerciais por dia, 3 vezes ao dia. Os grupos controle e FC foram submetidos à gavagens orogástricas com o veículo. Os grupos FC+LN, FC+LA, FC+NAC receberam gavagens diárias de L-NAME (60 mg/kg), L-arginina (120 mg/kg) ou NAC (200 mg/kg) respectivamente. Quinze animais (n = 5, por grupo) foram expostos ao ar ambiente e tratados apenas com L-NAME, L-arginina e NAC. Realizamos a análise do perfil das células do lavado broncoalveolar após o sacrifício. O pulmão direito foi removido para as análises histológicas do alargamento dos espaços aéreos determinado pela medida do diâmetro alveolar médio (Lm) e da densidade de superfície (Sv) dos septos alveolares. Os pulmões esquerdos foram removidos e homogeneizados para a as análises da atividade enzimática (SOD, CAT e MPO) e do sistema glutationa (GSH/GSSG), para a análise dos valores de nitrito e da expressão de 4-HNE, MMP-12, NE, TIMP-1, TIMP-2. Nossos resultados apontam que o L-NAME tem uma ação voltada para a matriz extracelular (via protease-antiprotease), enquanto que a L-arginina possui uma ação voltada para os oxidantes, assim como a NAC. Porém a NAC atua aumentando os níveis de glutationa, o que interfere diretamente nos oxidantes (via oxidante-antioxidante), enquanto a L-arginina interfere aumentando o burden oxidativo concomitante a um aumento da velocidade de ação dos oxidantes o que aumenta as células inflamatórias, mas diminui seu tempo de ação permitindo uma maior proteção. Concluímos que tanto o favorecimento para a produção e liberação do NOatravés da administração da L-arginina quanto a inibição do NOpela utilização do L-NAME foi eficiente na proteção do pulmão, apesar de não terem alcançado um resultado tão bom quanto a NAC.

On the link Floer homology of L-space links

We will prove that, for a 2 or 3 component L-space link, HFL^- is completely determined by the multi-variable Alexander polynomial of all the sub-links of L, as well as the pairwise linking numbers of all the components of L. We will also give some restrictions on the multi-variable Alexander polynomial of an L-space link. Finally, we use the methods in this paper to prove a conjecture of Yajing Liu classifying all 2-bridge L-space links.

Activity of perch, Perca fluviatilis L. in relation to water temperature [Translation from: Kalamies 1973(6) 4.]

Catchability and activity of Perca fluviatilis in relation to temperature is examined. The number of fish caught and water temperature during the 3 summer months was used the assess the numbers of hours of activity of perch. Parallel to the research on activity, large-scale marking was carried out to establish the periods of growth during the year.

Changes in feeding biology of Nile tilapia, Oreochromis niloticus (L.), after invasion of water hyacinth, Eichhornia crassipes (Mart.) Solms, in Lake Victoria, Kenya

Oreochrimis niloticus (L.) was introduced to Lake victoria in the 1950s. It remained relatively uncommon in catches until 1965, when the numbers began to increase dramatically. It is now the third most important commercial fish species after the Nile perch, Lates niloticus (L.) and Rastrineobola argentea (Pellegrin). Oreochromis niloticus is considered a herbivore, feeding mostly on algae and plant material. The diet now appears to be more diversified , with insects, fish, algae and plant materials all being important food items. Fish smaller than 5 cm TL have a diverse diet but there is a decline in the importance of zooplankton, the preferred food item of small fish, as fish get larger. The shift in diet could be due to changes which have occurred in the lake. Water hyacinth, Eichhornia crassipes (Mart.) Solms, which harbours numerous insects in its root balls, now has extensively coverage over the lake. The native fish species which preyed on these insects (e.g. haplochromines) have largely been eliminated and O. niloticus could be filling niches previously occupied by these cichlids and non cichlid fishes. The change in diet could also be related to food availability and abundance where the fish is feeding on the most readily available food items.

Review of NRA tracking projects on salmon, Salmo salar L., and sea trout, Salmo trutta L

The report briefly outlines the programme of the National Rivers Authority (NRA), placing the Fisheries programme in the context of the work of the NRA as a whole, and viewing the tracking work against the broader requirements of the NRA Fisheries research programme. All regions of England and Wales are considered. Two techniques currently exist for studying the detailed timing and extent of movements of adult salmon: tracking of individually identifiable fish, and counting the numbers of fish moving past a fixed point in the river. The development of tracking techniques and the integrated use of tracking and fish counters is briefly reviewed in Section 3. Further details of these techniques are given in Appendices. Section 4 summarises and assesses completed and current NRA tracking studies. Section 5 discusses the scientific content of these studies in relation to similar work carried out elsewhere in the UK. The NRA programme of tracking studies is evaluated in Section 6. Section 7 discusses future fisheries projects and Section 8 details the future development of tracking techniques. Finally, recommendations arising out of this review are summarised in Section 9.

Efeito radioprotetor da L-Glutamina na parede da bexiga de ratos submetidos à irradiação pélvica

A radioterapia é frequentemente utilizada no tratamento de tumores da próstata, porém durante esse procedimento a bexiga sadia usualmente sofre efeitos colaterais. Através do uso de um modelo animal para irradiação pélvica, avaliamos se a suplementação nutricional com L-glutamina poderia prevenir possíveis danos na parede da bexiga, especialmente em suas camadas mais superficiais. Ratos Wistar adultos machos com idade entre 3 e 4 meses foram separados em grupos de 8 animais: grupo controle que não recebeu a irradiação; grupos somente irradiados que foram mortos 7 (R7) e 15 dias (R15) após a irradiação (dose única de 10 Gy na região pélvico-abdominal); grupos irradiados e suplementados com L-glutamina (0,65g/kg de peso por dia), que foram mortos 7 (RG7) ou 15 após a irradiação. Células e vasos sanguíneos da lâmina própria, bem como o urotélio, foram avaliados com métodos histológicos. No urotélio foram feitas análises da altura e densidade nuclear e na lâmina própria densidade celular, densidade vascular e o número de mastócitos. Os resultados mostraram que em R7, a altura e densidade nuclear do urotélio e a densidade celular da lâmina própria não foram alterados significativamente. Entretanto a densidade dos vasos sanguíneos foi reduzida em 48% (p<0,05) e essa alteração foi evitada pela glutamina (p <0,02). No grupo R15, a densidade celular do epitélio aumentou em 35% (p<0,02). A densidade celular da lâmina própria não apresentou diferença estatística entre os grupos. Os mastócitos na lâmina própria foram reduzidos em R7 e R15. Apesar de ainda reduzidos em RG7 em RG15 houve aumento no número desse tipo celular o que sugere uma ação positiva da glutamina. Células α-actina positivas na lâmina própria formam uma camada suburotelial e foram identificadas como miofibroblastos. A espessura dessa camada aumentou em R7, mas foi semelhante ao controle em RG7, enquanto alterações em R15 e RG15 foram menos evidentes. Esses resultados mostraram que a utilização da L-glutamina antes e após a radioterapia deve ser considerada para uso humano na proteção da bexiga contra os efeitos da radiação.

Nonisothermal crystallization behavior of the poly(ethylene glycol) block in poly(L-lactide)-poly(ethylene glycol) diblock copolymers: Effect of the poly(L-lactide) block length

The confined crystallization behavior, melting behavior, and nonisothermal crystallization kinetics of the poly(ethylene glycol) block (PEG) in poly(L-lactide)poly(ethylene glycol) (PLLA-PEG) diblock copolymers were investigated with wideangle X-ray diffraction and differential scanning calorimetry. The analysis showed that the nonisothermal crystallization behavior changed from fitting the Ozawa equation and the Avrami equation modified by Jeziorny to deviating from them with the molecular weight of the poly(L-lactide) (PLLA) block increasing. This resulted from the gradual strengthening of the confined effect, which was imposed by the crystallization of the PLLA block. The nucleation mechanism of the PEG block of PLLA15000-PEG5000 at a larger degree of supercooling was different from that of PLLA2500-PEG5000, PLLA5000-PEG5000, and PEG5000 (the numbers after PEG and PLLA denote the molecular weights of the PEG and PLLA blocks, respectively). They were homogeneous nucleation and heterogeneous nucleation, respectively.