Benzocaine loaded biodegradable poly-(D,L-lactide-co-glycolide) nanocapsules: factorial design and characterization

Local anesthetics are able to induce pain relief since they bind to the sodium channel of excitable membranes, blocking the influx of sodium ions and the propagation of the nervous impulse. Benzocaine (BZC) is a local anesthetic that presents limited application in topical formulations due to its low water-solubility. This study aimed to develop polymeric nanocapsules as a drug delivery system for the local anesthetic benzocaine (BZC). To do so, BZC loaded poly(D,L-lactide-co-glycolide) (PLGA) nanocapsules were prepared using the nanoprecipitation method and were characterized. The factorial experimental design was used to study the influence of four different independent variables oil response to nanocapsules drug loading. The physical characteristics of PLGA nanocapsules were evaluated by analyzing the particle size, the polydispersion index and the zeta potential, using a particle size analyzer. The results of the optimized formulation showed a size distribution with a polydispersity index of 0.12. an average diameter of 123 nm, zeta potential of -33.6 mV and a drug loading of more than 69%. The release profiles showed a significant difference in the release behavior for the pure drug in solution when compared with that containing benzocaine loaded PLGA nanocapsules. Thus, the prepared nonocapsules described here may be of clinical importance in both the processes of stabilization and delivery of benzocaine for pain treatment. (c) 2009 Elsevier B.V. All rights reserved.

Synthesis and vibrational spectra of bimetallic compounds of the type [(NH3)(L)ZnFe(CO)4] (L = bidentate amine

New compounds with the general formulae [(NH3)(L)ZnFE(CO4] (L = ethylenediamine, N-methylethylenediamine, N,N′-dimethylethylenediamine and 1,3-propanediamine) were prepared and studied by vibrational spectroscopy. The data suggest that they may be formulated as monomers with a trigonal bipyramidal configuration around the iron atom. © 1984.

Sintesi di nanoparticelle polimeriche basate su acido(D,L-lattico-co-glicolico) per applicazioni in nanomedicina

Questo lavoro di tesi rientra nel progetto europeo SaveMe, al quale partecipa il gruppo di ricerca del dipartimento di chimica organica nel quale ho svolto l’attività di tirocinio. Obiettivo finale di tale progetto è la sintesi di nanoparticelle a base di PLGA (acido poli(D,L-lattico-co-glicolico)) superficialmente funzionalizzate con biomolecole, per l’impiego nel trattamento e nella diagnosi del cancro al pancreas. L’obiettivo da raggiungere nel primo anno di ricerca per il mio gruppo era la sintesi delle nanoparticelle centrali (core nanosystems). Nel presente lavoro sono quindi riportati i metodi di sintesi di polimeri derivati da PLGA e suoi copolimeri con PEG (polietilenglicole) aventi vari gruppi funzionali terminali: acidi idrossamici, amminici e acidi carbossilici. I polimeri sintetizzati sono stati caratterizzati tramite test colorimetrici qualitativi, 1H-NMR, 13C-NMR, spettrometria IR e TGA. Sono state sintetizzate nanoparticelle polimeriche (PNPs), con le tecniche Oil/Water (O/W) e nanoprecipitazione (NP), basate sui polimeri ottenuti, aventi quindi funzioni acide, idrossamiche ed amminiche sulla superficie. Su queste PNPs è stato effettuata una decorazione superficiale con nanoparticelle metalliche di maghemite (CAN-Maghemite). Le nanoparticelle polimeriche sono state caratterizzate tramite DLS e delle PNPs decorate sono state ottenute immagini TEM. Sono riportati inoltre i test di viabilità cellulare delle nanoparticelle ottenute.

Na 1 Nachlass Max Horkheimer, 50 - Korrespondenzen u.a. an die Firma A. L. Stamm & Co (p. I 23, 190-421)

9 Briefe und Beilage zwischen Alfred Sohn-Rethel und Max Horkheimer, 1936-1940 sowie Briefwechsel mit Joan M. Levi; 6 Briefe zwischen Joan M. Levi und Max Horkheimer, 1940; 1 Brief von Max Horkheimer an Assistac Westcent, 25.06.1937; 1 Brief von John MacMurray an Walter Adams, 19.05.1937; 1 Brief von Walter Adams an Theodor W. Adorno, 01.06.1937; 2 Briefe zwischen Charles Somlo & Co und Max Horkheimer, 06.06.1939, 12.09.139; 1 Brief von Martin Sommerfeld an Max Horkheimer, 29.05.1934; 3 Briefe von Josef Sondek an Max Horkheimer, 1937, 1942; 3 Briefe zwischen Elsa Sontheimer, Max Sontheimer und Max Horkheimer, Februar 1940, 07.03.1940; 1 Drucksache von der The Southard School an Max Horkheimer; 1 Brief von der Soziologischen Verlagsanstalt an Gertrud Janosi, 20.07.1931; 9 Briefe zwsichen Maurice J. Speiser und Max Horkheimer, 1936-1948; 2 Briefe zwischen de Spengler und Max Horkheimer, 30.11.1936, 27.01.1937; 5 Briefe zwischen Sterling D. Spero und Max Horkheimer, 1936-1937; 1 Lebenslauf von Herbert Spielberg; 1 Brief und 2 Beilagen von René A. Spitz an Max Horkheimer, 23.06.1938; 2 Briefe von Elsa Spriesterbach an Max Horkheimer, Juli 1949; 1 Brief von Ida M. Stadie an Max Horkheimer, 21.05.1937; 20 Rechnungen von A. L. Stamm & Co an Max Horkheimer, 1938-1939; 1 Brief von Rose Horkheimer an A. L. Stamm und Co, 28.09.1938; 1 Betriebsanleitung und 1 Auslieferugnsschein für Max Horkheimer vom Standard Air Conditioning, 03.03.1936; 1 Brief von Max Horkheimer an Standard Air Conditioning, 28.03.1936; 5 Briefe zwischen Taylor Starck und Max Horkheimer, 1943; 8 Briefe zwischen Hans Staudinger und Max Horkheimer, 1937, 1943; 1 Briefauszug und Beilage von Paul Stefan, 1940 sowie Briefwechsel mit Samuel R. Wachtell; 1 Brief von Samuel R. Wachtell an Gertrude Blitz, 23.10.1940; 3 Briefe zwischen Leo Löwenthal und Samuel R. Wachtell, September 1940, 23.10.1940; 1 Brief von Loe Löwenthal an Hermann Kesten, 01.10.1940; 7 Briefe und Beilage zwischen George Stefansky und Max Horkheimer, 1939-1940; 2 Briefe zwischen dem Refugee Section of the American Friends Service Committee und Max Horkheimer, 16.05.1940, 28.05.1940; 3 Briefe zwischen dem Institute of International Education und Max Horkheimer, 09.04.1940, April 1940; 1 Brief von Max Horkheimer an Friess, 01.03.1940; 1 Brief vom Institute of Sociology Malvern und Max Horkheimer, 31.01.1940; 3 Briefe zwischen Stein und Max Horkheimer, 30.11.1934, 1936, 1937; 7 Briefe von Estell A. Stein an Max Horkheimer, 1929, 1937; 1 Brief von Franz Stein an Max Horkheimer; 1 Brief von Friedrich Pollock an Gertrude R. Stein, 22.03.1939; 1 Brief von Leo Stein an Max Horkheimer, 25.07.1944; 1 Brief von Max Horkheimer an Emilia Steinacher, 20.07.1937; 4 Briefe zwischen Friedrich Steinfeld und Max Horkheimer, 1941, 1945; 1 Brief und Beilage von Eugene G. Steinhof an Max Horkheimer; 3 Briefe zwischen Ernst Steinitz und Max Horkheimer, 25.04.1938, April 1938; 2 Briefe zwischen Theodor Steltzer und Eric E. Warburg, 07.03.1948; 4 Brief zwischen Hermine Sterler und Max Horkheimer, 11.09.1939, 1939, 1941; 4 Briefe zwischen Alfred K. Stern und Max Horkheimer, 1938, 1940 sowie 1 Brief und 1 Beilage von Max Gottschalk; 1 Brief von Max Gottschalk an Max Horkheimer; 2 Briefe und 1 Beilage zwischen Erich Stern und Max Horkheimer, 26.02.1937, 17.03.1937; 2 Briefe und Beilage von Eugene I. Stern an Max Horkheimer, 1938; 2 Briefe zwischen Joseph M. Weidberg und Max Horkheimer, 15.07.1938, 29.07.1938; 1 Brief von Max Horkheimer an das Cooperative Bureau for Teachers, 03.02.1938; 12 Briefe zwischen Günther Stern und Max Horkheimer, 1936, 1938 sowie Briefwechsel mit John Guggenheim Memorial Foundation; 3 Briefe und 1 Beilage zwischen der John Simon Guggenheim Memorial Foundation und Max Horkheimer, 1937; 1 Brief vom Social Research Quarterly an Max Horkheimer, 03.01.1937; 3 Briefe zwischen Hugo Stern und Max Horkheimer, 06.12.1937, Dezember 1937;

Longwell & Cummings' and R.L. Polk & Co's Logansport directory.

"Being a complete index to the residents of the city, also a classified business directory, gazetteer of Cass County."

R. L. Polk & Co.'s Clearfield directory.

Mode of access: Internet.

R. L. Polk & Co.'s ... Trow New York copartnership and corporation directory, boroughs of Manhattan and Bronx.

Mode of access: Internet.

Multifunctional bioactive glass scaffolds coated with layers of poly(d,l-lactide-co-glycolide) and poly(n-isopropylacrylamide-co-acrylic acid) microgels loaded with vancomycin

A new family of multifunctional scaffolds, incorporating selected biopolymer coatings on basic Bioglass® derived foams has been developed. The polymer coatings were investigated as carrier of vancomycin which is a suitable drug to impart antibiotic function to the scaffolds. It has been proved that coating with PLGA (poly(lactic-co-glycolic acid)) with dispersed vancomycin-loaded microgels provides a rapid delivery of drug to give antibacterial effects at the wound site and a further sustained release to aid mid to long-term healing. Furthermore, the microgels also improved the bioactivity of the scaffolds by acting as nucleation sites for the formation of HA crystals in simulated body fluid. © 2013 Elsevier B.V. All rights reserved.

Controlled synthesis and processing of a poly(L-lactide-co-ε-caprolactone) copolymer for biomedical use as an absorbable monofilament surgical suture

Poly(L-lactide-co-ε-caprolactone) 75:25% mol, P(LL-co-CL), was synthesized via bulk ring-opening polymerisation (ROP) using a novel tin(II)alkoxide initiator, [Sn(Oct)]2DEG, at 130oC for 48 hrs. The effectiveness of this initiator was compared withthe well-known conventional tin(II) octoateinitiator, Sn(Oct)2. The P(LL-co-CL) copolymersobtained were characterized using a combination of analytical technique including: nuclear magnetic resonance spectroscopy (NMR), differential scanning calorimetry (DSC), thermogravimetry (TG) and gel permeation chromatography (GPC). The P(LL-co-CL) was melt-spun into monofilament fibres of uniform diameter and smooth surface appearance. Modification of the matrix morphology was then built into the as-spun fibresvia a series of controlled off-line annealing and hot-drawing steps. © (2014) Trans Tech Publications, Switzerland.

Preparation of a poly(L-lactide-co-caprolactone) copolymer using a novel tin(II) alkoxide initiator and its fiber processing for potential use as an absorbable monofilament surgical suture

A poly(L-lactide-co-caprolactone) copolymer, P(LL-co-CL), of composition 75:25 mol% was synthesized via the bulk ring-opening copolymerization of L-lactide and ε-caprolactone using a novel bis[tin(II) monooctoate] diethylene glycol coordination-insertion initiator, OctSn-OCH2CH2OCH2CH2O-SnOct. The P(LL-co-CL) copolymer obtained was characterized by a combination of analytical techniques, namely nuclear magnetic resonance spectroscopy, gel permeation chromatography, dilute-solution viscometry, differential scanning calorimetry, and thermogravimetric analysis. For processing into a monofilament fiber, the copolymer was melt spun with minimal draw to give a largely amorphous and unoriented as-spun fiber. The fiber's oriented semicrystalline morphology, necessary to give the required balance of mechanical properties, was then developed via a sequence of controlled offline hot-drawing and annealing steps. Depending on the final draw ratio, the fibers obtained had tensile strengths in the region of 200–400 MPa.

Effects of 15d-PGJ(2)-loaded poly(D,L-lactide-co-glycolide) nanocapsules on inflammation

BACKGROUND and PURPOSEThe PPAR-gamma agonist 15d-PGJ(2) is a potent anti-inflammatory agent but only at high doses. To improve the efficiency of 15d-PGJ(2), we used poly(D,L-lactide-co-glycolide) nanocapsules to encapsulate it, and function as a drug carrier system. The effects of these loaded nanocapsules (15d-PGJ(2)-NC) on inflammation induced by different stimuli were compared with those of free 15d-PGJ(2).EXPERIMENTAL APPROACHMice were pretreated (s.c.) with either 15d-PGJ(2)-NC or unloaded 15d-PGJ(2) (3, 10 or 30 mu g center dot kg-1), before induction of an inflammatory response by i.p. injection of either endotoxin (LPS), carrageenan (Cg) or mBSA (immune response).KEY RESULTSThe 15d-PGJ(2)-NC complex did not display changes in physico-chemical parameters or drug association efficiency over time, and was stable for up to 60 days of storage. Neutrophil migration induced by i.p. administration of LPS, Cg or mBSA was inhibited by 15d-PGJ(2)-NC, but not by unloaded 15d-PGJ(2). In the Cg model, 15d-PGJ(2)-NC markedly inhibited serum levels of the pro-inflammatory cytokines TNF-alpha, IL-1 beta and IL-12p70. Importantly, 15d-PGJ(2)-NC released high amounts of 15d-PGJ(2), reaching a peak between 2 and 8 h after administration. 15d-PGJ(2) was detected in mouse serum after 24 h, indicating sustained release from the carrier. When the same concentration of unloaded 15d-PGJ(2) was administered, only small amounts of 15d-PGJ(2) were found in the serum after a few hours.CONCLUSIONS and IMPLICATIONSThe present findings clearly indicate the potential of the novel anti-inflammatory 15d-PGJ(2) carrier formulation, administered systemically. The formulation enables the use of a much smaller drug dose, and is significantly more effective compared with unloaded 15d-PGJ(2).

Mechanical and biological characterization of a porous poly-L-lactic acid-co-ε-caprolactone scaffold for tissue engineering

This article presents a method for making highly porous biodegradable scaffold that may ultimately be used for tissue engineering. Poly(L-lactic-co-1-caprolactone) acid (70:30) (PLCL) scaffold was produced using the solvent casting/leaching out method, which entails dissolving the polymer and adding a porogen that is then leached out by immersing the scaffold in distillated water. Tensile tests were performed for three types of scaffolds, namely pre-wetted, dried, and UV-irradiated scaffolds and their mechanical properties were measured. The prewetted PLCL scaffold possessed a modulus of elasticity 0.92+0.09 MPa, a tensile strength of 0.12+0.03 MPa and an ultimate strain of 23+5.3%. No significant differences in the modulus elasticity, tensile strength, nor ultimate strain were found between the pre-wetted, dried, and UV irradiated scaffolds. The PLCL scaffold was seeded by human fibroblasts in order to evaluate its biocompatibility by Alamar bluew assays. After 10 days of culture, the scaffolds showed good biocompatibility and allowed cell proliferation. However, the fibroblasts stayed essentially at the surface. This study shows the possibility to use the PLCL scaffold in dynamic mechanical conditions for tissue engineering

Electrospinning and crosslinking of low-molecular-weight poly(trimethylene carbonate-co-L-lactide) as an elastomeric scaffold for vascular engineering

The growth of suitable tissue to replace natural blood vessels requires a degradable scaffold material that is processable into porous structures with appropriate mechanical and cell growth properties. This study investigates the fabrication of degradable, crosslinkable prepolymers of l-lactide-co-trimethylene carbonate into porous scaffolds by electrospinning. After crosslinking by γ-radiation, dimensionally stable scaffolds were obtained with up to 56% trimethylene carbonate incorporation. The fibrous mats showed Young’s moduli closely matching human arteries (0.4–0.8 MPa). Repeated cyclic extension yielded negligible change in mechanical properties, demonstrating the potential for use under dynamic physiological conditions. The scaffolds remained elastic and resilient at 30% strain after 84 days of degradation in phosphate buffer, while the modulus and ultimate stress and strain progressively decreased. The electrospun mats are mechanically superior to solid films of the same materials. In vitro, human mesenchymal stem cells adhered to and readily proliferated on the three-dimensional fiber network, demonstrating that these polymers may find use in growing artificial blood vessels in vivo.

Avaliação da eficiência de co-transformação de soja (Glycine max (L.) Merrill) via bombardeamento de partículas utilizando um gene de seleção e um gene de interesse em plamídeos diferentes

Visando aumentar a resistência a moléstias fúngicas, o presente trabalho teve como objetivo introduzir um gene (chit1) que codifica uma quitinase do fungo Metarhizium anisopliae em cultivares de soja [Glycine max (L.) Merrill]. A co-transformação foi a estratégia escolhida, visando a obtenção de plantas livres de transgenes marcadores na progênie das plantas transformadas. A co-transformação foi realizada via biolística, tendo como tecido-alvo conjuntos de embriões somáticos globulares das cultivares MG/BR46 Conquista e IAS-5. O plasmídeo pGusHyg, que contém o gene repórter gusA e o gene marcador hpt, foi bombardeado concomitantemente com o plasmídeo pMOG463chit1, que porta o gene chit1. Os conjuntos de embriões bombardeados foram transferidos para meio seletivo contendo higromicina, visando a obtenção de material estavelmente transformado. Os conjuntos embriogênicos higromicina-resistentes foram transferidos seqüencialmente para meios de proliferação D-20 (sem higromicina), maturação e regeneração. No total, foram obtidos 387 e 380 embriões histodiferenciados das cultivares MG/BR46 Conquista e IAS-5, respectivamente. Plantas transgênicas adultas e férteis foram regeneradas. Para avaliar a eficiência da estratégia de cotransformação, foram realizadas análises moleculares de embriões histodiferenciados e de plantas regeneradas. Os resultados obtidos neste trabalho permitiram o cálculo da taxa de co-transformação de 44% para os embriões histodiferenciados da cultivar MG/BR46 Conquista e de 50% para plantas de IAS-5. Não existem, até o momento, relatos de trabalhos em soja utilizando embriões somáticos globulares em proliferação como alvo para estudos de co-transformação.

Carbodiimide-mediated synthesis of poly(L-lactide)-based networks

Poly(L-lactide-co-succinic anhydride) networks were synthesised via the carbodiimide-mediated coupling of poly(L-lactide) (PLLA) star polymers. When 4-(dimethylamino)pyridine (DMAP) alone was used as the catalyst gelation did not occur. However, when 4-(dimethylamino)pyridinium p-toluenesulfonate (DPTS), the salt of DMAP and p-toluenesulfonic acid (PTSA), was the catalyst, the networks obtained had gel fractions comparable to those which were reported for networks synthesised by conventional methods. Greater gel fractions and conversion of the prepolymer terminal hydroxyl groups were observed when the hydroxyl-terminated star prepolymers reacted with succinic anhydride in a one-pot procedure than when the hydroxyl-terminated star prepolymers reacted with presynthesised succinic-terminated star prepolymers. The thermal properties of the networks, glass transition temperature (Tg), melting temperature (Tm) and crystallinity (Xc) were all strongly influenced by the average molecular weights between the crosslinks ((M_c). The network with the smallest (M_c )(1400 g/mol) was amorphous and had a Tg of 59 °C while the network with the largest (M_c ) (7800 g/mol) was 15 % crystalline and had a Tg of 56 °C.