Thermodynamic models for water sorption by grape skin and pulp

The enthalpy-entropy compensation theory was applied to water sorption for grapes of Italy variety. The moisture sorption isotherms were analyzed using the static gravimetric method at 35, 40, 50, 60, 70 and 75 degrees C. For isotherms construction, the skin and pulp of the grape were used separately and it was possible to observe significant differences. The GAB equation was fitted to the experimental data, using direct nonlinear regression analysis; the agreement between experimental and calculated values was satisfactory. The net isosteric heat or enthalpy of water sorption, determined from the equilibrium sorption data, showed a different behavior when compared with other works, as it was obtained for skin and pulp separately. Plots of Delta h vs Delta S for skin and pulp provided the isokinetic temperatures T-Bs = 423.2 +/- 27.6 K and T-Bp = 424.5 +/- 25.3 K, respectively, indicating an enthalpy-controlled desorption process over the whole range of moisture content considered.

Sorption isotherms of alligator's meat (Caiman crocodilus yacare)

Sorption isotherms were determined for salted alligator's meat at four different temperatures (10degreesC, 15degreesC, 25degreesC and 35degreesC), using a standard gravimetric method. The goodness of fit of five sorption models to experimental data was determined. Five models, namely the GAB, the BET, the Halsey, the Henderson and the Hailwood and Horrobin, were evaluated to determine the best fit for the experimental data. The GAB was the best fitted model for the data of salted alligator's meat with an average error less than 10% for temperature of 10degreesC and less than 5% for the others temperatures. The coefficients of determination (r(2)) were 0.99 for all temperatures considered. The monolayer values decreased as temperature increased. The other four models were not appropriated to fit the data because of the high error values, although the r(2) were also similar to the GAB model. The net isosteric heat of sorption was estimated from equilibrium sorption data, using the Clausis-Clapeyron equation. Isosteric heats of sorption were found to increase with increasing temperature and could be well adjusted by an exponential relationship. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Water sorption thermodynamic properties applied to persimmon skin and pulp

Moisture equilibrium data of persimmon skin and pulp were determined using the static gravimetric method. Adsorption and desorption isotherms were obtained in the range of 20-70°C, to water activities (a w) from 0.02 to 0.85. The application of the GAB model to the experimental results, using direct nonlinear regression analysis, provided a good agreement between experimental and calculated values. The net isosteric heat of sorption was estimated from equilibrium sorption data, using the Clausius-Clapeyron equation. Isosteric heats of sorption were found to increase with increasing temperature and could be well adjusted by an exponential relationship. The enthalpy-entropy compensation theory was applied to sorption isotherms and plots of ΔH versus ΔS for skin and pulp provided the isokinetic temperatures, indicating an enthalpy controlled sorption process. © 2000 Elsevier Science B.V.

Efecto del método de secado en las propiedades termodinámicas de pulpa de mora en polvo

Three different types of maltodextrin encapsulated dehydrated blackberry fruit powders were obtained using vibrofluidized bed drying (VF), spray drying (SD), vacuum drying (VD), and freeze drying (FD). Moisture equilibrium data of blackberry pulp powders with 18% maltodextrin were determined at 20, 30, 40, and 50°C using the static gravimetric method for the water activity range of 0.06-0.90. Experimental equilibrium moisture content data versus water activity were fit to the Guggenheim-Anderson-de Boer (GAB) model. Agreement was found between experimental and calculated values. The isosteric heat of sorption of water was determined using the Clausius-Clapeyron equation from the equilibrium data; isosteric heats of sorption were found to increase with increasing temperature and could be adjusted by an exponential relationship. For freeze dried, vibrofluidized, and vacuum dried pulp powder samples, the isosteric heats of sorption were lower (more negative) than those calculated for spray dried samples. The enthalpy-entropy compensation theory was applied to sorption isotherms and plots of ΔH versus ΔS provided the isokinetic temperatures, indicating an enthalpy-controlled sorption process.

Modelling thermodynamic properties of banana waste by analytical derivation of desorption isotherms

Banana is an agricultural product of great economic importance for various developing countries. The relationship between moisture content and water activity provides useful information for the processing and storage of banana waste. The water activity and moisture content of three banana (Mussa spp. Haploid AAB cv. Nanica) waste items were analyzed to determine the desorption isotherms at six different temperatures (20, 30, 40, 50, 60 and 70°C). The desorption isotherms of the peel, pedicel and pulp of overripe bananas were determined in wide ranges of moisture content (0.001-6.360 kg kg-1 d.b.) and water activity (0.02-0.907). The theoretical GAB model was used for modelling the desorption isotherms. An analytical solution of the Clausius-Clapeyron equation was proposed to compute the isosteric heat of sorption, the differential entropy and Gibbs' free energy by way of the GAB model when the effect of temperature on the hygroscopic equilibrium was considered. © 2012 de Gruyter. All rights reserved.

Propriedades físico-químicas de abacate submetido à secagem convectiva e desidratação osmótica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aplicações de secagem para o aproveitamento de resíduos da banana, visando sua aplicação na indústria

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência de encapsulantes e do método de secagem nas propriedades físico-químicas e atributos de qualidade de polpa de maracujá (Passifora edulis f. flavicarpa)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caqui em pó: influência de aditivos e do método de secagem

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Comportamento higroscópico da farinha de pupunha (Bactris gasipaes)

Avaliou-se o comportamento higroscópico da farinha de pupunha obtida por secagem em estufa a 70°C. Obteve-se dados de equilíbrio de adsorção de umidade a 15°C e 35°C, através de um método estático, onde recipientes de 500mL, contendo soluções saturadas de sais, foram utilizados como ambientes geradores de umidades relativas constantes, na faixa de 11% a 97%, aos quais foram submetidas amostras do produto. A partir dos dados de equilíbrio foram construídas isotermas de adsorção de umidade, sendo observadas isotermas do tipo III e, ainda, que a umidade de equilíbrio diminui com o aumento da temperatura. Determinou-se o calor isostérico de adsorção para diferentes níveis de umidade de equilíbrio e a umidade equivalente à monocamada, observando-se valores inferiores a 5g H₂O/100 g s.s. Verificou-se a aplicabilidade do modelo GAB na predição de dados de equilíbrio do produto. De acordo com os resultados obtidos, a farinha de pupunha apresenta baixa higroscopicidade, ou seja, baixa afinidade por moléculas de água.

Physical, Thermal and Water-Sorption Properties of Passion Fruit Seeds

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comportamento higroscópico de partes aéreas de pimenta-de-macaco (Piper aduncum L.)

Isotermas de dessorção de pimenta-de-macaco foram determinadas pelo método gravimétrico estático nas temperaturas de 35, 45 e 55 ºC, com umidade relativa variando de 5,5-81%. Três modelos matemáticos foram aplicados para analisar os dados experimentais. O modelo de GAB modificado apresentou o melhor ajuste aos dados experimentais. O calor isostérico e a entropia diferencial foram determinados pela aplicação das equações de Clausius-Clapeyron e Gibbs-Helmholtz, respectivamente. O calor isostérico e a entropia da isoterma de dessorção apresentaram comportamento similar. A teoria da compensação entalpia-entropia foi aplicada às isotermas indicando que o mecanismo de dessorção de umidade das partes aéreas de pimenta-de-macaco é controlado pela entalpia.

Study of adsorption isotherms of green coconut pulp

Brazil is considered one of the largest producers and consumers of tropical fruits. Green coconut (Cocos nucifera L.) stands out not only for its production and consumption, but also for the high amount of waste produced by coconut water industry and in natura consumption. Therefore, there is a need for utilization of this by-product. This study aims to study the adsorption isotherms of green coconut pulp and determine its isosteric heat of sorption. The adsorption isotherms at temperatures of 30, 40, 50, 60, and 70 °C were analyzed, and they exhibit type III behavior, typical of sugar rich foods. The experimental results of equilibrium moisture content were correlated by models present in the literature. The Guggenheim, Anderson and De Boer (GAB) model proved particularly good overall agreement with the experimental data. The heat of sorption determined from the adsorption isotherms increased with the decrease in moisture content. The heat of sorption is considered as indicative of intermolecular attractive forces between the sorption sites and water vapor, which is an important factor to predict the shelf life of dried products.

Determinación de la higroscopicidad y comportamiento termodinámico de la madera juvenil y madura a través de sus isotermas de sorción

La respuesta higroscópica de la madera varía a lo largo de la dirección radial del árbol. El aumento de corta de ejemplares jóvenes y el uso de troncos de pequeños diámetros en la industria de los productos forestales, hacen preciso estudiar el comportamiento higroscópico tanto de la madera juvenil como de la madura. Su determinación proporciona información para comprender los mecanismos de sorción. Asimismo, la obtención de las propiedades termodinámicas de ambos tipos de madera facilita la modelización de procesos industriales como el secado o el encolado. En el presente trabajo, se ha comparado el comportamiento higroscópico y las propiedades termodinámicas de la madera juvenil y madura de Abies pinsapo Boissier, Abies alba Mill., Pinus canariensis C. Sm. ex DC., Pinus nigra Arnold, Pinus uncinata Mill. ex Mirb. y Pinus pinea L. Para este propósito se han utilizado las isotermas de sorción obtenidas mediante el método tradicional de sales saturadas descrito por COST Action E8 a 15, 35 y 50ºC en Abies pinsapo, Abies alba, Pinus nigra, Pinus uncinata y Pinus pinea, y a 35 y 50ºC en Pinus canariensis. Igualmente, se ha empleado el equipo dynamic vapor sorption (DVS) en la obtención de las isotermas de Pinus pinea a 35 y 50ºC. El ajuste de las curvas se ha realizado mediante el modelo Guggenheim, Anderson y de Boer-Dent (GAB), cumpliendo todas las muestras los criterios de aceptación establecidos. En el estudio de las isotermas se ha calculado el coeficiente y área de histéresis entre el proceso de adsorción y desorción para cada una de las muestras. Con el fin de comprender el comportamiento higroscópico experimentado por cada madera se ha determinado la composición química, espectros de infrarrojos (FTIR) y difractogramas de rayos X de cada una. Los parámetros termodinámicos - calor isostérico neto y total heat of wetting - se han obtenido a partir de las isotermas de sorción mediante el método de integración de la ecuación de Clausius-Clapeyron. Finalmente, se han comparado los datos obtenidos con el método tradicional de sales saturadas y con dynamic vapor sorption con el propósito de conocer la existencia de similitudes entre ambas metodologías. Los resultados mostraron que los puntos de equilibrio son, en la mayor parte de los casos, superiores en la madera madura frente a la juvenil, y por tanto las isotermas de la madera madura se encuentran siempre por encima de las de la juvenil, debido principalmente a la composición química. Respecto a las propiedades termodinámicas, se ha determinado que la energía involucrada en los procesos de sorción es superior en la madera madura que en la madera juvenil, siendo mayor en el proceso de desorción frente al de adsorción. En la comparación de las metodologías de sales saturadas y dynamic vapor sorption no se han detectado casi diferencias significativas en el proceso de adsorción, mientras que sí se han obtenido en el de desorción. ABSTRACT The hygroscopic response of wood varies throughout the radial direction of the tree. The longer cut of young trees and the use of small-diameter trunks in the forest product industry make it necessary to study the hygroscopic behaviour of both juvenile and mature wood. Determining this behaviour in both types of wood provides information for understanding the sorption mechanisms. Similarly, obtaining the thermodynamic properties of juvenile and mature wood facilitates modelling of industrial processes such as drying and bonding. In this study a comparison was made of the hygroscopic behaviour and thermodynamic properties of juvenile and mature wood of Abies pinsapo Boissier, Abies alba Mill., Pinus canariensis C. Sm. ex DC., Pinus nigra Arnold, Pinus uncinata Mill. ex Mirb. and Pinus pinea L. This was done by obtaining the sorption isotherms using the traditional saturated salt method described by COST Action E8 at 15, 35 and 50ºC in Abies pinsapo, Abies alba, Pinus nigra, Pinus uncinata and Pinus pinea, and at 35 and 50ºC in Pinus canariensis. In addition, dynamic vapour sorption (DVS) was used to obtain the isotherms of Pinus pinea at 35 and 50ºC. The curves were fitted using the Guggenheim, Anderson and de Boer- Dent (GAB) model and all samples met the established acceptance criteria. In the study of the isotherms, the hysteresis coefficient and area of the hysteresis loop between adsorption and desorption were calculated for each sample. To understand the hygroscopic behaviour of juvenile and mature wood, the chemical composition, infrared spectra (FTIR) and X-ray diffractograms of each type of wood were determined. The thermodynamic parameters - net isosteric heat and total heat of wetting - were obtained from the sorption isotherms by applying the integration method of the Clausius-Clapeyron equation. The data obtained using the traditional saturated salt method and with dynamic vapour sorption were compared to determine the similarities between the two methods. The results showed that the equilibrium points are greater in the mature wood than in the juvenile wood in most cases, and therefore the mature wood isotherms are always above the juvenile wood isotherms, mainly because of the chemical composition. As regards the thermodynamic properties, it was determined that the energy involved in the sorption processes is greater in the mature wood than in the juvenile wood, and is greater in the desorption process than in the adsorption process. On comparing the saturated salt and dynamic vapour sorption methods, almost no significant differences were detected in the adsorption process, but significant differences were obtained in the desorption process.

Clay-supported graphene materials: application to hydrogen storage

The present work refers to clay–graphene nanomaterials prepared by a green way using caramel from sucrose and two types of natural clays (montmorillonite and sepiolite) as precursors, with the aim of evaluating their potential use in hydrogen storage. The impregnation of the clay substrates by caramel in aqueous media, followed by a thermal treatment in the absence of oxygen of these clay–caramel intermediates gives rise to graphene-like materials, which remain strongly bound to the silicate support. The nature of the resulting materials was characterized by different techniques such as XRD, Raman spectroscopy and TEM, as well as by adsorption isotherms of N2, CO2 and H2O. These carbon–clay nanocomposites can act as adsorbents for hydrogen storage, achieving, at 298 K and 20 MPa, over 0.1 wt% of hydrogen adsorption excess related to the total mass of the system, and a maximum value close to 0.4 wt% of hydrogen specifically related to the carbon mass. The very high isosteric heat for hydrogen sorption determined from adsorption isotherms at different temperatures (14.5 kJ mol−1) fits well with the theoretical values available for hydrogen storage on materials that show a strong stabilization of the H2 molecule upon adsorption.