EXPERIMENTAL INVESTIGATION OF CERTAIN INTERNAL CONDENSING AND BOILING FLOWS: THEIR SENSITIVITY TO PRESSURE FLUCTUATIONS AND HEAT TRANSFER ENHANCEMENTS

Space-based (satellite, scientific probe, space station, etc.) and millimeter – to – microscale (such as are used in high power electronics cooling, weapons cooling in aircraft, etc.) condensers and boilers are shear/pressure driven. They are of increasing interest to system engineers for thermal management because flow boilers and flow condensers offer both high fluid flow-rate-specific heat transfer capacity and very low thermal resistance between the fluid and the heat exchange surface, so large amounts of heat may be removed using reasonably-sized devices without the need for excessive temperature differences. However, flow stability issues and degradation of performance of shear/pressure driven condensers and boilers due to non-desirable flow morphology over large portions of their lengths have mostly prevented their use in these applications. This research is part of an ongoing investigation seeking to close the gap between science and engineering by analyzing two key innovations which could help address these problems. First, it is recommended that the condenser and boiler be operated in an innovative flow configuration which provides a non-participating core vapor stream to stabilize the annular flow regime throughout the device length, accomplished in an energy-efficient manner by means of ducted vapor re-circulation. This is demonstrated experimentally. Second, suitable pulsations applied to the vapor entering the condenser or boiler (from the re-circulating vapor stream) greatly reduce the thermal resistance of the already effective annular flow regime. For experiments reported here, application of pulsations increased time-averaged heat-flux up to 900 % at a location within the flow condenser and up to 200 % at a location within the flow boiler, measured at the heat-exchange surface. Traditional fully condensing flows, reported here for comparison purposes, show similar heat-flux enhancements due to imposed pulsations over a range of frequencies. Shear/pressure driven condensing and boiling flow experiments are carried out in horizontal mm-scale channels with heat exchange through the bottom surface. The sides and top of the flow channel are insulated. The fluid is FC-72 from 3M Corporation.

Interconnector Investment for a Well-Functioning Internal Market: What EU regime of regulatory incentives? Bruges European Economic Research (BEER) Papers 18/October 2010

Sufficient cross‐border electricity transmission infrastructure is a pre‐requisite for a functioning European internal market for electricity. Also, the achievement of the EU’s energy policy objectives – sustainability, competitiveness and security of supply – critically depends on adequate investment in physical interconnections between the member states. Mainly focusing on the “regulatory path”, this paper assesses different ways to achieve a sufficient level of interconnector investment. In a first step, economic analysis identifies numerous impediments to interconnector investment adding up to an “interconnector investment failure”. Reflecting on the proper regulatory design of an EU framework able to overcome the interconnector investment failure, a number of recommendations are put forward:  All congestion rents should be channeled into interconnector building. Unused rents should be transferred to a European interconnector fund supervised by an EU agency.  Even though inherently sub‐optimal, merchant transmission investment can be used as a means to put pressure on regulated transmission system operators (TSO) that do not deliver. An EU agency should have exclusive competence on merchant interconnector exemptions.  A European TSO organization should be entrusted with supra‐national network planning, supervised by an EU agency.  The agency should decide on investment cost reallocation for interconnector projects that yield strong externalities. Payments could be settled via a European interconnector fund.  In case of non‐compliance with the supra‐national network plan, the EU agency should have the right to organize a tender – financed by the European interconnector fund – in order to get the “missing link” built. Assessing the existing EU regulatory framework, the efforts of the 2009 “third energy package” to fill the “regulatory gap” with new EU bodies – ACER and ENTSO‐E – are acknowledged. However, striking holes in regulatory framework are spotted, notably with regard to the use of congestion rents, interconnector cost allocation, and the distribution of decision making powers on new infrastructure exemptions A discussion of the TEN‐E interconnector funding scheme shows that massive funding can be an interim solution to the problem of insufficient interconnection capacities while overcoming the political deadlock on sensible regulatory topics such as interconnector cost allocation. The paper ends with policy recommendations.

Physical activity promotion in primary care: Bridging the gap between research and practice

Background: Aflifle a growing literature supports the effectiveness of physical activity interventions delivered in the primary care setting, few studies have evaluated efforts to increase physician counseling on physical activity during routine practice (i.e., outside the context of controlled research). This paper reports the results of a dissemination trial of a primary care-based physical activity counseling intervention conducted within the context of a larger, multi-strategy, Australian community-based, physical activity intervention, the 10,000 Steps Rockhampton Project. Methods: All 23 general practices and 66 general practitioners (GPs, the Australian equivalent of family physicians) were invited to participate. Practice visits were made to consenting practices during which instruction in brief physical activity counseling was offered, along with physical activity promotion resources (print materials and pedometers). The evaluation, guided by the RE-AIM framework, included collection of process data, as well as pre-and post-inteivention data from a mailed GP survey, and data from the larger project's random-digit-dialed, community-based, cross-sectional telephone survey that was conducted in Rockhampton and a comparison community, Results: Ninety-one percent of practices were visited by 10,000 Steps staff and agreed to participate, with 58% of GPs present during the visits. General practitioner survey response rates were 67% (n =44/66 at baseline) and 71% (n =37/52, at 14-month follow-up). At follow-up, 62% had displayed the poster, 81% were using the brochures, and 70% had loaned pedometers to patients, although the number loaned was relatively small. No change was seen in GP self-report of the percentage of patients counseled on physical activity. However, data from the telephone surveys showed a 31% increase in the likelihood of recalling GP advice on physical activity in Rockhampton (95% confidence interval [CI]=1.11-1.54) compared to a 16% decrease (95% CI=0.68-1.04) in the comparison community. Conclusions: This dissemination study achieved high rates of GP uptake, reasonable levels of implementation, and a significant increase in the number of community residents counseled on physical activity. These results suggest that evidence-based primary care physical activity counseling protocols can be translated into routine practice, although the initial and ongoing investment of time to develop partnerships with relevant healthcare organizations, and the interest generated by the overall 10,000 Steps program should not be underestimated. ((C) 2004 American journal of Preventive Medicine.

Colloidal dual-band gap cell for photocatalytic hydrogen generation

We report that the internal quantum efficiency for hydrogen generation in spherical, Pt-decorated CdS nanocrystals can be tuned by quantum confinement, resulting in higher efficiencies for smaller than for larger nanocrystals (17.3% for 2.8 nm and 11.4% for 4.6 nm diameter nanocrystals). We attribute this to a larger driving force for electron and hole transfer in the smaller nanocrystals. The larger internal quantum efficiency in smaller nanocrystals enables a novel colloidal dual-band gap cell utilising differently sized nanocrystals and showing larger external quantum efficiencies than cells with only one size of nanocrystals (9.4% for 2.8 nm particles only and 14.7% for 2.8 nm and 4.6 nm nanocrystals). This represents a proof-of-principle for future colloidal tandem cell.

Social-cognitive antecedents of ambidextrous orientation in family-owned startups: The role of family ties, achievement motivation, and internal locus of control

Regulatory Focus Theory predicts that the motivation to self-regulate goal-directed thought and behavior depends on two distinct regulation strategies: a promotion focus based on attaining gains and a prevention focus based on avoiding losses. This study took a social-cognitive approach predicting that regulatory focus has an impact on how family startups (several family related founders) explore "new ideas", exploit "old certainties" and achieve the balance of both (ambidexterity), compared to lone founder startups (only one founder present). It was proposed that the social context of family ties among founders leads them to a prevention focus concerned with avoiding the loss of the socio-emotional benefits of those ties. In order to avoid such a loss, family founders were expected to increase their risk perceptions and thus, explore less than lone founders, who lack such socio-emotional ties. It was also proposed that two commonly used psychological traits in entrepreneurship research —achievement motivation and internal locus of control, predispose entrepreneurs to a promotion focus. Founders with a promotion focus, in turn, were hypothesized to lead startups to more risk-seeking behaviors and to more explorative orientation. The previous argument was used as a springboard to derive hypotheses about ambidexterity (the ability to exploit and explore simultaneously) and survival hazards. Using Regulatory Focus Theory, exploitative orientation, conceptualized as the motivational strength to continue on previous paths of action, was hypothesized to be not significantly different from that of lone founder startups. Taking previous arguments together, lone founder startups were hypothesized to be more ambidextrous than family startups. Finally, ambidexterity and internal locus of control were hypothesized to reduce survival hazards in family startups. The findings suggested that family startups explore less than lone founder startups even after controlling for group effects. Interesting but contradictory findings revealed that internal locus of control have both a positive direct effect and a positive interaction that increases the explorative and ambidextrous orientation gap of family startups over lone founder startups. As expected, ambidexterity and internal locus of control reduced survival hazards on family startups. Implications for practitioners were derived based on a sample of 470 nascent entrepreneurs.

CSR Communication - An Employee Perspective : Tailoring Internal Communication using Employee Preferences for Content, Style and Channel.

Corporate Social Responsibility (CSR) represents a theory and practice that is well-known and communicating its content has shown to play an important role in order to exploit its advantages and engage stakeholders on CSR issues. Even though, CSR communication has shown to be a real challenge, since corporations are encouraged to engage in CSR, but not to communicate too loud about this engagement. This study was inspired by Jenny Dawkins (2005) and her initial idea that tailoring CSR messages by exploring stakeholder preferences for content, style and channel, would solve the communication challenge. One stakeholder group that corporations are highly dependent on is employees and exploring their preferences for CSR communication became the purpose of this thesis: to understand employee preferences for style and channel within the content of CSR. This was of specific interest, since existing research on CSR communication has mainly been centered around financial and external issues on the expense of internal. In addition, the idea of a tailored approach has not gained any interest in research so far, and a possible explanation might be its diffuse meaning, a problem this thesis has addressed. In order to understand employee preferences for internal CSR communication, a qualitative case study research was conducted with in-depth interviews, observations and exercises at site. A total of 20 interviews were arranged in order to collect primary data during a one week prolong engagement at the case. The empirical findings from the respondents’ answers were then transcribed and analyzed using both inductive and theoretical thematic analysis. Based on the findings, the authors of this thesis contribute with two models that help practitioners to understand how to best communicate about various CSR content to employees. The first model developed suggests an implementation of the tailored approach for content, style and channel, and demonstrates a relationship between nature of content and constraint recognition. Also, the model explains how practitioners can provide CSR explanation in order to reduce skepticism and enable endorsement processes where employees communicate CSR to third parties. To show a more dependent relationship between how changes in nature of content and constraint recognition affect employee preferences, the authors created the "CSR Communication Grid". The authors made a theoretical contribution by clarifying and providing a framework for the tailoring approach as initially developed by Dawkins (2005). Additionally, the authors managed to draw a relation between Public Relations (PR) and CSR by referring models of PR to communication styles, which filled this gap in previous research.

Straddling The Gap: A MIddle School Teacher's Journey Towards Good Geography

Research points to a gap between academic or disciplinary based geography and what is taught in secondary classes across the nation. This study documents a teacher’s journey and efforts to bring a more disciplinary approach to two suburban heterogeneous sixth grade geography classrooms. The researcher traces student perspectives on geography and facility with geographic reasoning as well as his own perspectives and pedagogy with respect to student data. The study attempts to map the space where school geography meets and interacts with disciplinary oriented geography based upon the Geography for Life National Geography Standards. Participants completed two sets of baseline assessments and two sets of end of year assessments as well as an initial intake survey. The seven primary participants were interviewed five times each throughout the academic school year and data were openly coded. The data suggest that students can learn geography and geographic reasoning from a disciplinary perspective. Students sharpened their geographic skills through deeper subject matter knowledge and developing spatial and ecological perspectives. The data also indicate that the teacher researcher faced considerable challenges in implementing a disciplinary approach to teaching geography. The coverage demands of a crowded history-centric curriculum together with ill-fitting resources required a labor-intensive effort to put together and execute this study. Study findings indicate that the path to good geography pedagogy can be impeded by a host of external and internal challenges. However, to forward thinking practitioners, the effort to straddle the gap between school geography and disciplinary-based geography may be well worth it.

Knowledge and use of asthma control measurement tools in the management of asthma: a survey of doctors working in family and internal medicine practice in Nigeria.

Objective: To investigate the knowledge and use of asthma control measurement (ACM) tools in the management of asthma among doctors working in family and internal medicine practice in Nigeria. Method: A questionnaire based on the global initiative on asthma (GINA) guideline was self-administered by 194 doctors. It contains 12 test items on knowledge of ACM tools and its application. The knowledge score was obtained by adding the correct answers and classified as good if the score ≥ 9, satisfactory if score was 6-8 and poor if < 6. Results: The overall doctors knowledge score of ACM tools was 4.49±2.14 (maximum of 12). Pulmonologists recorded the highest knowledge score of 10.75±1.85. The majority (69.6%) had poor knowledge score of ACM tools. Fifty (25.8%) assessed their patients’ level of asthma control and 34(17.5%) at every visit. Thirty-nine (20.1%) used ACM tools in their consultation, 29 (15.0%) of them used GINA defined control while 10 (5.2 %) used asthma control test (ACT). The use of the tools was associated with pulmonologists, having attended CME within six months and graduated within five years prior to the survey. Conclusion: The results highlight the poor knowledge and use of ACM tools and the need to address the knowledge gap.

Social-cognitive Antecedents of Ambidextrous Orientation in Family-owned Startups: The Role of Family Ties, Achievement Motivation, and Internal Locus of Control

Regulatory Focus Theory predicts that the motivation to self-regulate goal-directed thought and behavior depends on two distinct regulation strategies: a promotion focus based on attaining gains and a prevention focus based on avoiding losses. This study took a social-cognitive approach predicting that regulatory focus has an impact on how family startups (several family related founders) explore “new ideas”, exploit “old certainties” and achieve the balance of both (ambidexterity), compared to lone founder startups (only one founder present). It was proposed that the social context of family ties among founders leads them to a prevention focus concerned with avoiding the loss of the socio-emotional benefits of those ties. In order to avoid such a loss, family founders were expected to increase their risk perceptions and thus, explore less than lone founders, who lack such socio-emotional ties. It was also proposed that two commonly used psychological traits in entrepreneurship research --achievement motivation and internal locus of control, predispose entrepreneurs to a promotion focus. Founders with a promotion focus, in turn, were hypothesized to lead startups to more risk-seeking behaviors and to more explorative orientation. The previous argument was used as a springboard to derive hypotheses about ambidexterity (the ability to exploit and explore simultaneously) and survival hazards. Using Regulatory Focus Theory, exploitative orientation, conceptualized as the motivational strength to continue on previous paths of action, was hypothesized to be not significantly different from that of lone founder startups. Taking previous arguments together, lone founder startups were hypothesized to be more ambidextrous than family startups. Finally, ambidexterity and internal locus of control were hypothesized to reduce survival hazards in family startups. The findings suggested that family startups explore less than lone founder startups even after controlling for group effects. Interesting but contradictory findings revealed that internal locus of control have both a positive direct effect and a positive interaction that increases the explorative and ambidextrous orientation gap of family startups over lone founder startups. As expected, ambidexterity and internal locus of control reduced survival hazards on family startups. Implications for practitioners were derived based on a sample of 470 nascent entrepreneurs.

Comparison Of Postoperative Stability Of Three Rigid Internal Fixation Techniques After Sagittal Split Ramus Osteotomy For Mandibular Advancement.

The aim of this investigation was to compare the skeletal stability of three different rigid fixation methods after mandibular advancement. Fifty-five class II malocclusion patients treated with the use of bilateral sagittal split ramus osteotomy and mandibular advancement were selected for this retrospective study. Group 1 (n = 17) had miniplates with monocortical screws, Group 2 (n = 16) had bicortical screws and Group 3 (n = 22) had the osteotomy fixed by means of the hybrid technique. Cephalograms were taken preoperatively, 1 week within the postoperative care period, and 6 months after the orthognathic surgery. Linear and angular changes of the cephalometric landmarks of the chin region were measured at each period, and the changes at each cephalometric landmark were determined for the time gaps. Postoperative changes in the mandibular shape were analyzed to determine the stability of fixation methods. There was minimum difference in the relapse of the mandibular advancement among the three groups. Statistical analysis showed no significant difference in postoperative stability. However, a positive correlation between the amount of advancement and the amount of postoperative relapse was demonstrated by the linear multiple regression test (p < 0.05). It can be concluded that all techniques can be used to obtain stable postoperative results in mandibular advancement after 6 months.

Development Plates For Stable Internal Fixation: Study Of Mechanical Resistance In Simulated Fractures Of The Mandibular Condyle.

To develop Y-shaped plates with different thicknesses to be used in simulated fractures of the mandibular condyle. Ten plates were developed in Y shape, containing eight holes, and 30 synthetic polyurethane mandible replicas were developed for the study. The load test was performed on an Instron Model 4411 universal testing machine, applying load in the mediolateral and anterior-posterior positions on the head of the condyle. Two-way ANOVA with Tukey testing with a 5% significance level was used. It was observed that when the load was applied in the medial-lateral plate of greater thickness (1.5 mm), it gave the highest strength, while in the anteroposterior direction, the plate with the highest resistance was of the lesser thickness (0.6 mm). A plate with a thickness of 1.5 mm was the one with the highest average value for all displacements. In the anteroposterior direction, the highest values of resistance were seen in the displacement of 15 mm. After comparing the values of the biomechanical testing found in the scientific literature, it is suggested that the use of Y plates are suitable for use in subcondylar fractures within the limitations of the study.

Contribuições da praxologia motriz para a educação fisica escolar : ensino fundamental

Universidade Estadual de Campinas . Faculdade de Educação Física

Permeability of different groups of maxillary teeth after 38% hydrogen peroxide internal bleaching

This study evaluated the influence of internal tooth bleaching with 38% hydrogen peroxide (H2O2) on the permeability of the coronal dentin in maxillary anterior teeth and premolars. Seventy teeth (14 per group) were used: central incisors (CI), lateral incisor (LI), canines (C), first premolars (1PM) and second premolars (2PM). Pulp chamber access and transversal sectioning at 2 mm from the cementoenamel junction were performed and the specimens were divided into 2 groups (n= 7): a) no treatment and b) bleaching with 38% H2O2. The bleaching agent was applied to the buccal surface and to the pulp chamber for 10 min. This procedure was repeated 3 times. The specimens were processed histochemically with copper sulfate and rubeanic acid, sectioned longitudinally, and digitalized in a scanner. The area of stained dentin was measured using Image Tool software. Data were analyzed statistically by ANOVA and Tukey's HSD test (?=0.05). There was statistically significant difference (p<0.001) among the untreated groups, CI (0.23 ± 0.26) having the lowest permeability and LI (10.14 ± 1.89) the highest permeability. Among the bleached groups, dentin permeability was increased in all groups of teeth except for 2PM. It may be concluded that bleaching with 38% H2O2 affected dentin permeability near the pulp chamber in maxillary anterior teeth and in first and second premolars.

Comparison of some theoretical models for fittings of the temperature dependence of the fundamental energy gap in GaAs

In this work we report on a comparison of some theoretical models usually used to fit the dependence on temperature of the fundamental energy gap of semiconductor materials. We used in our investigations the theoretical models of Viña, Pässler-p and Pässler-ρ to fit several sets of experimental data, available in the literature for the energy gap of GaAs in the temperature range from 12 to 974 K. Performing several fittings for different values of the upper limit of the analyzed temperature range (Tmax), we were able to follow in a systematic way the evolution of the fitting parameters up to the limit of high temperatures and make a comparison between the zero-point values obtained from the different models by extrapolating the linear dependence of the gaps at high T to T = 0 K and that determined by the dependence of the gap on isotope mass. Using experimental data measured by absorption spectroscopy, we observed the non-linear behavior of Eg(T) of GaAs for T > ΘD.