Evolução geológica dos batólitos granitóides neoproterozóicos do sudeste do estado de são paulo

The Neoproterozoic granitogenesis related to the Central Mantiqueira Province comprise the calc alkaline to alkaline granitoid complexes of Sorocaba, San Francisco, São Roque, Ibiúna and Piedade. These complexes occur in a ruptil tectonic to tardi (Sn+3) event. The emplacement of the different facies in transtractives structures of the pull-apart type are characterized in the area by the main transcurrent shear zones of Taxaquara-Pirapora, Itu-Jundiuvira, Moreiras, Cangüera and Caucáia of ENE-WSW general direction. The massifs present complex internal architecture characterized by intrusions in restrict initial phase of intermediate equigranular nature. Also present a main phase of porfiroid monzo and sienogranite that fragments the previous phase, followed by lateral accretion of equi to inequigranular material, and in some cases by the accretion of late phases of circular bodies of porfiroid rapakivi granites, and a late to final phase of aplitic to pegmatitic composition. This magmatism grew with the intrusions of successive magmatic pulses, partially controlled by many reactivations of the shear zones. The REE also suggest that the magmatic phases are similar, synchronous and repetitive in four of the complexes in both domains, present in the São Francisco Complex. The crystallization starts from accretion processes, but compositionally quite different from the others. The variation in compositions and ages (TDM) for these granites reflect the derivation from different sources developed under different magmatic conditions, followed by processes of contamination that frequently occur in the crust.

Einfluß der internen Architektur von Polymermikronetzwerken auf Struktur und Dynamik konzentrierter Kolloid-Dispersionen

Einfluß der internen Architektur von Polymermikronetzwerken auf Struktur und Dynamik konzentrierter Kolloid-Dispersionen Kugelförmige Polymermikronetzwerk-Kolloide gehören zur Klasse der sogenannten Mikrogele. Dabei handelt es sich um kolloidale Modellsysteme, die durch ihre interne Vernetzungsdichte charakterisiert werden.In dieser Arbeit sollte untersucht werden, ob sich die Wechselwirkungen zwischen den Mikrogel-Kolloiden über ein repulsives Potential der Form U(r) = 1/rn beschreiben lassen und ob der Poten-tialexponent n von der Vernetzungsdichte abhängt. Dazu wurden vor allem die innere Architektur, das Phasenverhalten und der statische Strukturfaktor 1:10, 1:50, 1:72 und 1:100 vernetzter Polymer-Mikronetzwerk-Kolloide bis in den Bereich hochkonzentrierter Dispersionen mit den Mitteln der Kleinwinkelneutronenstreuung, der Digitalphotographie und der statischen Lichtstreuung untersucht. Polymeranalytische Untersuchungen ergaben einen bei der Synthese anfallenden Anteil von unver-netztem, freiem Polymer innerhalb der Mikronetzwerke, welcher sich beim Lösen aus den Netzwerken herausbewegte. Das freie Polymer spielte vor allem beim Phasenverhalten der untersuchten Teilchen eine große Rolle und verursachte bei den Untersuchungen der statischen Strukturfaktoren Abweichun-gen vom 'harte Kugel'-Verhalten. Als Ergebnis der Kleinwinkel-Neutronenstreuung konnte eine ab-nehmende Verteilungsdichte der Vernetzer innerhalb der Polymermikronetzwerke in Richtung der -Teilchenoberfläche nachgewiesen werden. Die damit verbundene Konformationsfreiheit der Polymer-segmente auf der Teilchenoberfläche (bis hin zu 'mushroom'-Strukturen) wurde als Grund dafür an-gesehen, daß sich die Resultate der untersuchten Mikrogele aller Vernetzungsdichten im wesentlichen auf 'harte Kugeln' skalieren lassen.

Jaw mechanics of the pterosaur skull construction and the evolution of toothlessness

In the present study, pterosaur skull constructions were analysed using a combined approach of finite element analysis (FEA), static investigations as well as applying classical beam theory and lever mechanics. The study concentrates on the operating regime „bite“, where loads are distributed via the dentition or a keratinous rhamphotheca into the skull during jaw occlusion. As a first step, pterosaur tooth constructions were analysed. The different morphologies of the tooth construction determine specific operational ranges, in which the teeth perform best (= greatest resistance against failure). The incomplete enamel-covering of the pterosaur tooth constructions thereby leads to a reduction of strain and stress and to a greater lateral elasticity than for a complete enamel cover. This permits the development of high and lateral compressed tooth constructions. Further stress-absorption occurs in the periodontal membrane, although its mechanical properties can not be clarified unambiguously. A three-dimensionally preserved skull of Anhanguera was chosen as a case-study for the investigation of the skull constructions. CT-scans were made to get information about the internal architecture, supplemented by thin-sections of a rostrum of a second Anhanguera specimen. These showed that the rostrum can be approximated as a double-walled triangular tube with a large central vacuity and an average wall-thickness of the bony layers of about 1 mm. On base of the CT-scans, a stereolithography of the skull of Anhanguera was made on which the jaw adductor and abductor muscles were modelled, permitting to determine muscular forces. The values were used for the lever mechanics, cantilever and space frame analysis. These studies and the FEA show, that the jaw reaction forces are critical for the stability of the skull construction. The large jugal area ventral to the orbita and the inclined occipital region act as buttresses against these loads. In contrast to the orbitotemporal region which is subject to varying loading conditions, the pattern in the rostrum is less complex. Here, mainly bending in dorsal direction and torsion occur. The hollow rostrum leads to a reduction of weight of the skull and to a high bending and torsional resistance. Similar to the Anhanguera skull construction, the skulls of those pterosaur taxa were analysed, from which enough skull material is know to permit a reliable reconstruction. Furthermore, FEA were made from five selected taxa. The comparison of the biomechanical behaviour of the different skull constructions results in major transformational processes: elongation of rostra, inclination of the occipital region, variation of tooth morphology, reduction of the dentition and replacement of teeth by a keratinous hook or rhamphotheca, fusion of naris and antorbital fenestra, and the development of bony and soft-tissue crests. These processes are discussed for their biomechanical effects during bite. Certain optional operational ranges for feeding are assigned to the different skull constructions and previous hypotheses (e.g. skimming) are verified. Using the principle of economisation, these processes help to establish irreversible transformations and to define possible evolutionary pathways. The resulting constructional levels and the structural variations within these levels are interpreted in light of a greater feeding efficiency and reduction of bony mass combined with an increased stability against the various loads. The biomechanical conclusive pathways are used for comparison and verification of recent hypothesis of the phylogenetic systematics of pterosaurs.

Impairment of mitochondrial tRNAIle processing by a novel mutation associated with chronic progressive external ophthalmoplegia

We report a sporadic case of chronic progressive external ophthalmoplegia associated with ragged red fibers. The patient presented with enlarged mitochondria with deranged internal architecture and crystalline inclusions. Biochemical studies showed reduced activities of complex I, III and IV in skeletal muscle. Molecular genetic analysis of all mitochondrial tRNAs revealed a G to A transition at nt 4308; the G is a highly conserved nucleotide that participates in a GC base-pair in the T-stem of mammalian mitochondrial tRNA(Ile). The mutation was detected at a high level (approx. 50%) in muscle but not in blood. The mutation co-segregated with the phenotype, as the mutation was absent from blood and muscle in the patient's healthy mother. Functional characterization of the mutation revealed a six-fold reduced rate of tRNA(Ile) precursor 3' end maturation in vitro by tRNAse Z. Furthermore, the mutated tRNA(Ile) displays local structural differences from wild-type. These results suggest that structural perturbations reduce efficiency of tRNA(Ile) precursor 3' end processing and contribute to the molecular pathomechanism of this mutation.

Lecciones prácticas de desarrollo de aplicaciones móviles en Android

Los avances que se han producido en los últimos años en cuanto a potencia y capacidades de los teléfonos móviles que usamos de manera cotidiana, traen de la mano un auge en la demanda de aplicaciones de todo ámbito: desde aplicaciones generales de consumo, pasando por juegos, hasta aplicaciones que ofrecen soluciones internas a empresas. Existen diferentes sistemas operativos para teléfonos móviles como se explicará más adelante en el capítulo introductorio. En dicho capítulo se da la justificación de por qué en el presente Proyecto Fin de Carrera se centra en el estudio del sistema operativo Android. Primeramente se dará una visión global del estado del arte en cuanto al mundo de aplicaciones móviles se refiere. Se explicarán los pros y contras de cada sistema operativo, detallando el lenguaje de programación utilizado en cada uno de ellos y sus principales características. Después, en el capítulo tres se estudiará con más profundidad el sistema operativo Android, desde su historia y orígenes, hasta los componentes básicos para la creación de una aplicación, pasando por la arquitectura interna del sistema o su máquina virtual. Con esto se pretende que el lector tenga un contexto que le permita comprender los siguientes capítulos, que es donde está el núcleo de este Proyecto Fin de Carrera. El cuarto capítulo trata de una serie de prácticas incrementales, que cubren una gran parte de las posibilidades que ofrece el sistema operativo Android para el desarrollo de aplicaciones. Se ha pretendido que la dificultad vaya de menos a más y que las prácticas se vayan apoyando en las anteriores, para tener al final una única solución que englobe todas las lecciones. El último capítulo quiere englobar el uso de todas las lecciones aprendidas en las lecciones anteriores para crear una aplicación que bien podría ser una aplicación real para un cliente. Se trata de una aplicación que muestra en tiempo real información sobre las cámaras de tráfico de la ciudad de Madrid. ABSTRACT. The improvements that have occurred in recent years in terms of power and capabilities of mobile phones that we use on a daily basis, bring an increment in demand for all kind of applications, from general consumer applications, games or even internal applications that offer solutions to companies. There are different operating systems for mobile phones as will be explained later in the introductory chapter. In that chapter the answer for why this Thesis focuses on the study of the Android operating system is given as well. First an overview of the state of the art about the world of mobile applications will be referred. The pros and cons of each operating system will be explained, detailing the programming language used in each of them and their main characteristics. Then in chapter three will be discussed in more depth the Android operating system, from its history and beginnings to the main components for the creation of an application, to the internal architecture of the system or virtual machine. The goal of chapter three is to give the readers a context that allows them to understand the following chapters, where the core of this Thesis is. The fourth chapter contains a series of incremental practices covering a large part of the potential of the Android operating system for application development. Those practices grow in difficulty and are supported by the previous in order to have at the end a single solution that fits all lessons. The last chapter wants to embrace the use of all the lessons learned in previous lessons to create an application that could well be an actual application for a client. It is an application that displays real-time information off traffic cameras of the city of Madrid.

Evolução dos sistemas de falhas de borda do Rifte Potiguar com base em curvas de crescimento de falhas

The discussion about rift evolution in the Brazilian Equatorial margin during the South America-Africa breakup in the Jurassic/Cretaceous has been focused in many researches. But rift evolution based on development and growth of faults has not been well explored. In this sense, we investigated the Cretaceous Potiguar Basin in the Equatorial margin of Brazil to understand the geometry of major faults and the influence of crustal heterogeneity and preexisting structural fabric in the evolution of the basin internal architecture. Previous studies pointed out that the rift is an asymmetrical half-graben elongated along the NE-SW direction. We used 2D seismic, well logs and 3D gravity modeling to analyze four major border fault segments and determine their maximum displacement (Dmax) and length (L) ratio in the Potiguar Rift. We constrained the 3D gravity modeling with well data and the interpretation of seismic sections. The difference of the fault displacement measured in the gravity model is in the order of 10% compared to seismic and well data. The fault-growth curves allowed us to divide the faulted rift border into four main fault segments, which provide roughly similar Dmax/L ratios. Fault-growth curves suggest that a regional uniform tectonic mechanism influenced growth of the rift fault segments. The variation of the displacements along the fault segments indicates that the fault segments were formed independently during rift initiation and were linked by hard and soft linkages. The latter formed relay ramps. In the interconnection zones the Dmax/L ratios are highest due to interference of fault segment motions. We divided the evolution of the Potiguar Rift into five stages based on these ratios and correlated them with the major tectonic stages of the breakup between South America and Africa in Early Cretaceous.

Evolução dos sistemas de falhas de borda do Rifte Potiguar com base em curvas de crescimento de falhas

The discussion about rift evolution in the Brazilian Equatorial margin during the South America-Africa breakup in the Jurassic/Cretaceous has been focused in many researches. But rift evolution based on development and growth of faults has not been well explored. In this sense, we investigated the Cretaceous Potiguar Basin in the Equatorial margin of Brazil to understand the geometry of major faults and the influence of crustal heterogeneity and preexisting structural fabric in the evolution of the basin internal architecture. Previous studies pointed out that the rift is an asymmetrical half-graben elongated along the NE-SW direction. We used 2D seismic, well logs and 3D gravity modeling to analyze four major border fault segments and determine their maximum displacement (Dmax) and length (L) ratio in the Potiguar Rift. We constrained the 3D gravity modeling with well data and the interpretation of seismic sections. The difference of the fault displacement measured in the gravity model is in the order of 10% compared to seismic and well data. The fault-growth curves allowed us to divide the faulted rift border into four main fault segments, which provide roughly similar Dmax/L ratios. Fault-growth curves suggest that a regional uniform tectonic mechanism influenced growth of the rift fault segments. The variation of the displacements along the fault segments indicates that the fault segments were formed independently during rift initiation and were linked by hard and soft linkages. The latter formed relay ramps. In the interconnection zones the Dmax/L ratios are highest due to interference of fault segment motions. We divided the evolution of the Potiguar Rift into five stages based on these ratios and correlated them with the major tectonic stages of the breakup between South America and Africa in Early Cretaceous.

The principles of Gothic ecclesiastical architecture, with an explanation of technical terms, and a centenary of ancient terms, together also with notices of the internal arrangement of churches prior to, and the changes therein in and from, the reign of Edward VI.,

Mode of access: Internet.

Multiagent System Architecture for Short-term Operation of Integrated Microgrids

The forthcoming smart grids are comprised of integrated microgrids operating in grid-connected and isolated mode with local generation, storage and demand response (DR) programs. The proposed model is based on three successive complementary steps for power transaction in the market environment. The first step is characterized as a microgrid’s internal market; the second concerns negotiations between distinct interconnected microgrids; and finally, the third refers to the actual electricity market. The proposed approach is modeled and tested using a MAS framework directed to the study of the smart grids environment, including the simulation of electricity markets. This is achieved through the integration of the proposed approach with the MASGriP (Multi-Agent Smart Grid Platform) system.

Task-dependent influence of genetic architecture and mating frequency on division of labour in social insect societies.

Division of labour is one of the most prominent features of social insects. The efficient allocation of individuals to different tasks requires dynamic adjustment in response to environmental perturbations. Theoretical models suggest that the colony-level flexibility in responding to external changes and internal perturbation may depend on the within-colony genetic diversity, which is affected by the number of breeding individuals. However, these models have not considered the genetic architecture underlying the propensity of workers to perform the various tasks. Here, we investigated how both within-colony genetic variability (stemming from variation in the number of matings by queens) and the number of genes influencing the stimulus (threshold) for a given task at which workers begin to perform that task jointly influence task allocation efficiency. We used a numerical agent-based model to investigate the situation where workers had to perform either a regulatory task or a foraging task. One hundred generations of artificial selection in populations consisting of 500 colonies revealed that an increased number of matings always improved colony performance, whatever the number of loci encoding the thresholds of the regulatory and foraging tasks. However, the beneficial effect of additional matings was particularly important when the genetic architecture of queens comprised one or a few genes for the foraging task's threshold. By contrast, a higher number of genes encoding the foraging task reduced colony performance with the detrimental effect being stronger when queens had mated with several males. Finally, the number of genes encoding the threshold for the regulatory task only had a minor effect on colony performance. Overall, our numerical experiments support the importance of mating frequency on efficiency of division of labour and also reveal complex interactions between the number of matings and genetic architecture.

WAIS seminar: Application Performance Monitoring and Architecture Discovery with Kieker

Wednesday 23rd April 2014 Speaker(s): Willi Hasselbring Organiser: Leslie Carr Time: 23/04/2014 14:00-15:00 Location: B32/3077 File size: 802Mb Abstract The internal behavior of large-scale software systems cannot be determined on the basis of static (e.g., source code) analysis alone. Kieker provides complementary dynamic analysis capabilities, i.e., monitoring/profiling and analyzing a software system's runtime behavior. Application Performance Monitoring is concerned with continuously observing a software system's performance-specific runtime behavior, including analyses like assessing service level compliance or detecting and diagnosing performance problems. Architecture Discovery is concerned with extracting architectural information from an existing software system, including both structural and behavioral aspects like identifying architectural entities (e.g., components and classes) and their interactions (e.g., local or remote procedure calls). In addition to the Architecture Discovery of Java systems, Kieker supports Architecture Discovery for other platforms, including legacy systems, for instance, inplemented in C#, C++, Visual Basic 6, COBOL or Perl. Thanks to Kieker's extensible architecture it is easy to implement and use custom extensions and plugins. Kieker was designed for continuous monitoring in production systems inducing only a very low overhead, which has been evaluated in extensive benchmark experiments. Please, refer to http://kieker-monitoring.net/ for more information.

EU Home Affairs Agencies and the Construction of EU Internal Security. CEPS Paper in Liberty and Security No. 53/December 2012

Regulatory agencies such as Europol, Frontex, Eurojust, CEPOL as well as bodies such as OLAF, have over the past decade become increasingly active within the institutional architecture constituting the EU’s Area of Freedom, Security and Justice and are now placed at the forefront of implementing and developing the EU’s internal security model. A prominent feature of agency activity is the large-scale proliferation of ‘knowledge’ on security threats via the production of policy tools such as threat assessments, risk analyses, periodic and situation reports. These instruments now play a critical role in providing the evidence-base that supports EU policymaking, with agency-generated ‘knowledge’ feeding political priority setting and decision-making within the EU’s new Internal Security Strategy (ISS). This paper examines the nature and purpose of knowledge generated by EU Home Affairs agencies. It asks where does this knowledge originate? How does it measure against criteria of objectivity, scientific rigour, reliability and accuracy? And how is it processed in order to frame threats, justify actions and set priorities under the ISS?

Relational architecture and relational capability: organisational levers to support strategic supplier relationships

The resource based view of strategy suggests that competitiveness in part derives from a firms ability to collaborate with a subset of its supply network to co-create highly valued products and services. This relational capability relies on a foundational intra and inter-organisational architecture, the manifestation of strategic, people, and process decisions facilitating the interface between the firm and its strategic suppliers. Using covariance-based structural equation modelling we examine the relationships between internal and external features of relational architecture, and their relationship with relational capability and relational quality. This is undertaken on data collected by mail survey. We find significant relationships between both internal and external relational architecture and relational capability and between relational capability and relational quality. Novel constructs for internal and external elements of relational architecture are specified to demonstrate their positive influence on relational capability and relationship quality.

Nest architecture of the leaf-cutting ant Acromyrmex rugosus rugosus

The prominent nests mounds of many ant species are one of the most obvious signs of their presence, yet the subterranean architecture of nests is often poorly known. The present work aimed to establish the external and internal structure of nests of a species of leaf-cutting ant, Acromyrmex rugosus rugosus, by either marking the interior of nests with talcum powder, or forming casts with cement. Twelve nests were excavated and surveyed, with eight being marked with talcum powder and four cast with cement. The external and internal structure of the nests was highly variable. The largest and smallest nests had mound areas of 9.89 m(2) and 0.01 m(2) respectively. The number of chambers found ranged from I to 26, with maximum dimensions of between 6 and 70 cm. Chambers were found close to the soil surface (6 cm) down to a maximum depth of 3.75 m. In addition to chambers containing fungus garden, some chambers were found to be empty, filled with soil or filled with waste, the first time this has been recorded in a species of Acromyrmex. The nests of A. rugosus rugosus appear to be unusually complex for the genus, containing a diversity of irregular chambers and tunnels.

Nest architecture of Atta laevigata (F. Smith, 1858) (Hymenoptera : Formicidae)

The internal structure of three nests of Atta laevigata was studied in Botucatu city, São Paulo State, Brazil. Two nests were excavated through the opening of trenches and one was cement-moulded to enable a better view of the internal structures. The three nests presented a similar structure, with the depths and number of chambers varying as a function of the loose soil area of the nests. The number of chambers ranged from 1149 to 7864, reaching as deep as 7 m underground. Chamber volume ranged from 0.03 to 511. The foraging tunnels extended as far as 70m from the loose soil region. The nests of this species are the deepest within the genus Atta and have the highest number of chambers.