The Use of a Computer Graphic Organizer for Persuasive Composition Writing by Hispanic Students with Specific Learning Disabilities

Many culturally and linguistically diverse (CLD) students with specific learning disabilities (SLD) struggle with the writing process. Particularly, they have difficulties developing and expanding ideas, organizing and elaborating sentences, and revising and editing their compositions (Graham, Harris, & Larsen, 2001; Myles, 2002). Computer graphic organizers offer a possible solution to assist them in their writing. This study investigated the effects of a computer graphic organizer on the persuasive writing compositions of Hispanic middle school students with SLD. A multiple baseline design across subjects was used to examine its effects on six dependent variables: number of arguments and supporting details, number and percentage of transferred arguments and supporting details, planning time, writing fluency, syntactical maturity (measured by T-units, the shortest grammatical sentence without fragments), and overall organization. Data were collected and analyzed throughout baseline and intervention. Participants were taught persuasive writing and the writing process prior to baseline. During baseline, participants were given a prompt and asked to use paper and pencil to plan their compositions. A computer was used for typing and editing. Intervention required participants to use a computer graphic organizer for planning and then a computer for typing and editing. The planning sheets and written composition were printed and analyzed daily along with the time each participant spent on planning. The use of computer graphic organizers had a positive effect on the planning and persuasive writing compositions. Increases were noted in the number of supporting details planned, percentage of supporting details transferred, planning time, writing fluency, syntactical maturity in number of T-units, and overall organization of the composition. Minimal to negligible increases were noted in the mean number of arguments planned and written. Varying effects were noted in the percent of transferred arguments and there was a decrease in the T-unit mean length. This study extends the limited literature on the effects of computer graphic organizers as a prewriting strategy for Hispanic students with SLD. In order to fully gauge the potential of this intervention, future research should investigate the use of different features of computer graphic organizer programs, its effects with other writing genres, and different populations.

Virtual Research Environments Roundtable

The roundtable offered an opportunity to share experiences and perceptions of virtual research environments. John Doove (SURFfoundation) presented his impressions from the VRE projects. Jim Farmer, Instructional Media + Magic led a 50 minute discussion on key developments and challenges. The discussion included issues like: An emerging issue is the sharp and continuous increase of data in an era of limited resources. These increases often reduce the effectiveness of search-additional time is required to find expected results. Would new methods of search may be useful? Should this be included as services in a VRE? The form of much new 'knowledge' is in informal 'publications' such as blogs, email, audio, and video which lack the precise metadata of books and journal articles. Could VRE services assist in using these resources as well? The programme continued with discussions on business models for sustainability led by Birte Christensen-Dalsgaard, The Royal Library, and policy and funders' interventions led by Sigrun Eckelmann, DFG.

The Relationship of Instructor Technical Literacy to the Academic Performance of Students in Career Academies

Career Academy instructors’ technical literacy is vital to the academic success of students. This nonexperimental ex post facto study examined the relationships between the level of technical literacy of instructors in career academies and student academic performance. It was also undertaken to explore the relationship between the pedagogical training of instructors and the academic performance of students. Out of a heterogeneous population of 564 teachers in six targeted schools, 136 teachers (26.0 %) responded to an online survey. The survey was designed to gather demographic and teaching experience data. Each demographic item was linked by researchers to teachers’ technology use in the classroom. Student achievement was measured by student learning gains as assessed by the reading section of the FCAT from the previous to the present school year. Linear and hierarchical regressions were conducted to examine the research questions. To clarify the possibility of teacher gender and teacher race/ethnic group differences by research variable, a series of one-way ANOVAs were conducted. As revealed by the ANOVA results, there were not statistically significant group differences in any of the research variables by teacher gender or teacher race/ethnicity. Greater student learning gains were associated with greater teacher technical expertise integrating computers and technology into the classroom, even after controlling for teacher attitude towards computers. Neither teacher attitude toward technology integration nor years of experience in integrating computers into the curriculum significantly predicted student learning gains in the regression models. Implications for HRD theory, research, and practice suggest that identifying teacher levels of technical literacy may help improve student academic performance by facilitating professional development strategies and new parameters for defining highly qualified instructors with 21st century skills. District professional development programs can benefit by increasing their offerings to include more computer and information communication technology courses. Teacher preparation programs can benefit by including technical literacy as part of their curriculum. State certification requirements could be expanded to include formal surveys to assess teacher use of technology.

Disaster management in Nepal: Media engagement in the Post-2015 Framework for Disaster Risk Reduction

Nepal, as a consequence of its geographical location and changing climate, faces frequent threats of natural disasters. According to the World Bank’s 2005 Natural Disasters Hotspots Report, Nepal is ranked the 11th most vulnerable country to earthquake and 30th to flood risk. Geo-Hazards International (2011) has classified Kathmandu as one of the world’s most vulnerable cities to earthquakes. In the last four decades more than 32,000 people in Nepal have lost their lives and annual monetary loss is estimated at more than 15 million (US) dollars. This review identifies gaps in knowledge, and progress towards implementation of the Post Hyogo Framework of Action. Nepal has identified priority areas: community resilience, sustainable development and climate change induced disaster risk reduction. However, one gap between policy and action lies in the ability of Nepal to act effectively in accordance with an appropriate framework for media activities. Supporting media agencies include the Press Council, Federation of Nepalese Journalists, Nepal Television, Radio Nepal and Telecommunications Authority and community based organizations. The challenge lies in further strengthening traditional and new media to undertake systematic work supported by government bodies and the National Risk Reduction Consortium (NRRC). Within this context, the ideal role for media is one that is proactive where journalists pay attention to a range of appropriate angles or frames when preparing and disseminating information. It is important to develop policy for effective information collection, sharing and dissemination in collaboration with Telecommunication, Media and Journalists. The aim of this paper is to describe the developments in disaster management in Nepal and their implications for media management. This study provides lessons for government, community and the media to help improve the framing of disaster messages. Significantly, the research highlights the prominence that should be given to flood, landslides, lightning and earthquakes.

Investigation of polyhydroxyalkanoate production by an activated sludge microbial consortium treating artificial dairy wastewater

Petrochemical plastics/polymers are a common feature of day to day living as they occur in packaging, furniture, mobile phones, computers, construction equipment etc. However, these materials are produced from non-renewable materials and are resistant to microbial degradation in the environment. Considerable research has therefore been carried out into the production of sustainable, biodegradable polymers, amenable to microbial catabolism to CO2 and H2O. A key group of microbial polyesters, widely considered as optimal replacement polymers, are the Polyhydroxyalkaonates (PHAs). Primary research in this area has focused on using recombinant pure cultures to optimise PHA yields, however, despite considerable success, the high costs of pure culture fermentation have thus far hindered the commercial viability of PHAs thus produced. In more recent years work has begun to focus on mixed cultures for the optimisation of PHA production, with waste incorporations offering optimal production cost reductions. The scale of dairy processing in Ireland, and the high organic load wastewaters generated, represent an excellent potential substrate for bioconversion to PHAs in a mixed culture system. The current study sought to investigate the potential for such bioconversion in a laboratory scale biological system and to establish key operational and microbial characteristics of same. Two sequencing batch reactors were set up and operated along the lines of an enhanced biological phosphate removal (EBPR) system, which has PHA accumulation as a key step within repeated rounds of anaerobic/aerobic cycling. Influents to the reactors varied only in the carbon sources provided. Reactor 1 received artificial wastewater with acetate alone, which is known to be readily converted to PHA in the anaerobic step of EBPR. Reactor 2 wastewater influent contained acetate and skim milk to imitate a dairy processing effluent. Chemical monitoring of nutrient remediation within the reactors as continuously applied and EBPR consistent performances observed. Qualitative analysis of the sludge was carried out using fluorescence microscopy with Nile Blue A lipophillic stain and PHA production was confirmed in both reactors. Quantitative analysis via HPLC detection of crotonic acid derivatives revealed the fluorescence to be short chain length Polyhydroxybutyrate, with biomass dry weight accumulations of 11% and 13% being observed in reactors 1 and 2, respectively. Gas Chromatography-Mass Spectrometry for medium chain length methyl ester derivatives revealed the presence of hydroxyoctanoic, -decanoic and -dodecanoic acids in reactor 1. Similar analyses in reactor 2 revealed monomers of 3-hydroxydodecenoic and 3-hydroxytetradecanoic acids. Investigation of the microbial ecology of both reactors as conducted in an attempt to identify key species potentially contributing to reactor performance. Culture dependent investigations indicated that quite different communities were present in both reactors. Reactor 1 isolates demonstrated the following species distributions Pseudomonas (82%), Delftia acidovorans (3%), Acinetobacter sp. (5%) Aminobacter sp., (3%) Bacillus sp. (3%), Thauera sp., (3%) and Cytophaga sp. (3%). Relative species distributions among reactor 2 profiled isolates were more evenly distributed between Pseudoxanthomonas (32%), Thauera sp (24%), Acinetobacter (24%), Citrobacter sp (8%), Lactococcus lactis (5%), Lysinibacillus (5%) and Elizabethkingia (2%). In both reactors Gammaproteobacteria dominated the cultured isolates. Culture independent 16S rRNA gene analyses revealed differing profiles for both reactors. Reactor 1 clone distribution was as follows; Zooglea resiniphila (83%), Zooglea oryzae (2%), Pedobacter composti (5%), Neissericeae sp. (2%) Rhodobacter sp. (2%), Runella defluvii (3%) and Streptococcus sp. (3%). RFLP based species distribution among the reactor 2 clones was as follows; Runella defluvii (50%), Zoogloea oryzae (20%), Flavobacterium sp. (9%), Simplicispira sp. (6%), Uncultured Sphingobacteria sp. (6%), Arcicella (6%) and Leadbetterella bysophila (3%). Betaproteobacteria dominated the 16S rRNA gene clones identified in both reactors. FISH analysis with Nile Blue dual staining resolved these divergent findings, identifying the Betaproteobacteria as dominant PHA accumulators within the reactor sludges, although species/strain specific allocations could not be made. GC analysis of the sludge had indicated the presence of both medium chain length as well short chain length PHAs accumulating in both reactors. In addition the cultured isolates from the reactors had been identified previously as mcl and scl PHA producers, respectively. Characterisations of the PHA monomer profiles of the individual isolates were therefore performed to screen for potential novel scl-mcl PHAs. Nitrogen limitation driven PHA accumulation in E2 minimal media revealed a greater propensity among isoates for mcl-pHA production. HPLC analysis indicated that PHB production was not a major feature of the reactor isolates and this was supported by the low presence of scl phaC1 genes among PCR screened isolates. A high percentage distribution of phaC2 mcl-PHA synthase genes was recorded, with the majority sharing high percentage homology with class II synthases from Pseudomonas sp. The common presence of a phaC2 homologue was not reflected in the production of a common polymer. Considerable variation was noted in both the monomer composition and ratios following GC analysis. While co-polymer production could not be demonstrated, potentially novel synthase substrate specificities were noted which could be exploited further in the future.

Developing students’ ability to engage critically with science in the news: identifying elements of the ‘media awareness’ dimension

Worldwide, science education reform movements are stressing the need to promote ‘scienti?c literacy’ among young people. Increasingly, this is taken to include empowering students to engage critically with science-related news reporting. Despite this requirement now featuring in statutory curricula throughout the UK, there has, to date, been a dearth of research-informed advice to assist science teachers as they identify appropriate instructional objectives in this regard and design relevant learning activities through which these might be achieved. In this study, prominent science communication
scholars, science journalists, science educators and media educators were interviewed to determine what knowledge, skills and habits of mind they judged valuable for individuals reading science-related news stories. Teachers of science and of English from nine secondary schools in Northern Ireland addressed the same issue. A striking – and signi?cant – ?nding of the study was the very substantial number of statements of knowledge, skill and disposition o?ered by participants that relate to ‘media awareness’, an issue largely overlooked in the science education literature. The school-focused phase of the research suggests that cross-curricular approaches involving teachers of science collaborating with those of English/media education or media studies may best serve to address this important curricular goal.

Instructional Methods For Optimal Learning For An Aerospace Assembly Task: digital animation v pictogram-based instructions

Previous studies on work instruction delivery for complex assembly tasks have shown that the mode and delivery method for the instructions in an engineering context can influence both build time and product quality. The benefits of digital, animated instructional formats when compared to static pictures and text only formats have already been demonstrated. Although pictograms have found applications for relatively straight forward operations and activities, their applicability to relatively complex assembly tasks has yet to be demonstrated. This study compares animated instructions and pictograms for the assembly of an aircraft panel. Based around a series of build experiments, the work records build time as well as the number of media references to measure and compare build efficiency. The number of build errors and the time required to correct them is also recorded. The experiments included five participants completing five builds over five consecutive days for each media type. Results showed that on average the total build time was 13.1% lower for the group using animated instructions. The benefit of animated instructions on build time was most prominent in the first three builds, by build four this benefit had disappeared. There were a similar number of instructional references for the two groups over the five builds but the pictogram users required a lot more references during build 1. There were more errors among the group using pictograms requiring more time for corrections during the build.

Ontology based Framework for News Extraction in Visual Media

Anticipating the increase in video information in future, archiving of news is an important activity in the visual media industry. When the volume of archives increases, it will be difficult for journalists to find the appropriate content using current search tools. This paper provides the details of the study we conducted about the news extraction systems used in different news channels in Kerala. Semantic web technologies can be used effectively since news archiving share many of the characteristics and problems of WWW. Since visual news archives of different media resources follow different metadata standards, interoperability between the resources is also an issue. World Wide Web Consortium has proposed a draft for an ontology framework for media resource which addresses the intercompatiblity issues. In this paper, the w3c proposed framework and its drawbacks is also discussed

An instructional design model for constructivist learning

The emergent requirements for effective e-learning calls for a paradigm shift for instructional design. Constructivist theory and semiotics offer a sound underpinning to enable such revolutionary change by employing the concepts of Learning Objects. E-learning guidelines adopted by the industry have led successfully to the development of training materials. Inadequacy and deficiency of those methods for Higher Education have been identified in this paper. Based on the best practice in industry and our empirical research, we present an instructional design model with practical templates for constructivist learning.

Instructional strategies integrating cognitive style construct : a meta-knowledge processing model

The overarching goal of this dissertation was to evaluate the contextual components of instructional strategies for the acquisition of complex programming concepts. A meta-knowledge processing model is proposed, on the basis of the research findings, thereby facilitating the selection of media treatment for electronic courseware. When implemented, this model extends the work of Smith (1998), as a front-end methodology, for his glass-box interpreter called Bradman, for teaching novice programmers. Technology now provides the means to produce individualized instructional packages with relative ease. Multimedia and Web courseware development accentuate a highly graphical (or visual) approach to instructional formats. Typically, little consideration is given to the effectiveness of screen-based visual stimuli, and curiously, students are expected to be visually literate, despite the complexity of human-computer interaction. Visual literacy is much harder for some people to acquire than for others! (see Chapter Four: Conditions-of-the-Learner) An innovative research programme was devised to investigate the interactive effect of instructional strategies, enhanced with text-plus-textual metaphors or text-plus-graphical metaphors, and cognitive style, on the acquisition of a special category of abstract (process) programming concept. This type of concept was chosen to focus on the role of analogic knowledge involved in computer programming. The results are discussed within the context of the internal/external exchange process, drawing on Ritchey's (1980) concepts of within-item and between-item encoding elaborations. The methodology developed for the doctoral project integrates earlier research knowledge in a novel, interdisciplinary, conceptual framework, including: from instructional science in the USA, for the concept learning models; British cognitive psychology and human memory research, for defining the cognitive style construct; and Australian educational research, to provide the measurement tools for instructional outcomes. The experimental design consisted of a screening test to determine cognitive style, a pretest to determine prior domain knowledge in abstract programming knowledge elements, the instruction period, and a post-test to measure improved performance. This research design provides a three-level discovery process to articulate: 1) the fusion of strategic knowledge required by the novice learner for dealing with contexts within instructional strategies 2) acquisition of knowledge using measurable instructional outcome and learner characteristics 3) knowledge of the innate environmental factors which influence the instructional outcomes This research has successfully identified the interactive effect of instructional strategy, within an individual's cognitive style construct, in their acquisition of complex programming concepts. However, the significance of the three-level discovery process lies in the scope of the methodology to inform the design of a meta-knowledge processing model for instructional science. Firstly, the British cognitive style testing procedure, is a low cost, user friendly, computer application that effectively measures an individual's position on the two cognitive style continua (Riding & Cheema,1991). Secondly, the QUEST Interactive Test Analysis System (Izard,1995), allows for a probabilistic determination of an individual's knowledge level, relative to other participants, and relative to test-item difficulties. Test-items can be related to skill levels, and consequently, can be used by instructional scientists to measure knowledge acquisition. Finally, an Effect Size Analysis (Cohen,1977) allows for a direct comparison between treatment groups, giving a statistical measurement of how large an effect the independent variables have on the dependent outcomes. Combined with QUEST's hierarchical positioning of participants, this tool can assist in identifying preferred learning conditions for the evaluation of treatment groups. By combining these three assessment analysis tools into instructional research, a computerized learning shell, customised for individuals' cognitive constructs can be created (McKay & Garner,1999). While this approach has widespread application, individual researchers/trainers would nonetheless, need to validate with an extensive pilot study programme (McKay,1999a; McKay,1999b), the interactive effects within their specific learning domain. Furthermore, the instructional material does not need to be limited to a textual/graphical comparison, but could be applied to any two or more instructional treatments of any kind. For instance: a structured versus exploratory strategy. The possibilities and combinations are believed to be endless, provided the focus is maintained on linking of the front-end identification of cognitive style with an improved performance outcome. My in-depth analysis provides a better understanding of the interactive effects of the cognitive style construct and instructional format on the acquisition of abstract concepts, involving spatial relations and logical reasoning. In providing the basis for a meta-knowledge processing model, this research is expected to be of interest to educators, cognitive psychologists, communications engineers and computer scientists specialising in computer-human interactions.

Hierarchical topical segmentation in instructional films based on cinematic expressive functions

In this paper, we propose a novel solution for segmenting an instructional video into hierarchical topical sections. Incorporating the knowledge of education-oriented film theory with our previous study of expressive functions namely the content density and the thematic functions, we develop an algorithm to effectively structuralize an instructional video into a two-tiered hierarchy of topical sections at the main and sub-topic levels. Our experimental results on a set of ten industrial instructional videos demonstrate the validity of the detection scheme.

High level segmentation of instructional videos based on content density

Automatically partitioning instructional videos into topic sections is a challenging problem in e-learning environments for efficient content management and cataloging. This paper addresses this problem by proposing a novel density function to delineate sections underscored by changes in topics in instructional and training videos. The content density function draws guidance from the observation that topic boundaries coincide with the ebb and flow of the 'density' of content shown in these videos. Based on this function, we propose two methods for high-level segmentation by determining topic boundaries. We study the performance of the two methods on eight training videos, and our experimental results demonstrate the effectiveness and robustness of the two proposed high-level segmentation algorithms for learning media.

Infusing instructional design principles into an active student-centred social learning framework

Social and participatory media offer a plethora of ways for students to communicate, collaborate, and learn in schools. Using a social learning approach, Casey (2013a) investigated ways that social media could be integrated into Australian public high school classrooms to enhance student learning. In the process, she developed a social learning framework as discussed in Casey (2013b). Similarly, Davidson-Shivers and Hulon (2013; Hulon & Daidson-Shivers, 2013) suggest ways to employ ID principles to prepare college instructors and pre-service teachers to integrate technology into classrooms. Prior to that, Davidson-Shivers with Rasmussen (2006) developed an instructional design (ID) model for creating effective Web-based learning environments. Through collaboration, Casey and Davidson-Shivers consider a wide range of social learning and instructional design principles and approaches to help develop frameworks for new media integration that can work within varying levels of education.

Curricular Integration of Simulations in Neuroscience - Instructional and Technical Perspectives

In recent years interactive media and tools, like scientific simulations and simulation environments or dynamic data visualizations, became established methods in the neural and cognitive sciences. Hence, university teachers of neural and cognitive sciences are faced with the challenge to integrate these media into the neuroscientific curriculum. Especially simulations and dynamic visualizations offer great opportunities for teachers and learners, since they are both illustrative and explorable. However, simulations bear instructional problems: they are abstract, demand some computer skills and conceptual knowledge about what simulations intend to explain. By following two central questions this article provides an overview on possible approaches to be applied in neuroscience education and opens perspectives for their curricular integration: (i) How can complex scientific media be transformed for educational use in an efficient and (for students on all levels) comprehensible manner and (ii) by what technical infrastructure can this transformation be supported? Exemplified by educational simulations for the neurosciences and their application in courses, answers to these questions are proposed a) by introducing a specific educational simulation approach for the neurosciences b) by introducing an e-learning environment for simulations, and c) by providing examples of curricular integration on different levels which might help academic teachers to integrate newly created or existing interactive educational resources in their courses.