Brain endothelial PPARgamma controls inflammation-induced CD4+ T cell adhesion and transmigration in vitro

An important step in the pathogenesis of multiple sclerosis is adhesion and transmigration of encephalitogenic T cells across brain endothelial cells (EC) which strongly relies on interaction with EC-expressed adhesion molecules. We provide molecular evidence that the transcription factor peroxisome proliferator-activated receptor gamma (PPARgamma) is a negative regulator of brain EC inflammation. The PPARgamma agonist pioglitazone reduces transendothelial migration of encephalitogenic T cells across TNFalpha-stimulated brain EC. This effect is clearly PPARgamma mediated, as lentiviral PPARgamma overexpression in brain EC results in selective abrogation of inflammation-induced ICAM-1 and VCAM-1 upregulation and subsequent adhesion and transmigration of T cells. We therefore propose that PPARgamma in brain EC may be exploited to target detrimental EC-T cell interactions under inflammatory conditions.

Short- and long-term mortality and causes of death in HIV/tuberculosis patients in Europe

Mortality of HIV/tuberculosis (TB) patients in Eastern Europe is high. Little is known about their causes of death. This study aimed to assess and compare mortality rates and cause of death in HIV/TB patients across Eastern Europe and Western Europe and Argentina (WEA) in an international cohort study. Mortality rates and causes of death were analysed by time from TB diagnosis (<3 months, 3-12 months or >12 months) in 1078 consecutive HIV/TB patients. Factors associated with TB-related death were examined in multivariate Poisson regression analysis. 347 patients died during 2625 person-years of follow-up. Mortality in Eastern Europe was three- to ninefold higher than in WEA. TB was the main cause of death in Eastern Europe in 80%, 66% and 61% of patients who died <3 months, 3-12 months or >12 months after TB diagnosis, compared to 50%, 0% and 15% in the same time periods in WEA (p<0.0001). In multivariate analysis, follow-up in WEA (incidence rate ratio (IRR) 0.12, 95% CI 0.04-0.35), standard TB-treatment (IRR 0.45, 95% CI 0.20-0.99) and antiretroviral therapy (IRR 0.32, 95% CI 0.14-0.77) were associated with reduced risk of TB-related death. Persistently higher mortality rates were observed in HIV/TB patients in Eastern Europe, and TB was the dominant cause of death at any time during follow-up. This has important implications for HIV/TB programmes aiming to optimise the management of HIV/TB patients and limit TB-associated mortality in this region.

International Clostridium difficile animal strain collection and large diversity of animal associated strains

BACKGROUND Clostridium difficile is an important cause of intestinal infections in some animal species and animals might be a reservoir for community associated human infections. Here we describe a collection of animal associated C. difficile strains from 12 countries based on inclusion criteria of one strain (PCR ribotype) per animal species per laboratory. RESULTS Altogether 112 isolates were collected and distributed into 38 PCR ribotypes with agarose based approach and 50 PCR ribotypes with sequencer based approach. Four PCR ribotypes were most prevalent in terms of number of isolates as well as in terms of number of different host species: 078 (14.3% of isolates; 4 hosts), 014/020 (11.6%; 8 hosts); 002 (5.4%; 4 hosts) and 012 (5.4%; 5 hosts). Two animal hosts were best represented; cattle with 31 isolates (20 PCR ribotypes; 7 countries) and pigs with 31 isolates (16 PCR ribotypes; 10 countries). CONCLUSIONS This results show that although PCR ribotype 078 is often reported as the major animal C. difficile type, especially in pigs, the variability of strains in pigs and other animal hosts is substantial. Most common human PCR ribotypes (014/020 and 002) are also among most prevalent animal associated C. difficile strains worldwide. The widespread dissemination of toxigenic C. difficile and the considerable overlap in strain distribution between species furthers concerns about interspecies, including zoonotic, transmission of this critically important pathogen.

Breve nota sobre a etimologia de Dioniso

This article aims chiefly to discuss the status quaestionis regarding the etymology of Dionysus. The main theories thereon are analyzed and a new connection is put forward between the name of the god and one of his characteristic activities -dancing. In view of this, some passages of the Rig Veda are pointed out which might strengthen the bond already suggested between Dionysus and the god Indra within the Indo-European tradition

Breve nota sobre a etimologia de Dioniso

This article aims chiefly to discuss the status quaestionis regarding the etymology of Dionysus. The main theories thereon are analyzed and a new connection is put forward between the name of the god and one of his characteristic activities -dancing. In view of this, some passages of the Rig Veda are pointed out which might strengthen the bond already suggested between Dionysus and the god Indra within the Indo-European tradition

Breve nota sobre a etimologia de Dioniso

This article aims chiefly to discuss the status quaestionis regarding the etymology of Dionysus. The main theories thereon are analyzed and a new connection is put forward between the name of the god and one of his characteristic activities -dancing. In view of this, some passages of the Rig Veda are pointed out which might strengthen the bond already suggested between Dionysus and the god Indra within the Indo-European tradition

Benthic and fish community composition as well as water quality along the Thousand Islands north of the megacity Jakarta, Indonesia

Worldwide, coral reefs are challenged by multiple stressors due to growing urbanization, industrialization and coastal development. Coral reefs along the Thousand Islands off Jakarta, one of the largest megacities worldwide, have degraded dramatically over recent decades. The shift and decline in coral cover and composition has been extensively studied with a focus on large-scale gradients (i.e. regional drivers), however special focus on local drivers in shaping spatial community composition is still lacking. Here, the spatial impact of anthropogenic stressors on local and regional scales on coral reefs north of Jakarta was investigated. Results indicate that the direct impact of Jakarta is mainly restricted to inshore reefs, separating reefs in Jakarta Bay from reefs along the Thousand Islands further north. A spatial patchwork of differentially degraded reefs is present along the islands as a result of localized anthropogenic effects rather than regional gradients. Pollution is the main anthropogenic stressor, with over 80 % of variation in benthic community composition driven by sedimentation rate, NO2, PO4 and Chlorophyll a. Thus, the spatial structure of reefs is directly related to intense anthropogenic pressure from local as well as regional sources. Therefore, improved spatial management that accounts for both local and regional stressors is needed for effective marine conservation.

Desarrollo de un datalink con el chip CC1110 de Texas Instruments para UAVs

Se trata de estudiar el comportamiento de un sistema basado en el chip CC1110 de Texas Instruments, para aplicaciones inalámbricas. Los dispositivos basados en este tipo de chips tienen actualmente gran profusión, dada la demanda cada vez mayor de aplicaciones de gestión y control inalámbrico. Por ello, en la primera parte del proyecto se presenta el estado del arte referente a este aspecto, haciendo mención a los sistemas operativos embebidos, FPGAs, etc. También se realiza una introducción sobre la historia de los aviones no tripulados, que son el vehículo elegido para el uso del enlace de datos. En una segunda parte se realiza el estudio del dispositivo mediante una placa de desarrollo, verificando y comprobando mediante el software suministrado, el alcance del mismo. Cabe resaltar en este punto que el control con la placa mencionada se debe hacer mediante programación de bajo nivel (lenguaje C), lo que aporta gran versatilidad a las aplicaciones que se pueden desarrollar. Por ello, en una tercera parte se realiza un programa funcional, basado en necesidades aportadas por la empresa con la que se colabora en el proyecto (INDRA). Este programa es realizado sobre el entorno de Matlab, muy útil para este tipo de aplicaciones, dada su versatilidad y gran capacidad de cálculo con variables. Para terminar, con la realización de dichos programas, se realizan pruebas específicas para cada uno de ellos, realizando pruebas de campo en algunas ocasiones, con vehículos los más similares a los del entorno real en el que se prevé utilizar. Como implementación al programa realizado, se incluye un manual de usuario con un formato muy gráfico, para que la toma de contacto se realice de una manera rápida y sencilla. Para terminar, se plantean líneas futuras de aplicación del sistema, conclusiones, presupuesto y un anexo con los códigos de programación más importantes. Abstract In this document studied the system behavior based on chip CC1110 of Texas Instruments, for wireless applications. These devices currently have profusion. Right the increasing demand for control and management wireless applications. In the first part of project presents the state of art of this aspect, with reference to the embedded systems, FPGAs, etc. It also makes a history introduction of UAVs, which are the vehicle for use data link. In the second part is studied the device through development board, verifying and checking with provided software the scope. The board programming is C language; this gives a good versatility to develop applications. Thus, in third part performing a functionally program, it based on requirements provided by company with which it collaborates, INDRA Company. This program is developed with Matlab, very useful for such applications because of its versatility and ability to use variables. Finally, with the implementation of such programs, specific tests are performed for each of them, field tests are performed in several cases, and vehicles used for this are the most similar to the actual environment plain to use. Like implementing with the program made, includes a graphical user manual, so your understanding is conducted quickly and easily. Ultimately, present future targets for system applications, conclusions, budget and annex of the most important programming codes.

Agile Construction and Evolution of Product-Line Architectures

Software Product Line Engineering (SPLE) has proved to have significant advantages in family-based software development, but also implies the up¬front design of a product-line architecture (PLA) from which individual product applications can be engineered. The big upfront design associated with PLAs is in conflict with the current need of "being open to change". However, the turbulence of the current business climate makes change inevitable in order to stay competitive, and requires PLAs to be open to change even late in the development. The trend of "being open to change" is manifested in the Agile Software Development (ASD) paradigm, but it is spreading to the domain of SPLE. To reduce the big upfront design of PLAs as currently practiced in SPLE, new paradigms are being created, one being Agile Product Line Engineering (APLE). APLE aims to make the development of product-lines more flexible and adaptable to changes as promoted in ASD. To put APLE into practice it is necessary to make mechanisms available to assist and guide the agile construction and evolution of PLAs while complying with the "be open to change" agile principle. This thesis defines a process for "the agile construction and evolution of product-line architectures", which we refer to as Agile Product-Line Archi-tecting (APLA). The APLA process provides agile architects with a set of models for describing, documenting and tracing PLAs, as well as an algorithm to analyze change impact. Both the models and the change impact analysis offer the following capabilities: Flexibility & adaptability at the time of defining software architectures, enabling change during the incremental and iterative design of PLAs (anticipated or planned changes) and their evolution (unanticipated or unforeseen changes). Assistance in checking architectural integrity through change impact analysis in terms of architectural concerns, such as dependencies on earlier design decisions, rationale, constraints, and risks, etc.Guidance in the change decision-making process through change im¬pact analysis in terms of architectural components and connections. Therefore, APLA provides the mechanisms required to construct and evolve PLAs that can easily be refined iteration after iteration during the APLE development process. These mechanisms are provided in a modeling frame¬work called FPLA. The contributions of this thesis have been validated through the conduction of a project regarding a metering management system in electrical power networks. This case study took place in an i-smart software factory and was in collaboration with the Technical University of Madrid and Indra Software Labs. La Ingeniería de Líneas de Producto Software (Software Product Line Engi¬neering, SPLE) ha demostrado tener ventajas significativas en el desarrollo de software basado en familias de productos. SPLE es un paradigma que se basa en la reutilización sistemática de un conjunto de características comunes que comparten los productos de un mismo dominio o familia, y la personalización masiva a través de una variabilidad bien definida que diferencia unos productos de otros. Este tipo de desarrollo requiere el diseño inicial de una arquitectura de línea de productos (Product-Line Architecture, PLA) a partir de la cual los productos individuales de la familia son diseñados e implementados. La inversión inicial que hay que realizar en el diseño de PLAs entra en conflicto con la necesidad actual de estar continuamente "abierto al cam¬bio", siendo este cambio cada vez más frecuente y radical en la industria software. Para ser competitivos es inevitable adaptarse al cambio, incluso en las últimas etapas del desarrollo de productos software. Esta tendencia se manifiesta de forma especial en el paradigma de Desarrollo Ágil de Software (Agile Software Development, ASD) y se está extendiendo también al ámbito de SPLE. Con el objetivo de reducir la inversión inicial en el diseño de PLAs en la manera en que se plantea en SPLE, en los último años han surgido nuevos enfoques como la Ingeniera de Líneas de Producto Software Ágiles (Agile Product Line Engineering, APLE). APLE propone el desarrollo de líneas de producto de forma más flexible y adaptable a los cambios, iterativa e incremental. Para ello, es necesario disponer de mecanismos que ayuden y guíen a los arquitectos de líneas de producto en el diseño y evolución ágil de PLAs, mientras se cumple con el principio ágil de estar abierto al cambio. Esta tesis define un proceso para la "construcción y evolución ágil de las arquitecturas de lineas de producto software". A este proceso se le ha denominado Agile Product-Line Architecting (APLA). El proceso APLA proporciona a los arquitectos software un conjunto de modelos para de¬scribir, documentar y trazar PLAs, así como un algoritmo para analizar vel impacto del cambio. Los modelos y el análisis del impacto del cambio ofrecen: Flexibilidad y adaptabilidad a la hora de definir las arquitecturas software, facilitando el cambio durante el diseño incremental e iterativo de PLAs (cambios esperados o previstos) y su evolución (cambios no previstos). Asistencia en la verificación de la integridad arquitectónica mediante el análisis de impacto de los cambios en términos de dependencias entre decisiones de diseño, justificación de las decisiones de diseño, limitaciones, riesgos, etc. Orientación en la toma de decisiones derivadas del cambio mediante el análisis de impacto de los cambios en términos de componentes y conexiones. De esta manera, APLA se presenta como una solución para la construcción y evolución de PLAs de forma que puedan ser fácilmente refinadas iteración tras iteración de un ciclo de vida de líneas de producto ágiles. Dicha solución se ha implementado en una herramienta llamada FPLA (Flexible Product-Line Architecture) y ha sido validada mediante su aplicación en un proyecto de desarrollo de un sistema de gestión de medición en redes de energía eléctrica. Dicho proyecto ha sido desarrollado en una fábrica de software global en colaboración con la Universidad Politécnica de Madrid e Indra Software Labs.

Implementación de un simulador de cobertura de red

La presente memoria es el resultado de un proyecto cuya finalidad, como su título propiamente indica, es la implementación de un simulador de cobertura de red para la unidad de testing de movilidad de Indra Sistemas S.A. Dentro de las diferentes ramas del testing se encuentran las pruebas del software sobre diferentes entornos de red para comprobar como responden ante ellos. Hoy en dia podemos encontrarnos con diferentes velocidades de conexión móviles dependiendo de múltiples factores : ocupación de las células, geografía del terreno, operador que suministra el servicio, tecnología del móvil que se esté usando etc. Es ahí donde se llevaran a cabo los estudios que se realizarán en este trabajo de fin de grado, donde se podrán simular las condiciones de red para realizar pruebas de diversos tipos de software. El mundo de la simulación de condiciones de red aún no ha comenzado a desarrollarse plenamente. Existen alternativas comerciales, como las de HP o Experitest, pero están en estado temprano de desarrollo, con muchos fallos y cuyas versiones no de prueba cuestan miles de dolares. En el trabajo se estudian las diversas opciones, tanto comerciales como de desarrollo propio, indicando pros y contras en cada caso. De entre esas opciones se elegirá una y con ella se acometerán y analizarán estudios de rendimiento.