Transonic wind tunnel for investigation of turbomachinery blades

The design of a two-stream wind tunnel was undertaken to allow the simulation and study of certain features of the flow field around the blades of high-speed axial-flow turbomachineries. The mixing of the two parallel streams with designed Mach numbers respectively equal to 1.4 and 0.7 will simulate the transonic Mach number distribution generally obtained along the tips of the first stage blades in large bypass-fan engines.

The GALCIT hypersonic compressor plant will be used as an air supply for the wind tunnel, and consequently the calculations contained in the first chapter are derived from the characteristics and the performance of this plant.

The transonic part of the nozzle is computed by using a method developed by K. O. Friedrichs. This method consists essentially of expanding the coordinates and the characteristics of the flow in power series. The development begins with prescribing, more or less arbitrarily, a Mach number distribution along the centerline of the nozzle. This method has been programmed for an IBM 360 computer to define the wall contour of the nozzle.

A further computation is carried out to correct the contour for boundary layer buildup. This boundary layer analysis included geometry, pressure gradient, and Mach number effects. The subsonic nozzle is calculated {including boundary layer buildup) by using the same computer programs. Finally, the mixing zone downstream of the splitter plate was investigated to prescribe the wall contour correction necessary to ensure a constant-pressure test section.

Determination of optimal trajectory under design constraints for a satellite launch vehicle

An optimal pitch steering programme of a solid-fuel satellite launch vehicle to maximize either (1) the injection velocity at a given altitude, or (2) the size of circular orbit, for a given payload is presented. The two-dimensional model includes the rotation of atmosphere with the Earth, the vehicle's lift and drag, variation of thrust with time and altitude, inverse-square gravitational field, and the specified initial vertical take-off. The inequality constraints on the aerodynamic load, control force, and turning rates are also imposed. Using the properties of the central force motion the terminal constraint conditions at coast apogee are transferred to the penultimate stage burnout. Such a transformation converts a time-free problem into a time-fixed one, reduces the number of terminal constraints, improves accuracy, besides demanding less computer memory and time. The adjoint equations are developed in a compact matrix form. The problem is solved on an IBM 360/44 computer using a steepest ascent algorithm. An illustrative analysis of a typical launch vehicle establishes the speed of convergence, and accuracy and applicability of the algorithm.

A New Liquid Level Sensor for Process-Control Applications

Many process-control systems are air-operated. In such an environment, it would be desirable and economical to use pneumatic sensors. Bubble-back pressure sensors perform quite satisfactorily, but in case of viscous inflammable and slurry-like liquids with a tendency to froth, this level sensor is inadequate. The method suggested in this paper utilizes a pneumatic capacitor, one boundary of which is formed by the liquid level, to modulate a fluid amplifier feedback oscillator. The absence of moving parts and economy obtained makes this method attractive for process-control applications. The system has been mathematically modeled and simulated on an IBM 360/44 digital computer. Experimental values compare fairly well with the theoretical results. For the range tested, the sensor is found to have a linear frequency variation with the liquid level Extended running in the laboratory shows that the system is very reliable. This system has been found insensitive to temperature variations of up to 15ðC.

Assessing Needs for Computer Pest Management Software in Nebraska Agriculture

A mail survey was conducted to assess current computer hardware use and perceived needs of potential users for software related to crop pest management in Nebraska. Surveys were sent to University of Nebraska-Lincoln agricultural extension agents, agribusiness personnel (including independent crop consultants), and crop producers identified by extension agents as computer users. There were no differences between the groups in several aspects of computer hardware use (percentage computer use, percentage IBM-compatible computer, amount of RAM memory, percentage with hard drive, hard drive size, or monitor graphics capability). Responses were similar among the three groups in several areas that are important to crop pest management (pest identification, pest biology, treatment decision making, control options, and pesticide selection), and a majority of each group expressed the need for additional sources of such information about insects, diseases, and weeds. However, agents mentioned vertebrate pest management information as a need more often than the other two groups. Also, majorities of each group expressed an interest in using computer software, if available, to obtain information in these areas. Appropriate software to address these needs should find an audience among all three groups.

The detection of interaction effects ; a report on a computer program for the selection of optimal combinations of explanatory variables /

Errata sheet inserted.

Varities of National Metonymy in Media Accounts of International Mergers and Acquisitions

International mergers and acquisitions (M&As) often invoke national identification and national cultural differences. We argue that metonymy is a central linguistic resource through which national cultural identities and differences are reproduced in media accounts of international M&As. In this paper, we focus on two revealing cases: the acquisition of American IBM Personal Computer Division (PCD) by the Chinese company Lenovo and the acquisition of American Anheuser-Busch (A-B) by the Belgian-Brazilian company InBev. First, we identify the forms, functions and frequencies of national metonymy in media accounts of these cases. We present a typology that classifies varieties of national metonymy in international M&As. Second, we demonstrate how these metonyms combine with metaphor to generate evocative imagery, engaging wit, and subversive irony. Our findings show that national metonymy contributes to the construction of emotive frames, stereotypes, ideological differences, and threats. Combinations of national metonymy with metaphor also provide powerful means to construct cultural differences. However, combinations of metonymy with wit and irony enable the play on meanings that overturns and resists national and cultural stereotypes. This is the first study to unpack the deployment of metonymy in accounts of international M&As. In doing so, it also opens up new avenues for research into international management and the analysis of tropes in management and organization.

Part I - The radiation of elastic waves from a spherical cavity in a half space. Part II - Precision determination of focal depths and epicenters of earthquakes.

Part I: The dynamic response of an elastic half space to an explosion in a buried spherical cavity is investigated by two methods. The first is implicit, and the final expressions for the displacements at the free surface are given as a series of spherical wave functions whose coefficients are solutions of an infinite set of linear equations. The second method is based on Schwarz's technique to solve boundary value problems, and leads to an iterative solution, starting with the known expression for the point source in a half space as first term. The iterative series is transformed into a system of two integral equations, and into an equivalent set of linear equations. In this way, a dual interpretation of the physical phenomena is achieved. The systems are treated numerically and the Rayleigh wave part of the displacements is given in the frequency domain. Several comparisons with simpler cases are analyzed to show the effect of the cavity radius-depth ratio on the spectra of the displacements.

Part II: A high speed, large capacity, hypocenter location program has been written for an IBM 7094 computer. Important modifications to the standard method of least squares have been incorporated in it. Among them are a new way to obtain the depth of shocks from the normal equations, and the computation of variable travel times for the local shocks in order to account automatically for crustal variations. The multiregional travel times, largely based upon the investigations of the United States Geological Survey, are confronted with actual traverses to test their validity.

It is shown that several crustal phases provide control enough to obtain good solutions in depth for nuclear explosions, though not all the recording stations are in the region where crustal corrections are considered. The use of the European travel times, to locate the French nuclear explosion of May 1962 in the Sahara, proved to be more adequate than previous work.

A simpler program, with manual crustal corrections, is used to process the Kern County series of aftershocks, and a clearer picture of tectonic mechanism of the White Wolf fault is obtained.

Shocks in the California region are processed automatically and statistical frequency-depth and energy depth curves are discussed in relation to the tectonics of the area.

TEMPEST: A Template Editor for Structured Text

TEMPEST is a full-screen text editor that incorporates a structural paradigm in addition to the more traditional textual paradigm provided by most editors. While the textual paradigm treats the text as a sequence of characters, the structural paradigm treats it as a collection of named blocks which the user can define, group, and manipulate. Blocks can be defined to correspond to the structural features of he text, thereby providing more meaningful objects to operate on than characters of lines. The structural representation of the text is kept in the background, giving TEMPEST the appearance of a typical text editor. The structural and textual interfaces coexist equally, however, so one can always operate on the text from wither point of view. TEMPEST's representation scheme provides no semantic understanding of structure. This approach sacrifices depth, but affords a broad range of applicability and requires very little computational overhead. A prototype has been implemented to illustrate the feasibility and potential areas of application of the central ideas. It was developed and runs on an IBM Personal Computer.

Investigation of the effects of microcomputers on the work of professional accountants

Information technology research over the past two decades suggests that the installation and use of computers fundamentally affects the structure and function of organisations and, m particular, the workers in these organizations. Following the release of the IBM Personal Computer in 1982, microcomputers have become an integral part of most work environments. The accounting services industry, in particular, has felt the impact of this ‘microcomputer revolution’. In Big Six accounting firms, there is almost one microcomputer for each professional accountant employed, Notwithstanding this, little research has been done on the effect of microcomputers on the work outcomes of professional accountants working in these firms. This study addresses this issue. It assesses, in an organisational setting, how accountant’ perceptions of ease of use and usefulness of microcomputers act on their computer anxieties, microcomputer attitudes and use to affect their job satisfaction and job performance. The research also examines how different types of human-computer interfaces affect the relationships between accountants' beliefs about microcomputer utility and ease of use, computer anxiety, microcomputer attitudes and microcomputer use. To attain this research objective, a conceptual model was first developed, The model indicates that work outcomes (job satisfaction and job performance) of professional accountants using microcomputers are influenced by users' perceptions of ease of use and usefulness of microcomputers via paths through (a) the level of computer anxiety experienced by users, (b) the general attitude of users toward using microcomputers, and (c) the extent to which microcomputers are used by individuals. Empirically testable propositions were derived from the model to test the postulated relationships between these constructs. The study also tested whether or not users of different human-computer interfaces reacted differently to the perceptions and anxieties they hold about microcomputers and their use in the workplace. It was argued that users of graphical interfaces, because of the characteristics of those interfaces, react differently to their perceptions and anxieties about microcomputers compared with users of command-line (or textual-based) interfaces. A passive-observational study in a field setting was used to test the model and the research propositions. Data was collected from 164 professional accountants working in a Big Six accounting firm in a metropolitan city in Australia. Structural equation modelling techniques were used to test the, hypothesised causal relationships between the components comprising the general research model. Path analysis and ordinary least squares regression was used to estimate the parameters of the model and analyse the data obtained. Multisample analysis (or stacked model analysis) using EQS was used to test the fit of the model to the data of the different human-computer interface groups and to estimate the parameters for the paths in those different groups. The results show that the research model is a good description of the data. The job satisfaction of professional accountants is directly affected by their attitude toward using microcomputers and by microcomputer use itself. However, job performance appears to be only directly affected by microcomputer attitudes. Microcomputer use does not directly affect job performance. Along with perceived ease of use and perceived usefulness, computer anxiety is shown to be an important determinant of attitudes toward using microcomputers - higher levels of computer anxiety negatively affect attitudes toward using microcomputers. Conversely, higher levels of perceived ease of use and perceived usefulness heighten individuals' positive attitudes toward using microcomputers. Perceived ease of use and perceived usefulness also indirectly affect microcomputer attitudes through their effect on computer anxiety. The results show that higher levels of perceived ease of use and perceived usefulness result in lower levels of computer anxiety. A surprising result from the study is that while perceived ease of use is shown to directly affect the level of microcomputer usage, perceived usefulness and attitude toward using microcomputers does not. The results of the multisample analysis confirm that the research model fits the stacked model and that the stacked model is a significantly better fit if specific parameters are allowed to vary between the two human-computer interface user groups. In general, these results confirm that an interaction exists between the type of human-computer interface (the variable providing the grouping) and the other variables in the model The results show a clear difference between the two groups in the way in which perceived ease of use and perceived usefulness affect microcomputer attitude. In the case of users of command-line interfaces, these variables appear to affect microcomputer attitude via an intervening variable, computer anxiety, whereas in the graphical interface user group the effect occurs directly. Related to this, the results show that perceived ease of use and perceived usefulness have a significant direct effect on computer anxiety in command-line interface users, but no effect at all for graphical interface users. Of the two exogenous variables only perceived ease of use, and that in the case of the command-line interface users, has a direct significant effect on extent of use of microcomputers. In summary, the research has contributed to the development of a theory of individual adjustment to information technology in the workplace. It identifies certain perceptions, anxieties and attitudes about microcomputers and shows how they may affect work outcomes such as job satisfaction and job performance. It also shows that microcomputer-interface types have a differential effect on some of the hypothesised relationships represented in the general model. Future replication studies could sample a broader cross-section of the microcomputer user community. Finally, the results should help Big Six accounting firms to maximise the benefits of microcomputer use by making them aware of how working with microcomputers affects job satisfaction and job performance.

Interpretação de perfis dos carbonatos fraturados da Bacia do Pará-Maranhão

A finalidade deste trabalho é apresentar um estudo de caso dos carbonatos terciários da bacia do Pará-Maranhão, do ponto de vista da interpretação dos perfis registrados nessa área. Dois poços-chave, X e Y, foram escolhidos para o estudo. O tratamento dos dados foi realizado utilizando os recursos do programa LOGCALC, instalado no computador IBM-3090, da Petrobrás, e, também, o sistema DLPS, instalado no VAX-8600, da Universidade Federal de Pará. A avaliação da porosidade e, principalmente, das saturações, é dificultada pelas características não-convencionais dos carbonatos. A litologia é complexa, a salinidade da água de formação é relativamente baixa, em torno de 10.000 ppm de NaCl, a densidade das rochas é elevada e os carbonatos estão fraturados. Para diminuir o efeito da composição mineralógica, foi necessário discriminar os diferentes tipos litológicos. Três tipos de carbonatos foram identificados: calcário, calcário arenoso e calcário dolomitizado. A identificação litológica permite maior controle dos parâmetros da matriz e dos expoentes de porosidade das rochas, conduzindo a estimativas de porosidade e de saturações mais confiáveis. A presença de fraturas influencia, marcadamente, a resposta dos perfis, conforme pode ser notado no perfil de identificação de fraturas, nos perfis de resistividade, de densidade e na curva de raios-gama espectral do poço X. O expoente de porosidade, m, tomado do gráfico de Pickett, é frequentemente inferior a 1,5, valor considerado inerente a rochas fraturadas. Os modelos de Rasmus (1983) e de Porter et al.(1969), foram testados para calcular as saturações de água e óleo. A equação tradicional de Archie (1942), com a e m apropriados, também foi aplicada neste trabalho. O esquema para estimativa de saturações que conduz a resultados mais coerentes com os dados dos testes de formação, nos intervalos fraturados, é a saturação de Rasmus, calculada com a relação de Archie aplicada com o expoente de porosidade variável, tomado do modelo de Rasmus.

Monitoring of industrial exposure for chloracne

This study (1) established comedogenicity dose response curves for the pure compounds of 3,3$\sp\prime$,4,4$\sp\prime$-tetrachloroazobenzene (TCAB) and 3,3$\sp\prime$,4,4$\sp\prime$-tetrachloroazoxybenzene (TCAOB) individually and as a couple-compound using a rabbit ear model; (2) used a rabbit ear model to establish comedogenicity potential for TCAB and TCAOB as they existed in a given industrial herbicide manufacture process; (3) evaluated actual environmental contamination in a herbicide industrial setting by air monitoring and wipe sampling; (4) biologically monitored potentially exposed workers for alterations in follicular orifice size as an index of actual exposure to chloracnegenic compounds; and (5) biologically monitored potentially exposed workers for changes in weight, cholesterol, triglycerides and blood sugar.^ A silastic monomer mold (an objective measure) was used to measure change in follicular orifice size over time. This required taking impressions of (1) skin of the forehead and right and left malar crescents of workers and (2) the skin of the external ear of the rabbit. Molds were stained using a solution of hematoxylin and digitized using a Nikon UFX microscope (magnification 300 X), a drawing tube and a digitizing tablet attached to an IBM Personal Computer. Comedogenicity assays were used to establish dose-response curves for TCAB, TCAOB and the couple-compound TCAB + TCAOB.^ No evidence of chloracne or toxicity was observed in any of the workers. Nor, was there a statistically significant increase in size of follicular orifice means measured over time. This was attributed to extensive personal and environmental hygiene programs along with teaching the workers about chloracne, its cause and its prevention. These programs may have been the greatest factor in preventing the development of chloracne in this group of workers. Monitoring of the plant environment showed relatively high concentrations of the couple-compound (TCAB + TCAOB). Comedogenicity assays showed a linear dose-response relationship over time for TCAB, TCAOB and the couple-compound. An antagonistic action was found for the TCAB/TCAOB of the couple-compound; such action may provide some protection to workers in this type of setting. It is speculated that the observed antagonistic action may be due to the difference in binding affinities of TCAB/TCAOB for receptor sites. ^

Programmation de L'algorithme de synthese de Gloushkov pour les tables de fluence des systemes sequentiels

A l'origine nous nous avions proposé programmer sur CAB-5DO la méthode de synthèse de Gloushkov pour la classe des automates asynchrones du type machine transfert, d'où le titre de la thèse. A sa place nous avons resous le même problême â l'aide d'une méthode algorihmique originale» Après une introduction on définit la nouvelle méthode, valable pour les machines asynchrones, ainsi que quelques propriétés intéréssantés des expressions itérées ( en particulier de l'événement universel )» Dans la suite on établit les organigrammes générales de synthèse et l'organisation du travail sur machine. Après la conclusion, où l'on résume les avantages de nôtre méthode, il y a txoisPnnexes, dans le premier desquels on fait d'une façon pratique le point sur ces avantages par rapport à la méthode de Gloushkov f dans.le deuxième on groupe des organigrammes très détaillés, les programmes correspondants et quelques résultats > et dans le troisième le programme traduit en fortran IV qui a été mis au point sur le calculateur IBM 360/44 du l . E. R. A. ( Centre d'Etudes et Récherches en Automatisme).

The ALCOR-Illinois-7090 post-mortem dump: description and imbedding instructions /

Bibliography: p. 17.

Illinois waterborne shipping database /

"...also available...in soft copy for operating on either an IBM-compatible computer or Wang word processor." -- P. i.

Program Trixy : multi-group analysis of nuclear reactors in three space dimensions : for the IBM type 704 computer /

"Physics and Math. TID-4500 (15th Ed.)"--Title page.