A Study of a Carbonaceous Gold Ore

The presence of graphite in the ore of the Missouri-McKee Mine has made its treatment by the methods now used quite unsatisfactory. The study was undertaken to de­velop a new flow sheet which would give a high recovery and yet be economical enough to handle low grade material.

The Geology and Ore Deposits of the Ruby Gulch Mine

The Ruby Gulch Mine, owned and operated by the Ruby Gulch Mining Company, Zortman, Montana, is one of the most important low-grade gold producers in the state. Sit­uated in the Little Rocky Mountains, the mine has had an interesting history since its discovery shortly before the turn of the century.

Geology and Ore Deposits of the Salt Chuck-Rush and Brown Mine Area Prince of Wales Island, Alaska

The Salt Chuck, Rush and Brown, and adjacent mines and claims form an area of approximately 15 square miles near the head of Kasaan Bay about 10 miles northwest of the village of Kasaan on Prince of Wales Island in southeastern Alaska. It is an area of moderate relief in which the hills rise from the water’s edge to heights of some 500 feet. Most of the area is covered with dense vegetation and muskeg.

Benefication of an Oxidized Lead Ore from the Franklin Mine Lewis and Clark County

This thesis is concerned with the beneficiation of an oxidized lead ore. Emphasis was placed upon concentration by flotation rather than by gravity methods, although some investigation was made with the Wilfley shaking table. The concentration of lead minerals received most consideration in the problem, but wherever possible attempts were made to increase the silver and gold concentration along with the lead.

Assessing the Environmental Hazard of Using Seawater for Ore Processing at the Lasail Mine Site in the Sultanate of Oman

The Lasail mining area (Sultanate of Oman) was contaminated by acid mine drainage during the exploitation and processing of local and imported copper ore and the subsequent deposition of sulphide-bearing waste material into an unsealed tailings dump. In this arid environment, the use of seawater in the initial stages of ore processing caused saline contamination of the fresh groundwater downstream of the tailings dump. After detection of the contamination in the 1980s, different source-controlled remediation activities were conducted including a seepage water collection system and, in 2005, surface sealing of the tailings dump using an HDPE-liner to prevent further infiltration of meteoric water. We have been assessing the benefits of the remediation actions undertaken so far. We present chemical and isotopic (δ18O, δ 2H, 3H) groundwater data from a long-term survey (8–16 years) of the Wadi Suq aquifer along a 28 km profile from the tailings dump to the Gulf of Oman. Over this period, most metal concentrations in the Wadi Suq groundwater decreased below detection limits. In addition, in the first boreholes downstream of the tailings pond, the salinity contamination has decreased by 30 % since 2005. This decrease appears to be related to the surface coverage of the tailings pond, which reduces flushing of the tailings by the sporadic, but commonly heavy, precipitation events. Despite generally low metal concentrations and the decreased salinity, groundwater quality still does not meet the WHO drinking water guidelines in more than 90 % of the Wadi Suq aquifer area. The observations show that under arid conditions, use of seawater for ore processing or any other industrial activity has the potential to contaminate aquifers for decades.

Extensive boiling as a precipitation mechanism for precious and base metal ores, Bienaventurada Mine, Huancavelica, Perú

The Bienaventurada mine operates a polymetallic Ag-Pb-Zn (Cu, Au) vein system of the low sulphidation epithermal type. Fluid inclusions, FI, are abundant in quartz, sphalerite and adularia. FI petrography demonstrates typical primary growth zoning which occurs frequently in crystalline quartz, and defines the most common primary FI. These are usually very small, but several types of primary, P, and secondary, S, FI Assemblages (FIAs) comprising FI of measurable size (3 to > 100 μm) can also be identified through careful petrographic work. The fluids are aqueous and undersaturated, and no evidence of CO2 was found; the degree of fill is usually high (~70-80 %) in the L-rich inclusions, but extremely low in V-rich inclusions. The measured microthermometric values are very consistent in the FIAs selected; they are for the most part roughly similar in the P and S assemblages: the median is typically ~258ºC for total homogenization temperatures, Th, and -1.5 ºC for ice melting temperatures, Tm (corresponding to 2.57 wt% NaCl eq). The widespread occurrence of L-rich and V-rich FI in the same FIA and the consistent Th values point to an extensive boiling system along the vein. In these conditions, Th equals T of trapping, and the ores are assumed to have been precipitated from an aqueous low salinity boiling fluid, of likely meteoric origin, at some 250-280º C, under ~500 m hydrostatic head.

Subsidence investigations over a high-extraction retreat mine in Williamson County, Illinois : final report /

"Illinois Mine Subsidence Research Program"

Geology and ore deposits of the Afterthought Mine : Shasta County, California.

Mode of access: Internet.

40Ar/39Ar dating of Mn-iron ore of the Sapecado Mine, Qadrilatero Ferrifero, Brazil

The SW region of Amazonian craton presents policyclic evolution between 1.80-1.00 Ga and is comprised of the Rio Negro-Juruena, Rondoniana and Sunsas Provinces. The evolution of this region has being characterized by four orogens: Alto Jauru (1.79-1.74 Ga), Cachoeirinha (1.58-1.52 Ga), Suíte Santa Helena (1.45-1.42 Ga) e Sunsas/Aguapeí (1.0-0.9 Ga). The Alto Jauru orogen consists of TTG gneissic associations, greenstone sequences and intrusive granitoids origined in volcanic arc setting. Eight 40Ar/39Ar step-heating analyses were carried out in minerals (biotiteand hornblende) to investigate the thermal history and crustal evolution of this region. From the Alto Jauru orogen was sampled the gneiss banded and two biotite grains provide large dispersion of apparent ages, suggesting heterogenity in reservoir of the argon. Apparent age diagram yielded integrated ages of 1472 ± 6 Ma, interpreted as minimum ages of regional cooling episode. Three analyses of hornblende present ages varing from 1310 to 1400 Ma, possibly because smaller grain size become more susceptible to argon loss. 40Ar/39Ar step-heating methodology applied on biotite of pyroclastic tuff (U-Pb age about 1758 ± 7 Ma) presented integrated age of 1507 ± 7 Ma. The results found for this terrane demonstrated a geochronological correlation with metamorphic process linked Cachoeirinha orogen. Biotite and hornblende grains separates from granite and a tonalite origined during Cachoeirinha orogen were analyzed and the apparent age diagrams indicated well-defined plateau ages of 1520-1540 Ma. Biotite grains from a granitic sample were analized, and integrated ages about 1526 ± 2 Ma were obtained due argon loss in the initial steps. Thermochronologic history of SW region Amazonian craton is coherent with regional policyclic events and 40Ar/39Ar ages here presented probably correspond to regional cooling period of Cachoeirinha orogen.

Understanding arsenic mobility and speciation in lake sediments impacted by ore roasting near Giant mine, NWT

The roasting of gold-bearing arsenopyrite at Giant mine (Northwest Territories) between 1949 and 1999 released approximately 20,000 tonnes of toxic arsenic-bearing aerosols in the local aerial environment. Detailed examination of lake sediments, sediment porewaters, surface waters and lake hydrology sampled from three lakes of differing limnological characteristics was conducted in summer and winter conditions. Samples were analyzed for solid and dissolved elemental concentrations, speciation and mineralogy. The three lakes are located less than 5km from the mine roaster, and downwind, based on predominant wind direction. The objective of the study was to assess the controls on the mobility and fate of arsenic in these roaster-impacted subarctic lacustrine environments. Results show that the occurrence of arsenic trioxide in lake sediments coincides with the regional onset of industrial activities. The bulk of arsenic in sediments is contained in the form of secondary sulphide precipitates, with iron oxides hosting a minimal amount of arsenic near the surface-water interface. The presence of geogenic arsenic is likely contained as dilute impurities in common rock-forming minerals, and is not believed to be a significant source of arsenic to sediments, porewaters or lake waters. Furthermore, the well correlated depth-profiles of arsenic, antimony and gold in sediments may help reveal roaster impact. The soluble arsenic trioxide particles contained in sediments act as the primary source of arsenic into porewaters. Dissolved arsenic in reducing porewaters both precipitate as secondary sulphides in situ, and diffuse upwards into the overlying lake waters. Arsenic diffusion out of porewaters, combined with watercourse-driven residence time, are estimated to be the predominant mechanisms controlling arsenic concentrations in overlying lake waters. The sequestration of arsenic from porewaters as sulphide precipitates, in the study lakes, is not an effective process in keeping lake-water arsenic concentrations below guidelines for the protection of the freshwater environment and drinking water. Seasonal impacts on lake geochemistry derive from ice covering lake waters, cutting them off from of atmospheric oxygen, along with the exclusion of solutes from the ice. Such effects are limited in deep lakes but are can be an important factor controlling arsenic precipitation and mobility in ponds.

Were intercalated komatiites and dacites at the Black Swan nickel sulphide mine, Yilgarn Craton, Western Australia, emplaced as extrusive lavas or intrusive bodies? The significance of breccia textures and contact relationships

Intercalated Archean komatiites and dacites sit above a thick footwall dacite unit in the host rock succession at the Black Swan Nickel Mine, north of Kalgoorlie in the Yilgarn Craton, Western Australia. Both lithofacies occur in units that vary in scale from laterally extensive at the scale of the mine lease to localized, thin, irregular bodies, from > 100 m thick to only centimetres thick. Some dacites are only slightly altered and deformed, and are interpreted to post-date major deformation and alteration (late porphyries). However, the majority of the dacites display evidence of deformation, especially at contacts, and metamorphism, varying from silicification and chlorite alteration at contacts to pervasive low grade regional metamorphic alteration represented by common assemblages of chlorite, sericite and albite. Texturally, the dacites vary from entirely massive and coherent to partially brecciated to totally brecciated. Strangely, some dacites are coherent at the margins and brecciated internally. Breccia textures vary from cryptically defined, to blocky, closely packed, in situ jig-saw fit textures with secondary minerals in fractures between clasts, to more apparent matrix rich textures with round clast forms, giving apparent conglomerate textures. Some clast zones have multi-coloured clasts, giving the impression of varied provenance. Strangely however, all these textural variants have gradational relationships with each other, and no bedding or depositional structures are present. This indicates that all textures have an in situ origin. The komatiites are generally altered and pervasively carbonate veined. Preservation of original textures is patchy and local, but includes coarse adcumulate, mesocumulate, orthocumulate, crescumulate-harrisite and occasionally spinifex textures. Where original contacts between komatiites and dacites are preserved intact (i.e. not sheared or overprinted by alteration), the komatiites have chilled margins, whereas the dacites do not. The margins of the dacites are commonly silicified, and inclusions of dacite occur in komatiite, even at the top contacts of komatiite units, but komatiite clasts do not occur in the dacites. The komatiites therefore were emplaced as sills into the dacites, and the intercalated relationships are interpreted as intrusive. The brecciation and alteration in the dacites are interpreted as being largely due to hydraulic fracturing and alteration induced by contact metamorphic effects and hydrothermal alteration deriving from the intrusion of komatiites into the felsic pile. The absence of autobreccia and hyaloclastite textures in the dacites suggest that they were emplaced as an earlier intrusive (sill?) complex at a high level in the crust.