A method for Colletotrichum graminicola inoculation in maize stalks.

A podridão do colmo do milho causada por Colletotrichum graminicola causa perdas severas em lavouras de milho. Estudos com resistência de plantas e variabilidade genética do patógeno são necessários para o desenvol-vimento de estratégias de manejo desta doença. Por outro lado, há ausência de uma metodologia adequada para a inoculação de C. graminicola em colmos. O objetivo principal do trabalho foi estabelecer uma metodologia confiável e prática para a inoculação de C. graminicola. Foram avaliados três métodos de inoculação em colmo: palitos de dente colonizados por micélio; palitos de dente imersos em suspensão de conídios; e injeção de suspensão de conídios. Nós também determinamos o efeito da posição do entrenó inoculado, o estádio fenológico para a inoculação e o período de tempo ideal após a inoculação para avaliar a severidade da doença. O método de palitos de dente imersos em suspensão de conídios inoculado no terceiro entrenó no estádio fenológico de pendoamento (VT) e avaliado aos 30 dias após a inoculação obteve o melhor resultado. A metodologia foi validada em plantas cultivadas em condições de campo.

Avaliação do tratamento de sementes industrial com diferentes princípios ativos na cultura do milho.

2016

GESTÃO ESTRATÉGICA DE GOVERNOS LOCAIS E INSERÇÃO INTERNACIONAL: O REPENSAR DE ESCALAS GEOGRÁFICAS

A conjunção de dois eixos temáticos justifica a divulgação de alguns resultados apresentados neste texto. O primeiro deles é o de identificar as iniciativas desenvolvidas e a atuação dos governos locais do Centro-Sul do estado do Paraná para inserção nas relações internacionais, através da cooperação em políticas públicas estratégicas que promovam investimento e crescimento econômico associado às políticas de melhorias sociais. O segundo é o de investigar e avaliar até que ponto os governos locais detêm, criam estratégias e utilizam as oportunidades de atuação e expansão de seus limites e possibilidades, no plano internacional, por meio de demandas nos processos de integração regional (a exemplo das Associações de Municípios e os Consórcios Intermunicipais). O problema de pesquisa busca avaliar, assim, o “grau” de inserção internacional e se a mesma tem se constituído em potencial agente de desenvolvimento sócio-econômico regional, o que também contribui para o desenvolvimento do país em seu conjunto. A metodologia tem por fundamento entrevistas com gestores de projetos, bem como pesquisa em jornais e coleta de dados secundários a partir de 1988.

Ocorrência de Commelina villosa como planta daninha em áreas agrícolas no estado do Paraná-PR, Brasil

As trapoerabas pertencem à família Commelinaceae e são plantas daninhas de difícil controle em diferentes regiões do país. No Brasil, a espécie Commelina benghalensis destaca-se como a principal trapoeraba infestante nas culturas de soja, milho, café e citros. Outras duas espécies desse gênero, Commelina diffusa e Commelina erecta, também são conhecidas como infestantes de ocorrência freqüente no território nacional. Commelina villosa está registrada, até o momento, apenas para os Estados da Bahia e Goiás além do Distrito Federal. O presente trabalho teve como objetivos caracterizar e registrar a ocorrência de C. villosa no Estado do Paraná, onde pode estar sendo confundida com outras trapoerabas, principalmente C. benghalensis. Exemplares de C. villosa e C. benghalensis foram coletados, de forma aleatória, em lavouras de soja, feijão e milho, nos municípios de Ponta Grossa, Tibagi, Piraí do Sul, Guarapuava, Pato Branco, Francisco Beltrão, Cascavel, Campo Mourão e Londrina. Parte desse material foi herborizado para a confecção de exsicatas e outra parte foi mantida in vivo, cultivada no Departamento de Botânica, do Instituto de Biociências de Botucatu-UNESP. Caracteres morfológicos descritivos e quantitativos foram avaliados e as espécies comparadas entre si. C. villosa distinguiu-se de C. benghalensis por apresentar folhas maiores (9,76 x 3,26 cm), elíptica a elípticaestreita, sésseis, de coloração verde escura com manchas violáceas na face inferior, filetes translúcidos, entre outras características. A ocorrência de C. villosa no Paraná foi constatada em todos os municípios amostrados, com exceção de Campo Mourão e Londrina.

Variabilidade pluviométrica e a dinâmica atmosférica na bacia hidrográfica do rio Ivaí-PR

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Nuclear localization of NPR1 is required for activation of PR gene expression

Systemic acquired resistance (SAR) is a broad-spectrum resistance in plants that involves the upregulation of a battery of pathogenesis-related (PR) genes. NPR1 is a key regulator in the signal transduction pathway that leads to SAR. Mutations in NPR1 result in a failure to induce PR genes in systemic tissues and a heightened susceptibility to pathogen infection, whereas overexpression of the NPR1 protein leads to increased induction of the PR genes and enhanced disease resistance. We analyzed the subcellular localization of NPR1 to gain insight into the mechanism by which this protein regulates SAR. An NPR1–green fluorescent protein fusion protein, which functions the same as the endogenous NPR1 protein, was shown to accumulate in the nucleus in response to activators of SAR. To control the nuclear transport of NPR1, we made a fusion of NPR1 with the glucocorticoid receptor hormone binding domain. Using this steroid-inducible system, we clearly demonstrate that nuclear localization of NPR1 is essential for its activity in inducing PR genes.

Scaling of free convection heat transfer in a triangular cavity for Pr>1

Unsteady natural convection inside a triangular cavity subject to a non-instantaneous heating on the inclined walls in the form of an imposed temperature which increases linearly up to a prescribed steady value over a prescribed time is reported. The development of the flow from start-up to a steady-state has been described based on scaling analyses and direct numerical simulations. The ramp temperature has been chosen in such a way that the boundary layer is reached a quasi-steady mode before the growth of the temperature is completed. In this mode the thermal boundary layer at first grows in thickness, then contracts with increasing time. However, if the imposed wall temperature growth period is sufficiently short, the boundary layer develops differently. It is seen that the shape of many houses are isosceles triangular cross-section. The heat transfer process through the roof of the attic-shaped space should be well understood. Because, in the building energy, one of the most important objectives for design and construction of houses is to provide thermal comfort for occupants. Moreover, in the present energy-conscious society it is also a requirement for houses to be energy efficient, i.e. the energy consumption for heating or air-conditioning houses must be minimized.

Scaling analysis of the unsteady natural convection boundary layer adjacent to an inclined plate for Pr > 1 following instantaneous heating

The unsteady natural convection boundary layer adjacent to an instantaneously heated inclined plate is investigated using an improved scaling analysis and direct numerical simulations. The development of the unsteady natural convection boundary layer following instantaneous heating may be classified into three distinct stages including a start-up stage, a transitional stage and a steady state stage, which can be clearly identified in the analytical and numerical results. Major scaling relations of the velocity and thicknesses and the flow development time of the natural convection boundary layer are obtained using triple-layer integral solutions and verified by direct numerical simulations over a wide range of flow parameters.

Prandtl number scaling of the unsteady natural convection boundary layer adjacent to a vertical flat plate for Pr > 1 subject to ramp surface heat flux

It is found in the literature that the existing scaling results for the boundary layer thickness, velocity and steady state time for the natural convection flow over an evenly heated plate provide a very poor prediction of the Prandtl number dependency of the flow. However, those scalings provide a good prediction of two other governing parameters’ dependency, the Rayleigh number and the aspect ratio. Therefore, an improved scaling analysis using a triple-layer integral approach and direct numerical simulations have been performed for the natural convection boundary layer along a semi-infinite flat plate with uniform surface heat flux. This heat flux is a ramp function of time, where the temperature gradient on the surface increases with time up to some specific time and then remains constant. The growth of the boundary layer strongly depends on the ramp time. If the ramp time is sufficiently long, the boundary layer reaches a quasi steady mode before the growth of the temperature gradient is completed. In this mode, the thermal boundary layer at first grows in thickness and then contracts with increasing time. However, if the ramp time is sufficiently short, the boundary layer develops differently, but after the wall temperature gradient growth is completed, the boundary layer develops as though the startup had been instantaneous.

Structure and magnetotransport properties of the layered manganites REl.2Srl.8Mn,07(R E = La, Pr, Nd)

We have examined the magnetotransport properties and the structure, by Rietveld refinement of powder X-ray data, of the phases RE(1.2)Sr(1.8)Mn(2)O(7) (RE = La, Pr, Nd). We find that on cooling, La1.2Sr1.8Mn2O7 undergoes a transition to a nearly perfect ferromagnet with 90% magnetization at 1.45 T, as reported by earlier workers, but the Pr and Nd phases show only a small magnetization that grows gradually as the temperature is decreased. There seems to be significant correlation between electrical transport and the Jahn-Teller elongation of the apical Mn-O bonds in these systems. The elongation of the apical Mn-O bonds forces the nine-coordinate rock-salt site to be occupied preferentially by the smaller rare-earth-metal cations. This preferential occupation is reliably obtained from the X-ray refinement. All three title phases show a magnetoresistance ratio of about 4(corresponding to a magnetoresistance, [R(0)-R(H)]/R(0), of about 75%) at a field of 7 T and temperatures around 100 K.

Codoping Effect of Zn and Pr in YBa2Cu3O7-delta

In this paper we present the resistivity data for Pr and Zn codoped compound Y1-xPrxBa2[Cu1-yZny](3)O7-delta with 0 < y < 0.1 and x = 0.0, 0.1 and 0.2. The data is analysed in terms of the superconducting critical temperature T-c, residual resistivity rho(0) and the resistivity slope d rho/dT corresponding to the linear rho-T region. It is found that for x = 0.1 Pr has a minimal influence on the in-plane processes for Zn impurity alone affecting slightly T-c and rho(0). The slope dp/dT becomes larger for 0.03 < y < 0.06 leading to larger depining effect and hence slower fall of T, as a function of y. For x = 0.2 there is a drastic change, rho(0) becomes abnormally large, d rho/dT becomes negative implying absence of depinning and a totally pinned charge stripes. Superconductivity vanishes at y = 0.03. It is concluded that for x = 0.2 Pr converts the system from overdoped to underdoped region leading to the universal superconductor-insulator transition.

Structure of the noncubic phase in the ferroelectric state of Pr-substituted SrTiO3

Sr1−xPrxTiO3 has recently been shown to exhibit ferroelectricity at room temperature. In this paper powder x-ray and neutron-diffraction patterns of this system at room temperature have been analyzed to show that the system exhibits cubic (Pm-3m) structure for x<=0.05 and tetragonal (I4/mcm) for x>0.05. The redundancy of the noncentrosymmetric structural model (I4cm) in the ferroelectric state suggests the absence of long-range ordered ferroelectric domains and supports the relaxor ferroelectric model for this system.

Juedisch-Buergerliches Leben in Koenigsberg/Pr. 1880-1945 1880-1945

M.A. Thesis for the University of Goettingen (1987).

SUBSTITUTIONAL EFFECT OF Zn AND Pr IN YBa2Cu3O7-delta

The co-doping effect of Zn and Pr impurities in the compound of composition Y1-xPrxBa2[Cu1-yZny](3)O7-delta with x = 0.1, x = 0.2 and 0 <= y <= 0.1 has been investigated by analyzing the results of electrical resistivity measurements. It is found that for Pr substitution at x = 0.1, there is a minimal influence on in-plane processes, thereby slightly affecting T-c and residual resistivity rho(0), but with the resistivity slope d rho/dT becoming large for the range of y from 0.03 to 0.06, leading to a larger depinning effect. For x = 0.2 a drastic change is observed whereby rho(0) becomes abnormally large, and d rho/dT becomes negative, implying totally pinned charge stripes and no depinning. The second observation therefore suggests that Pr substitution converts the overdoped system to an optimally doped system, leading to the universal superconductor-insulator transition.

Anderson transitions in Ln1-xSrxCoO3 (Ln=Pr or Nd)

Electrical conductivity measurements show that Ln1-xSrxCoO3, (Ln = Pr or Nd) undergoes a non-metal-metal transition when x-0 3. The d.c. conductivity of compositions with 0prisingly, however, \delta seems to increase with increasing temperature. Thermopower measurements show clear evidence for a change in the mechanism of conduction (around 350 K) from variable range hopping to transport at Ec. All these transport properties suggest that Co4+ ions in Ln1-xSrxCoO3 (0