Electron mobility in few-layer MoxW1-xS2

Heterostructures of two-dimensional (2D) layered materials are increasingly being explored for electronics in order to potentially extend conventional transistor scaling and to exploit new device designs and architectures. Alloys form a key underpinning of any heterostructure device technology and therefore an understanding of their electronic properties is essential. In this paper, we study the intrinsic electron mobility in few-layer MoxW1-xS2 as limited by various scattering mechanisms. The room temperature, energy-dependent scattering times corresponding to polar longitudinal optical (LO) phonon, alloy and background impurity scattering mechanisms are estimated based on the Born approximation to Fermi's golden rule. The contribution of individual scattering rates is analyzed as a function of 2D electron density as well as of alloy composition in MoxW1-xS2. While impurity scattering limits the mobility for low carrier densities (<2-4x10(12) cm(-2)), LO polar phonon scattering is the dominant mechanism for high electron densities. Alloy scattering is found to play a non-negligible role for 0.5 < x < 0.7 in MoxW1-xS2. The LO phonon-limited and impurity-limited mobilities show opposing trends with respect to alloy mole fractions. The understanding of electron mobility in MoxW1-xS2 presented here is expected to enable the design and realization of heterostructures and devices based on alloys of MoS2 andWS(2).

Dynamic Inefficiency in an Overlapping Generation Economy with Pollution and Health Costs

Revised 2008-08.-- Published as an article in: Journal of Public Economic Theory (2008), 10(4), 563-594.

Investigations of charge-carrier dynamics at semiconductor/liquid interfaces

Theoretical and experimental investigations of charge-carrier dynamics at semiconductor/liquid interfaces, specifically with respect to interfacial electron transfer and surface recombination, are presented.

Fermi's golden rule has been used to formulate rate expressions for charge transfer of delocalized carriers in a nondegenerately doped semiconducting electrode to localized, outer-sphere redox acceptors in an electrolyte phase. The treatment allows comparison between charge-transfer kinetic data at metallic, semimetallic, and semiconducting electrodes in terms of parameters such as the electronic coupling to the electrode, the attenuation of coupling with distance into the electrolyte, and the reorganization energy of the charge-transfer event. Within this framework, rate constant values expected at representative semiconducting electrodes have been determined from experimental data for charge transfer at metallic electrodes. The maximum rate constant (i.e., at optimal exoergicity) for outer-sphere processes at semiconducting electrodes is computed to be in the range 10^-17-10^-16 cm⁴ s^-1, which is in excellent agreement with prior theoretical models and experimental results for charge-transfer kinetics at semiconductor/liquid interfaces.

Double-layer corrections have been evaluated for semiconductor electrodes in both depletion and accumulation conditions. In conjuction with the Gouy-Chapman-Stern model, a finite difference approach has been used to calculate potential drops at a representative solid/liquid interface. Under all conditions that were simulated, the correction to the driving force used to evaluate the interfacial rate constant was determined to be less than 2% of the uncorrected interfacial rate constant.

Photoconductivity decay lifetimes have been obtained for Si(111) in contact with solutions of CH₃OH or tetrahydrofuran containing one-electron oxidants. Silicon surfaces in contact with electrolyte solutions having Nernstian redox potentials > 0 V vs. SCE exhibited low effective surface recombination velocities regardless of the different surface chemistries. The formation of an inversion layer, and not a reduced density of electrical trap sites on the surface, is shown to be responsible for the long charge-carrier lifetimes observed for these systems. In addition, a method for preparing an air-stable, low surface recombination velocity Si surface through a two-step, chlorination/alkylation reaction is described.

Nonequilibrium dynamics of photoexcited electrons in graphene: Collinear scattering, Auger processes, and the impact of screening

We present a combined analytical and numerical study of the early stages (sub-100-fs) of the nonequilibrium dynamics of photoexcited electrons in graphene. We employ the semiclassical Boltzmann equation with a collision integral that includes contributions from electron-electron (e-e) and electron-optical phonon interactions. Taking advantage of circular symmetry and employing the massless Dirac fermion (MDF) Hamiltonian, we are able to perform an essentially analytical study of the e-e contribution to the collision integral. This allows us to take particular care of subtle collinear scattering processes - processes in which incoming and outgoing momenta of the scattering particles lie on the same line - including carrier multiplication (CM) and Auger recombination (AR). These processes have a vanishing phase space for two-dimensional MDF bare bands. However, we argue that electron-lifetime effects, seen in experiments based on angle-resolved photoemission spectroscopy, provide a natural pathway to regularize this pathology, yielding a finite contribution due to CM and AR to the Coulomb collision integral. Finally, we discuss in detail the role of physics beyond the Fermi golden rule by including screening in the matrix element of the Coulomb interaction at the level of the random phase approximation (RPA), focusing in particular on the consequences of various approximations including static RPA screening, which maximizes the impact of CM and AR processes, and dynamical RPA screening, which completely suppresses them. © 2013 American Physical Society.

The transfer of energy between electrons and ions in solids

In this review we consider those processes in condensed matter that involve the irreversible flow of energy between electrons and nuclei that follows from a system being taken out of equilibrium. We survey some of the more important experimental phenomena associated with these processes, followed by a number of theoretical techniques for studying them. The techniques considered are those that can be applied to systems containing many nonequivalent atoms. They include both perturbative approaches (Fermi's Golden Rule and non-equilibrium Green's functions) and molecular dynamics based (the Ehrenfest approximation, surface hopping, semi-classical Gaussian wavefunction methods and correlated electron-ion dynamics). These methods are described and characterized, with indications of their relative merits.

Etude théorique des propriétés électroniques et optiques des super-réseaux de Si/SiO2

FRANCAIS: L'observation d'une intense luminescence dans les super-réseaux de Si/SiO2 a ouvert de nouvelles avenues en recherche théorique des matériaux à base de silicium, pour des applications éventuelles en optoélectronique. Le silicium dans sa phase cristalline possède un gap indirect, le rendant ainsi moins intéressant vis-à-vis d'autres matériaux luminescents. Concevoir des matériaux luminescents à base de silicium ouvrira donc la voie sur de multiples applications. Ce travail fait état de trois contributions au domaine. Premièrement, différents modèles de super-réseaux de Si/SiO2 ont été conçus et étudiés à l'aide de calculs ab initio afin d'en évaluer les propriétés structurales, électroniques et optiques. Les deux premiers modèles dérivés des structures cristallines du silicium et du dioxyde de silicium ont permis de démontrer l'importance du rôle de l'interface Si/SiO2 sur les propriétés optiques. De nouveaux modèles structurellement relaxés ont alors été construits afin de mieux caractériser les interfaces et ainsi mieux évaluer la portée du confinement sur les propriétés optiques. Deuxièmement, un gap direct dans les modèles structurellement relaxés a été obtenu. Le calcul de l'absorption (par l'application de la règle d'or de Fermi) a permis de confirmer que les propriétés d'absorption (et d'émission) du silicium cristallin sont améliorées lorsque celui-ci est confiné par le SiO2. Un décalage vers le bleu avec accroissement du confinement a aussi été observé. Une étude détaillée du rôle des atomes sous-oxydés aux interfaces a de plus été menée. Ces atomes ont le double effet d'accroître légèrement le gap d'énergie et d'aplanir la structure électronique près du niveau de Fermi. Troisièmement, une application directe de la théorique des transitions de Slater, une approche issue de la théorie de la fonctionnelle de la densité pour des ensembles, a été déterminée pour le silicium cristallin puis comparée aux mesures d'absorption par rayons X. Une très bonne correspondance entre cette théorie et l'expérience est observée. Ces calculs ont été appliqués aux super-réseaux afin d'estimer et caractériser leurs propriétés électroniques dans la zone de confinement, dans les bandes de conduction.

Utilidad de la relación estratégica comunitaria y el marketing en el sector de bebidas alcohólicas

El estudio busca demostrar la utilidad que tiene la relación estratégica comunitaria en el sector de bebidas alcohólicas en Colombia y cómo la utilizan a través del marketing. Cómo estas funcionan en el sector y si las organizaciones las están aplicando; si lo hacen qué tipo de estrategias emplean para adentrarse y relacionarse con su entorno. Se identifica la efectividad de estas estrategias; si en realidad están promoviendo el desarrollo de la comunidad como el de la organización y paso a seguir se describen las características de esta en el sector objetivo. Se utilizan metodologías tanto cuantitativas como cualitativas para la investigación y análisis de caso analizando la información correspondiente para así poder reseñar y describir los modelos que se utilizan en el sector.

La presión laboral tendenciosa (Mobbing)

El trabajo de investigación surge en el año 2001, ante la necesidad de hacer frente a una nueva realidad jurídica, el mobbing. Para ello fue decisivo el estudio de lo publicado (básicamente de ramas ajenas al Derecho) pero sobre todo las entrevistas con las víctimas de mobbing y sus asociaciones; este extremo, unido a la ausencia de un tratamiento internacional, obligó a un camino autodidacta para definir mobbing jurídicamente. La Tesis define mobbing como la presión laboral tendente a la autoeliminación de un trabajador mediante su denigración (presión laboral tendenciosa), y con ello por primera vez se tiene una definición de mobbing en línea y media, con plena validez jurídica, que es susceptible de ser memorizada y por lo tanto divulgada, para corregir el problema. El denominado "concepto uniformado de mobbing" recalca la denigración como mecanismo frente a los tratos degradantes y recalca la autoeliminación como finalidad de un comportamiento doloso. El trabajo aporta fórmulas para deslindar casos de mobbing de otras figuras próximas, y en este sentido debe citarse "la regla del 9" para saber si hay mobbing; en sede de estadísticas se critican metodológicamente muchas de ellas presentadas hasta el momento y se aporta alguna en sede de Tribunales; pero sobre todo se advierte de los riesgos jurídicos de una previsible regulación específica antimobbing, mediante el examen de las distintas definiciones que se han esgrimido hasta el momento. La segunda parte de la Tesis profundiza sobre el grado de sensibilización de nuestro ordenamiento jurídico y Tribunales, a cuyo fin se ha trabajado con más de un centernar y medio de sentencias dictadas sobre la materia, y por supuesto la totalidad de las recogidas en las bases de datos de las editoriales. El análisis sirve para apreciar la bondad de la sistemática aquí defendida, poniendo en evidencia errores, y contradicciones. La Tesis advierte que la presión laboral tendenciosa más allá de vulnerar el derecho constitucional al trabajo, o los derechos fundamentales a la integridad moral y el honor, es una transgresión a todo un "espíritu constitucional", y en este sentido se analiza con detalle tanto la posibilidad de recurrir en amparo, como el derecho a la indemnidad para quien se enfrenta a esta situación. Advirtiendo de las ventajas de efectuar esta reacción mediante la modalidad procesal de tutela de los derechos fundamentales, se analiza la recurrida acción del art.50 ET, donde se realizan aportaciones sugerentes como el plazo prescripción o la "doctrina de los antecedentes", y se otorgan respuestas a las preguntas sobre obligación de seguir trabajando y ejecución provisional. En sede de acciones de Seguridad Social, la Tesis distingue entre la incapacidad temporal y permanente (depresiones) y la muerte y supervivencia, aportándose sobre la primera la técnica denominada "interpretación en tres niveles" y descartando la posibilidad de considerar accidente de trabajo el suicidio tras un mobbing por imperativo legal, pero aportando un sucedáneo bastante razonable como es el accidente no laboral. Junto a ello se razona por la viabilidad del recargo del art.123 LGSS. Civilmente, la Tesis se posiciona de "lege ferenda" por reconducir este tipo de acciones resarcitorias del daño psíquico y moral al orden civil, por una mayor explicación sobre el origen del quantum, pero sobre todo considera inadmisible la STS 11-3-04, y ello por una pluralidad de argumentos, pero sobre todo por cuanto viene a autorizar "de facto" este tipo de conductas. La posibilidad de accionar administrativamente frente a este riesgo psicosocial se analiza en un doble terreno, la empresa y la Administración. Si bien el cauce sobre el primero tiene algunos meandros que se desbelan, la situación es radicalmente frustrante en la Administración -donde se encuentra el mayor caldo de cultivo del mobbing- , y ello por el RD 707/2002, pero todavía en mayor medida por el Criterio Técnico 34/2003 mediante el cual la interpretación del Director General de la Inspección de Trabajo y Seguridad Social ha venido tácitamente a derogar parcialmente la Ley de Prevención de Riesgos Laborales para la Administración. En materia penal, la Tesis se decanta "a priori" por dos tipos penales, los delitos contra los derechos de los trabajadores, y el delito de trato degradante; sin embargo, en la práctica sólo este segundo es el camino que puede alcanzar buen puerto. Finalmente se realiza un estudio detallado de la Ley 62/2003, ley que se divulgó como reguladora del acoso moral, y que después se defiende como un avance frente al mobbing. La Tesis advierte que no es cierto ni lo uno, ni lo otro, habiendo creado un "espejismo legal" que puede perjudicar a las víctimas de mobbing, además de no servir su estructura para una futura regulación explícita antimobbing.

On choice of technique in the Robinson-Solow-Srinivasan model

We report results on the optimal \choice of technique" in a model originally formulated by Robinson, Solow and Srinivasan (henceforth, the RSS model) and further discussed by Okishio and Stiglitz. By viewing this vintage-capital model without discounting as a speci c instance of the general theory of intertemporal resource allocation associated with Brock, Gale and McKenzie, we resolve longstanding conjectures in the form of theorems on the existence and price support of optimal paths, and of conditions suÆcient for the optimality of a policy rst identi ed by Stiglitz. We dispose of the necessity of these conditions in surprisingly simple examples of economies in which (i) an optimal path is periodic, (ii) a path following Stiglitz' policy is bad, and (iii) there is optimal investment in di erent vintages at di erent times. (129 words)

Age Related Differences in Individual Quality of Life Domains in Youth with Type 1 Diabetes.

BACKGROUND: Investigating individual, as opposed to predetermined, quality of life domains may yield important information about quality of life. This study investigated the individual quality of life domains nominated by youth with type 1 diabetes. METHODS: Eighty young people attending a diabetes summer camp completed the Schedule for the Evaluation of Individual Quality of Life-Direct Weighting interview, which allows respondents to nominate and evaluate their own quality of life domains. RESULTS: The most frequently nominated life domains were 'family', 'friends', 'diabetes', 'school', and 'health' respectively; ranked in terms of importance, domains were 'religion', 'family', 'diabetes', 'health', and 'the golden rule'; ranked in order of satisfaction, domains were 'camp', 'religion', 'pets', and 'family' and 'a special person' were tied for fifth. Respondent age was significantly positively associated with the importance of 'friends', and a significantly negatively associated with the importance of 'family'. Nearly all respondents nominated a quality of life domain relating to physical status, however, the specific physical status domain and the rationale for its nomination varied. Some respondents nominated 'diabetes' as a domain and emphasized diabetes 'self-care behaviors' in order to avoid negative health consequences such as hospitalization. Other respondents nominated 'health' and focused more generally on 'living well with diabetes'. In an ANOVA with physical status domain as the independent variable and age as the dependent variable, participants who nominated 'diabetes' were younger (M = 12.9 years) than those who nominated 'health' (M = 15.9 years). In a second ANOVA, with rationale for nomination the physical status domain as the independent variable, and age as the dependent variable, those who emphasized 'self care behaviors' were younger (M = 11.8 years) than those who emphasized 'living well with diabetes' (M = 14.6 years). These differences are discussed in terms of cognitive development and in relation to the decline in self-care and glycemic control often observed during adolescence. CONCLUSIONS: Respondents nominated many non-diabetes life domains, underscoring that QOL is multidimensional. Subtle changes in conceptualization of diabetes and health with increasing age may reflect cognitive development or disease adjustment, and speak to the need for special attention to adolescents. Understanding individual quality of life domains can help clinicians motivate their young patients with diabetes for self-care. Future research should employ a larger, more diverse sample, and use longitudinal designs.

Photon Management Structures for Absorption Enhancement in Intermediate Band Solar Cells and Crystalline Silicon Solar Cells

El objetivo de la tesis es investigar los beneficios que el atrapamiento de la luz mediante fenómenos difractivos puede suponer para las células solares de silicio cristalino y las de banda intermedia. Ambos tipos de células adolecen de una insuficiente absorción de fotones en alguna región del espectro solar. Las células solares de banda intermedia son teóricamente capaces de alcanzar eficiencias mucho mayores que los dispositivos convencionales (con una sola banda energética prohibida), pero los prototipos actuales se resienten de una absorción muy débil de los fotones con energías menores que la banda prohibida. Del mismo modo, las células solares de silicio cristalino absorben débilmente en el infrarrojo cercano debido al carácter indirecto de su banda prohibida. Se ha prestado mucha atención a este problema durante las últimas décadas, de modo que todas las células solares de silicio cristalino comerciales incorporan alguna forma de atrapamiento de luz. Por razones de economía, en la industria se persigue el uso de obleas cada vez más delgadas, con lo que el atrapamiento de la luz adquiere más importancia. Por tanto aumenta el interés en las estructuras difractivas, ya que podrían suponer una mejora sobre el estado del arte. Se comienza desarrollando un método de cálculo con el que simular células solares equipadas con redes de difracción. En este método, la red de difracción se analiza en el ámbito de la óptica física, mediante análisis riguroso con ondas acopladas (rigorous coupled wave analysis), y el sustrato de la célula solar, ópticamente grueso, se analiza en los términos de la óptica geométrica. El método se ha implementado en ordenador y se ha visto que es eficiente y da resultados en buen acuerdo con métodos diferentes descritos por otros autores. Utilizando el formalismo matricial así derivado, se calcula el límite teórico superior para el aumento de la absorción en células solares mediante el uso de redes de difracción. Este límite se compara con el llamado límite lambertiano del atrapamiento de la luz y con el límite absoluto en sustratos gruesos. Se encuentra que las redes biperiódicas (con geometría hexagonal o rectangular) pueden producir un atrapamiento mucho mejor que las redes uniperiódicas. El límite superior depende mucho del periodo de la red. Para periodos grandes, las redes son en teoría capaces de alcanzar el máximo atrapamiento, pero sólo si las eficiencias de difracción tienen una forma peculiar que parece inalcanzable con las herramientas actuales de diseño. Para periodos similares a la longitud de onda de la luz incidente, las redes de difracción pueden proporcionar atrapamiento por debajo del máximo teórico pero por encima del límite Lambertiano, sin imponer requisitos irrealizables a la forma de las eficiencias de difracción y en un margen de longitudes de onda razonablemente amplio. El método de cálculo desarrollado se usa también para diseñar y optimizar redes de difracción para el atrapamiento de la luz en células solares. La red propuesta consiste en un red hexagonal de pozos cilíndricos excavados en la cara posterior del sustrato absorbente de la célula solar. La red se encapsula en una capa dieléctrica y se cubre con un espejo posterior. Se simula esta estructura para una célula solar de silicio y para una de banda intermedia y puntos cuánticos. Numéricamente, se determinan los valores óptimos del periodo de la red y de la profundidad y las dimensiones laterales de los pozos para ambos tipos de células. Los valores se explican utilizando conceptos físicos sencillos, lo que nos permite extraer conclusiones generales que se pueden aplicar a células de otras tecnologías. Las texturas con redes de difracción se fabrican en sustratos de silicio cristalino mediante litografía por nanoimpresión y ataque con iones reactivos. De los cálculos precedentes, se conoce el periodo óptimo de la red que se toma como una constante de diseño. Los sustratos se procesan para obtener estructuras precursoras de células solares sobre las que se realizan medidas ópticas. Las medidas de reflexión en función de la longitud de onda confirman que las redes cuadradas biperiódicas consiguen mejor atrapamiento que las uniperiódicas. Las estructuras fabricadas se simulan con la herramienta de cálculo descrita en los párrafos precedentes y se obtiene un buen acuerdo entre la medida y los resultados de la simulación. Ésta revela que una fracción significativa de los fotones incidentes son absorbidos en el reflector posterior de aluminio, y por tanto desaprovechados, y que este efecto empeora por la rugosidad del espejo. Se desarrolla un método alternativo para crear la capa dieléctrica que consigue que el reflector se deposite sobre una superficie plana, encontrándose que en las muestras preparadas de esta manera la absorción parásita en el espejo es menor. La siguiente tarea descrita en la tesis es el estudio de la absorción de fotones en puntos cuánticos semiconductores. Con la aproximación de masa efectiva, se calculan los niveles de energía de los estados confinados en puntos cuánticos de InAs/GaAs. Se emplea un método de una y de cuatro bandas para el cálculo de la función de onda de electrones y huecos, respectivamente; en el último caso se utiliza un hamiltoniano empírico. La regla de oro de Fermi permite obtener la intensidad de las transiciones ópticas entre los estados confinados. Se investiga el efecto de las dimensiones del punto cuántico en los niveles de energía y la intensidad de las transiciones y se obtiene que, al disminuir la anchura del punto cuántico respecto a su valor en los prototipos actuales, se puede conseguir una transición más intensa entre el nivel intermedio fundamental y la banda de conducción. Tomando como datos de partida los niveles de energía y las intensidades de las transiciones calculados como se ha explicado, se desarrolla un modelo de equilibrio o balance detallado realista para células solares de puntos cuánticos. Con el modelo se calculan las diferentes corrientes debidas a transiciones ópticas entre los numerosos niveles intermedios y las bandas de conducción y de valencia bajo ciertas condiciones. Se distingue de modelos de equilibrio detallado previos, usados para calcular límites de eficiencia, en que se adoptan suposiciones realistas sobre la absorción de fotones para cada transición. Con este modelo se reproducen datos publicados de eficiencias cuánticas experimentales a diferentes temperaturas con un acuerdo muy bueno. Se muestra que el conocido fenómeno del escape térmico de los puntos cuánticos es de naturaleza fotónica; se debe a los fotones térmicos, que inducen transiciones entre los estados excitados que se encuentran escalonados en energía entre el estado intermedio fundamental y la banda de conducción. En el capítulo final, este modelo realista de equilibrio detallado se combina con el método de simulación de redes de difracción para predecir el efecto que tendría incorporar una red de difracción en una célula solar de banda intermedia y puntos cuánticos. Se ha de optimizar cuidadosamente el periodo de la red para equilibrar el aumento de las diferentes transiciones intermedias, que tienen lugar en serie. Debido a que la absorción en los puntos cuánticos es extremadamente débil, se deduce que el atrapamiento de la luz, por sí solo, no es suficiente para conseguir corrientes apreciables a partir de fotones con energía menor que la banda prohibida en las células con puntos cuánticos. Se requiere una combinación del atrapamiento de la luz con un incremento de la densidad de puntos cuánticos. En el límite radiativo y sin atrapamiento de la luz, se necesitaría que el número de puntos cuánticos de una célula solar se multiplicara por 1000 para superar la eficiencia de una célula de referencia con una sola banda prohibida. En cambio, una célula con red de difracción precisaría un incremento del número de puntos en un factor 10 a 100, dependiendo del nivel de la absorción parásita en el reflector posterior. Abstract The purpose of this thesis is to investigate the benefits that diffractive light trapping can offer to quantum dot intermediate band solar cells and crystalline silicon solar cells. Both solar cell technologies suffer from incomplete photon absorption in some part of the solar spectrum. Quantum dot intermediate band solar cells are theoretically capable of achieving much higher efficiencies than conventional single-gap devices. Present prototypes suffer from extremely weak absorption of subbandgap photons in the quantum dots. This problem has received little attention so far, yet it is a serious barrier to the technology approaching its theoretical efficiency limit. Crystalline silicon solar cells absorb weakly in the near infrared due to their indirect bandgap. This problem has received much attention over recent decades, and all commercial crystalline silicon solar cells employ some form of light trapping. With the industry moving toward thinner and thinner wafers, light trapping is becoming of greater importance and diffractive structures may offer an improvement over the state-of-the-art. We begin by constructing a computational method with which to simulate solar cells equipped with diffraction grating textures. The method employs a wave-optical treatment of the diffraction grating, via rigorous coupled wave analysis, with a geometric-optical treatment of the thick solar cell bulk. These are combined using a steady-state matrix formalism. The method has been implemented computationally, and is found to be efficient and to give results in good agreement with alternative methods from other authors. The theoretical upper limit to absorption enhancement in solar cells using diffractions gratings is calculated using the matrix formalism derived in the previous task. This limit is compared to the so-called Lambertian limit for light trapping with isotropic scatterers, and to the absolute upper limit to light trapping in bulk absorbers. It is found that bi-periodic gratings (square or hexagonal geometry) are capable of offering much better light trapping than uni-periodic line gratings. The upper limit depends strongly on the grating period. For large periods, diffraction gratings are theoretically able to offer light trapping at the absolute upper limit, but only if the scattering efficiencies have a particular form, which is deemed to be beyond present design capabilities. For periods similar to the incident wavelength, diffraction gratings can offer light trapping below the absolute limit but above the Lambertian limit without placing unrealistic demands on the exact form of the scattering efficiencies. This is possible for a reasonably broad wavelength range. The computational method is used to design and optimise diffraction gratings for light trapping in solar cells. The proposed diffraction grating consists of a hexagonal lattice of cylindrical wells etched into the rear of the bulk solar cell absorber. This is encapsulated in a dielectric buffer layer, and capped with a rear reflector. Simulations are made of this grating profile applied to a crystalline silicon solar cell and to a quantum dot intermediate band solar cell. The grating period, well depth, and lateral well dimensions are optimised numerically for both solar cell types. This yields the optimum parameters to be used in fabrication of grating equipped solar cells. The optimum parameters are explained using simple physical concepts, allowing us to make more general statements that can be applied to other solar cell technologies. Diffraction grating textures are fabricated on crystalline silicon substrates using nano-imprint lithography and reactive ion etching. The optimum grating period from the previous task has been used as a design parameter. The substrates have been processed into solar cell precursors for optical measurements. Reflection spectroscopy measurements confirm that bi-periodic square gratings offer better absorption enhancement than uni-periodic line gratings. The fabricated structures have been simulated with the previously developed computation tool, with good agreement between measurement and simulation results. The simulations reveal that a significant amount of the incident photons are absorbed parasitically in the rear reflector, and that this is exacerbated by the non-planarity of the rear reflector. An alternative method of depositing the dielectric buffer layer was developed, which leaves a planar surface onto which the reflector is deposited. It was found that samples prepared in this way suffered less from parasitic reflector absorption. The next task described in the thesis is the study of photon absorption in semiconductor quantum dots. The bound-state energy levels of in InAs/GaAs quantum dots is calculated using the effective mass approximation. A one- and four- band method is applied to the calculation of electron and hole wavefunctions respectively, with an empirical Hamiltonian being employed in the latter case. The strength of optical transitions between the bound states is calculated using the Fermi golden rule. The effect of the quantum dot dimensions on the energy levels and transition strengths is investigated. It is found that a strong direct transition between the ground intermediate state and the conduction band can be promoted by decreasing the quantum dot width from its value in present prototypes. This has the added benefit of reducing the ladder of excited states between the ground state and the conduction band, which may help to reduce thermal escape of electrons from quantum dots: an undesirable phenomenon from the point of view of the open circuit voltage of an intermediate band solar cell. A realistic detailed balance model is developed for quantum dot solar cells, which uses as input the energy levels and transition strengths calculated in the previous task. The model calculates the transition currents between the many intermediate levels and the valence and conduction bands under a given set of conditions. It is distinct from previous idealised detailed balance models, which are used to calculate limiting efficiencies, since it makes realistic assumptions about photon absorption by each transition. The model is used to reproduce published experimental quantum efficiency results at different temperatures, with quite good agreement. The much-studied phenomenon of thermal escape from quantum dots is found to be photonic; it is due to thermal photons, which induce transitions between the ladder of excited states between the ground intermediate state and the conduction band. In the final chapter, the realistic detailed balance model is combined with the diffraction grating simulation method to predict the effect of incorporating a diffraction grating into a quantum dot intermediate band solar cell. Careful optimisation of the grating period is made to balance the enhancement given to the different intermediate transitions, which occur in series. Due to the extremely weak absorption in the quantum dots, it is found that light trapping alone is not sufficient to achieve high subbandgap currents in quantum dot solar cells. Instead, a combination of light trapping and increased quantum dot density is required. Within the radiative limit, a quantum dot solar cell with no light trapping requires a 1000 fold increase in the number of quantum dots to supersede the efficiency of a single-gap reference cell. A quantum dot solar cell equipped with a diffraction grating requires between a 10 and 100 fold increase in the number of quantum dots, depending on the level of parasitic absorption in the rear reflector.

Mathematics notebook, ca. 1714-1718, with chronology of the reign of Augustus

The first two pages of this notebook contain a comparative chronology of the reign of Augustus, outlined in two columns. One column outlines the chronology according to ecclesiastical scholar Laurence Echard, and the other column outlines the chronology according to William Cave. The rest of the notebook contains extensive entries on the following subjects, with related rules, problems, and illustrations: fractions, decimals, arithmetical progression, geometrical progression, "disjunct proportion, or ye Golden Rule," signs and symbols, integers, geometrical definitions, and Euclidian geometry.

In sickness and in health: protecting and supporting public investment in Europe. Bruegel Policy Contribution 2014/02, February 2014

The long-term decline in gross public investment in European Union countries mirrors the trend in other advanced economies, but recent developments have been different: public investment has increased elsewhere, but in the EU it has declined and even collapsed in the most vulnerable countries, exaggerating the output fall. The provisions in the EU fiscal framework to support public investment are very weak.The recently inserted ‘investment clause’ is almost no help. In the short term, exclusion of national co-funding of EU-supported investments from the fiscal indicators considered in the Stability and Growth Pact would be sensible. In the medium term, the EU fiscal framework should be extended with an asymmetric ‘golden rule’ to further protect public investment in bad times, while limiting adverse incentives in good times. During a downturn, a European investment programme is needed and the European Semester should encourage greater investment by member states with healthy public finances and low public investment rates. Reform and harmonisation of budgeting, accounting, transparency and project assessment is also needed to improve the quality of public investment.

Growth for Europe – Is the Juncker Plan the answer? EPC Discussion Paper, 20 March 2015

Executive Summary. The euro area is still suffering from low growth and high unemployment. For the recovery to become a reality, there needs to be a balance between fiscal discipline, supply side improvements and actions aimed at stimulating demand and growth. Increasing investment, both private and public, are important components in overcoming the recession. This becomes especially clear when comparing investment dynamics during the crisis with pre-crisis levels. Total investment is still much lower than before the crisis and public investment is well below its pre-crisis peak as well. In late November 2014, European Commission President Jean-Claude Juncker submitted a long-awaited proposal for a European Investment Plan that aims to stimulate private investment. Apart from the creation of the new European Fund for Strategic Investment (EFSI), through which private investors will receive public guarantees, the investment plan also aims to provide project assistance and improve the Single Market by removing sector-specific or other financial barriers to investment. While generally perceived as a first positive step towards increasing private investment, some commentators have expressed reservations about the plan. These include, among others, the lack of fresh money for the initial contributions to EFSI. Since a substantial amount of these contributions is reshuffled from other places in the European budget, the question was raised whether EFSI can fund additional projects or just replicates investment projects that would have happened without the plan. Other criticism relates to the high estimate of the expected leverage ratio of 1:15, and to the risk that the plan will only have a limited impact on stressed economies. The Juncker Plan addresses private investment, but so far there really is no clear strategy to stimulate productive public investment on the European and national level. Countries with fiscal space are reluctant to engage in higher spending, while those willing and in need of it the most are restricted by the rules. Member States and the Commission should therefore discuss options for further improving the euro area's economic governance. In addition to urging countries with fiscal space to increase investing in national public goods, investment could be treated with budget flexibility. One could, for instance, upgrade the importance of public investment in the European Semester. Additional deficit granted for public investment purposes could be attached to certain Country-Specific Recommendations. Another solution would be to allow some form of budget flexibility, such as the formulation of a new Golden Rule for productive public investment becoming part of the Stability and Growth Pact's application. Besides relying on a larger amount of flexibility in the rules, the Financial Transaction Tax (FTT) could be another solution to fund investment in European public goods. It will also be necessary to overcome the mistrust among Member States that is preventing further action. The political bargain of stronger conditionality, such as through contractual arrangements, could improve the situation. Increased trust will also be an important condition for tackling long-reaching economic governance reforms such as the creation of a Fiscal Capacity, which could take the form of a macroeconomic shock insurance. Such a Fiscal Capacity could make a real difference in providing the necessary funding to maintain productive public investment, even in times of deep recessions. The proposals presented do not attempt to be conclusive, but shall rather be an input for a wider debate on how to increase growth and employment in Europe. The paper draws heavily on the discussion of a Workshop on Growth and Investment, which the European Policy Centre (EPC) hosted on 10 December 2014 under Chatham-House Rule, with a group of economists and representatives from the European institutions.

A preface to politics,

Routineer and inventor.--The taboo.--The changing focus.--The golden rule and after.--Well meaning but unmeaning: the Chicago vice report.--Some necessary iconoclasm.--The making of creeds.--The red herring.--Revolution and culture.